Ethernet connection very slow.FIOS.. Help
All of a sudden, when I turned my mac on today and booted up Firefox, my connection was incredibly slow(almost taking 1-2 minutes to load a normal page). Some pages aren't even loading. It seems very out of the ordinary
-I figured maybe it was just Firefox, so I turned on Safari...nothing
-I figured it was disk space, so I freed up 18 gigs of 80...nothing
-I figured it was the ethernet cable, so i ran a network diagnostic check...it said My internet connection was fine
-I figured maybe I had a bad wire or something, so I plugged in in another room where another Computer regularly plugs in...still slow.
-The other computer currently plugged into the router is still going strong.
-I tried resetting it, by turning the router off and letting it set....nothing
-I'm not sure if it matters but the cable I use, is used for both my xbox360 and my mac...and it works fine with xbox live. So Im assuming the connection is good.
-I ran Clam, and I can't find any trojans(or any files to my knowledge of being corrupt)
Can anyone help me out?
I took mine in yesterday and payed $80 for them to look at it because I don't have warranty anymore, they told me that it may be a router issue. I took the computer to my girlfriends house where she has a Time Capsule and it worked amazing. So be careful taking your computer to the shop. They may not be able to help you that much.
Similar Messages
-
New broadband connection - very slow- please help
Hi,
On 3rd of May (last Thur) I got my new phone and broadband installed. My broadband speed is soo slow that I have to buy internet dongle to get back onto proper internet.
I know about 10 days stabilization period- phoned to India couple of times and being told after 10 days I will get a better normal connection. I just dont belive that. Today is 8th day of 10days waiting and there is no changes at all! I need internet for my uni.
Please can sameone help me? any advice?
thank u in advance
1) I am connected to the master socket. I've tried to connect to test socket but things weren/t going improve.
2) Tried wireless connection and used ethernet cable. For both connections the broadband is slow.
3) Done the quiet line test- no faults.
4)
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 0 days, 01:19:22
Downstream: 5.555 Mbps
Upstream: 800 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Fast
Noise margin (Down/Up): 6.5 dB / 5.7 dB
Line attenuation (Down/Up): 47.4 dB / 29.5 dB
Output power (Down/Up): 20.0 dBm / 12.8 dBm
FEC Events (Down/Up): 0 / 0
CRC Events (Down/Up): 78942 / 306
Software version 4.7.5.1.83.8.57.1.3 (Type A) | Time and date 20:34 11/05/12
5)Beta speedtest
download speed: 0,32
upload speed: 0,63
Ping Latency: 37,88Here are some help pages done by CL Keith http://www.btinternet.com/~cbeddoe/speed/Speed.html
also post your full hub stats details shown in this link http://www.btinternet.com/~cbeddoe/others/adslstats.html
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Hello!
I have a printer connected to the Extreme Base on the Ethernet port, and it’s EXTREMELY slow, a 10 MB PDF file takes over 2 hours to transfer. The printers ethernet card runs @ 100 Mbps.
The internet connection is just fine, the multicast rate is at 11, I have interference roubustness on, and the the aiirport signal is at it's max.
Thanks for your input.Well......... It seems to be working fine for now, I just did a hard restart for the Airport.
The strange thing about it is that it used to work fine with same files, so why is it slowing down now? I just don't get it.
sorry about the duplica. How can I delete it?
––––––––––––––––––––––––––––––––––––––––––– -
Internet connection very very slow and it takes 6 hours to download IOS 5 which by that time I am timed out . Can anyone help
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Internet connection very slow - ISP blames my computer...
Greetings,
I have DSL connection that has been running very very slow... dialup slow... I use airport, so I unplugged it and connected the ethernet cable directly to the comp - with no results.
I called my ISP, they tested the modem speed, reset the modem & went through all the settings - with no results. The modem speed is fine, so they say the problem is with my powerbook. I've rebooted the computer numerous times, also I recently cleaned up my hard drive (which has been full for months) and I currently have 14gb of free space.
What else can I do? Are there any diagnostic utilities/etc you can recommend?
Thank you in advance for all your help.
powerbook g4 Mac OS X (10.3.9)You actually are close enough to their 3meg down that you can't complain. 2.8meg down and 700kb up is fine, unless it's supposed to be their FIOS that is.
Sounds like it is the site(s) that are slow, like these boards at times.
