Ethernet interface down when make entry in autopush file

Hi,
my kernel STREAMS module is working fine when i push it just above ethernet interface through ifconfig cmd, but when i make its entry in autopush file as: iprbo -1 0 simod
then during boot ethernet interface iprb0 is not getting up & even system is getting crashed?
how i can sort out this prob ?

Hi Prakash
Chech if the host name entry in maintained on DNS server. DNS server is responsible to resolve your host-name to IP setting.
refer this link - http://forums.techarena.in/server-dns/905529.htm
Regards
Mitesh Parekh

Similar Messages

Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for months with no problems.

Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Adobe Photoshop CC shuts down when trying to open a file or save it!

Adobe Photoshop CC shuts down when trying to open a file or save it. I'm running windows 7 professional and have tried unistalling/reinstalling preferences but does not work. I will list the events logs for help in seeing what I need to do to make this work. Please help!
This is the first of 2 errors listed associated with photoshop cc.
Log Name: Application
Source:        .NET Runtime
Date: 10/12/2014 9:52:29 AM
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer: Owner-PC
Description:
Application: Photoshop.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
   at P1.WICCODEC.CODEC.ImageCoreBasedDecoder..ctor(System.Runtime.InteropServices.ComTypes.ISt ream, System.String)
   at P1.WICCODEC.CODEC.WICBitmapDecoder.CreateICDecoder(System.Runtime.InteropServices.ComType s.IStream)
   at P1.WICCODEC.CODEC.WICBitmapDecoder.QueryCapability(System.Runtime.InteropServices.ComType s.IStream, UInt32 ByRef)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-12T14:52:29.000000000Z" />
<EventRecordID>62867</EventRecordID>
<Channel>Application</Channel>
<Computer>Owner-PC</Computer>
    <Security />
</System>
<EventData>
<Data>Application: Photoshop.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
   at P1.WICCODEC.CODEC.ImageCoreBasedDecoder..ctor(System.Runtime.InteropServices.ComTypes.ISt ream, System.String)
   at P1.WICCODEC.CODEC.WICBitmapDecoder.CreateICDecoder(System.Runtime.InteropServices.ComType s.IStream)
   at P1.WICCODEC.CODEC.WICBitmapDecoder.QueryCapability(System.Runtime.InteropServices.ComType s.IStream, UInt32 ByRef)
</Data>
</EventData>
</Event>
Second Error
Log Name: Application
Source: Application Error
Date: 10/12/2014 9:52:30 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer: Owner-PC
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a1d7
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x531599f6
Exception code: 0xe0434352
Fault offset: 0x0000812f
Faulting process id: 0x16c8
Faulting application start time: 0x01cfe62c123b9d8e
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC\Photoshop.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 633cd65f-521f-11e4-a63f-001cc0725d07
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-12T14:52:30.000000000Z" />
<EventRecordID>62868</EventRecordID>
<Channel>Application</Channel>
<Computer>Owner-PC</Computer>
    <Security />
</System>
<EventData>
<Data>Photoshop.exe</Data>
<Data>14.2.1.570</Data>
    <Data>52f4a1d7</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>531599f6</Data>
<Data>e0434352</Data>
<Data>0000812f</Data>
<Data>16c8</Data>
<Data>01cfe62c123b9d8e</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CC\Photoshop.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>633cd65f-521f-11e4-a63f-001cc0725d07</Data>
</EventData>
</Event>

The first error has nothing to do with Photoshop - that's some .NET application.
The second error is most likely connected to a third party plugin or driver.
And you're running Photoshop CC (14.x) instead of the current Photoshop CC 2014 (15.x).

How to keep the ethernet interface up when removing the cable?

On 10.6 I notice that if the ethernet cable is unplugged, it will not bring the interface up. As a result, I cannot test my server without the interface attached. For instance, if en0 is 192.168.2.10 and a web server is running, the local DNS translates the web servers domain to 192.168.2.10, I cannot reach my own web server as there is no route to host. This is probably energy conservation issue, but it makes life rather unpleasant, because if the interface goes down when there is a cable problem, I also get all sorts of internal problems because of the missing host (e.g. a virtual machine looking for a DNS server on 192.168.2.10 which is suddenly unreachable).
This was not the case with 10.5 Server and I think the last time I had this kind of behaviour was with my NeXT cube where the en0 interface would not come up without a cable attached to it and a switch.
So, is there a way I can force OS X 10.6 to bring up the en0 interface on 192.168.2.10 no matter what?

