Ethernet Intel 82562 pro/100 installation problem on sun 10

HI,
I have installed sun 10 on my Pentium 4 machine. but sun os has not detected on board intel 82562 pro / 100 Ethernet card.
I also searched for drivers on net but could not find any thing.
any one will help me out.
Thanks,
Rajesh

In your Applications folder, there should be an app caller Server.app
Double-click that to start the server installation.

Similar Messages

  • Solaris 8 on Intel STL2 server board - installation problem

    Hi,
    I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
    It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
    Booting kernel/unix...
    SunOS Release 5.8 Version...
    then reboots after 2 seconds.
    Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
    Finally, I found the very strange specification update info of STL2 board, published by Intel:
    "13. Sun* Solaris* 8 installation issues
    PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
    IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
    WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
    My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
    I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
    I would appreciate any help. Thanks.
    Matt

    The problem has been resolved.
    I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
    Matt

  • X100e win xp pro usb installation problem

    Hello to all, i am new here and sorry for not not introducing myself properly bu this is urgent situation.
    Few days ago i bought Lenovo x100e Netbook
    Product ID: 35086AG
    Athlon MV40(1.6GHz), 1GB RAM, 160GB 5400rpm HD, 11.6in 1366x768 LCD, ATI Radeon HD2200, 802.11bgn wireless, WWAN upgradeable, Bluetooth, 1Gb Ethernet, UltraNav, 3c Li-Ion, WinXP Home 32
    here is link from lenovo driver download site for this netbook:
    http://www-307.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=35086AG
    Netbook came with preinstalled Win. XP Home edition and i was going to install Win. XP Professional.
    So i created bootable USB stick Win. XP Pro. installation (cause this netbook dont have internal cd drive) and booted on startup and started installation.
    Installation was going smooth -> i choosed C partition, formated it and after formatting next message shows up:
    "The following value in the .SIF file used by Setup is
    corrupted or missing:
    Value 0 on the line in section [SourceDiskFiles]
    with key "SSA.exe."
    Setup cannot continue. To quit Setup, press F3."
    So as you can see...i can't go on with installation and problem is the disk is already formatted and i have nothing on it, no OS no nothing.
    Please help cause i need laptop soon.
    Solved!
    Go to Solution.

    I solved problem,
    As i could not find vanilla, i found standard Win. XP Pro. with SP3, and using nLite added ATI AMD RAID AHCI driver to it and using multiboot 10 put that on USB stick. It booted with no problems and installed
    Thank you for pointing me in right direction.

  • MagicBulletLooks1.4 for Premiere Pro CS5 Installation Problem:'unauthorized-register or reinstall'

    Hi,
    I have a problem with installing Magic Bullet Looks 1.4 for Premiere Pro CS5 on my computer. Upon installation, when I launch PrPro, drag and paste 'Looks' video effect on a clip on the timeline I get every time the following message:
    'Magic Bullet Looks is unauthorized - please register or reinstall'
    The clip over which I apply the Looks effect starts flickering and if I try to open the Looks' 'Edit' in Effects Control it fails and I got the following message: "Unable to create a preview frame for LooksBuilder'
    I tried to reinstall the software (as administrator) three times but the outcome was every time the same. I need to add that 'Magic Bullet MisFire' that came with Looks 1.4 installs properly and works just fine.
    Have you experienced the same problem? Can you please advise me how to fix it?
    Here are my system specs:
    Windows 7 (64bit)
    Adobe Master Collection CS5 (64bit)
    CPU: Intel i7 - 930
    12GB RAM
    Mobo: Asus P6T
    Graphics card: nVidia 250GTS (from MSI) with 1GB DDR3
    Thank you in advance!

    Harm,
    Magic Bullet Looks v1.4 is the latest one and the only one that works with the 64bit CS5
    http://www.redgiantsoftware.com/products/all/magic-bullet-looks/
    http://www.redgiantsoftware.com/products/all/magic-bullet-looks/compatibility/
    Igor

  • Adobe premier pro cs6 installation problem.

    Hi I am trying to install adobe premier pro cs6, In between my system got restarted once again i tried to install it but installation is coming in Chinese language, Before my system restart it is in English language, How to get installation in English?, Urgent help needed thanks in advance.

    If you're saying the system crashed during the install, it might be a good idea to sort that out before installing PP, if only because sorting that out could potentially lead to a full rebuild of Windows.

  • Adobe Acrobat Pro 8 Installation Problem

    I've had Adobe Acrobat Pro 8 running fine for several years on XP Pro.  Our company rolled out upgraded hardware with a new image about a year ago, and I cannot successfully install 8 on any of the units.  Most recent issue, using CD, install went up to accepting end user license. I accepted and then installation froze and I had to End Program.  When I try to launch now, Getting Started splash screen comes up then program freezes and terminates.  It seems like a permissions/security issue, can anybody assist?

