Ethernet Connects/Wireless Does Not
Hello-
I am setting up a DSL connection through SBC. They have provided me with a 2Wire wireless modem (Model #2701). I am able to connect through my ethernet cord just fine, but the wireless will not connect. Actually, to be more exact, I can connect through the wireless, but the web pages time out when I open up Safari (airport shows the network and accepts my password).
I have gone through 2Wire's website and SBC's as well, but have found nothing that helps fix the situation. Same goes with this discussion forum...
Anyone have any idea of what I can do to get a wireless connection that does not time out?
Thanks in advance.
Message was edited by: Michael M.
The numbers are only relevent to wireless. Your cabled connection will work, whether you put numbers in or not.
You say:"+yes I am sure that it is not the problem because it is accepting it and not giving me any errors+"
Which "it" is accepting "it"?
If your wireless card in mac isn't turned on, I think you could enter ANY numbers, and still get no errors.
Have you enabled your airport ? (MenuBar, upper right, I think)
Can you see anyone else's wireless network name? Ever connected before over wirelss? (hope I didn't miss that six or seven msgs ago)
Yep, you said you're seeing the network name. Can you connect to 2Wire using ethernet cable, turn OFF encryption, then try wireless again?
Message was edited by: Rick Van Vliet
Similar Messages
-
Ethernet works, wireless does not. Internet connection issues.
This is my very first post, I hope it will be helpful and save people the grief that I went through.
Yesterday, on Wednesday, for some reason my MacBook "AirPort" would show full bars at the top of the screen but when I opened Safari or iTunes, I had no connection. What's weird is that I had never changed the settings since getting my laptop a year ago and they were locked as well.
I connected through Ethernet cable directly into my WRT54G linksys router and the connection was good. What was strange is that my wife's MacBook had no problems connecting wirelessly.
I tried everything I could think of. Rebooting my computer. Restarting the router and cable modem. Tinkering with the TCP/IP numbers. I updated my OS from 10.6.4 to 10.6.5 and updated Safari and iTunes. Nothing worked.
My wife and I went through every single post on the Apple forum discussions site. We tried some interesting things. Putting a $ character before the password. Changing the DNS server numbers. Doing stuff in the unix console. Changing the time on my computer. Nothing worked.
I booted from the Applications disc that my MacBook came with and did the Hardware Diagnostic Test. No hardware issues, thank goodness.
We tried everything we could think of. Finally, I gave in and called the Apple store closest to me, they transferred me over to Apple Support and I spent 2 hours on hold. I got fed up and called, while still on hold with my phone, with my wife's phone. I got a recorded message, "Sorry our offices are closed." That was quite frustrating to hear.
So I got online through my Ethernet connection and booked an appointment at the Apple store to see a Apple Genius. Went to bed hoping that the next day, I could boot my MacBook and wirelessly connect miraculously.
The next day (today), I gave the wireless connection a try. Same problem. Full bars, no connection.
Off to the Apple store.
At the Apple store, my Genius guy connected my MacBook to their store internet wirelessly and then tested the connection. It worked. Then he ran Disk Utility to verify/repair disk permissions.
Apparently, he says he runs Disk Utility once a week to fix disk permission problems on his own computers. Why would I have disk permission problems when I'm the only user on my own computer? He states that when separate programs are run, they all access user permissions and some programs that are buggy alter these permissions or files when they're not suppose to.
Apparently, according to Disk Utility, that's what happened and my permissions thing could not be repaired.
* * * The **ONLY SOLUTION** was a re-installation of system software. * * *
So, I brought my laptop home and did a re-installation. Reboot your laptop with the boot disc the computer came with, by holding down the "C" key after you turn it on. For some reason it took a few minutes just to boot from the boot disk, it felt like I was holding down the "C" key forever. The re-insall took about 50 minutes.
The problem was FIXED.
The only thing that I appear to have lost are the desktop pictures that I downloaded and put in the Library -> Desktop Pictures folder. Everything else appears normal so far.
I'll be running Disk Utility more often from now on. Apple Genius guy says that Disk Utility should be run after booting from the boot disc because it will be more thorough than running it when booting off your laptop.So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess. -
Passport Wireless Does not connect
Ever since I downloaded and installed the newest OS version for the Passport(10.3.0.1418) I can't connect my phone via wireless. The phone shows the wireless spot but just doesn't want to connect. Is there a bug in the OS version i am using? If so then how can I get any OS update/fixes if the wireless does not work?
if you renamed your MyPassport to be something else (for example) mypassport555, then you need to enter: mypassport555.localThat was the most helpful thing I read today, so I'd to register to reply and thank you.Thanks for that, pal. Really appreciate it.
