Ethernet driver for HP p7-1414

I need the Ethernet driver for my pc for Win 7. I have found all drivers including the WiFi driver so I can connect to Internet. But when I plug in my student cable, it doesn't do anything. My pc still remains connect wirelessly. So I need that driver. It a HP p7-1414. Thanks.

Hi:
Rather than hunting down all of the drivers individually, the easiest thing would have been to find a model with the same motherboard as yours which has Windows 7 drivers.
All of the W7 drivers from this slightly older model will work on yours.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=5231479&task=

Similar Messages

  • ACPI Ethernet driver for Win 7?

    Hello
    I've no idea if I am even near the correct place to be. Would love to find out from someone who knows where I can find on Microsoft's web-site, the  ethernet driver for acpi. It turns out I haven't one on my computer and how I lost it is anyone's guess
    as I really am computer illiterate. D-link doesn't always work so I would love to replace my ethernet driver.
    Have Win 7
    Help please??? and Thank you so very much~ Teena

    Here is the forum for you

  • Ethernet driver for WXP is not working on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
    In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

    Hi
    I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
    However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
    If you want you can download and install the Lan driver from the Intel page:
    http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
    There you will find the drivers for the Intel 8256x Ethernet Controllers
    Bye

  • Ethernet driver for my a6744uk destop

    I had to reformate my desktop so i am missing Ethernet driver for a6744uk desktop Vista.  I have looked on hp website but would have more luck winning the lottery hope someone can help.  Thank you

    Dear Customer,
    Welcome to the HP Consumer Support Forum!!
    Please try and install the driver using the link below:
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
    Select the opertaing system and install the driver accordingly.
    Hope this helps, for any further queries reply to the post and feel free to join us again.
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    GR1
    Although I am an HP employee, I am speaking for myself and not for HP

  • VT6122 Gigabit Ethernet driver for Kernel 2.6 (Fedora Core 2)

    Hi,
    I'm looking for the VT6122 Gigabit Ethernet driver. The manufacture doesn't provide it. And at MSI there is only a version for kernel 2.4 available! Can anybody tell me were I can find this driver?
    Txs!!!

    got it.
    it was the tune2fs problem that is in the knowledge base.
    http://digital.ni.com/public.nsf/allkb/A2D53C8E0D88380B86256EBD005B31D2
    looks like it's working now.
    thanks.

  • Can't find Ethernet driver for x64 XP Pro

    Hi Everyone,
    I recently install x64 XP Pro to T61 machine and search for Ethernet driver in the Lenovo's website.
    I can't find it.  My T61 got Duo Core 2 2.4GHz, 2Gb of Ram. NVIDIA Quadro NVS140M 512MB.
    I thank you in advanced and look forward to your response.
    Hoang

    Don,
    Thank you very much for the link to Intel internet driver.  Now, I am looking for audio, sound and graphic drivers for x64 XP Pro OS.  I had tried drivers in Lenovo website and it didn't work.  All x64 drivers are made for Vista.  Also, I tried Nvidia website and they didn't have required graphic driver.  My T61 system hardware is Intel 2.4 GHz Duo Core 2, Nvidia Quadro NVS 140M 512MB, 2GB RAM memory.  I look forward to your response and you have nice day.
    Cheers,
    Hoang

  • No Ethernet driver for Dell T1600

    Hi There,
    I am trying to do an install on a new Dell T1600 but cannot proceed due to the lack of ethernet support for this machine (Needs Latest Intel e1000e)
    The standard install ISO does not have the latest e1000e kernel module  for this ethernet.
    So my initial workaround was to install a testing ISO from here -> http://releng.archlinux.org/isos/2011.06.10/
    ... but these images get part way through the boot of the ISO and then the screen goes blank (udev stage)
    Any Ideas,
    Cheers,
    Bernie

    tomk wrote:
    e1000e is not available outside the kernel tree.
    See if you can find any recent live cd/usb that boots successfully and supports your NIC - once you have that, you can do this.
    Thanks, but that link sounds far to complicated ... can I not just get the e1000e driver from the other Live install disk onto a USB disk, then use the standard Arch install CD and copy the module to the correct place and modprobe it during/before the network setup stage?
    Don't suppose anyone can send me an e1000e kernel module from a recent Ubuntu box (or other distro with an upto-date kernel ..)?
    Last edited by bmentink (2011-07-11 23:02:53)

  • Missing Ethernet driver for Z440 Workstation?

    Hi there,
    I just reinstalled this workstation with win 8.1 and used the driver recovery CD for installing drivers but there seems to be missing a driver for ethernet and windows doesnt reconize it either so...pretty annoying.
    PCI\VEN_8086&DEV_15A0&SUBSYS_2129103C&REV_05\3&11583659&0&C8
    I hope someone can help with this!
    Kind regards,
    Allan
    This question was solved.
    View Solution.

    Hi, Allan:
    You need this driver...first or second file as applicable.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23071

  • Ethernet driver for T20

    hi i am tryin to find ethernet drivers for ThinkPad T20 2647-41G ...and will this driver work with XP
    thanks

    Welcome to the forum!
    Your ThinkPad hasn't originally come with a LAN card, just with a modem. If the LAN card has been installed, you'd need to identify it by a FRU number on it as either Intel or 3Com, and take it from there.
    The simplest way to find out whether you actually have a LAN card installed is to press F1 when booting, enter BIOS page and look under MAC address. If it says "not applicable", you'll need to replace your modem with a combo card, or start using a PCMCIA one. If there is one, open the slot in the back and find the FRU number on the card. After you've done that, put the number in "search" function on Lenovo's website, and the card should pop-up.
    XP includes drivers for both of these cards, even in the retail version.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Ethernet driver for PC side

    I want to access the web from the PC side of my Macbook. Where can I find a driver for the ethernet card?

    thediesel,
    you should be able to access the Internet with either BootCamp or Parallels with the provided drivers.

