Ethernet driver for WXP is not working on Satellite A100

Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

Hi
I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
If you want you can download and install the Lan driver from the Intel page:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
There you will find the drivers for the Intel 8256x Ethernet Controllers
Bye

Similar Messages

Window 8 TouchPad Driver for U300e is Not Working...

Hi,
I have installed the Window 8 Drivers for Idea Pad U300e. After installed Touch Pad Driver, The Touch Pad is not working anymore. To use mouse, I have to plug in external mouse and have to uninstall the Touch Pad Driver. After removed it, It working fine again. It is working fine but why i want to upgrade the touch pad driver from lenovo is there got plum sensitivity and disabled the track pad using the function key. Any Expret suggestion on how can i do the driver to work fine??
Best Regards,
Mahar.

Hi
I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
If you want you can download and install the Lan driver from the Intel page:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
There you will find the drivers for the Intel 8256x Ethernet Controllers
Bye

Driver for OfficeJet J4580 Not Working with Windows 7 Professional

I am trying to install the driver on a new Toshiba laptop but the driver keeps failing. I have tried the Basic and Comprehensive drivers. After downloading, I get a prompt to extract the driver, then I get an error message that says the file is corrupt, cannot extract. I get the same error message with both drivers. I am downloading the drivers from the HP website. I am using Windows 7 Professional 64-bit. I do not have the printer plugged in (it's plugged into my very old Windows XP laptop and works fine there). I have left e-mail messages to Support through the HP site and have not gotten an answer. Is this printer just too old for my new computer? Do many of the HP printers have problems with Windows 7? Any assistance is appreciated. Thank you!

Hi @OrdinaryHPUser,
Welcome to the HP Forums!
I noticed that you cannot install the driver for your HP Officejet J4580 on Windows 7. I am happy to help!
Full feature software and drivers, are available for this printer on Windows 7. So the printer is compatible. I would recommend to try the following steps:
Uninstall the software. Uninstalling the Printer Software. (Only if the software is partially installed, otherwise you can skip this step.)
Clean boot the computer. How to perform a clean boot in Windows.
Disable any Antivirus programs. Disable Antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Create a new user account. Managing User Accounts and Logins (Windows 7).
Reinstall using the HP Printer Install Wizard for Windows.
Hope this will solve the issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Keithley 2400 driver for Labview 8 not working

I searched the boards and found this driver for a Keithley 2400 that should run with Labview 8. I have Labview 8.6.
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...
I put the driver folder in the proper location and the vi's are appearing in the selection menu as expected. I have my Keithley 2400 connected to a serial port on COM1. When I simply try to run the initialization VI it doesn't work. I know it's communicating in some form, because my Keithley goes into remote mode and the initialization driver is able to properly read what the model of the Keithley is. When it gets to the VISA read vi it is timing out, but still outputs the correct model identification. I don't understand why it's timing out and not working.
Is there something else I should've installed? The driver readme says the only additional software required is NI-VISA 3.2, however I have version 4.4, so I should be fine. I just don't understand why it's "sort of" working. Any help would be greatly appreciated.
Solved!
Go to Solution.

It doesn't sound like it. You are using serial and that requires nothing beyond VISA - plus simple commands are working. The fact that the drivers can send and receive the SCPI identification command tells me that you are communicating with the instrument. (That is what causes the instrument to tell you what kind of device it is.) The thing to remember about drivers you get from vendors is that they can be very buggy. Often times they were written by someone who doesn't know LV very well, or were perhaps donated to them by one of their customers. I always view vendor-supplied drivers as simply a starting place for creating really usable ones.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Latest I-tunes download AMD USB Driver for xp will not work therefore cannot sinc ipad

I have downloaded latest I-tunes version 10 and am experiencing problem with the Apple mobile device USB driver not working correctly.
I have tried deleting all apple software and re-installing again - without success!
I am trying to Sync primarily an I-pad2 but also an older Ipod classic
I am operating on XP Pro with SP3.
Can anyone help please?