-
When I wake my iMac from sleep, the wireless does not connect. I have to shut shutdown and then restart and then it connects. I am running Lion 10.7.3 Any thoughts?
Been waiting along time for this problem to be fixed. Unfortunately the update hasn't help at all and even made the situation worse. Now my airplay connection from iMac to stereo abruptly stops after about 10-15 min. so I have to go over and quit wifi, start it up and find my airport network. Not sure why it always has a problem with the apple airport network. My neighbor's pc network is always there.
-
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
Error: : connection pool does not exist
I am getting a Connection pool does not exitst Error on starting Web
Logic. When i Checked on http://localhost:8002/console ->
jdbc-connectionpools
Productionpool(name of the connection pool), I checked the testing tab
it shows it is unavailable while it shows Deployed=true on the
Configuraton tab.
It is failing on my system while its working on other systems. I am
using weblogicSP4_814
Can u pls provide me some solution for this error.
<Jun 16, 2006 4:33:11 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:12 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:13 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "notifJMSJDBCConnPool" deployment failed with
the following error: 0:Could not create pool connection. The DBMS
driver exception was: access denied (java.util.Proper
tyPermission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:13 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:14 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "productionPool" deployment failed with the f
ollowing error: 0:Could not create pool connection. The DBMS driver
exception was: access denied (java.util.PropertyPerm
ission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"notifJMSJDBCConnPool" deployment failed with the
following error: DataSource(weblogic.jdbc.jts.notifJMSJDBCConnPool)
can't be created with non-existent Pool (connection
or multi) (notifJMSJDBCConnPool).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"productionPool" deployment failed with the follo
wing error: DataSource(weblogic.jdbc.jts.productionPool) can't be
created with non-existent Pool (connection or multi) (
productionPool).>
<Jun 16, 2006 4:33:15 PM IST> <Alert> <JMS> <BEA-040052> <JMSServer
"NotificationJMSServer" store failed to open java.io
.IOException: JMS JDBC store, connection pool = <notifJMSJDBCConnPool>,
prefix = <notif>: connection pool does not exist
java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection pool does no
t exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentÂTarget.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymenÂtTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(ÂDeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeployÂmentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3Â9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpÂl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpÂl.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:Â734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeÂanImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeÂanServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerÂImpl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.javÂa:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerÂMBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlavÂeDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33Â9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeplÂoymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
<Jun 16, 2006 4:33:15 PM IST> <Error> <JMS> <BEA-040123> <Failed to
start JMS Server "NotificationJMSServer" due to webl
ogic.jms.common.JMSException: JMS can not open store notifJMSJDBCStore.
weblogic.jms.common.JMSException: JMS can not open store
notifJMSJDBCStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentÂTarget.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymenÂtTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(ÂDeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeployÂmentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3Â9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpÂl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpÂl.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:Â734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeÂanImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeÂanServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerÂImpl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.javÂa:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerÂMBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlavÂeDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33Â9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeplÂoymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection p
ool does not exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
<Jun 16, 2006 4:33:32 PM IST> <Warning> <HTTP> <BEA-101248>
<[D:\Build\autodeploys\i2\weblogic_home\config\vendavo\.\app
lications\.wlnotdelete\wlap12518\vendavo.war]: Deployment descriptor
"web.xml" is malformed. Check against the DTD: org.
