Ethernet Controller Showing Exclamation Mark in Device Manager.

....it says the drivers are not installed.
Where can I go to download the drivers for this? The download page: http://www.msi.com/service/download/ doesn't seem to provide any help.
My main board is an MSI G41M-p28

http://www.msi.com/product/mb/G41M-P28.html#/?div=Driver&os=All

Similar Messages

SOLVED! WAN Miniport #2 yellow exclamation mark in Device Manager

This topic is to collect some information, if someone has any, about the WAN miniport #2 virtual device in Windows 8
There are many complaints but so far there has been no resolution to the problem.
Just as a heads up, since it windows doesn't allow you to uninstall it I tried to delete it through registry and lost the ability to see any networks while the hardware itself was recognized and working.
EDIT: The **bleep** thing is out! Had to call excorcist in jk..
Anyway, I want kudos for this, now.
Found the solution following this link: http://oyam.ca/blog/2011/11/windows-miniports.html
FIne gentleman who runs it had a tip waiting for us, summary is below:
To do this, DO NOT edit the registries. There are number of other registry keys that depend on the miniports being present, and it is super easy to completely break the network stack, to a point where the base network card driver won’t work. (If you did this already, let’s hope your system has restore points — you can restore to previous snapshot and try doing it the non-registry way outlined there.) When doing this, take a note of the miniports that you are removing, you’ll need to know this later when reinstalling.
So, to remove each non-working miniport, do the following:
    Right click on the non-working miniport, choose “Update Driver”.
    Choose “Browse my computer”.
    In the next window, choose “Let me pick driver from a list”.
    Uncheck “Show compatible hardware”. From the “Manufacturer” list, choose “Microsoft”, and from the “Network Adapter” list, choose “MAC Bridge Miniport”. (It can be any device the user is allowed to uninstall.) *here I chose the first entry, Generic Broadband device driver.
    Back in the device manager, delete the device that just turned into the “MAC Bridge Miniport” device.
Once done removing the bad miniports, reboot. Don’t skip this, it’s important. Otherwise there is a change things will go bad again.
And it works!!! Rebooted two times just to be sure.
Solved!
Go to Solution.

I'm glad you've found a solution, however, when I go inte the Network Adapter List, I do not have the option of choosing "MAC Bridge Miniport" there is no such miniport. Does anyone have an alternative I can use? Or is there some other way to Solve this problem? I'm using a Lenovo ThinkPad Edge E530.

Ipad wont sync and exclamation point in device manager

I cannot get my ipad to sync with my new computer. There is an exclamation point in the device manager by this device and I dont know what it means. I do not want to uninstall itunes and reinstall as I am afraid I will lose all the music I have put in there......What does this message mean??
Windows cannot verify the digital signature for the drivers required for this device.A recent hardware or software change might have installed a file that is signed incorrectly or damaged or that might be malicious software from an unknown source. (Code 52)

Thanks , for responding .I am using windows7 and I have uninstalled the dvd drive and restarted the pc numerous times .When i try to update the driver through windows it does'nt work.I have downloaded all the software for my toshiba L300 from the toshiba website and everything works fine, but Toshiba only provides firmware for the pioneer dvd rom not the driver .
I can't find the correct driver anywhere without having to pay for it .The problem is that my dvd rom was working fine and suddenly it showed the exclamation mark in device manager and shows it as cd instead of dvd ..