I have made my DNS reachable at all times by using 127.0.0.1 for the "DNS to use" in my ethernet settings in System Preferences.
Using localhost is no go, as I am running three separate IP-addresses (three en intrerfaces) on my single RJ-45. This way, I can let several web sites for different domains listen to different IP-addresses. Furthermore, I can make sure on the router's NAT that for instance only one of those gets the port 443 traffic and that one does not get port 80 and the other way around.
The solution I have now is a cable attached to a switch attached to nothing else. But it is inelegant, I'd rather know how to make the interfaces come up regardless what is attached to the RJ-45.

Ethernet interface errors when connecting to Dell Power Connect 5316M

Customer is connecting an Ethernet port off a CSS11502 to a port on a Dell PowerConnect 5316M on software version 1.0.0.24. On the CSS11502 there are FCS errors and Ethernet errors on the Dell switch. Has anyone seen incompatibility issues with CSS devices and Dell switches?

Hi,
have you checked the auto-negotiation settings on both? maybe they don't get the speed settings right and one is in half-duplex.
-alex

Reader 9.2 shuts down when trying to print PDF files

When trying to print (MS XP) PDF file" Data Execution" error message shuts down Reader. I have tried selecting/deselecting DEP from MS "performance" options and still get the same error message.
Any fixes for this problem?

Hi Masroor ,
Thank you very much for getting back to me with the "fix".
I removed 9.2 and installed 8.3 and can now print PDF files from Reader 8.3 with no problems.
Please let me know when the issues with 9.2/ MS are resolved. (I have checked and printer drivers are updated).
Thanks for your help.

Itunes shuts down when clicking on "add a file"

When I click on File/ Add file to Library Itunes shuts down (Message: "Itunes has stopped working"). However, adding a folder to the library works. I have the latest version 12.1.1. Any suggestions?

Hey chaimoy,
It seems like you may be experiencing an unexpected quit from iTunes when importing a file into the iTunes library. I have an article for you that addresses this circumstance, and it can be found below:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Leave plugged in Ethernet interface disabled (down) [solved]

Is it possible to keep a plugged in Ethernet interface down by default at boot? I have a USB Ethernet adapter I'd like to keep down until needed. Despite not having an IP, it is automatically activated and up at boot up (it is a spanned port).
The ipv6 stack is in the kernel but not used for interfaces, udev renames the device, and nothing is configured for it in NetworkManager (although have tried to manage it this way to avail). dhcp shouldn't be a problem, unless I'm missing something that is pre-configured by default?
The only solution I can think of is to blacklist the module, which would allow me to probe it when needed to bring it up (there is also the physical side of doing this as well). The only drawback is these aren't the most efficient ways to manage an interface.
Any suggestions are appreciated.
Last edited by jskier (2014-03-27 19:49:44)

Standard NICs are kept down unless configured (eg. with netctl, etc). My net2 is plugged into a switch:
$ ip a s
3: net2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:5a:73:94:a2 brd ff:ff:ff:ff:ff:ff

Second ethernet interface ni a cache engine

I'm trying to configure the second ethernet interface
in a CE 505, version 2.51
a "show hardware" command shows 2 ethernet interfaces, but when I go into configuration
mode and try to set any parameter in the second
interface, I get the error:
"configure interface 1 denied"
Thanks for any clue.

Hi
On a CE-505 you cannot use the second interface. This is a limitaion of the software on the device. Only if you had a content engine running version 3.x or 4.x can you use the second interface.
Best Regards,
Mark

Nexus 5000 - Odd Ethernet interface behavior (link down inactive)

