Ethernet Controller is not working on Satellite L645D-S4030

Basically i got my windows 7 reinstalled on to my laptop because of viruses......Now I have a issue with the Ethernet controller not working, I checked my device manager and there's some kind of yellow dash across the icon......Anyone know what the problem is and how i can fix this problem ????
BTW i have a SATELLITE L645D-S4030

Hi buddy,
Hmm Usually if you reinstall Windows from Toshiba recovery disk all drivers will be installed too because the disk contains an image of factory settings.
Or have you used another disk?
Yellow exclamation mark could mean there is a driver issue so it would be recommendable reinstalling the LAN driver. Follow the link posted Timox. After installing the driver restart your computer and check device manager again. Normally the yellow exclamation mark should be vanished.

Similar Messages

Toshiba Media Controller is not working on Satellite P850-12Z and Win7

Hi
I have a problem with the program Media Controller, not get it to work at all, I have a Sony Bravia with wifi, try to share music and video and always says "remote media library did not allow the connection".
How I can fix it, also say that when you try to play a file in the context menu "Play on" attempts to connect to the server but never connects.

+To stream your media, you need the following hardware and software:+
A wired or wireless private network.
Your PC needs to be connected via a broadband router.
Your devices must be on the same subnet as your computer.
The network location must be set to Home network.
Either another computer on your network or a device known as a Digital Media Renderer (DMR) must be present. DMR are hardware devices connected to your wired or wireless network that you can control using your computer.
+To open Media Controller to allow enabling / disabling (not recommended):+
1. Click the Start menu.
2. Enter "Controller" into the search field.
3. Click "Media Controller" in the search results.
4. TOSHIBA Media Controller will open allowing you to setup sharing options.
5. Follow the on-screen prompts to set up file sharing.
6. For more information about setting up devices on your network, refer to the online help for Microsoft Windows 7 Operating System:
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extender
*More info:*
http://aps2.toshiba-tro.de/kb0/FAQ2503AX0000R01.htm

Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?

Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?

i would try an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
if it still gives that message, you need to take it to apple store or apple service provider to have a new card installed. the apple site gives listings of providers and stores in your area:
https://locate.apple.com

Controller is not working custom Region

Hi ,
I am working on customization of OA pages ,IMCAccountOverviewEditPG, on Oracle customer online.The requirement is to add a new advance table region on at the bottom of this page. The application is on 11.5.10 2CU .
So here is test that i tried
CUSTOM REGION:
1) I have created a indepedent test region EQXAccountContactRN of type MessageCOmponenetLayout. Under that i have created Mesage layout. Under this region i have created a message text input and a submit button.
I have attached a controller EQXAccountContactRNCO with EQXAccountContactRN which is just Helloworld program.
Using XML import i have imported this test region. Import works fine.
/oracle/apps/imc/customer/account/createupdate/webui/
I have also copied the controller in the EQXAccountContactRNCO.class in the above server webui folder
ATTACHING THE CUSTOM REGION USING PERSONALIZATION:
2) Using personalization on IMCAccountOverviewEditPG page, i have created an item of "Flexible Layout" type.
2)I have added "Flexible content" region unde the Flexible Layout using personalization which extend EQXAccountContactRN created in step one.
3) I have bounced the apache and looked into the IMCAccountOverviewEditPG page, I can see my Custom SO FAR SO GOOD.
4) But The controlller EQXAccountContactRNCO ,associated with the EQXAccountContactRN custom page is not working. I have put a test code both in the processRequest() and PrcessFormRequest both are not working.
A) Can you please tell me why the custom controller is not working ?
B) Also the flexible content region do not shows the custom controller , all it show is following controller.
oracle.apps.fnd.framework.webui.OAFlexibleLayoutCO 115.12
oracle.apps.fnd.framework.webui.OAFlexibleContentCO 115.12

Also if some one knows a better appoach to modify a exisitng page, please comment here.

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

PS4 controller mic not working

Hi
I've had my PS4 since day 1 release and same controller until just few days ago when i noticed rubber was coming off bad from the thumbsticks and the audio jack the sound wasn't working as normal, it was coming out the headset very low and at like a different pitch or tinny/distorted (if that makes sense) and people could no longer hear me and they said there was an echo or something. So I bought a new controller (black) and I can hear sound (gameplay and people talking in game chat and party chat) but it doesn't pick up my voice no one can hear me, went back to the shop and had the remote replaced and the same thing with the new replacement (black), funny thing is though, my sisters remote from her white PS4 works with my console and the headset mic works perfectly, sound comes in and it recognises my voice and people can hear me, I can press L2 on the main and use my voice to start the game or whatever. I tried deleting and repairing the controllers, i tried pressing the reset button on the back of controllers, checked that its pushed in all the way, half way, tried turning it, nothing worked.I contacted sony support and they can't help me cos its third party devices being used with the controller.
What i usually used was beats solo 2 headset or iphone earphones.
Am I getting faulty controllers?
BEFORE saying my mic is the problem, why is my headset working on my sisters white controller but not working on the 2 new black controllers? Thanks.