No Audio Device Detected (but it shows up correctly in device-manag

Well, I bought a new soundcard, since I was tired of my old integrated one, and wanted good surround-sound. The model is Creative Sound Blaster X-Fi Xtreme Gamer Fatalty, and my old integrated one is a Realtek-HD (doesn't say more than that).
Now to my problem, I removed the drivers from Realtek (even cleaned lots of it from the registry) and put in the new soundcard in a PCI-slot, as it's supposed to be done. I then started the computer, canceled the automatic installation and installed the drivers from the CD I got with the card (this is what it said I should do), now the card shows up in the device-manager as "Creative SB X-Fi" and it tells me it's working fine etc. The Creative-update software also detects it so that I can download the latest drivers.
However, I have no sound, and in the control-panel's "sound & sound devices" it says "No sound device" and I can't do anything. :/ (not sure if this is what it's called in english, I'm using the swedish version of Windows XP Professional), I can select the soundcard in creatives Volume Panel (where it says "select audio device") without any error-messages, but when I double click the application (to change the volume etc.) it says it can't find any supported soundcards.
I tried removing the drivers etc. for the SB-card and installed the Realtek ones again, but it's the same thing there, it shows up in the device manager (under sound - video & gaming-units) but windows still says it can't find an audio-device. My guess is that there's some kind of conflict between the Realtek-integrated card and the new one.
Anyone got any ideas of what to do? :/
Edit: Also, the computer keeps wanting to install the integrated soundcard, but I can't seem to find any way to turn it off in the BIOS :/ (I have an ABIT motherboard, don't know what type, can't seem to find the box for it). The BIOS is called "Phoenix - AwardBIOS v6.00PG"
I have ofcourse tried to fully remove and reinstall the SB-drivers aswell, but no luck there. :/

next time go into control panel click on sounds, click on record, right click any where in the record box and then put check marks in the boxes that say show disabled devices, and show disconnected devices. Those devices disappear when the boxes are not checked making your pc think there is no output sound.

Sony z3 not showing up in google device manager

Sony z3 not showing up in google device manager
I have checked the mark under security....
same with my new sony z3 tablet.
Solved!
Go to Solution.

Strange thing. Are you willing to try the repair? Do it with PCC if you want to:
http://www.sonymobile.com/gb/tools/pc-companion/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

ITunes won't recognize my iPod. I have the Apple Mobile Device USB driver installed in my programs but it doesn't show up in my Device Manager or Services. Can someone help?

So I connected my iPod to iTunes and an error message came up saying it needed an updated version of iTunes 64 bit and I was missing the Apple Mobile Device USB driver so I downloaded it because another discussion said that was the solution. I did but it wont show up in my device manager or services. Can someone help me figure out whats wrong?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

Exclamation Point in Device Manager

There is an exclamation point in device manager under "Disk Drives" for "Apple Computer_Inc. iPod IEEE 1394 SBP2 Device", and also get an "Unkown Device Apple Computer_Inc. iPod IEEE..." in the safely remove hardware program. Ipod works fine most of the time, but get some errors when transfering files to and from ipod
Whats wrong?

Download pictures from my IPhone to my Windows computer.

Intel WiUSB shows yellow triangle in Device Manager

Why does Device Manager show me: ---------------------------------------------------------------- Intel® WiUSB This device is not working properly because Windows cannot load the drivers required for this device. (Code 31) Device ROOT\UOIP_BUS_DRIVER\0000 had a problem starting. Driver Name: oem36.inf Class GUID: {8A2EDC79-C759-46F2-88AF-9D4EFE3B5EEE} Service: XHCIPort Lower Filters: Upper Filters: Problem: 0x1F Status: 0x0 ---------------------------------------------------------- All Microsoft and Lenovo updates installed. OS is Win 8. thanks

Hey there justcurious,
Can you confirm the version of the WiDi Driver you have by chance? This may need to be udpated. I've noticed some issues around the USB-IF xHCI USB Host Controller across the forums and I wonder if they are related. Thank you!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Question marks at Device Manager on a K8N Diamond Plus

Hi all
I have just sorted out a CD/DVD Writer recognition issue with your help - the Community - when another merry surprise arises .
Sort story: Installing Windows XP, all drivers in AFAIK (including Marvell's) but.....the Device Manager brings me down to the hard reality with some nasty question marks on:
'Other devices'
   'SM Bus Controller'
   'PCI Memory Controller'
   'PCI Modem'
   'Other PCI Bridge Device'
Can't connect with my ADSL Wireless Router so I have to use my wife's laptop - not the best idea - to ask for your wise advice again.
Many thanks in advance .
Engadin.


