Ethernet for file transfer: Power Macintosh 7100av to IMac

I've been able to find some discussion on this subject but I remain at a loss to make it work. The purpose is to save some really grainy old digital pics circa late 90's from the old PowerMac before recycling it. I just obtained a MO437 Apple transceiver to allow connection with the aaui on the back of the old computer. The 7100 is running system 7.5. I think I was able to activate the ethernet port. I tried connecting the two machines both by direct connection using RJ-45 as well as indirect through a router. In the "chooser" on the old Mac I was not able to recognize the new IMac. I did find some instruction to do this on the net but it referred to using the chooser on both machines----system 10 no longer has this, correct? I'm sure I'm leaving out some important details, but if anyone can offer step by step or direct me to---it would be appreciated!
Happy Holidays and Happy New Year

7.5.3 and later File Sharing
Any Mac running 7.5.3 or later (with at least OpenTransport 1.1.2 and AppleShare Chooser extension 3.7.4) can share the files of any Mac running OS 9 or later using built-in File Sharing using IP. What is not supported beyond 10.3 is File Sharing via AppleTalk. In addition, Sharing initiated from your 10.4 or 10.5 Mac to a Mac before OS 9 is not supported directly. So you will have to make the connection from the Older Mac end. Alternatively, you could install "Shareway IP" (a low-cost utility) on the older Mac and connect from the newer Mac.
You need an appropriate Ethernet connection, and each Mac must have a similar (but not identical) IP Address. On the 10.4 or 10.5 Mac: You must turn on File Sharing in your 10.4 or later Mac:
System Preferences > Sharing > Services pane > \[X] Personal File Sharing
and click ( Start )
Look up the 10.4 or 10.5 Mac's IPv4 Address in System Profiler OR Network Preferences, and write it down for later. It may resemble 192.168.0.6
On the Older Mac: open the Chooser and select AppleShare. Your 10.4 or 10.5 Mac will NOT appear in the right-hand pane, because it does not speak AppleTalk File Sharing protocol. But do not despair!
It can speak IP protocol, if you ask it nicely. So click on the "Server IP Address" button on the bottom of the right pane, and enter the IPv4 Address of the 10.4 or 10.5 Mac.
The login screen that appears is sent to you from the 10.4 or 10.5 Mac. Enter a Username and password that is valid on the 10.4 or 10.5 Mac. Choose the drive(s) you want to mount, if there is a choice, and they will appear on the desktop of the Older Mac as shared Network Drives (Drive Icon with a cable coming out the bottom).
Drag whatever you like to the newly-mounted drive. It will appear on the 10.4 or later Mac. Try to resist the temptation to drag your whole drive all at once. Move smaller batches in a thoughtful way, and you should have no problems.
TA23008- Mac OS X 10.4 Tiger: "Connection failed" error when connecting to an AFP server
http://homepage.mac.com/car1son/os9xnet_nfilesharing.html

Similar Messages

  • Which protocol we should use for file transfer in ios ?

    which protocol we should use for file transfer in ios ?

    My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

  • Steps for File Transfer through FTPS...!!!

    Hi ,
    Can anyone please tell the steps for file transfer with FTPS.
    Does PI file adapter has bulilt in feauture to handle this? or
    Do we need to deploy anything to handle this?
    Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
    Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
    File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
    Please suggest me.
    Thanks
    Krupakar

    Hi Shabarish,
    We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
    Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
    Ip: XXX.YY.YY.ZZZ
    Port: 990
    User and pwd.
    and I am getting the same below error
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
    I tried by selecting different options like
    1. Without selecting the X509 certificate for client authentication.
    2.  Keystore as TRUSTED\view\entry-cert
       X509 certificate and private key as TRUSTED\view\entry-cert
    3. Keystore as TRUSTED\view
      X509 certificate and private key as TRUSTED\entry-cert
    4.Keystore as "view"
      X509 certificate and private key as "entry-cert"
    Please help me in this.
    Thanks
    Krupakar

  • Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

    Hi Recently i have upgraded developer 6i by applying patches.
    After when i am trying to submit active users and active responsibilities.
    Those also getting completed
    But when i am trying to click button view output or view log
    I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
    Can anybody tell me what is the issue. Waiting for your reply
    Ganesh

    I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
    The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
    Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1

  • Use Ethernet for file transfers to iMac?