xml.sax.SAXParseException: The content of element type "web-app" must
match "(icon?,display-name?,description?,distribut
able?,context-param*,filter*,filter-mapping*,listener*,servlet*,servlet-mapÂping*,session-config?,mime-mapping*,welcome-f
ile-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-consÂtraint*,login-config?,security-role*,env-entr
y*,ejb-ref*,ejb-local-ref*)". (line 252, column 11).>
java.lang.ExceptionInInitializerError
at com.vendavo.cl.ClassHelper.<clinit>(ClassHelper.java:28)
at
com.vendavo.cl.io.ResourceHelper.addLoader(ResourceHelper.java:121)
at
com.vendavo.cl.io.ResourceHelper.<init>(ResourceHelper.java:39)
at
com.vendavo.cl.io.ResourceHelper.<clinit>(ResourceHelper.java:29)
at
com.vendavo.platform.action.StartupAction.init(StartupAction.java:75)
at
com.vendavo.platform.action.StartupAction.contextInitialized(StartupAction.Âjava:311)
at
weblogic.servlet.internal.WebAppServletContext$FireContextListenerAction.ruÂn(WebAppServletContext.java:7044)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubjeÂct.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.notifyCreated(WebAppServletCÂontext.java:1753)
at
weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServlÂetContext.java:3352)
at
weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:727)
at
weblogic.servlet.internal.WebService.preloadResources(WebService.java:486)
at
weblogic.servlet.internal.ServletInitService.resume(ServletInitService.javaÂ:30)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.security.AccessControlException: access denied
(java.util.PropertyPermission * read,write)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.javÂa:269)
at
java.security.AccessController.checkPermission(AccessController.java:401)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at
java.lang.SecurityManager.checkPropertiesAccess(SecurityManager.java:1243)
at java.lang.System.getProperties(System.java:501)
at
com.vendavo.cl.property.AppProperties.loadSystemProperties(AppProperties.jaÂva:411)
at
com.vendavo.cl.property.AppProperties.loadBasics(AppProperties.java:326)
at
com.vendavo.cl.property.AppProperties.getInstance(AppProperties.java:160)
at com.vendavo.cl.log.VLog.loadAppProperties(VLog.java:134)
at com.vendavo.cl.log.VLog.createDefaultSetup(VLog.java:94)
at com.vendavo.cl.log.VLog.<clinit>(VLog.java:66)
... 18 more
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Error> <HTTP> <BEA-101216> <Servlet:
"AdminServlet" failed to preload on startup in Web a
pplication: "soap".
Thanks in Advance,
Ketan.B.Parekhketan parekh wrote:
I am getting a Connection pool does not exitst Error on starting Web
Logic. When i Checked on http://localhost:8002/console ->
jdbc-connectionpools
Productionpool(name of the connection pool), I checked the testing tab
it shows it is unavailable while it shows Deployed=true on the
Configuraton tab.
It is failing on my system while its working on other systems. I am
using weblogicSP4_814
Can u pls provide me some solution for this error. Hi. Would you run the utils.dbping utility, and then
give it the arguments to connect to the same DBMS with
the same user as your pool? Show me the exception you
get if it fails:
C:\bea81sp5\weblogic81>java utils.dbping
Usage: java utils.dbping DB2B [-d dynamicSections] USER PASS HOST:PORT/DBNAME
or java utils.dbping JCONN2 USER PASS HOST:PORT/DBNAME
or java utils.dbping JCONNECT USER PASS HOST:PORT/DBNAME
or java utils.dbping INFORMIXB USER PASS HOST:PORT/DBNAME/INFORMIXSERVER
or java utils.dbping MSSQLSERVER4 USER PASS HOST:PORT/DBNAME
or java utils.dbping MSSQLSERVER4 USER PASS [DBNAME@]HOST[:PORT]
or java utils.dbping MSSQLSERVERB USER PASS HOST:PORT/DBNAME
or java utils.dbping ORACLE USER PASS DBNAME
or java utils.dbping ORACLEB USER PASS HOST:PORT/DBNAME
or java utils.dbping ORACLE_THIN USER PASS HOST:PORT:DBNAME
or java utils.dbping POINTBASE USER PASS HOST[:PORT]/DBNAME
or java utils.dbping SYBASEB USER PASS HOST:PORT/DBNAME
>
>
<Jun 16, 2006 4:33:11 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:12 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:13 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "notifJMSJDBCConnPool" deployment failed with
the following error: 0:Could not create pool connection. The DBMS
driver exception was: access denied (java.util.Proper
tyPermission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:13 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:14 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "productionPool" deployment failed with the f
ollowing error: 0:Could not create pool connection. The DBMS driver
exception was: access denied (java.util.PropertyPerm
ission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"notifJMSJDBCConnPool" deployment failed with the
following error: DataSource(weblogic.jdbc.jts.notifJMSJDBCConnPool)
can't be created with non-existent Pool (connection
or multi) (notifJMSJDBCConnPool).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"productionPool" deployment failed with the follo
wing error: DataSource(weblogic.jdbc.jts.productionPool) can't be
created with non-existent Pool (connection or multi) (
productionPool).>
<Jun 16, 2006 4:33:15 PM IST> <Alert> <JMS> <BEA-040052> <JMSServer
"NotificationJMSServer" store failed to open java.io
.IOException: JMS JDBC store, connection pool = <notifJMSJDBCConnPool>,
prefix = <notif>: connection pool does not exist
java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection pool does no
t exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment??Target.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen??tTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(??DeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy??mentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3??9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp??l.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp??l.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:??734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe??anImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBe??anServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServer??Impl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.jav??a:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(Server??MBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(Slav??eDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33??9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(Depl??oymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
<Jun 16, 2006 4:33:15 PM IST> <Error> <JMS> <BEA-040123> <Failed to
start JMS Server "NotificationJMSServer" due to webl
ogic.jms.common.JMSException: JMS can not open store notifJMSJDBCStore.