Joe -
Adobe Photoshop CC2014 internet connection very slow
Hi,
I'm developing an Adobe Photoshop HTML5 (website) extension. This is working fine in Photoshop CC, but is very slow in CC2014.
Today I've installed an update for Photoshop CC2014 and I was presented with an 'introduction' screen, loaded from the web.
This had the same slowness, indicating my extension is not at fault.
The regular functionality of Photoshop has a normal speed, and I'm working on a recent computer with Win 7 64bit.
I've recorded a video showing how slow it really is (and proof that my internet connection has sufficient speed)
http://videobam.com/gmNun
How can I solve this?
Thanks!
SamJust checked, same problem for other users
This is what's in help > system info:
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2693 MHz
Built-in memory: 8097 MB
Free memory: 3404 MB
Memory available to Photoshop: 7084 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=180, left=1920, bottom=1080, right=3520
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2112
glgpu[0].GLName="Intel(R) HD Graphics 4600"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="9.18.10.3204"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics 4600"
glgpu[0].GLRendererID=1046
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,i gd10iumd32"
glgpu[0].GLDriverDate="20130603000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 9.18.10.3204"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[80]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Hainan"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1124.2 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=2.56187e+010
clgpu[0].CLCompute=285.525
License Type: Subscription
Serial number: 90970762941485624948
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Sam\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 153,9G, 88,5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2
Plugin.dll Adobe Photoshop CC 2014 15.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
PSArt.dll Adobe Photoshop CC 2014 15.2
PSViews.dll Adobe Photoshop CC 2014 15.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2 (2014.2.0 x001)
Accented Edges 15.2
Adaptive Wide Angle 15.2
Angled Strokes 15.2
Average 15.2 (2014.2.0 x001)
Bas Relief 15.2
BMP 15.2
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.2
Charcoal 15.2
Chrome 15.2
Cineon 15.2 (2014.2.0 x001)
Clouds 15.2 (2014.2.0 x001)
Collada 15.2 (2014.2.0 x001)
Color Halftone 15.2
Colored Pencil 15.2
CompuServe GIF 15.2
Conté Crayon 15.2
Craquelure 15.2
Crop and Straighten Photos 15.2 (2014.2.0 x001)
Crop and Straighten Photos Filter 15.2
Crosshatch 15.2
Crystallize 15.2
Cutout 15.2
Dark Strokes 15.2
De-Interlace 15.2
Dicom 15.2
Difference Clouds 15.2 (2014.2.0 x001)
Diffuse Glow 15.2
Displace 15.2
Dry Brush 15.2
Eazel Acquire 15.2 (2014.2.0 x001)
Embed Watermark 4.0
Entropy 15.2 (2014.2.0 x001)
Export Color Lookup Tables NO VERSION
Extrude 15.2
FastCore Routines 15.2 (2014.2.0 x001)
Fibers 15.2
Film Grain 15.2
Filter Gallery 15.2
Flash 3D 15.2 (2014.2.0 x001)
Fresco 15.2
Glass 15.2
Glowing Edges 15.2
Google Earth 4 15.2 (2014.2.0 x001)
Grain 15.2
Graphic Pen 15.2
Halftone Pattern 15.2
HDRMergeUI 15.2
HSB/HSL 15.2
IFF Format 15.2
IGES 15.2 (2014.2.0 x001)
Ink Outlines 15.2
JPEG 2000 15.2
Kurtosis 15.2 (2014.2.0 x001)
Lens Blur 15.2
Lens Correction 15.2
Lens Flare 15.2
Liquify 15.2
Matlab Operation 15.2 (2014.2.0 x001)
Maximum 15.2 (2014.2.0 x001)
Mean 15.2 (2014.2.0 x001)
Measurement Core 15.2 (2014.2.0 x001)
Median 15.2 (2014.2.0 x001)
Mezzotint 15.2
Minimum 15.2 (2014.2.0 x001)
MMXCore Routines 15.2 (2014.2.0 x001)
Mosaic Tiles 15.2
Multiprocessor Support 15.2 (2014.2.0 x001)
Neon Glow 15.2
Note Paper 15.2
NTSC Colors 15.2 (2014.2.0 x001)
Ocean Ripple 15.2
OpenEXR 15.2
Paint Daubs 15.2
Palette Knife 15.2
Patchwork 15.2
Paths to Illustrator 15.2
PCX 15.2 (2014.2.0 x001)
Photocopy 15.2
Photoshop 3D Engine 15.2 (2014.2.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.2 (2014.2.0 x001)
Pinch 15.2
Pixar 15.2 (2014.2.0 x001)
Plaster 15.2
Plastic Wrap 15.2
PLY 15.2 (2014.2.0 x001)
PNG 15.2
Pointillize 15.2
Polar Coordinates 15.2
Portable Bit Map 15.2 (2014.2.0 x001)