Welcome, and thank you for a thorough input! Hope I don't miss something you already said!
Quick version: Try setting processor voltage to 1,5 volt.
Long version:
Posting at wrong FSB can be put down to two things:
1 The processor isn't what you thought it is, but I think you eliminated that.
2 The system cannot run the processor at the correct speed. Mainly this has to with overheating, and/or that memory and processor cannot cooperate. This must be it, as you noticed the processor is correctly recognised.
You have little connected right? Then the best thing would be to pull power cable out. Take the motherboard and redo the seating of the processor, this is much better done with motherboard taken out.
At the same time, I suggest you clear CMOS. Should always be done when changing processor, and I've noticed on the Internet there are a few 1,5V XP2800 around.
http://64.233.183.104/search?q=cache:Q4eIa6OhudcJ:forums.amd.com/lofiversion/index.php/t47487.html+AXDL2800DLV4D+problem&hl=sv&gl=se&ct=clnk&cd=1

FN keys not working on Satellite A100

I posted a question back in febuary with little success in a solution.
The fn keys on my laptop are not working, the only time the work is while the computer is booting up.
Once my display screen comes up they mysteriously stop working. I have been told to download all kinds of things from this website which i have but everytime i go to install them they won't let me.
If some one actually has a thought out response to this question please post.
I need to know what i need to download and how to install it.
Pretty simple, please respond with those answers.
thank you

In Windows Vista there is a difference between accounts with "computer administrator" privileges and the Administrator account.
In the Administrator account the User Account Control is disabled. Also by default, the Administrator account is present, but hidden and disabled.
You can enable it using 2 difference methods:
_Method 1_
Start by booting your computer to Vista in your computer administrator account Next open administrative tools in the control panel. Double click the computer management item, this will open it. You then authorize user accounts control by clicking the continue button. Double click on "local users and groups", this will open it.
- Click the user's folder.
- Select the administrator icon.
- Right click it to open its content menu.
- Choose properties.
- Remove the check mark from the "account is disabled" box.
- Click OK.
- Restart your computer.
Once your computer has restarted, open the administrative tools control panel.
In the Users area, disable any other enabled accounts with computer administrator privileges.
Look for account icons that do not have the red disable mark.
Click to place a check mark on these account icons.
Next you open Properties.
Click to add a check mark in the box labeled "Account Is Disabled."
Check to see that your Administrator account is enabled.
You can now close Computer Management and restart Windows.
When vista reboots the administrator account will be loaded automatically.
Be advised that this method is for temporary use only, for security reasons. You should never leave your Administrator account enabled without a password.
_Method 2_
Turn on your computer. As Windows is starting up, when you see the "Starting Windows" come on your screen, quickly press F8. In a dual-boot environment, this can be done easily from the boot menu.
When the boot menu is showing:
Using the arrow or tab keys, you will select "Microsoft Windows" (this is the option that runs Windows Vista). Do not press Enter, instead you press the F8 key, and you will progress to the Safe Mode boot screen.
At the Safe Mode boot screen, you will select the first option, "Safe Mode".
Press Enter. It will take a few moments but Vista will present to you a login screen that has two options, Administrator and Other User.
Click on the Administrator icon. Your Windows Vista Administrator account has now been enabled.
Then you could try to log as admin and could remove the VAP ;)

Nokia PC Suite does not work on Satellite A100-234

I have installed Nokia PC Suite in my notebook (Satellite A100-234) unfortunatelly its not working. The same cable and Mobile is getting connected with other PCs.
Kindly send your valuable suggestions.

Hi
Could you please be more specifically???
Did you get any error messages or something else???
Maybe something goes wrong during the installation procedure
Therefore I would recommend removing this Nokia program and try to install it again.
Additionally I would recommend checking the PC Suite FAQ on the website