    Hi -- In earlier Powerbook use I used to like using the "Target Disk Mode" to drag files from my laptop to my desktop machines, but of course my new MacBook has no firewire.
    is there anyway to connect my MacBook to my iMac using an ethernet cable, to drag sel;ect files from the portable to the desktop machine? I've got some multi-gig files I need to shuttle back and forth occasionally, so it's pretty tedious to chug along via wireless . . .
    Any other suggestions for most convenient means of shuttling big files?
    Thanks

    Yes, you can use Ethernet to transfer files via File Sharing. If you have a home network then you can share files over your home network whether it be wired or wireless. You can also create a computer-to-computer network by connecting two computers directly via Ethernet cable.
    Select Mac Help from the Finder's Help menu and search for "file sharing." Search for "network" to find an article on computer-to-computer networks.

  • Need keyboard shortcuts for an old Power Macintosh please

    Hi all
    I’m try to copy 2 folders from the desktop of an old Apple Power Macintosh to a ZIP drive.
    The mouse on the Power Mac doesn't work, so I’ve to use keyboard shortcuts to move the folders.
    My problem is that I can’t find the right keyboard map on the web for a computer about 15 years old, and the OSX keyboard shortcuts don’t work on this computer.
    As far as I can work out the Power mac is before G3 and is a 6000 to 8000 model. If anyone knows the shortcut to find the exact software version, that will be great.
    So could anybody please suggest to me the keyboard shortcuts for the following commands:
    Open ZIP dive folder
    Move back to desktop
    Copy folder on the desktop
    Select ZIP drive folder
    Past the folder from desktop to ZIP drive.
    I can’t find any info on the web, so any suggestions will be greatly appreciated.

    Under Mac OS 8 or later, you can select a file or folder in the current window (or on the desktop if no windows are open) by typing the first few letters of its name. You can also use the arrow keys. I don't remember whether these work in System 7.
    Apple-O opens a selected file or folder. Apple-W closes the current window.
    Apple-C and Apple-V are copy and paste, respectively, but I'm not sure if they'll work for copying files and folders. I'm not sure if there's a keyboard shortcut for moving files and folders.
    If you can find "Script Editor" (it might be in a folder named "Applescript"), you could use it to write a script that will move the folders. Follow these instructions:
    Find and open Script Editor. Apple-F opens the "Find" window.
    In Script Editor, enter the following:
    (Instead of XYZ and ABC, enter the names of the folders you want to copy. And instead of MyZIP, enter the name of the Zip disk.)
    tell application "Finder"
    duplicate folder "XYZ" of desktop to disk "MyZIP"
    duplicate folder "ABC" of desktop to disk "MyZIP"
    end tell
    Press Apple-R. That should copy the folders to the Zip disk.

  • Plz hel for file transfer using zmodem protocol

    someoe plz help me. i have to devlop an application that transfers files betwn 2 pcs(both ways) using dial up connection, further it should autodial the connection at periodic times.
    i am trying to use Zmodem file transfer protocol. i succseed in sending string (for test)using my sender program with hyper terminal open on the other hand. it prints the string. but when i use my receive program, similar to given in samples(simpleread.java) it doesnt work.
    actually when the ring comes from the sender how to send command to modem to hang up and connect to the calling pc if there are any such commands then plz help.
                                  ----sameer

    someoe plz help me. i have to devlop an application
    that transfers files betwn 2 pcs(both ways) using dial
    up connection, further it should autodial the
    connection at periodic times.
    i am trying to use Zmodem file transfer protocol. i
    succseed in sending string (for test)using my sender
    program with hyper terminal open on the other hand. it
    prints the string. but when i use my receive program,
    similar to given in samples(simpleread.java) it doesnt
    work.
    actually when the ring comes from the sender how to
    send command to modem to hang up and connect to the
    calling pc if there are any such commands then plz
    help.
    ----sameerU ddnt abrvt nuf. I r3r1t 4 U.
    Sum1 plzz hep m3. i 1/2 2 dvlop app taht xfer fil betwn 2 pcs(bth wys)...