Poster Edges 15.2
PRC 15.2 (2014.2.0 x001)
Radial Blur 15.2
Radiance 15.2 (2014.2.0 x001)
Range 15.2 (2014.2.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2
Ripple 15.2
Rough Pastels 15.2
Save for Web 15.2
ScriptingSupport 15.2
Shake Reduction 15.2
Shear 15.2
Skewness 15.2 (2014.2.0 x001)
Smart Blur 15.2
Smudge Stick 15.2
Solarize 15.2 (2014.2.0 x001)
Spatter 15.2
Spherize 15.2
Sponge 15.2
Sprayed Strokes 15.2
Stained Glass 15.2
Stamp 15.2
Standard Deviation 15.2 (2014.2.0 x001)
STL 15.2 (2014.2.0 x001)
Sumi-e 15.2
Summation 15.2 (2014.2.0 x001)
Targa 15.2
Texturizer 15.2
Tiles 15.2
Torn Edges 15.2
Twirl 15.2
U3D 15.2 (2014.2.0 x001)
Underpainting 15.2
Vanishing Point 15.2
Variance 15.2 (2014.2.0 x001)
Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
Water Paper 15.2
Watercolor 15.2
Wave 15.2
Wavefront|OBJ 15.2 (2014.2.0 x001)
WIA Support 15.2 (2014.2.0 x001)
Wind 15.2
Wireless Bitmap 15.2 (2014.2.0 x001)
ZigZag 15.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE -
Time Capsule: First backup over ethernet is very slow
My understanding is that a direct ethernet connection between my Imac and Time Capsule would make the initial backup process faster, but I did not notice any improvement whatsoever and the first backup is proceeding veeeeeeery slow. I was wondering if there was something I was missing when I connected by cable.
Thank you for your help!Felix,
The first backup I did was wirelessly and it was slow.
So, I erased the TC Hard Disk and hooked it up via ethernet.
It went much faster.
I was doing about 1.1 GB every 5 minutes using ethernet.
Joseph Kriz -
Hi,
I have a problem with my wife´s old iMac (24" mid-2007). Internet connection is way to slow. I´ve read through many forums to find a solution, but did not find anything.
Internet connection through wifi is at about 1kbit instead of the supposed 16kbit. All other Mac´s are fine within the same wireless network. Other user account works perfect. Ethernet connection works perfect. So I cleaned Safari´s Cache. Repaired rights. Rebooted. Checked Activity Monitor with no suspicious results. Deleted WLAN from networks pref pane. Deleted airport prefs, network.id prefs from Library, deleted internetconfigpriv and internetconfig prefs from user´s Library. Deleted wifi-keyword from keychain. Readded wifi connection. Still the problem persists.
Any other idea what to try? I´m not fond of reinstalling the complete machine …
Thanks, TillWell thanks for all the help, folks!
After all I reinstalled OSX from scrap and copied all the important stuff over from the backup. I did this twice as I figured out that installing Avira Antivirus would immediatly causing the Internet connection to die. No luck with uninstalling this software, I had to reinstall everything.
Good luck this AV-software runs on my other iMac (27" mid-2012) without hassle.
Speedy -
Network connection very slow, lot of drops
Hello!
On my network, there's an ADSL modem; an AirPort Extreme is connected to it and all my computers are connected to that AirPort Extreme.
Initially, I had set the AirPort Extreme as a bridge and the modem was in PPPoE. However, I had weird troubles with that setup (one computer couldn't reach another one, not even ping) so I made the other way around: the modem is now in bridge mode and the AirPort Extreme handles the PPPoE connection.
Since then (at least, I guess), downloading from the Internet or simply browsing is a nightmare. Connections would start at a varying low rate (always less than 30 KB/s, sometimes 5 KB/s) and always slow down until the connection drops completely. For small files, I can hope to download a 1 MB file in 40 minutes; for larger ones, it's hopeless.
I've tried to rule out the AirPort Extreme, connecting one computer directly to the modem. I reset the modem (since it's in bridge mode and it's beyond the subnet made from the AirPort Extreme, how can I reach it from my network?) and enter my ISP data. When all the lights on the modem are fine, it tells me some tests failed; I can't connect to the Internet that way. It looks like the modem lost its ability to connect as PPPoE when I defined it as a bridge (?).