Rt2800usb driver for TL-WN321G not working

Hello,
I have a TL-WN321G Wireless dongle that won't work on my arch (kernel 3.12.9-1).
I tried it on Ubuntu on another partition on my laptop and worked.
I tried doing `lshw` on Ubuntu and got the following for the dongle:
id: network
description: Wireless interface
physical id: 3
bus info: usb@3:3
logical name: wlan62
serial: 74:ea:3a:8c:56:0e
capabilities: ethernet physical wireless
configuration:
broadcast = yes
driver = rt2800usb
driverversion = 3.5.0-28-generic
firmware = 0.29
ip = 192.168.1.71
link = yes
multicast = yes
wireless = IEEE 802.11bg
`lsmod` on Arch produces:
Module Size Used by
rndis_host 7770 0
cdc_ether 7380 1 rndis_host
usbnet 26842 2 rndis_host,cdc_ether
mii 4035 1 usbnet
usb_storage 48007 0
arc4 2008 4
nvidia 10621511 27
x86_pkg_temp_thermal 6999 0
intel_powerclamp 8642 0
joydev 9671 0
coretemp 6334 0
brcmsmac 512967 0
kvm 388581 0
cordic 1120 1 brcmsmac
brcmutil 4581 1 brcmsmac
crct10dif_pclmul 4754 0
crct10dif_common 1380 1 crct10dif_pclmul
crc32_pclmul 3027 0
b43 364869 0
crc32c_intel 14257 0
ghash_clmulni_intel 4509 0
rt2800usb 20261 0
aesni_intel 46132 0
uvcvideo 72836 0
aes_x86_64 7407 1 aesni_intel
ssb 55507 1 b43
lrw 3573 1 aesni_intel
rt2x00usb 9162 1 rt2800usb
gf128mul 5866 1 lrw
mmc_core 95691 2 b43,ssb
rt2800lib 74627 1 rt2800usb
rt2x00lib 37775 3 rt2x00usb,rt2800lib,rt2800usb
videobuf2_vmalloc 3280 1 uvcvideo
videobuf2_memops 2343 1 videobuf2_vmalloc
videobuf2_core 27963 1 uvcvideo
snd_hda_codec_hdmi 30162 1
iTCO_wdt 5407 0
alx 25231 0
videodev 111332 2 uvcvideo,videobuf2_core
glue_helper 4617 1 aesni_intel
pcmcia 45396 2 b43,ssb
media 11751 2 uvcvideo,videodev
mac80211 468058 5 b43,brcmsmac,rt2x00lib,rt2x00usb,rt2800lib
ablk_helper 1980 1 aesni_intel
cryptd 8481 3 ghash_clmulni_intel,aesni_intel,ablk_helper
pcmcia_core 14264 1 pcmcia
rts5139 332075 0
i915 657857 2
cfg80211 412662 4 b43,brcmsmac,mac80211,rt2x00lib
crc_ccitt 1371 1 rt2800lib
iTCO_vendor_support 1937 1 iTCO_wdt
evdev 11085 17
psmouse 85460 0
bcma 36200 3 b43,brcmsmac
snd_hda_codec_conexant 36759 1
intel_agp 10880 1 i915
mdio 3533 1 alx
serio_raw 5049 0
snd_hda_intel 37000 4
intel_gtt 12664 2 i915,intel_agp
microcode 15216 0
ideapad_laptop 9969 0
drm_kms_helper 36254 1 i915
sparse_keymap 3154 1 ideapad_laptop
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
drm 238270 5 i915,drm_kms_helper,nvidia
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
rfkill 15651 2 cfg80211,ideapad_laptop
i2c_algo_bit 5399 1 i915
ac 3332 0
thermal 8532 0
battery 7573 0
processor 24903 0
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
button 4677 1 i915
video 11196 1 i915
lpc_ich 13376 0
snd_timer 18726 2 snd_pcm
i2c_i801 11277 0
i2c_core 24632 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
mei_me 9400 0
mei 62286 1 mei_me
shpchp 25465 0
snd 59109 13 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd
ext4 474699 2
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83440 1 ext4
hid_generic 1161 0
usbhid 40577 0
hid 90742 2 hid_generic,usbhid
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30821 3
ahci 23088 2
libahci 21642 1 ahci
libata 171112 2 ahci,libahci
scsi_mod 130669 5 rts5139,usb_storage,libata,sd_mod,sr_mod
ehci_pci 4000 0
ehci_hcd 59252 1 ehci_pci
xhci_hcd 145281 0
usbcore 180104 12 uvcvideo,rndis_host,rts5139,rt2x00usb,usb_storage,rt2800usb,ehci_hcd,ehci_pci,usbhid,usbnet,xhci_hcd,cdc_ether
usb_common 1656 1 usbcore
Since rt2800 is in the driver list, shouldn't the dongle just work?
`rfkill list` produces for the dongle
6: phy4: Wireless LAN
Soft blocked: yes
Hard blocked: no

tomk wrote:Ehmm.. unblock it.
I tried `rfkill unblock 6`, it was unblocked but if I run `ifconfig` I don't get an interface for the dongle.