Hi Guys,
This would sound really trivial but it is very odd behavior.
- We have a server connected to a 2, Nexus 5000s (for resiliancy)
- When there is no config on the ethernet interfaces whatsoever, the ethernet interface is UP / UP, there is minimal amount of traffic on the link etc. E.g.
Ethernet1/16 is up
Hardware: 1000/10000 Ethernet, address: 000d.ece7.85d7 (bia 000d.ece7.85d7)
Description: shipley-p1.its RK14/A13
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
full-duplex, 10 Gb/s, media type is 1/10g
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
Last link flapped 00:00:07
Last clearing of "show interface" counters 05:42:32
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 96 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 8 bps, 0 pps
RX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 input packets 0 bytes
    0 jumbo packets 0 storm suppression packets
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    0 unicast packets 163 multicast packets 0 broadcast packets
    163 output packets 15883 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble
    0 Tx pause
1 interface resets
- As soon as I configure the link to be an access port, the link goes down, flagging "inactivity" E.g.
sh int e1/16
Ethernet1/16 is down (inactive)
Hardware: 1000/10000 Ethernet, address: 000d.ece7.85d7 (bia 000d.ece7.85d7)
Description: shipley-p1.its RK14/A13
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
auto-duplex, 10 Gb/s, media type is 1/10g
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
Last link flapped 05:38:03
Last clearing of "show interface" counters 05:41:33
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 input packets 0 bytes
    0 jumbo packets 0 storm suppression packets
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    0 unicast packets 146 multicast packets 0 broadcast packets
    146 output packets 13083 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble
    0 Tx pause
0 interface resets
- This behavior is seen on both 5Ks
- I've tried using a different set of ports, changed SFPs, and fibre cabling to no avail
- I can't seem to understand this behavior?! In that, why would configuring the port cause the link to go down?
- If anyone has experience this before, or could shed some light on this behavior, it would be appreciated.
sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS:      version 1.2.0
loader:    version N/A
kickstart: version 4.2(1)N1(1)
system:    version 4.2(1)N1(1)
power-seq: version v1.2
BIOS compile time:       06/19/08
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.2.1.N1.1.bin
kickstart compile time: 4/29/2010 19:00:00 [04/30/2010 02:38:04]
system image file is:    bootflash:/n5000-uk9.4.2.1.N1.1.bin
system compile time:     4/29/2010 19:00:00 [04/30/2010 03:51:47]
thanks
Sheldon

I had identical issue
Two interfaces on two different FEXes were INACTIVE. I have two Nexus 5596 in vPC and A/A FEXes.
I also use config-sync feature.
Very same configuration was applied to other ports on other FEXes and they were working with no problems.
interface Ethernet119/1/1
inherit port-profile PP-Exchange2003
I checked VLAN status associated with this profile and it was active (of course it was, other ports were ok).
I solved it by removing port profile from this port and re-applied it... voila, port changed state to up!
Very very strange.

ICal shuts down when I edit an entry, without taking the edit

Since installing Leopard on my Macbook, I have had a whole list of problems. Here's one: iCal shuts down when I edit an entry. In particular, I'm trying to remove an alarm from a recurring event. I click "none" and then before I can click "done" the whole program shuts down.
Help!

I am still using OS X 10.4.10. Since this weekend I ma unable to do anything with ICAL. As soon as I try to make a change, it crashes. I have tried reinstalling, etc. Any suggestions?

Ethernet OAM CFM to take interface down

Hi,
I'd like to use CFM to take a link down when the remote side is not responding any more as the link is disrupted.
Platform is CRS-1 w. IOS-XR 4.1:
Here my configuration:
ethernet cfm
domain md0 level 4 id string crs_196_P2
service ma0 down-meps
   continuity-check interval 100ms loss-threshold 3
   efd
interface TenGigE0/2/0/2
description ->t1600_195_P3, xe-1/0/2
mtu 4474
service-policy output VF-QOS
ipv4 address 172.20.23.1 255.255.255.252
load-interval 30
ethernet cfm
mep domain md0 service isis-eoam mep-id 1
I get an error message that there is an MAID mismatch and the link is being taken down:
sh eth cfm lo meps
Defects (from at least one peer MEP):
A - AIS received                I - Wrong interval
R - Remote Defect received      V - Wrong level
L - Loop (our MAC received)     T - Timed out
C - Config (our ID received)    M - Missing (cross-check)
X - Cross-connect (wrong MAID) U - Unexpected (cross-check)
P - Peer port down
Domain md0 (level 4), Service ma0
   ID Interface (State)        Dir MEPs/Err RD Defects AIS
    1 Te0/2/0/2 (Down)         Dn     1/1   Y X
When I do a debug ethernet cfm packets I see the following messages that do not indicate an error to me:
LC/0/2/CPU0:Jul 7 23:55:26.424 : cfmd[138]: PKT-RX: IFH TenGigE0/2/0/2 ingress: CCM packet received at level 4 for domain md0, service ma0: length 75, source MAC 28c0.da4e.9900, destination MAC 0180.c200.0034: Packet processed successfully
LC/0/2/CPU0:Jul 7 23:55:26.480 : cfmd[138]: PKT-TX: IFH TenGigE0/2/0/2 egress: CCM packet sent at level 4 for domain md0, service ma0: length 98, source MAC 0007.0e50.95c5, destination MAC 0180.c200.0034
LC/0/2/CPU0:Jul 7 23:55:26.524 : cfmd[138]: PKT-RX: IFH TenGigE0/2/0/2 ingress: CCM packet received at level 4 for domain md0, service ma0: length 75, source MAC 28c0.da4e.9900, destination MAC 0180.c200.0034: Packet processed successfully
From the documentation I see that the MAID is made up of the MDID and the SMAN, but from the debug above they do seem to match.
Any ideas on what I am missing here?
TIA

Wrong Section, You should be asking it in IOS-XR section.