weblogic.jms.common.JMSException: JMS can not open store
notifJMSJDBCStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment??Target.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen??tTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(??DeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy??mentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3??9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp??l.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp??l.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:??734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe??anImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBe??anServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServer??Impl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.jav??a:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(Server??MBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(Slav??eDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33??9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(Depl??oymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection p
ool does not exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
<Jun 16, 2006 4:33:32 PM IST> <Warning> <HTTP> <BEA-101248>
<[D:\Build\autodeploys\i2\weblogic_home\config\vendavo\.\app
lications\.wlnotdelete\wlap12518\vendavo.war]: Deployment descriptor
"web.xml" is malformed. Check against the DTD: org.
xml.sax.SAXParseException: The content of element type "web-app" must
match "(icon?,display-name?,description?,distribut
able?,context-param*,filter*,filter-mapping*,listener*,servlet*,servlet-map??ping*,session-config?,mime-mapping*,welcome-f
ile-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-cons??traint*,login-config?,security-role*,env-entr
y*,ejb-ref*,ejb-local-ref*)". (line 252, column 11).>
java.lang.ExceptionInInitializerError
at com.vendavo.cl.ClassHelper.<clinit>(ClassHelper.java:28)
at
com.vendavo.cl.io.ResourceHelper.addLoader(ResourceHelper.java:121)
at
com.vendavo.cl.io.ResourceHelper.<init>(ResourceHelper.java:39)
at
com.vendavo.cl.io.ResourceHelper.<clinit>(ResourceHelper.java:29)
at
com.vendavo.platform.action.StartupAction.init(StartupAction.java:75)
at
com.vendavo.platform.action.StartupAction.contextInitialized(StartupAction.??java:311)
at
weblogic.servlet.internal.WebAppServletContext$FireContextListenerAction.ru??n(WebAppServletContext.java:7044)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje??ct.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.notifyCreated(WebAppServletC??ontext.java:1753)
at
weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServl??etContext.java:3352)
at
weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:727)
at
weblogic.servlet.internal.WebService.preloadResources(WebService.java:486)
at
weblogic.servlet.internal.ServletInitService.resume(ServletInitService.java??:30)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.security.AccessControlException: access denied
(java.util.PropertyPermission * read,write)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.jav??a:269)
at
java.security.AccessController.checkPermission(AccessController.java:401)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at
java.lang.SecurityManager.checkPropertiesAccess(SecurityManager.java:1243)
at java.lang.System.getProperties(System.java:501)
at
com.vendavo.cl.property.AppProperties.loadSystemProperties(AppProperties.ja??va:411)
at
com.vendavo.cl.property.AppProperties.loadBasics(AppProperties.java:326)
at
com.vendavo.cl.property.AppProperties.getInstance(AppProperties.java:160)
at com.vendavo.cl.log.VLog.loadAppProperties(VLog.java:134)
at com.vendavo.cl.log.VLog.createDefaultSetup(VLog.java:94)
at com.vendavo.cl.log.VLog.<clinit>(VLog.java:66)
... 18 more
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Error> <HTTP> <BEA-101216> <Servlet:
"AdminServlet" failed to preload on startup in Web a
pplication: "soap".
Thanks in Advance,
Ketan.B.Parekh -
The connection pool does not exist?