Need proper driver for cd/dvd not working

TOSHIBA SATELITE M45-S269
I saw a few different drivers in the download section related to sound/dvd but not sure which one is right. The two that I tried downloading were zip files full of hundreds of different files?
I'm just looking for the right driver to reinstall to fix this yellow exclamation error next to my driver in device manager.
Cant play music or game cd's properly anymore
Thanks for any help

Satellite M45-S269
The optical drive is supported natively in Windows XP.
Double-click it in Device Manager and tell us what Device status has. It's on the General tab of the Properties box.
-Jerry

CD/DVD drive Acoustic Silencer does not work on Satellite P100-194

Satellite P100-194 (Win XP MCE, Bios-Version 2.20)
Since there is excessive vibrating of the DVD-Multi-Drive with some of my DVDs and CDs, I would like to use the Acoustic Silencer, but theres no difference between Silent Mode and Normal Mode.
I have already tried to reinstall the Acoustic Silencer Tool, without success. Since this problem is starting to get really annoying, any help would be appreciated.
I wonder if the built-in DVD-multi-drive is that sensitive by default (sometimes the entire notebook starts vibrating combined with a very high noise level when reading a dvd) ?
Thanks in advance !

Hi WB,
I believe the Acoustic Silencer simply limits the rate at which information can be obtained from the CD/DVD with the intention of preventing the very high speed rotation that can sometimes occur when ripping CDS or DVDs to the hard drive. If you are simply watching DVDs (or listening to CDs for that matter) then the drive speed will not be particularly high since once the read buffer is full then there is no need to read any more data from the disc itself. If you watch the drive LED you will see that it only lights intermittently.
The drive speed will decrease during playback as the laser reads the information from the outside portion of the disc surface.
The presence of noise and vibration normally indicates that the disc is 'eccentric' or is not clamped centrally in the drive, and this can indicate a possible problem with the clamping mechanism itself. However, it is always worth checking that the centre hole in the disc itself has no burrs or pieces of materila that would throw it off-centre, and it is also worth checking if the disc label (assuming it is a stick-on paper type) is properly attached and has no buckles or air bubbles in it since this can also cause noise.
I have experience of a couple of CD-ROM game discs which cause a lot of noise and vibration in my notebook and on checkin I found that the centre hole was very slightly offset.
regards,

CD/DVD Not working on Satellite A100.

Hi
When I put a CD into my computer, it does'nt get read. And when I go into My Computer, there's no sign that I even have a CD/DVD driver. This is very annoying, since I bought my computer for gaming. Ive no idea what to do.
Does anyone know what's wrong?

I can see it in the boot menu, but when i run the option called CD/DVD it comes up with a bit of text which was pretty hard to read, because it dissappeared while saying that it does'nt exist. The recovery disk didnt change anything. I tried running the Toshiba Diagnostic Tool, and everything was as it should be, exept for the CD/DVD Driver, which it just skipped.

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?

The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

ACPI Ethernet driver for Win 7?

Hello
I've no idea if I am even near the correct place to be. Would love to find out from someone who knows where I can find on Microsoft's web-site, the ethernet driver for acpi. It turns out I haven't one on my computer and how I lost it is anyone's guess
as I really am computer illiterate. D-link doesn't always work so I would love to replace my ethernet driver.
Have Win 7
Help please??? and Thank you so very much~ Teena

Here is the forum for you

Ethernet driver for HP p7-1414

I need the Ethernet driver for my pc for Win 7. I have found all drivers including the WiFi driver so I can connect to Internet. But when I plug in my student cable, it doesn't do anything. My pc still remains connect wirelessly. So I need that driver. It a HP p7-1414. Thanks.

Hi:
Rather than hunting down all of the drivers individually, the easiest thing would have been to find a model with the same motherboard as yours which has Windows 7 drivers.
All of the W7 drivers from this slightly older model will work on yours.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=5231479&task=

Integrated WebCam for Thinkpad X1 not working.

Hi guys, I have a new X1 thinkpad... initially the webcam was working but now I could not seems to get it work. I also could not see this in the device list. Tried re-installing the driver but it does not work. Anyone knows how to fix this issue?

Hey there jerry_bp,
I have to agree, it sounds like you are having a hardware issue. In this instance it is most likely the connection for the camera is loose and you will need to contact service to have the issue resolved. The number for the US Service Center is 1-800-426-7378, before calling make sure you have your Machine Type, Model Number, and Serial Number.(Found On the Lenovo Sticker on the underside of machine) Good Luck, and keep us posted of your progress.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Ethernet driver for WXP is not working on Satellite A100

Similar Messages

Maybe you are looking for