I then tried to rule out the modem. I connected my computer and the ADSL line to the AirPort Extreme (which still had the PPPoE settings); the AirPort Extreme would not connect or reach a DNS (what's the purpose of having PPPoE settings if it can't connect to the Internet without even passing by a modem in bridge mode?).
In short, I can't rule out either the modem nor the AirPort Extreme, because they both can't connect to the Internet separately (the modem could before I inverted which device is in bridge mode). After all my attempts, the only way to get Internet back is to set the modem again as a bridge and use the AirPort Extreme for the PPPoE, which makes the whole problem of a very slow connection (even unusable) that I'm trying to repair. I'm lost at that point.
Any help would be really welcome!Bob Timmons wrote:
Two possibilities:
1) The modem is not working correctly and should be replaced
If that's the case, then I'm feeling guilty, as it worked before I set it as a bridge.
2) Your log in information has changed due to service provider updates. Contact your provider to verify your account details
It's actually my mother who created that account; I'll ask her further.
my native language isn't English
But, your English is excellent.
Thank you.
Some countries use PPPoA authentication, and not PPPoE. Although they are similar, if your provider really uses PPPoA credentials, then you cannot log on from your Mac or use the AirPort router to provide the log on authorization, since Apple does not support PPPoA.
Well, I tried using PPPoA recently and it wasn't better. Also, the fact that the AirPort is currently the one making the PPPoE authentication seems to definitively indicate it's not PPPoA (thanks to your information that it wouldn't work in that case).
Generally, my opinion would be that things will work better if you use the modem or a modem/router to provide the connection service and run the AirPort in Bridge Mode.....rather than trying to put the modem in Bridge Mode and use the AirPort to provide the connection service.
Yes, I agree. Actually, I had another problem with the previous setup (AirPort as bridge and modem for PPPoE) where, on my LAN with two computers, only one could reach the other one (the connection worked in one direction only); I couldn't even use file sharing, Remote Desktop or even ping (because, even trying from the working sense, the response would often not come back). In this Apple forum, I got the suggestion to exchange which device was in bridge mode and, indeed, now I can communicate from and to all computers. Since I've realised my connection to the Internet is now mostly broken, I should have been satisfied with the previous problem…
I'm hoping to go back to an Internet connection that works, and not get the first issue of computers not being reachable on the LAN. The big trouble here is that all these behaviours I've experienced are weird (am I outside of the logic with my use of the devices?). I'm also noticing that the first problem sounds to have arrived since I replaced my old router by the AirPort Extreme.
If your modem is 4-5 years old, then that might be another reason to consider replacing it. Ask your provider what they would recommend.
Wow, mine is actually way older than that! I don't think we've ever changed it since we had an Internet connection (around 1998). At this time, things were not designed to break too soon, right?
Perhaps it had to break with this duration of use, and it just waited that I change settings to break… Doesn't sound a likely scenario, however.
I'm considering trying with my neighbour's modem (with his connection's settings), with the AirPort in bridge mode. If it works, I'll be almost certain the problem is the modem, I'm right?
Thank you very much for your help so far; things are getting clearer! -
How to clear cookies, wireless internet connection very slow
My ethernet speed is very good, but my wireless speed is getting very slow. I wanted to clear my cookies, not sure how to do that and would that help?
Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
PHY Mode
Channel
Security
Signal/Noise or RSSI
Transmit (or Tx) Rate
Please do not post the BSSID, as that information is private.
Now hold down the option key again and select
▹ System Information... ▹ Network ▹ Wi-Fi
Compare the two-letter Country Code with the ISO code for your country. Does it match? The code X0 means that the country couldn't be determined. The code X3 means South America, not otherwise specified. -
Internet Connection very slow WRT160N v3
I had my an IT person install a brand new WRT160N router. I also installed a new HP wireless printer/scanner/fax/printer. I am now noticing that the internet connection is very slow. Taking about 4 minutes to download any link or site I visit. I have talked to charter today and they are telling me my signal strength is great - I have highest speed they offer (20). What am I not doing right? Do i need to check this router or a connection? - Allison
Physical connection should be like from modem to the router on internet port and from computer to the routrer on ethernet port 1.
Try to readjust the wireless settings on your router....