    I assume the new system is Win7 and most likely a 64-bit system. If so, you may just have to upgrade to AA XI. Folks have gotten AA8 to work on a Win7 32-bit system. You might be successful if you download the updates for AA8 and install those. I think it took at least AA8.1 to work with a 64-bit XP.

  • Logic pro X - installation problem

    I purchased my Mac Apple Store Italy (on line) in February 2015, with funding
    In the configuration of online mac I added the application LOGIC PRO X (200 €).
    As soon as I received the MAC appeared nell'AppStore updates to be done, including an update of LOGIC.
    Unfortunately I tried to update the application but I can not. After contacting several numbers with their assistance we realized after about a month that those who have installed Logic Pro X on my Mac (some of the Apple Store) is not associated with the application Logic to my apple ID and it does not appear in Logic ' list purchased applications.
    So I have installed on my MAC LOGIC a pro X original, but it is as if it were not because it is not linked to my ID and I can not update it.
    I'm talking to three months with a guy Enterprise Advisor, Apple Distribution International,
    Hollyhill Industrial Estate, Cork, Ireland, but I can not solve the problem.
    The thing starts to bother me and I did not expect a similar attitude from Apple that tells me that it can not rimborsami cost LOGIC because the mac (with logic included) purchased through financing, does not give me alternatives to uninstall and re-Please install Logic so that it's mine, and I find myself with a program paid 200 euro and it is as if it were cracked.
    It seems normal ????? I paid regularly and followed what I had to do. The apple has already received the money and I find myself with a problem having paid 200 euros !!!!
    I hope apple after 3 months will solve my problem QUICKLY.
    Thank You
    Cristina

    I hope apple after 3 months will solve my problem QUICKLY.
    Writing here will not help you as we are Users like yourself and not Apple.
    You will need to contact Apple directly and continue to seek help from them as no one here can help with your issue
    http://www.apple.com/contact/
    Sorry... and good luck!

  • Office 2013 Pro-Plus installation problem on Windows 8

    Downloaded OfficeProfessionalPlus_x86_en-us.img from TechNet on my brand new Dell PC.
    When double clicked, Windows complains 'Sorry, There was a problem mounting the file".
    Used 7Zip and saw a Setup.exe
    When I ran Setup.exe it complains "The specified module could not be found"
    I have removed Office 2010.
    - Jayawanth

    Hi
    We recommend you download it from the website and extract it again to make sure your source install is complete.
    Run setup.exe as administrator then try the install.
    If the issue persists, refer to the article on General troubleshooting for installing Office 2013 and Office 365:
    http://support.microsoft.com/kb/2822317
    Regards
    Tylor Wang
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Trial Version of Acrobat 9 Pro Extended Installation Problems

    I just downloaded a trail version of Acrobat 9 Pro Extended. We are trying to install this version on Windows Vista Enterprise which is being vertualized with Parallels version 3.0 on a Mac O/S Leopard. We get the following errors; Main_File_Version Error, Product_Registry_Parant Error, and Product_Registry_Key Error. Does any know if Acrobat 9 will work in this type of environment?

    I cannot speak for the trial or Vista, but Pro 9 Extended works well
    with XP SP3 under Parallels.
    Mike

  • Acrobat X Pro Upgrade Installation Problem

    I have Acrobat X Standard and have purchased Acrobat X Pro but when I try to install I get the message "Setup has detected that you already have a more functional productinstalled. Setup will now terminate."

    Uninstall it, run the Creative Suite Cleaner Tool try again.
    Mylenium

  • Acrobat 9 Pro re-installation problem

    I have a new PC where I installed Adobe Creative Suite 5 Design Premium. I deactivated the programs on my old machine succesfully and so far InDesign and Photoshop are fine. However, when I installed Acrobat (software is on a separate CD), I get the message "Invalid Serial Number.  This is not a valid serial number.  Please go back and re-enter your serial number". I'ved used the serial number on my License Certificate, it is a separate one, not the same as the one of the Design Premium.

    There is a kb document on this error.
    http://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  • Portal Installation Problem on Sun Solaris

    Hi,
    I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
    What else should I do to check the mistakes because I have installed it twise but no luck.
    Thanks.
    Sandeep

    I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
    OracleiSuitesHTTPServer
    OracleOraHome81TNSListener
    I also tried to start the HTTP server from the command line but got the following error:
    D:\Oracle\iSuites\Apache\Apache>apache
    Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
    AuroraService - directive already in effect for this Server
    If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
    Thanks,
    -Stephanie
    null