Vfc interface down until "shut/no shut" on Ethernet interface(s)

Hello, I'm hoping someone out there has had this problem and knows the solution, or can provide some insight as to whether the problem is with the CNA, Host OS, or Nexus. I've not yet posted anything to the Brocade discussion forums about this issue.
I have vfc interfaces that are not coming up naturally; the log states that it fails "waiting for flogi" (see 'google'). The only solution that I've found posted for that problem is to apply the QoS settings for FCoE. Those settings were already applied during the initial configuration of the switch, and I've since double and triple checked them. I've also gone through the Cisco Nexus 5000 Troubleshooting Guide, Troubleshooting FCoE Issues, and everything checks out except a couple of things:
1) The interfaces don't get past the FIP Solicitation stage: They show Triggered Event: [FCOE_MGR_VFC_EV_FIP_SOLICITATION] over and over again.
2) While the troubleshooting guide states that the FCoE vLAN should be STP forwarding on the underlying Ethernet interfaces, it is not. However, I have a working configuration elsewhere (with different make/model CNA hardware and Nexus software revisions) and the FCoE vLAN is not STP forwarding on those underlying Ethernet interfaces either.
The interesting part is that if I do a "shut" then "no shut" on the underlying Ethernet interfaces, after the hosts have completely booted, the vfc interfaces come up and successfully register in the flogi database. At that point everything is functional. If the hosts then reboot, the vfc interfaces fail to come up until I perform the "shut/no shut" on the underlying Ethernet interfaces.
One other noteworthy symptom is that during POST, when the CNA initializes, it displays the error message "Link initialization failed. Disabling BIOS."
Here is a configuration synopsis:
Cisco Nexus 5548UP [Ver. 5.1(3)N2(1)]
Brocade 1020 CNA [Rev. 3.2.1.0]
ESXi vSphere [Ver 5.1], [CNA Driver Rev. 3.2.1.0]
There are two vSANs; A-side and B-side. Each is bound to a unique and dedicated vLAN.
Po1 is the vPC peer-link. The FCoE vLANs are *not* allowed on it.
Po1011 is DB1's vPC port-channel. It is an 802.1q Trunk; the native vLAN (1) and the FCoE vLANs are allowed, among other Ethernet data vLANs.
Po1021 is DB1's vPC port-channel. It is an 802.1q Trunk; the native vLAN (1) and the FCoE vLANs are allowed, among other Ethernet data vLANs.
vfc1011 is DB1's Virtual FC interface. It is a Trunk (mode TF), allowing the A-side vSAN only. It is in the vSAN membership database.
vfc1021 is DB2's Virtual FC interface. It is a Trunk (mode TF), allowing the B-side vSAN only. It is in the vSAN membership database.
EDIT: The Port-Channels are LACP.
Thanks for your time.
Message was edited by: Michael Hertrick

I agree that the more distance you can put between the fabrics ever converging into one, the better off you are. You don't want faults on one SAN to interrupt and cause faults on your redundant SAN.
Nevertheless, the aforementioned configuration does not converge the two vSANs.
The host does not bridge between the two adapters, nor do the switches bridge between the two. Remember, even though you bind the vfc to the port-channel in the configuration, the vfc is really bound only to the Ethernet interface on the local switch and is not participating in the port-channel at all. There is no way, with that configuration as-is, for SAN A traffic to land on SAN B. A series of a few mis-configurations would be required for the SAN segmentation to be eroded.
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/configuration_guide_c07-543563.html
See sections "Configuration Parameters That Must Be Identical" and "Configuration Parameters That Should Be Identical"
Under "must" there is:
Enable or disable state per VLAN"
Under "should" there is:
Spanning Tree Protocol interface settings:
VLANs (Rapid Per-VLAN Spanning Tree Plus [PVST+])
Would you mind pointing out in the document you linked where Cisco recommends that the allowed vLANs on each side of the vPC should be different? I didn't exactly find that. What I did see was that they have vlan 101 and 102 allowed on both port-channel11 and port-channel12 in their example. vsan 101 is bound to vlan 101, vsan 102 is bound to vlan 102.
Kind Regards.