  • Ethernet driver for windows 7 64bit 2000 2b53CA

    Hello,
    I have downgraded my Win 8 to Win 7 Home Premium 64bit. All the drivers loaded except the SMBus Controller and the Ethernet controller. I have tried some of the Win 8 drivers, but they did not work.
    I have disabled the controller at this point, wireless is working OK.\
    Any suggestions?

    Hi:
    You can use all of the W7 x64 drivers and software from this model on yours.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5275...
    The smbus controller driver is this one...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104727-1&cc=us&dlc=en&lc=en...
    The ethernet driver you need is this one...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104622-1&cc=us&dlc=en&lc=en...

  • Lookout Modbus Ethernet driver for Do-More PLC?

    I see AutomationDirect has now come out with a Do-More PLC CPU that uses DirectLogic 205 hardware. Their documentation states that the new CPU Ethernet port communicates with protocols that include:
    Modbus/TCP Client (Master) and
    Modbus/TCP Server (Slave)
    Would the Lookout Modbus Ethernet driver communicate with this?
    Solved!
    Go to Solution.

    Yes, Modbus driver supports ethernet
    We us the ECOM-100 and MB-Gateway
    Forshock - Consult.Develop.Solve.

  • HP34972A Ethernet Driver for LabView 8.0

    Hi,
     I'm trying to use our new HP34972A meter with LV 8.0. I can only find drivers for HP34970A for LV 8.2 and higher that support the ethernet port. Do you have or can you make drivers for LV 8.0 that support the ethernet port on this meter? (I did find the serial port driver but would prefer not to use that interface).
    Thank you.

    Hi fireman_bob1,
    As you said, there is not an available driver utilizing Ethernet and LabVIEW 8.0 for the HP34972A. However, I recommend going to the Version Conversion Forum to see if the NI forum community may be willing to back-convert the components of the driver you have LabVIEW 8.2, to LabVIEW 8.0. Most of the driver components should be very similar, so this may allow everything to work with LabVIEW 8.0. Unfortunately, if it does not work, you may have to use the serial port driver. 
    Best Regards,
    Thomas B.
    National Instruments
    Applications Engineer

  • Ethernet driver for yokogawa

    I trying to communicate with a Yokogawa DA100 DAQ with a Yokogawa
    DT300-41 ethernet card. I'm running windows NT and will be using
    LabView for temperature DAQ.
    Yokogawa says I need to buy their software and the driver is included.
    I have LabView 5.0 and that's what we will be running.
    Does anybody have any suggestions on drivers to access the DA100?
    Sent via Deja.com http://www.deja.com/
    Before you buy.

    Hi,
    There are LabVIEW drivers for DARWIN DA-100 covering all types of
    interfaces and communication modules (Ethernet-TCP/IP, GPIB, Serial
    RS232 etc...) available at Yokogawa's free download page. Go to:
    http://www.yokogawa.co.jp/Measurement/English/software.html
    For TCP/IP there's a base driver and a sample application.
    Husam Abdawi AL-Mosa
    Amman - Jordan
    In article <82rdfq$72t$[email protected]>,
    [email protected] wrote:
    > I trying to communicate with a Yokogawa DA100 DAQ with a Yokogawa
    > DT300-41 ethernet card. I'm running windows NT and will be using
    > LabView for temperature DAQ.
    > Yokogawa says I need to buy their software and the driver is
    included.
    > I have LabView 5.0 and that's what we will be running.
    > Does anybody have any suggestions
    on drivers to access the DA100?
    >
    > Sent via Deja.com http://www.deja.com/
    > Before you buy.
    >
    Sent via Deja.com http://www.deja.com/
    Before you buy.

  • When will NI update the GE 90-30 Ethernet driver for new GE PLCs

    I was told last year that NI would update the driver to support the 90-30 PLCs with on-board Ethernet.

    Win B.
    National Instruments is aware of the problem and still working on it.
    You can however go to the folowing link:
    http://sine.ni.com/apps/we/nicc.call_me?p_action=country&p_lang_id=US
    And go to the product feedback section to submit your concerns.
    Regards,
    Cyril Bouton
    Applications Engineer
    National Instruments
    Cyril Bouton
    Active LabVIEW Developper

Maybe you are looking for

  • Please help! How do you MMS with the Red BB Curve 8330m (4.5.0.131 software/f​irmware) on Sprint ?

    Greetings!!! I'm a newbie to BlackBerry devices but a long time user of cell phones and I have just one question which I hope isn't a difficult one to answer.  I don't know if I'm missing something here, but how do you send an picture or photo via MM

  • Network folders for "other" user

    I have managed to set up a lab of iMacs (new) bound to AD via Windows Server. I had users make shortcuts to their 3 main network folders. Works fine. Users can't always get to "their" workstations though so I'd like to set up the "other" user to load

  • Lossless TIF to PDF conversion

    Hello, I want to convert many (multipage) 24bit color JPEG-compressed TIF files (from scanner) to a PDF format, lossless, in order "to gain the Acrobat functions on the TIF". I thought it was possible to have the PDF as plain "TIF container", but did

  • ITunes won't start - memory cannot be "read"

    This may have something to do with the upgrade, but I'm not sure. Everytime I start iTunes i get an Application Error message for iTunes.exe The instruction at "0x74614d69" referenced memory at "0x74614d69". The memory could not be "read". Click on O

  • X1 noisy keys

    Hi, I bought me a X1 and so far I am quite happy with it on day 1. However, two of the keys are somewhat noisy and I am wondering if and how I could fix it. The 'w' key makes quite a loud click noise once it is depressed. The sound is not there if pr