Can somebody tell what is happening? For some reason the Sun Java Application Server 8 seems to think that there is no connection pool. For a moment everything worked. I did not change the configuration but now I get this message (if I open the admin console and ping the Connection Pool its there). Here is a part of the server.log file:
[#|2006-05-06T19:12:54.453+0300|WARNING|sun-appserver-pe8.1_02|javax.enterprise|_ThreadID=10;|UTIL5047: Connection Pool does not exist: [DB2 yhteysConnectionPool]|#]
[#|2006-05-06T19:12:54.453+0300|WARNING|sun-appserver-pe8.1_02|javax.enterprise|_ThreadID=10;|UTIL5048: Error Loading Jdbc Resource: [jdbc/aarre]|#]
[#|2006-05-06T19:12:54.453+0300|INFO|sun-appserver-pe8.1_02|javax.enterprise|_ThreadID=10;|Error loading Jdbc Resource:jdbc/aarre. skipping...|#]
[#|2006-05-06T19:12:55.031+0300|WARNING|sun-appserver-pe8.1_02|javax.enterprise.system.core|_ThreadID=10;|Exception occurred while satisfying optional package dependencies : {0}
java.lang.NullPointerException
at com.sun.enterprise.deployment.backend.OptionalPkgDependency.satisfyOptionalPackageDependencies(OptionalPkgDependency.java:183)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:270)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:591)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:237)
at com.sun.enterprise.server.PEMain.run(PEMain.java:284)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]Hi,
I'm experiencing the same problem.
Did you solve the problem and if yes how ?
Thanks,
EDH -
Connection Server does not start
Hello guys,
The Connection Server does not start anymore.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
It's a BOE XI 3.1 SP2 with IK 3.1 SP2 installed on a Windows 2003 Server.
BO XI database is on a SQL Server and all tables are there and seems to be OK
The log file for the connectserver via trace is below :
2010/01/28 19:06:43.339|>>| | | 4524|4528| |||||||||||||||TraceLog::Admin: logdir ('C:/Program Files/Business Objects/BusinessObjects Enterprise 12.0/Logging/')
2010/01/28 19:06:43.339|>>| | | 4524|4528| |||||||||||||||TraceLog::Admin: update ()
2010/01/28 19:06:43.339|==| | | 4524|4528| |||||||||||||||TraceBridge::Initialize: pullable set to 1
2010/01/28 19:06:43.339|==| | | 4524|4528| |||||||||||||||TraceLog state:
// device_info
// process (process#pid) = ConnectionServer#4524
// device (name#deviceid) = ConnectionServer#MainDevice
// pull/push (pullable) = Pull
// pull mode settings
// configfile (ini) = C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Logging\logConfig\BO_trace.ini
// every ... s (period) = 60
// config
active = true;
severity = 'W';
importance = '<<';
keep = true;
always_close = false;
log_dir = "C:/Program Files/Business Objects/BusinessObjects Enterprise 12.0/Logging/";
2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an error Unknown.:
2010/01/28 19:06:43.402|==| | | 4524|4544| |||||||||||||||SIServiceStopThread::run: SIServiceStopThread::run exited
2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||CsContainer::uninitialize
2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||TransientObjectMonitor stopMonitor()...
.\siserver.cpp:974: TraceLog message 11
2010/01/28 19:06:43.402|>>|A| | 4524|4528| |||||||||||||||assert failure: (.\siserver.cpp:974). (false : SIServerController::run: Unknown exception caught in server's uninitialization function).
Any help please?!
thank you very much.
CesarHello,
I have the same problem (Connection Server does not start).
I'am under BOXI R2 SP6 (unix) and i have this error in my log when i want to start ConnectionServer :
Timestamp ProcessID ThreadID Message
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=3 cat=1 msg=35100 p=ConnectionServer started
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: SIServerController::run: Before initialize
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:416): trace message: SUNIXDaemon::init: starting
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: SUNIXDaemon::init: redirecting stdio to /dev/null
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:209): trace message: installing fg terminiation handler
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:220): trace message: installing abnormal sys handler
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:506): trace message: SUNIXDaemon::init: finished
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=0 cat=14 msg=35101 p=The root server reported an error Unknown.
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an error Un
known.:
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: CsContainer::uninitialize
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: TransientObjectMonitor stopMonitor()...
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=0 cat=14 msg=35101 p=The root server reported an error Internal Error. (Reason: Unknown exception caught in ser
ver).
[Fri May 7 07:37:09 2010] 31154 1103673168 assert failure: (siserver.cpp:953). (false : SIServerController::run: Unknown exception caught in server's uninitializatio
n function
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=3 cat=1 msg=35100 p=ConnectionServer stopped
Any idea ?