How to make a button stay down when I click on it in CSS nav bar.

So I have created a horizontal navigation bar, I use the CSS
Sprites/Pixy method to get the hover working with the same image as
the link/in active stage of the buttons.
Now how do I make the button stay down when someone click on
them?
These are the codes for the nav bar.
#nav{
width: 780px;
list-style: none;
margin-top: 0;
margin-right: auto;
margin-bottom: 0;
margin-left: auto;
padding: 0;
height: 40px;
#nav li{
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
font-weight: bold;
float: left;
padding: 0;
#nav a{
width: 125px;
display: block;
color: #000000;
text-decoration: none;
text-align: center;
background-image: url(ZITTO_IMAGES/button_set1a.jpg);
background-repeat: no-repeat;
background-position: center 2px;
padding-top: 14px;
padding-bottom: 10px;
background-color: #000000;
#link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
#nav a:hover{
background-image: url(ZITTO_IMAGES/button_set1a.jpg);
background-repeat: no-repeat;
background-position: center -36px;
color: #FFFFFF;
width: 125px;
padding-top: 14px;
padding-bottom: 10px;
background-color: #000000;
Everything works so far, the hover works when you roll the
mouse but when you click the button goes right back.
How can I make it stay down and then go back to normal when
you click on another link/button?
Thanks very much.
Patrick

Read my suggestion again. You are missing a critical point. I
show you
exactly where to put the stylesheet. And it doesn't matter
how many
stylesheets you have on a page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Webethics" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Change this -
>
> #nav a{
> width: 125px;
> display: block;
> color: #000000;
> text-decoration: none;
> text-align: center;
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center 2px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
>
>
> #nav a:hover{
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center -36px;
> color: #FFFFFF;
> width: 125px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> to this -
>
> #nav a{
> width: 125px;
> display: block;
> color: #000000;
> text-decoration: none;
> text-align: center;
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center 2px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
>
>
> #nav a:hover{
> background-position: center -36px;
> color: #FFFFFF;
> }
>
> Then on each individual page, change this -
>
> </head>
>
> to this -
>
> <style type="text/css">
> #nav a#link4 {
> background-position:center - 36px;
> }
> </style>
> </head>
>
> (for link4, for example)
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Webethics" <[email protected]> wrote
in message
> news:[email protected]...
> >
quote:
Originally posted by:
Newsgroup User
> > When they click on a button, do they go to another
page? And is each
> > button
> > uniquely identified?
> >
> > If so, then put a little stylesheet on each such
page that sets the
> > particular button to the down sprite settings,
e.g.,
> >
> > a#link6 { downspritevalues }
> >
> > --
> > Murray --- ICQ 71997575
> > Adobe Community Expert
> >
> >
> > This is the link to the page.
> >
http://www.patrickjudson.com/zitto_web1d.html
> > What state do I use to get this effect? The active
or the visited?
> >
> > I want the buttons to remain down when click or
even better, how do I
> > get
> > the
> > welcome button to appear down when a person visits
the page to show them
> > they
> > are at the home page.
> >
> > Thanks so much. Patrick
> >
> >
> >
>
>
>
> Hey! Murray, thanks very much for the efforts. However
I'm still confused
> as
> to where to insert the individual styles on each page.
>
> The pages already have a style sheet, in fact they all
share the same
> style
> sheet. The following codes below is what you instructed
but I'm confused
> as to
> where to insert them since the page already has a head
opening and closing
> as
> well as a style opening and closing tags. Can you please
add the codes you
> instructed so I can see where they go and how to
implement them?
>
> Thanks - Patrick
>
>
> Then on each individual page, change this -
>
> </head>
>
> to this -
>
> <style type="text/css">
> #nav a#link4 {
> background-position:center - 36px;
> }
> </style>
> </head>
>
> (for link4, for example)
>
>
>
>

IMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath.

I've got an iMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath. Use Mavericks, installed Mavericks again on clean system. Problem still exist. What now?

The 2009 iMaccan take 8 GB ram, while it should run ok with 4 it might be a rather inexpensive test to put in 8 and see if that clears up the problems. Mavericks is going to use almost 2 GB itself so, unless you are opening a lot of applications, you should get by with 4 GB. But I would go for 8 and see how it does.

Ethernet interface down when make entry in autopush file

Similar Messages

Maybe you are looking for