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
IMac connection very slow via airport
I hope some of you on the forum can help me as I'm rather puzzled. My internet has always been running at a good speed ,20mbs real time 12-17mbs. Before christmas I experienced a dip in the speed. I thought it was the ISP and contacted them. It turn out that there was a fault in the area. That should naw have been fixed and running speed tests on my macbook pro's proved that correct. I'm now getting the full 20mbs. How ever the iMac is painstakingly slow on the network and when going on the internet. speedtest.net gives me a >1mbs on downloads and > .5mbs. My 17" macbook pro which is placed next to the iMac in the office upstairs is running full tilt 20mbs download and <2mbs upload. This is very frustrating as I can't understand why the difference can be so big. I've restarted router, modem, iMac. Reinstall of Snow Leopard (Clean) repaired permissions, HDD. Have i got something wrong with the airport, spyware/virus (don't see that being the case) If any one of you guys/girls has any idea's solution please let me know.
TomI think I'm having a similar problem. I have a late 2006 24-iMac C2D 2.4 and it is has very slow internet access. I understand that there is so many variables but I have another iMac (same model) and a late 2009 Macbook Pro and they have no problems. I've had the internet connection tested and it is working fine.
I can't figure out what the problem is.
Likewise, I've done the same things: reset airport, modem, moved computer, and reinstalled OSX.
I have no antivirus software.
Message was edited by: Pbtaco
Message was edited by: Pbtaco -
Very Slow FiOS Internet In Bradeonton, FL
Very slow here in Bradenton for the last several weeks. Supposed to be seeing 50/25 but only getting 5/5. This seems to happen every 6-8 months. Did a Verizon Speed Test for the South region and am only seeing 15/8. Last couple of times this happened, it was due to a problem at the main station - equipment related. So frustrating.
I am sorry to hear about the speed slow downs. There can be many things effecting the speed. Are you running these tests from a wired or wireless connection? Please also post what steps you have tried with your equipment to try to fix this so we do not waste your time.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
Since I have installed iOS7 on my iPhone 4s - 16G, my 4s connects very slowly to my home Wi-Fi network. Sometimes it even doesn't connects at all. Which result in a higher mobile data usage (and thus higher bill at the end of the month).
Can this error be solved in iOS 7.0.4?Hi masterwil,
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy -
Lumia 920 Facebook connection very slow over WiFi ...
Since the Portico update the connection to Facebook both in the People and Me hub as well as in the Facebook app is very slow over WiFi, whilst still good over 4G/LTE (with WiFi off). The connection to the Nokia account also appears to have a similar problem. All other accounts and apps have good speed over both cellular and WiFi connections.
Any ideas anybody?
PS: FYI, a bit more info about the history and context: When I noticed the problem the first time after the update, I tried to solve it by deleting and re-adding my Facebook account on the phone. Unfortunately, that made me lose my Me hub tile, so I decided to do a full reset. That again unfortunately got stuck on the togg wheels, so I restored the phone using Nokia Care Suite with the latest firmware, and restored my accounts, apps and settings from scratch. Everythings seems to work fine now, except the above mentioned Facebook and Nokia account connectivity problem.Did you somehow solve this problem?
I have the same issue here with my Lumia 920.
However I have already found out that it only applies to my home Wifi. All other Wifi networks i was connecting to did work flawlesly.
I need to note that all other devices on my home network are using facebook without a glitch. Only Lumia has some problems with it.
Maybe you are looking for
-
Where is the optimize video for iMovie 10??
Hi, I have HV20 HDV camcorder with bunch of older tapes. I had iMovie (8 or 9) before where I used to get specific options for importing the tapes. For example, I could choose save location, add to or create new event, split days into new events, an
-
Help! BAPI_ACC_INVOICE_RECEIPT_POST problem
How to post 'FV60' using BAPI_ACC_INVOICE_RECEIPT_POST, and how many tansactions supported? Thanks
-
Document Viewer for Nokia 5530 XPressMusic
Hi everyone! I bought myself the nokia 5530 last week, and today I tried to open a pdf file, and the phone couldn't open it. I thought it had a document viewer and I checked it again on the Nokia site for it's specifications. There it was under specs
-
Saving eps. format for older version of Quark 6
I can't remember how to save an photoshop eps. with a transparant backgound so can place into an older version of Quark. Every setting I use still gives me a white background.
-
Hi All, can any one explain regarding SD FLOW AND MM FLOW clrearly.. urgent. rgdsm