I think we need to start a list of complete let down threads. I thought this was some type of support group.

Ethernet driver for WXP is not working on Satellite A100

Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

Hi
I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
If you want you can download and install the Lan driver from the Intel page:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
There you will find the drivers for the Intel 8256x Ethernet Controllers
Bye

Network controller is not recognized on Satellite A100 under Windows XP

Hi all!
I have purchased a Satellite A100 PSAAR and I have performed a clean install of Windows XP on it. I have installed all the drivers in the correct order(downloaded them from the support page) but I still have one problem:
In the device manager the ethernet controller and the network controller show up with a yellow exclamation mark and they are not recognized. I downloaded the lan driver and I got it to recognize the ethernet controller. However no matter how hard I tried, I cannot find the suitable driver for the NETWORK CONTROLLER which still shows up in the device manager in yellow color.
I could really use any help here...Thank you in advance.

Please note that Wireless Lan card is placed under the Network adapters too!!!
If you have installed the LAN (Ethernet) driver and the card was installed you should also check if a WLan card driver is needed!!!!
By the way:
If the LAN card was not recognized try this Intel Lan driver:
Intel 8256x Ethernet Controllers
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
Good luck

Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it.

Wireless conection do not work in Satellite R630-13U Code : PT31LE-00V006

Hi all
I have bought a new Satellite R630-13U Code : PT31LE-00V006CE two weeks ago. Problem is that I am not able to get connected to any Wireless network (neither open or encripted with WPA nor WEP).
In my laptop I got it with Windows 7 installed. I am able to see the wireless network icon next to the clock down right corner of the screen, also I am able to select one of the netwoks that the pc detects and show in the list. Then once I select the network it asks me for the password, and if I introduce a wrong password, I get the right error message.
Problem comes when I introduce the right password..... then after a couple of mins where I can see the "process bar" screen I get an error message that just says " Not able to connect to "WNetwork Name"".
As I said I have tried this with several networks open or with security and with both levels of security (WPA or WEP). I have tried this with different networks, with different routers, and in different places.... but never got a wifi connection with this new laptop.
I have tried uninstalling the broadcom adapter, and reinstalling it downloading the driver from the official toshiba web site, also I have installed the last version of the "Added Value Package".... but still is not working.
I have other friends with HP, o DELL that are using Windows 7 which are able to connect to the networks I am not , and with no problem..
What else should I try to get this fixed??
Thanks a lot

Hi all
Thanks a lot for the answer, but I dont think I have understood it correctly. What you mean is that I need to use the same encription that works with the router and with the Wireless card of the laptop (Broadcom).... but for me that would not be the right answer I need.
Imagine that this can be the solution, so we need to change the security settings of my home wifi network and of our office to the one being accepted by the laptop,..... but what happens if I need to go to a customer, or to a cafe.... Do I have to ask them to change the security settings???.... my other laptos (even toshiba's) works fine with other networks... routers.... why is this one not working?.
I have uninstalled the wifi card driver and installed it from the last one found in the toshiba's support site.... dont know really what else I should do.
Please any advice will be very pleased.
Regards

OpenGL does not work on Satellite L30-X10

Hi there
I have a Thoshiba Satellite L 30 - X10 running on Vista home basic. I have a ATI Radeon Xpress 200M Video card. I am able to play DVD's and some games that do not require open gl but when I try to play Wolfenstien or call of duty it get the message that It cannot open GL and I must update my drivers.
I have updated my drivers, It still does not work.
In the Ati Catylst program it says that I have the card stated above and it gives me the 3d versionof the card but says no version available on the video card even though the device manager says that it is working properly.HELP.
Can anyone please assist me as I am not familiar with Vista.
my computer also will create back up points but will not restore on any of my back up points could this be affecting the open gl for gaming as everything else works well.
Thanks to all who can help
Message was edited by: Rees

Hi,
where did you downloaded the drivers? From the toshiba homepage? Maybe you should try these sites, they offer the most actual drivers:
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
and maybe you should checkout this site:
http://www.opengl.org/
I hope you will get your games runnning...
Greets