  • Oracle VM Server (3.2.3) installation problem on Sun X3-2

    Dear All Experts,
    I  have 2 hard disks and configure as RAID1, than create 2 virtual drives for OS (40GB) and Local Storage Repository (250GB) already.
    During VM Server installation, I saw 3 drives (a, b, c) and I don't know why drive C is created automatically?
    drive A: OS = 40GB, file system: ext3
    drive B: Storage Repository = 250GB, file system: ext3
    drive C: 3GB, file system: vfat
    I have to delete this drive C or not? if delete, it affect to system or not? how to delete it?
    your help is so appropriate.
    Thanks and regards,
    Heng

    Dear All,
    Any update for this issue?
    I have 2 virtual drives when I install OVM Server 3.2.3, I see 3 drives is C one more. Please check and give advice as below:
    root@ovmserver ~]# fdisk -l | more
    Disk /dev/sda: 42.9 GB, 42949672960 bytes
    255 heads, 63 sectors/track, 5221 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1        1305    10482381   83  Linux
    /dev/sda2            1306        5221    31455270   82  Linux swap / Solaris
    Disk /dev/sdb: 256.0 GB, 256049676288 bytes
    255 heads, 63 sectors/track, 31129 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
       Device Boot      Start         End      Blocks   Id  System
    Disk /dev/sdc: 3880 MB, 3880452096 bytes
    120 heads, 62 sectors/track, 1018 cylinders
    Units = cylinders of 7440 * 512 = 3809280 bytes
       Device Boot      Start         End      Blocks   Id  System
    Disk /dev/dm-0: 256.0 GB, 256049676288 bytes
    255 heads, 63 sectors/track, 31129 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
         Device Boot      Start         End      Blocks   Id 
    Please kindly give advice for this. your help is so appreciate.
    Thanks and regards,
    Heng

  • Which kernel module for Intel PRO/100 S Desktop Adapt

    Which kernel module I should load for support LAN Card "Intel® PRO/100 S Desktop Adapter" Board ID "751767-004" , Based on Controller 82550

    Finded in /usr/src/linux-2.6.5/drivers/net/Kconfig
    config E100
        tristate "Intel(R) PRO/100+ support"
        depends on NET_PCI && PCI
        select MII
        ---help---
          This driver supports Intel(R) PRO/100 family of adapters, which
          includes:
          Controller  Adapter Name                       Board IDs
          82558       PRO/100+ PCI Adapter               668081-xxx,
          689661-xxx
          82558       PRO/100+ Management Adapter        691334-xxx,
          701738-xxx,
          721383-xxx
          82558       PRO/100+ Dual Port Server Adapter  714303-xxx,
          711269-xxx,
          A28276-xxx
          82558       PRO/100+ PCI Server Adapter        710550-xxx
          82550       PRO/100 S Server Adapter           752438-xxx
          82559                                          A56831-xxx,
          A10563-xxx,
          A12171-xxx,
          A12321-xxx,
          A12320-xxx,
          A12170-xxx
          748568-xxx
          748565-xxx
          82550       PRO/100 S Desktop Adapter          751767-xxx
          82559                                          748592-xxx,
          A12167-xxx,
          A12318-xxx,
          A12317-xxx,
          A12165-xxx,
          748569-xxx
          82559       PRO/100+ Server Adapter            729757-xxx
          82559       PRO/100 S Management Adapter       748566-xxx,
          748564-xxx
          82550       PRO/100 S Dual Port Server Adapter A56831-xxx
          82551       PRO/100 M Desktop Adapter          A80897-xxx
          PRO/100 S Advanced Management Adapter
          747842-xxx,
          745171-xxx
          CNR         PRO/100 VE Desktop Adapter         A10386-xxx,
          A10725-xxx,
          A23801-xxx,
          A19716-xxx
          PRO/100 VM Desktop Adapter         A14323-xxx,
          A19725-xxx,
          A23801-xxx,
          A22220-xxx,
          A23796-xxx
          To verify that your adapter is supported, find the board ID number
          on the adapter. Look for a label that has a barcode and a number
          in the format 123456-001 (six digits hyphen three digits). Match
          this to the list of numbers above.
          For more information on how to identify your adapter, go to the
          Adapter & Driver ID Guide at:
          http://support.intel.com/support/networ … /21397.htm
          For the latest Intel PRO/100 network driver for Linux, see:
          http://appsr.intel.com/scripts-df/support_intel.asp
          More specific information on configuring the driver is in
          <file:Documentation/networking/e100.txt>.
          To compile this driver as a module, choose M here and read
          <file:Documentation/networking/net-modules.txt>.  The module
          will be called e100.

  • How to configure Intel Pro/100 ethernet in PXI-8176 controller for RedHat Linux kickstart installation?

    I have trouble configuring the Intel Pro/100 ethernet for the PXI-8176 controller during the kickstart installation. Did anyone have better luck?

    Not with Linux but...
    I had trouble setting it up for RT.
    There is an issue with the chipsets used and the firmware of the 8176 when sizing the bus.
    There was a KB article.
    NI support should be able to chase down your details for you.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for