Ethernet hard drive (1TB or higher) with firewire

Hi, does anyone know where I can get one of these that I can daisy chain to another firewire (Lacie) hard drive to expand my offline storage?
Lacie do their 'Ethernet Big Disk' but annoyingly this only has a USB out...
cheers
Simon

I am looking for
' a drive that acts as "Network
Attached Storage" via ethernet (NAS) and that can
accept an additional drive via firewire?"
and i can seem to find one
I'm confused by your post title: Ethernet hard
drive (1TB or higher) with firewire
Are you looking for a drive that acts as "Network
Attached Storage" via ethernet (NAS) and that can
accept an additional drive via firewire?
Or a firewire drive that can daisy-chain to an
existing firewire-connected drive?

Similar Messages

  • Setting up an Ethernet Hard Drive as a Server?

    Hello all, I hope your year ends well and the new one starts just as. I have a somewhat quick, i hope, question regarding an ethernet hard drive that I am looking into buying. My friend and I are trying to set it up so that he can access it from the internet without being on the same network (as in: another country) and I know that certain ethernet hard drives are set up with an IP address... so my question is whether or not it is possible (and probable) to set it up as a server so that we can still access our files. I am pretty new to all this so thank you for your indulgence. Any help would be greatly appreciated.

    Not sure if this is what you are looking for, but here's an option: http://www.yellowmachine.com/

  • I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

    I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
    I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
    I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
    iMac 27-inch, Late 2012
    Processor  3.2 GHz Intel Core i5
    Memory  32 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GTX 675MX 1024 MB
    Software  OS X 10.9.3 (13D65)@

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

    My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done?  Why did this happen, the overloading of the Time Machine?

    Why has the TimeMachine drive run out of space?
    With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
    Will you have this problem with a 3TB drive?
    I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up  more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
    Moving Forward
    Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

  • I buy the new imac,late 2012 with a hard-drive 3TB and i want to change with another hard-drive 1TB....where i can buy?

    i buy the new imac,late 2012 with a hard-drive 3TB and i want to change with another hard-drive 1TB....where i can buy?

    It's also much more difficult to install third-party hard drives in current or recent Macs than it was. See:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
    The 2012 iMacs are also in essence glued together and very difficult to disassemble and reassemble. The bottom line is: don't try it.
    Why, if I may ask, would you want to remove the 3TB drive and replace it with a 1TB drive? What is it you hope to achieve even if it were possible?
    Regards.

  • Airport Express with LaCie Ethernet Hard Drive

    I have an existing airport express that currently is serving me just fine for wireless internet access (for mac mini, two pc laptops), print sharing and itunes.
    I recently purchased LaCie's Ethernet hard drive. I am not able to use the usb port for to set the drive up - but was told buying D-Link Wireless G Router would do the trick and work in "tandem" with the AE. Anyone know how to figure this out? No problem using the AE for just print sharing and itunes - but does anyone know if this can be done? I would like to hook up the ethernet drive and possibly a Tivo but am limited w/ the Airport Express. At the same time, I don't want to replace the benefits of having the AE and do not need it to necessarily extend my network either.....

    Well...I did just that - bought a D-Link 4-port router and hooked everything up. I disabled the AE router and have not been able to find the drive at all on any of my wireless connections. However, when I hooked up an ethernet cable from my laptop (pc) directly to the new router - i was able to see drive and access the login dialog box.
    After having to reset the AE - and reestablishing the wireless network and checking all connections - I still had no luck. My wireless internet connection was working just fine so it appears that this setup is close to working - but still no recognition of a ethernet drive. Any ideas? Thanks.

  • Thinking about an Ethernet Hard Drive

    This is also posted in the expansion topics.
    I'm thinking about an external Ethernet hard drive for my iMac.
    Have any of you tried one and if so what do you think about them?
    Where will I get higher transfer rate Ethernet or USB 2?
    Last question, will I be able to boot up from an Ethernet hard drive for running DiskWarrior on internal hard drive or for emergencies(cross fingers)?
    Thanks for your replies in advance.

    I'm going with a FW400 external hard drive as a primary backup for my iMac (speed), but I'm thinking about trying out the D-Link DSM-G600 Wireless Network Storage Enclosure as a third backup on a different power supply. Basically the DSM-G600 is a hard disk enclosure with gigabit ethernet (like the new iMac and PowerBooks), wifi and a USB port to expand the storage capability. I figure its a good cheap start to check out network-attached storage at home, and if its good I may either stick to it and add additional ones as my needs grow, or move up to that one NAS 4-drive unit that everyone raves about (lost on the make and model at the moment). There are lots of NAS enclosures out there, but the DSM-G600 is the only one I've seen under $200 with gigabit ethernet.
    PB 1.25GHz, 1.5GB ram, 80GB/5400rpm HD   Mac OS X (10.4.3)   Soon: iMac G5 2.1GHz, 1.5GB ram, 500GB HD

  • Ethernet hard drive and iTunes

    I have a MacBook with 60GB and a PC with 100GB Hard drive, both connected trough a wireless router. I usually play my music (iTunes) in the Mac, but I dont want to fill it up with music.
    If I buy an ethernet external hard drive, can I play the music from there. In other words, the transmission of the information is fast enough or the music will not play properly?
    Or should I buy an external hard drive and plug it in the PC when I listen music there and switch it to the Mac when I listen music in the Mac?