Quote from: Fredrik on 12-March-10, 21:38:53
No, I can not recommend you using LiveUpdate with the system you seem to have right now. Use the Forum's USB tool. Find it very unlikely though that a BIOS update will make the question mark go away.
If you don't use a modem you can safely disable it in BIOS and then remove it from Deceive Manager.
Hi Fredrik and the rest of the team ,
I have just reinstalled XP SP2 in a very thin PC (Mainboard, Graphic Card, Diskette, HD and CD/DVD writer), installed the drivers found at http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=232, and guess what? Yes, still get the PCI Modem (PCI Bus 0, device 13, function 0) warning at the Device Manager. I use a Zyxel P660HW-D1 Wireless Router, so no modem - PCI or whatever - in my mind or my PC. The funny thing - if any - about all this is that I get these two messages at the Device Manager:
1. Under Device Status Tab, 'The device is not correctly configured (Code 1)'.
2. Under Driver Tab, clic on Driver Details and I get this: 'No driver files needed or already installed for this device'.
So, it's on the 'Configuration' side. But to configure what?, a phantom thingie?.
And, of course, this inexisting device, the PCI Modem, gets detected - how can it do it if it doesn't exist? - each and every time I reboot, asking me for installing the driver (already installed or not needed, Device Manager dixit), and so on.
Suffering this annoying behaviour for more than a week, please, can you advise me on how to get rid of it at BIOS and Device Manager? Thanks a lot in advance.
Engadin.

I cannot see my iPod in my iTunes or in Computer in Windows 7, but it shows up in the Device Manager

I am running Windows 7 and have had no problems with with the 3 iPods we connect, but as of a couple days ago, the computer will no longer recognize them. Other USB devices (flash drives and Android phone) have no problem being recognized. Additionally, if I have my iPod plugged in before I start iTunes, my laptop will not open iTunes until I unplug my iPod. My laptop will also not shut down if my iPod is plugged in, and will only shut down if I unplug it. It will recognize that my iPod is plugged in and connected (it lights up and charges), but does not show up in the My Computer. The iPod is recognized in Device Manager. Also, when I unplug any of the iPods, it will show up for just a second in the My Computer before disappearing. I have tried the following:
Restart computer
Uninstall/reinstall iTunes and all Apple programs
Renaming for a higher drive (Other drives aren't in E: drive)
Putting anti-virus programs on my computer and doing a full-scan
Disk defragment
Deleting Temp folder (I have stopped all programs on my laptop and it still won't let me)
Stopped iTunes/Apple services and re-enabled them
Updating Driver Software
Please Help

have had no problems with with the 3 iPods we connect, but as of a couple days ago, the computer will no longer recognize them.
The problem is with ALL of the iPods, at the same time? Are they are shuffles?
It is unlikely that three iPods would go bad at the same time, so the other possibilities are bad USB cable, the bad USB port on computer, or a software issue on computer?
If these are different types of iPods and you are using different USB cables, that probably rules out bad USB cable. Since the iPod is recognized by the computer and other devices are recognized, that probably rules out a problem with the USB port. So, that leave a software issue on computer as the most likely cause.
Did you install any new software (or change the setting of software) on the computer at the time this problem started, particularly something that runs continuously in the background, such as security software?
You've trying uninstalling and re-installing Apple software. Is there a way you can disable other third-party software systematically?

Photos in iPhoto showing exclamation mark

I had some pictures in my iPhoto trash and I tried to restore them to iPhoto, but now when I click on them to edit or view an exclamation mark appears. I downloaded iPhoto Library Manager and it hasn't helped. Any suggestions?

To make a temporary backup copy of your library Control+click on it and select Duplicate from the contextual menu.
So, make a temporary, backup copy and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Why does Visual STudio 2012 References keep showing Exclamation mark (which means assembly is missing) even after I specify the exact path?