WI-FI is not working on Satellite C50-A-179

Hello everyone!
I own Toshiba Satellite C50-A-179 (PSCGAE) laptop with Windows 8 and recently I've tried installing Connectify on it.
However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop, and because of that Connectify couldn't work. I've tried to enable/install it somehow using tips found on the internet. One of the suggestion was to reinstall the Wireless Adapter driver.
I uninstalled the original driver, and reinstalled it again after downloading it from Toshiba website ( [here|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7934&selSh ortMod=3969&language=13&selOS=40&selType=97&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=97&page=1&ID=86778&OSID= 40&driverLanguage=42] )
I'm sure I downloaded and installed the right driver for the right adapter which is "Qualcomm Atheros AR956x Wireless Network Adapter". I made sure before the installation to check all the information about the adapter and the driver.
However, after the reinstallation wifi has stopped working completely:
-the wireless network connection icon/adapter from "Control Panel\Network and Internet\Network Connections" is there but it does not behave as it should, it just looks as a generic network connection icon and not a specific one-basically it doesn't represent the actual adapter and hasn't got the name of it in the note;
-wifi option in Windows 8 settings menu-Change PC settings-Network has disappeared altogether (bluetooth option is still there and so is airplane mode option);
-wifi can be turned on by pressing enable from the righ click menu of that generic network connection I've mentioned, but it won't pick up any signal and won't find any connections even though there definitely are some.
There are no yellow exclamation marks in Device Manager list and the wireless adapter is there as well, behaving and pretending as if everything was all right and working properly.
I've tried Troubleshooting, installing driver using Windows Update, installing and updating driver from its properties menu in Device Manager, and all kinds of things like that, but none of it has helped and wifi still does not work.
Basically, the laptop seems to be thinking that the adapter is working properly and everything is fine HW and SW wise, but in reality it isn't. I really don't know what else I should try, I don't want to reinstall the whole operating system because I'm afraid it (or I) would mess everything up even more (messing up even more drivers).
I'm running on a cable internet connection now, and I'm glad at least that is working (I really need the laptop for work and I can't afford to loose it for a day, let alone for longer)
Could anyone please help me?
Any ideas how to fix this and make wifi work again?
I'll be really thankful for any advice.
Thank you, Miko31.

Hi
In case the WLan card is recognized properly in device manager, the Wlan driver has been installed properly and I dont think that there could be a problem with WLan driver.
In my opinion you should check if the WLan card is enabled properly by using the FN key combination
Furthermore if Wlan has been enabled properly you should try to Add new WLan and should configure the Wifi once again.
This can be done in control panel-> Network & Sharing center -> Manage wireless networks (on the left) -> Add button
> However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop,
Regarding the Microsoft Virtual WiFi Miniport Adapter
You could enable this in device manager. Here choose your "network adapters", then you should find the Virtual Wifi Adapter. Now do right click it and enable it.
It could be also possible that Virtual Wifi Adapter is hidden. In such case you should first unhide it from the device manger, then re-enable the adapter from the device manger tools.
After that, you have to start your cmd (console) with admin right and should type:
+netsh wlan start hostednetwork+

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

Lan and WLan does not work on Satellite L40-18W

Hi all
I have TOSHIBA Satellite L40-18W and my problem 1- wireless not work & wired lan does not work.
I have download driver and every thing is ok but it does not work ( when i search by wireless i do not find any network. My router is working fine)
plzz help meeeee

Hi
Its hard to understand what you mean by not working.
What does this mean exactly?
Are you not able to connect to the internet or what?
Usually if the WLan card and the LAN card have been recognized properly in device manager then the drivers are working fine and the issue could be related to wrong router configuration or maybe to some enabled firewalls, etc
Firstly I recommend checking the router settings. Check if the router has been configured with the right data from ISP and if all other common options have been set correctly.
The notebook supports Realtek Wlan and LAN card.
Check if Wlan card uses the same WLan standard like the WLan router and if right encryption has been used too.

WRT54G not working with Satellite internet

Please help!
I purchased the Linksys WRT54G a few months ago, set up my home network (laptop with wireless running XP, desktop hard wired to router running 2000, and desktop wireless running XP) everything worked great!
I got the internet installed.  We ( the installer and I ) got the internet to work on my laptop, and he left, said the rest is up to me! I did not think it would be to bad, but I am stuck!!
My laptop no longer connects to the network! - I can ping the WRT54G but can not see any thing else. I can connect to the internet only if I plug directly into my laptop, if I go into the Linksys it will not work from any computer! My other two computers still see the network and can talk to one another but not to the laptop. I can no longer print from the laptop (which I could do before) the printer is off of the 2000 destop, used to work great!
I have tried some things that I seen here on the forms, "cloned the Mac address" "updated the firmware" and "power cycled" until I am blue in the face, but to no avail!
Additional info - There is a Linksys 8 port 10/100 Switch placed after the Satellite modem, to connect some other hard wired pc's in the house.
It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).
I hope you can understand my ramblings!
Any help is greatly appreciated!
Thanks
Message Edited by samsom on 06-17-200706:36 AM
Message Edited by samsom on 06-17-200706:37 AM

Satellite modem: LAN side set to 192.168.1.1 (assumed)
  dhcp enabled: range: 192.168.1.20-200
Switch: if this is an intelligent switch set it to 192.168.1.2
  dhcp: disabled
Router: set to 192.168.1.3
  dhcp: disabled
If the satellite modem using a different base setting (ie. 192.168.222.1) you must adjust all other values(222) to match.
samsom wrote:
It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).

Ethernet Controller is not working on Satellite L645D-S4030

Similar Messages

Maybe you are looking for