    Hard drives do not usually come with Ethernet connections. They usually come with FireWire or USB connections. If both of your computers are on the same wireless network, why not just turn on iTunes "sharing" from your PC and then you can find the songs from the PC while using the MacBook? If all the songs are already on the PC, no need to put them onto another device and keep unplugging it and plugging it into a different computer all the time. I share my iTunes in between my Mac mini, iMac and MacBook all the time through my AirPort network at home, it's plenty fast enough.
    -Doug

  • What is max internal hard drive transfer rate compatible with a 2007 MacBook Pro?

    In attempt to upgrade my mid-2007 MacBook Pro (Intel Core 2 Duo), I bought a Seagate 750GB listed as compatible with my computer on MacSales.com . . .
    Seagate Momentus XT ST750LX003 750GB 7200 RPM 32MB Cache 2.5" SATA 6.0Gb/s Solid State Hybrid Drive -Bare Drive
    Installation appeared to go well and I ran an extended hardware test with no issues found.  However, the drive is listed at 5.46 TB (would be nice) and I get an input/output error when attempting to partition.  I can initiate an erase, but after the time I would suspect it would take to erase the drive, I get an input/output error - it seems to appear after the first 750 GB of the '5.5 TB' was erased.  At all times, the drive is not recognized when I attempt to install OS X from original discs.
    I suspect the 6.0 GB/s transfer capacity of the hard drive is not compatible with the MacBook Pro.  The drive came with 4 jumper pins but no jumper and no label diagram to set a slower transfer rate.  I called Seagate, Newegg, OWC, and Apple, but no one has compatibility info for my MacBook Pro.  To them, it appears I am running the first tests of this new technology with an 'older' MacBook Pro.
    My MBP has had no issues - I'd like to keep her going with the optimum internal hard drive capacity, but don't necessarily want to set up a test bench in my house (though my kids would enjoy destroying it) and pay several shipping and restocking fees to test new hard drives.
    The original drive had a 1.5 GB/s transfer rate.  Does anyone know the maximum transfer rate compatible with a 2007 MacBook Pro?  3.0 GB/s?  1.5 GB/s?  Thank you.

    No spinning hard drive will transfer data faster then 60-80MB a second. The XT models have a flash storage area that is used when reading and writing data that can make it Appear faster in some situations. That flash memory if only 8 or 16GBs in side, I forget which one.
    The drie is rated to work on 6GB SATA bus but it certainly can not transfer data that fast. It should be backword compatible to work on slower buses.
    Your drive is 750GBs in size. Not wure where you are getting this 5.5TB (that is 5.5 Tera Bytes which is 5500 Giga Bytes. Your drive is under 1TB)
    What are you using to partition the drive? Disk Utilities from the original install DVD?
    You need to install on your old drive, Update it from the Apple Website then clone it to the new drive. The version of OSX you are using may not function correctly with that large of a drive. Or get yourself a copy of Snow Leopard, retail disk for $29 from Apple, and do all the partitioning and installing with that version od OSX.

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • External hard Drive will not mount via firewire tpo my Powerbook G4

    I have a Powerbook G4 1.5, 2 Gb Ram and an 80 Gb Hard Drive. Well my problem is, I went and purchased a Western Digital External Hard Drive. The box states that this hard drive is compatible for both Windows and Mac. But for some reason I can't get the external hard drive to mount via the firewire. However it will mount by using the USB.
    So can someone please provide some troubleshooting tips on how I can get this external hard drive to mount?
    Thanks

    hi there,
    in your case, your drive is probably bad because the copy was interrupted. your hard drive may be finished, but more likely, just the file structure is damaged and/or you have bad sectors.
    you have a few options:
    *if you don't need the data back:*
    • see if the drive appears in disk utility and try to erase/reformat (make sure to zero out data to avoid bad sectors)
    • if it doesn't appear, try a pc. it won't recognize it, but it may allow you to reformat/initialize it. then, connect back into mac (which will recognize a pc formatted drive) and reformat as mac os x extended (journaled).
    *if you need the data back:*
    • try a program like data rescue II, file salvage, or boomerang data recovery first to recover the data
    • see if the drive appears in disk utility and try to repair disk
    • if that doesn't work, try disk warrior and/or drive genius
    • if you aren't successful, you may want to try a professional data recovery service (or me first, to ensure that you actually need someone as high tech as drive savers)
    • if you are successful and are able to recover the data, then erase the drive (zero out data) and then move the data back, to ensure you're working off a well formatted drive.
    fyi, if your computer freezes in the future, be sure to try appleoptionesc first and force quitting the problem application. if that doesn't work, try controloption+appleeject (shutdown) and/or optionappleeject (restart). if those doesn't work, in this situation, the next best move would probably have been turning off the power on the hard drive. if that doesn't unfreeze the system in a few minutes, then hold the power button.
    hope this helps,
    brian
    corewerkz/briancometa.com/

  • Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?

    Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?

    If you are speaking of the USB 3.0 Canvio, you are not alone. Call Toshiba and check on their progress in alleviating the problem. I heard they are blaming Apple, but since theirs is the only drive that exhibits this problem, I think the burden is on Toshiba.
    Some users have reported that by using a micro USB 2.0 connector (see bottom picture), instead of the 3.0 that comes with the drive, that it is a workaround. Notice that the 3.0 connector has sort of a "dual head" nature to the construction. One part of it is 2.0 USB micro compatible. I've never tried it myself though.
    Read ths thread for a discussion on the subject.
    https://discussions.apple.com/thread/3510032?tstart=0

  • Ethernet hard drive w/ iPhoto & iTunes??

    I run a G5 and my wife will run a new iMac, and we would like to share/use the same iPhoto library and iTunes library via our ethernet connection and ethernet switch. Currently we are doing this by placing these libraries/files in a shared folder on my G5, and sharing them from our two accounts on the G5 only. The way we would like to use the two computers (with the new iMac) would include the capability of NOT having both of them powered on all the time. So, could I place my iPhoto libray and my ITunes library on a ethernet hard drive connected to my ethernet switch, and then be able to access/use the programs from both computers? (I know that we would not be able to use the same iPhoto library from both computers simultaneously. Has anyone tried this? Thanks!

    should work... i wouldnt however redirect ituens and iphoto the network directories... instead id replace the Music and Pictures directories in each users symlinks in each user home folder with symlinks to the mounted share.
    Youll also want to make sure you get an ethernet disk that can be formated as HFS or NTFS (or maybe UFS, not sure on that though) and that supports AFP or NFS sharing in addition to or instead of SMB. IVe found SMB to be not so good for this kind of thing.

  • Ethernet hard drive

    I've read many topics but still didn't find the answer, sorry in advance.
    I've connected an ethernet hard drive to my airport extreme. Windows (bootcamp) and my powerbook G4 do recognize the hard drive with a utility that comes with the installation disk with the hard drive. This utility is not suitable for Mac OS X (10.5.2).
    Is there a way to recognize the hard drive without this utility in 10.5.2 or do I have to wait for an update?
    Thanks in advance!

    Finally everything is working fine. The problem was that the software delivered with the hard drive (Freecom, 500G, ethernet drive) was not compatible with Mac OS X (10.5.x). After i wrote an e-mail to freecom support explaining the problem, they sent me a link with the needed software (NDAS utility).
    Thanks for your replies anyway!

  • Looking to buy a regular definition hard drive camcorder to use with FCP 2

    Hey all, thanks for clicking my posting. Here's the deal, I am in the market for a hard drive camcorder for use with Final Cut Pro. Will be recording sports and sports-related material (but obviously want to use it for other things as well down the road). I am using an older 1.6 Ghz tower from about 5 years ago, but am using the latest OS 10.5.7. Am looking to spend about $500, but can go up a bit if needed. Since I am using an older Mac I know that I cannot use a high def cam with it, and and this point it's not needed for what I am doing.
    Was looking at the Panasonic, Sony and JVC Everio lines. I had made up my mind to grab the JVC since it has the best reviews of any of the mid priced cams out there, but was sharply warned by my Apple teacher (and 2 others there at the time) not to buy it since the .mod file format doesn't play nice with Final Cut Pro. I was going to Streamclip it into .dv but was told that I will lose quality and quite possibly audio sync. After a bit of checking around the web I found that there is an analog output of the Everio camera that I could put into my Canopus ADVC - 55 and then capture it with Final Cut Pro (the only question I have is, should I go from digital, through an analog output, only to capture it with a digital format again? Seems to me I should not go digital-analog-digital).
    So let's get to the question here then, can somebody more knowledgeable than myself tell me which cameras to look at to do the job? I guess my backup cam would be the Sony SR-47, decent reviews but not as good as the Everio. Also, are there any cameras in that price range that will simply let me pull the footage right into the bin of Final Cut Pro, or do they all have to be converted from MPEG 2 into .dv (or whatever file format I want them in). I know this is a lot of questions, but I am sure there's some cameras that I might be missing, so anybody care to help me out? Thanks in advance!
    Tom

    As far as I know, that is the only list of compatible drives with the router.  So, yes, that is the list I am referring to when I said "compatible drive list".   There are very few 2TB or 3TB drives on the list.  I would really like to be able to use a 3TB drive with a couple partitions, and that seems almost impossible with very few options.  I have been reading around the last couple days and I hear lots of reports of people successfully using drives that are not on the tested compatible list.  I just wanted to know more options from people like that.  

Maybe you are looking for