Our web application at work requires Visual Studio 2012
For one of the projects within the Visual Studio 2012 Web Application Solution, we need the System.Web.Mvc in the References.
I already have the following in the packages folder:
{blah...blah..Visual Studio Solution path..blah}\packages\Microsoft.AspNet.Mvc.5.1.1\lib\net45\System.Web.Mvc.dll
I keep adding it, but the References still shows the Exclamation mark ( which means missing) next to the System.Web.Mvc
Why does it keep showing the Exclamation mark ( which means missing) , even after I specify the exact path to the System.Web.Mvc.dll ?

Hi cslewis33,
Thank you for posting in MSDN forum.
Based on your issue, if you want to add the System.Web.Mvc reference for a web application in VS2012. As far as l know that the System.Web.Mvc dll is default be located like this path:" C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 4\Assemblies\System.Web.Mvc.dll.
So if you create the web app using c# language, I suggest you can right-click your Reference under the we application -> Add Reference->select the System.Web.Mvc in the Assemblies tab.
If the above suggestion still could not help you, I suggest you can consult this issue directly to the ASP.NET forum:http://forums.asp.net/ , maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

New hard drive shows in Bios and device manager but not in windows explorer in windows 7

I have added a new sata 500gig hard drive and it is recognised in the bios, but is not recognised by windows explorer, though the disk is showing in device manager as a hard drive . I have followed the example on the forum by going to computer management and rescanning disks, to no avail.
Any ideas how I can get to use the drive?
My comp is a packard bell and all the details are here:- http://support.packardbell.com/uk/item/?sn=845014390330&g=1400
Hope someone can help.
Rob

Thanks Dale (and everyone else). A cure! Sorry I did not reply earlier, but have been trying all known fixes to no avail... However. The second of your links in the last reply of yours (starting, New Drive or mapped network drive) worked with a slight variation in windows7, as follows is how I achieved joy.
Right-click My Computer , and then click Manage .
Under Computer Management (Local) , click Disk Management .
This far is as above, then I'll add comments to the existing help to show my variant.
In the list of drives in the right pane, right-click the new drive and then click Change Drive Letter and Path(s) .
Here it still did not show the drive in the right window, but below it there is a second window listing disks and one of them unallocated and without a drive letter was my new drive. IMPORTANT! This set of info may not be apparent unless you enlarge the box by dragging it, as the default only shows the top box (so I have missed it until now on all my searching). Right clicking on this gave a set of obvious choices to create a choice of drive letter, format and options (NTFS etc) and this created the drive for me. I am sorry I am vague on the box choices, but on right selecting a live drive it doesn't bring up the "unallocated" box choices again. Many thanks and I hope my variant helps anyone else with a similar prob. Thanks again - Rob
Click Change , and in the drop-down box, select a drive letter for the new drive that is not assigned to a mapped network drive.
Click OK , and then click OK again.

Yellow mark in device manager under other devices pci driver for B50 laptop with Windows 8.1 64 bit

Dear All,
in device manager - other devices - pci device is with yellow mark os:windows 8.1 , laptop B5070 series .
in PCI events tab mesage is:
Device PCI\VEN_10EC&DEV_5229&SUBSYS_380117AA&REV_01\00000001004CE00000 was configured.
Driver Name: null
error code 28
pls. suggest how remove yellow mark, suggest or provide link to get compatable driver.
regards,
Mallik
Solved!
Go to Solution.

Good day and welcome to the community.
Based on the device string you included, http://www.pcidatabase.com/index.php returns the following:
Device Id Chip Description Vendor Id Vendor Name
0x5229 Realtek PCIE CardReader 0x10EC Realtek Semiconductor Corp
For reference, here is the link to your mahine's support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
and here is the sublink for the Win8.1 drivers for the device detailed above:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Ethernet Controller Showing Exclamation Mark in Device Manager.

Similar Messages

Maybe you are looking for