  • Alert Configuartion for File Transfer

    Hello,
            I need some pointers in setting up the alerts for the file transfer for the given two scenarios -
    1. An alert is generated everytime the polling fails i.e. the file adapter does not find a file to be read
    2. An alert is generated when the file is transferred. I am just doing the file transfer so I am not using the message interface.
    One option for this is to generate the mail by using JMS adapter, but I would prefer alert creation.
    Thanks.
    Regards,
    Mayank

    Hi,
    With Alert Framework you can apply the alert notifications wherever the file transfer in XI will failed.
    Refer
    XI : How to Re-Process failed XI Messages Automatically
    XI :  How to Re-Process failed XI Messages Automatically
    XI: Alerts - Step by step
    The specified item was not found.
    For successfull messages there will not be the alert notification  available. But as its mentioned by Amir, you can send mail confirmation with mail adapter, or can go for JMS adapter for sending the successful messages.
    Thanks
    swarup

  • 8900 to imac bluetooth connection for file transfer

    Hello,  I  have a brand new curve 8900 javelin and a new IMAC.  Both devices can see each other and I can manage to get a green connection light however it only lasts a few seconds and then disconnects.  Can someone please tell me how to overcome this problem?
    thank you 

    That's really weird, the different ways that the providers cripple the same phone. I do not need any plug-in for BT iSync but I can't do file transfer with BT or with USB (I do have a microSD card installed). Unfortunately, I have no use for iSync. I can also use the phone to provide Internet access for my Mac but the Mac is a desktop and a hardwired connection makes more sense.
    The USB connection is really frustrating. Profiler knows that the phone is present and the phone knows that the Mac is present (the battery does charge) but otherwise it's as if it's not even connected.
    I am able to put the card into a card reader and transfer files that way. I don't mind all that much but it's not easy getting the card out of the phone.
    By the way, there are several RAZR versions. Is your "V3XX" the same phone as my "V3m?"

  • Bluetooth - any hope for file transfer in near future???

    Hi,
    Presently iPhone 4 does not allow bluetooth file transfer to other mobile devices and even my PC.
    I am not interested in illegal music/video transfer but genuinely transferring my data files between pc and other mobile devices and use it like a mobile storage device. I don't like the idea of mailing my file and then downloading it again when I have both devices in my hand! It's not helpful when other devices do not have internet connection or limited internet usage.
    Please let me know if apple policies would allow it to make file transfer possible in near future (except music and video). Otherwise it would greatly reduce its usability for me.
    *I hate its file storing and transferring features.*
    *Another reason for hating iPhone is 'Flash'.*
    Apart from this, its simply superb.
    agmad

    Hoekstes wrote:
    Why is something so simple its available on 10 year old Nokia 3310 bricks not available on an iPhone. Its ridiculous.
    Because there is nowhere to put the files on an iPhone. There is no common file storage area on an iPhone that all apps can access. Each app sits in a sandbox for security purposes. Each app can only access its own files. You would have to have an app running where the files would go, and then the files would only be available to that app.
    The old Nokia has a common file area and does not have the security the iPhone does, but then 10 years ago you probably did not need the security.

  • TC - Painfully Slow for file transfer. How to solve it (PC + MAC) ?

    I have a dell laptop and a mac book air, both connected to my TC. Transferring files is a joke. I am a novei mac user. How can this slowness issue be fixed for both the pc and mac? As I am writing this, i am currently doing a software update on my macbook air, getting 10.5.3 now. Does this solve it?

    Similar problem here.
    iMac using 802.11n to connect to time capsule. Time capsule configured to use 802.11n (b/g compat), and WPA/WPA2 security.
    Typical transfer rate (file transfer from imac to tc) of about 2Mbps. After reboot of the TC, speed can sometimes hit 6Mbps.
    I have played with the security settings. After a softboot with new config:
    - no security, 802.11n mode: 12Mbps throughput
    - WEP security, 802.11n mode: 8Mbps
    - WPA/WPA2 security, 802.11n mode: 6Mbps
    Enabling interference robustness seems to have little or no effect.
    All of these speeds are significantly lower than what I'd expect.
    No other devices were on the wireless network during the testing.
    I've read that alot of others are having similar issues. I suspect that most of these devices are running extremely slowly, but most people aren't bothering to check throughput.
    Would love to know if there is a real fix out there. 802.11n should be much much faster than this. If I could reconfigure the TC to use 802.11g, I would.