Thanks. -
my wifi is not connected on my iphone and when i try to connect it does not recognise my password
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
The Connection Server does not start after an upgrade to BO4.1 SP3
Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
GerdHi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting. -
Tecra A3 - Creative Mouse Wireless does not work
My Creative Mouse Wireless does not work while touchpad is installed.
Even if I disable the Touchpad, the mouse seal does not work.
Does anyone know how to solve this problem?
Thank you,
R.P.Hello
On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
As far as I know functionality of external mouse doesn`t depend on touchpad settings.
Bye -
HP Officejet 6000 Wireless - Does not print black correctly.
HP Officejet 6000 Wireless - Does not print black correctly.
Previously the printer was printing fine.
This evening I printed a diagram I made in MS PowerPoint. The diagram contained black and red text along with black, red, and blue lines. When I took the printed page from the printer, all the black items looked faded. Instead of black, they printed as a light, faded gray. The red and blue printed correctly.
Another user of the printer printed some documents around the same time. These documents had nothing but black text. Every page this user printed showed up completely blank. The black was not even faded. There were no signs of anything being printed on the pages at all.
It seemed strange that one print job would print faded black and the other printed nothing. Considering the possibility that the ink was low, a new black cartridge was placed into the printer. The exact same results occured. My diagram printed correctly except for the fact that the things that were supposed to be black were coming up as light gray. Once again, the documents printed by the other user came up completely blank.
I ran a print test on the printer. It printed a Windows logo with the word "Windows" below. The logo printed correctly. The text showed up as a light, faded gray.
A third user printed an Excel spreadsheet. The cell borders were printed as a light gray. Nothing else printed. Everything in the spreadsheet was supposed to be black.
The third user also printed a recipe from MS Word. Most of the text showed up as a light, faded gray. Some text did not show up at all. I could not see any correlation between what showed up in faded gray and what did not show up.
It seems to me that if something was wrong with the cartridges, it would either always be faded or not print at all. I can consistently get some things to print faded and other things to not print at all. Color always prints correctly.
The print jobs were sent to the printer wirelessly from three different computers. Two computers run Windows 7 (x64). The third computer runs Windows XP SP2.
As far as I can tell, nothing was changed or done differently between now and the last time something printed correctly.
Might this be a driver issue? Since the printing consistently prints one way for certain files and another way for other files, I don't see it as being caused by hardware. If it's not a software issue, what could possibly cause the effects I described above?This article should help resolve your partial/blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Query on SQL Developer Connections Tree Does Not Display Objects
Hi Gurus, Could you please clarify on the below. As per the note ID 1458753.1, SQL Developer Connections Tree Does Not Display Objects to user in order to access database objects outside the owned schema/account. ------------------------- By default, and without granting wide privileges such as DBA, a user will only see his or her own objects in the first level object nodes under their connection. Objects in other schemas must be accessed via the Other Users node under the connection. This is the intended functionality/display in SQL Developer. ------------------------- Is there any other way we can achieve this? Requirement is very common - user A owns all objects and user B granted read/read-write privileges on user A objects. Now user B wants to Display user A objects in the corresponding objects node of SQL developer. Could any one shed some light here? Thanks Venu
First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin -
IPhone 4s bluetooth connects but does not work handsfree
My iPhone 4s bluetooth connects but does not work handsfree. Has worked fine with My iPhone 3s. The Light on my VW turns green indicating a connect, but the phone does not work through the VWs audio.
Fixed by power cycling the iPhone
Maybe you are looking for
-
Error while executing a web template in browser
Hi experts, I am facing an issue when I am creating copy of an existing web template and executing it. As per the query inserted in the web template, it should show the 'variable entry' screen, but its showing a page with lots of junk characters (loo
-
Repetitive Image Defects Appear on the Printed Page
Hi there I am having trouble with my HP LaserJet 6P Repetitive Image Defects Appears on the Printed Page. Can anyone help me with this. Please. This question was solved. View Solution.
-
While trying to update my phone one photo is stopping the whole process and I've gone through all the online suggestions (check for updates,etc)
-
I copied several movies into iTunes 8 but I am unable to set them to a Movie genre. I have set them as movies under the 'options' tab and there is a 'video' tab available but when I attempt to change the Genre it only gives me Music Genres instead of
-
Resultset, preparedstatement question. what is first..
Hello. My English ability is very poor. sorry Usually I did... Rs.close(); pstmt.close(); con.close(); but pstmt.close(); rs.close(); con.close(); is it possible.... have no error but I want know. If resultset is alive, preparedstatement can close? Q