  • Can you use Airport for internet and Gigabit Ethernet for file sharing?

    i would like to complicate my network setup by using my Airport connection to the internet for internet access and then use the Gigabit Ethernet connection between my G5 tower and the MacBook Pro for file sharing, Compressor's distributed rendering, and possibly iTunes music/video sharing for Front Row.
    is this possible? could i just run a cat 6 cable between the two and network them together? or do i need to get a Gigabit Switch?
    i suppose i could just try running the cable between them and see what happens. i don't think these new machines require cross-over cables since the ethernet ports auto-detect that now, but is a cat 5e or cat 6 cable required for Gigabit speed?
    thanks,
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.5)  

    Yes it would work. The Ethernet network would be used for local file transfers and the Airport for internet. However you will need to make sure Ethernet is at the top of the list of network ports in the Network Preferences.

  • Slow Transfer Speeds For File Transfer Manager 5.0 Build 0032

    I have a 20Mbit internet connection. When I download from the Microsoft download site I can get files downloading at reported speeds of up to 1.7 Mbytes per second.
    When downloading from the TechNet Benefits section I have to use the Transfer Manager and I can only get speeds that vary between 30-80 Kbytes per second. Rarely any faster.
    I am using XPPro & IE7 straight out onto the Internet via my router / firewall. No proxy server.
    What can I do to speed the process up or bypass the File Download Manager?
    Regards.

    Thanks for your feedback Tekky.  FYI there is also a forum specifically for TechNet Website Feedback which is the more appropriate place for TechNet Subscriptions questions at http://social.technet.microsoft.com/forums/en/tnfeedback/threads/
    There are many suggestions in this post about improving your network speeds when downloading from MSDN and TechNet subscriptions sites.  Here is one more place to look for tips, which we have linked to from our Downloads and Product Keys FAQ (MSDN version, TechNet version): 
    The website for the Microsoft File Transfer Manager, particularly their troubleshooting page which includes additional discussion on configuring the FTM and on slow transfer speeds. 
    As Julie stated above, you can call TechNet Customer support and they can take you through some additional troubleshooting and diagnostic steps to assist.  Julie has linked to the support phone numbers in her reply.
    Thanks,
    Mike Kinsman

  • Airport Extreme Card for my Apple Power Macintosh G5 Dual Core (2.3) Late 2005 - M9591LL/A - PowerMac 11.2 - A1117

    Hello there, I have an Apple Power Macintosh G5 Dual Core (2.3) Late 2005 - M9591LL/A - PowerMac 11.2 - A1117.
    What Airport extreme & Bluetooth card I need?  why the memory are so hard to find? can I use another faster DDR2 memory?
    Sorry for to many question but I search on "Saint Google" and there is too much information not precise.
    Tnxs a lot
    Pablo

    You need an Airport Bluetooth module with the required runway card.
    Here is the kit:
    http://www.dvwarehouse.com/Apple-AirPort-Extreme/Bluetooth-Upgrade-Kit-for-Power -Mac-G5-Dual-Core--Quad-Core-Late-2005--MA252G/A---Refurbished-p-36513.html
    Get memory here:
    http://eshop.macsales.com/shop/memory/PowerMac-G5-Memory
    100% compatible and lifetime guaranteed....
    You can use a faster memory, but it will not run faster, will likely report wrong and may give other issues.

  • Where can I find the jar file for File Transfer Service API

    Hi all ,
       I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
    <b>import com.sap.engine.services.file.RemoteFile;
    import com.sap.engine.services.file.FileTransfer;
    import com.sap.engine.services.deploy.DeployService;
    import com.sap.engine.services.deploy.container.WarningException;</b>
    Thanks in advance ,
         Tahzeeb

    Hi,
    you can find these jar files in the installation directory of NWDS:
    ...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
    ...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
    Regards
    Sebastian

Maybe you are looking for