Ethernet interface errors when connecting to Dell Power Connect 5316M

Customer is connecting an Ethernet port off a CSS11502 to a port on a Dell PowerConnect 5316M on software version 1.0.0.24. On the CSS11502 there are FCS errors and Ethernet errors on the Dell switch. Has anyone seen incompatibility issues with CSS devices and Dell switches?

Hi,
have you checked the auto-negotiation settings on both? maybe they don't get the speed settings right and one is in half-duplex.
-alex

Similar Messages

Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

Hello,
We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive).
But when open DeviceNet interface, it happen the error.
We can't find the solution and hope to find help from you.
The basic sequence in TestStand is:
1). Call "Open DeviceNet Interface.vi" to open interface and creat interface object.
Interface(master) setting: interface name=dnet0, MAC ID=0, baudrate=125000bps
2). Call "Open DeviceNet IO.vi" to creat DeviceNet IO object.
Device(slave) setting: MAC ID=63
3). Call "Operate DeviceNet Interface.vi" and operation code=start
4). Call "Wait For State.vi"
5). Call "Read DeviceNet IO.vi" to read data from IO object
6). Call "Close Object.vi" to close IO object handle
7). Call "Close Object.vi" to close interface object handle
Remark, these DeviceNet VIs locates at "C:\Program Files\National Instruments\LabVIEW 2012\vi.lib\DeviceNet\VIAPI".
First time to run sequece in TestStand, it can pass to run step 1) to open DeviceNet interface.
But once there is some error with these steps, and it will happen "Open DeviceNet Interface" error (error code=0xBFF62006) when run these steps again.
Then even use LabVIEW DeviceNet example to test, and it happen the same error except restart computer.
The DeviceNet example locates at "C:\Program Files\National Instruments\LabVIEW 2012\examples\NI-Industrial Communications for DeviceNet\Basic Examples\PXI & PCI\MixedCommunication.vi".
Some information more:
PC operate system: Windows XP SP3
LabVIEW version: 2012 SP1
TestStand version: 2012 SP1
PCI 8532 driver version: 2.3.0
Other installed PCI board: PCI 8531 CANOpen

The following errors may be resolved by resetting the CAN, DeviceNET or LIN device:
Error -1074388986 occurred at ...
NI-CAN: (Hex 0xBFF62006) The object is already open in another application. Solutions: Ensure that only one application at a time uses an object , and that you close all objects prior to exiting your application (don't use LabVIEW toolbar's Abort button).
Error -1074388969 occurred at ...
NI-CAN: (Hex 0xBFF62017) This attribute's value must be provided prior to the Open. Solutions: Set the attribute using the Config function before the Open, and do not set the attribute at any later time; Do not configure multiple CAN Objects for the same ID.
SO,you should reset the DeviceNet.
And another similar issue can explain some points of your problem http://digital.ni.com/public.nsf/allkb/7D9383E9BEAD0B21862571640002F687?OpenDocument

Get 9672 error when adding an Epson 7800 connected to an aiport express

I get a 9672 error when I try to add our epson 7800. It is a rendevous printer connected to an airport express. The aiport express is an extension of our aiport network base which is an airport extream. I am trying to add it to a G5 with osx 10.3.9.
I can add it to our mac minis that run 10.4 with no problem.
I tried deleting the driver and reinstalling the latest driver from epson and deleting the printer preferences.
It shows up as a rendevous printer but when I try and add it I get a 9672 error.

The problem seemed to be that we were printing to two epson Printers, a cx5400 and a 7800.
I repaired permissions.
Then I deleted the epson print drivers by putting the epson folder which is in the Library folder in the trash. Next I deleted the printer preferences by putting all the apple.print files in the users, home folder, library, preferenced folder in the trash and rebooted.
I had to reinstall the printer driver for the 5400 first, It requires a reboot, then reinstall the 7800 print driver. Then I connected the 7800 from my g5 via usb, added the printer and printed. Next I put the put the 7800 on the Airport Express, added the printer and printed. I then printed to the 5400 and deleted the printer I defined to print via usb from the G5.
Now it works. I tried to install the drivers and add the printers in many different orders and it seemed to be very important that the order above be followed. If I didn't I would get the 9672 error when I tried to add the 7800 or a communications error when I tried to print to the 7800.
Support at epson let me know how to deleted the printer driver.

Error when I try to "test connection " in JCO destination

com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
we made entry in services file, the logon groups are existing,
is there any solution to rectify this error
Thanks in Advance,
Murali.M

Hi
Please check if you are able to login to SAP R/3 first. Second when you are creating the
JCO connections ensure that you give the password to connect to SAP in capital letters. There was a problem in SP11. Just check if that is the problem.
Ensure that you have the following completed.
1. You have added the entry in the services file and restarted your SLD
2. In Visual Administrator you have configured the SLD data supplier to point to your SLD.
3. Created the system in SLD with the correct information.
4. Then when you create the JCO connections check if you are giving teh password in caps just for correctness.
Moreover the entires for logon group and System name should be picked up from SLD. You should have configured the system in SLD. just check if it has been done properly. If it is just restart the server just in case.
You should then be able to see the values in the dropdown when you create a JCO connection.
Also remember that WD_MODELDATA_DEST should be Application data and WD_RFC_METADATA_DEST should be Dictionary Data.
If you have done all the steps and still face the error do let me know.
Hope that helps you.
regards
Ravi

Ethernet interface down when make entry in autopush file

Hi,
my kernel STREAMS module is working fine when i push it just above ethernet interface through ifconfig cmd, but when i make its entry in autopush file as: iprbo -1 0 simod
then during boot ethernet interface iprb0 is not getting up & even system is getting crashed?
how i can sort out this prob ?

Hi Prakash
Chech if the host name entry in maintained on DNS server. DNS server is responsible to resolve your host-name to IP setting.
refer this link - http://forums.techarena.in/server-dns/905529.htm
Regards
Mitesh Parekh

Error when there is no network connection

Post Author: Ken B
CA Forum: Deployment
I get the following error when ever the network is disconnected from the server;
error -2147206462 occured in routine displayreport
Dos error
Does anyone have any idea how I can stop that error from happening? (Besides plugging the network cable back in (grin) )

from where you downloaded ipsw file?

Error when creating a new JMS connection factory in GlassFish V3 b57

When I use the admin console and try to create a new JMS connection factory in GlassFish V3 b57, the operation fails with the error message
An error has occurred: Can't find ConfigModel.Property for attr -connection-validation-required on interface com.sun.enterprise.config.serverbeans.ConnectorConnectionPool
Should I better report this in the GlassFish news forum (http://forums.java.net/jive/forum.jspa?forumID=56&start=0)?
p.s. I launch the admin console from within NetBeans 6.7.1 (the server started before the IDE). WIth version b 56, creating a JMS connection factory worked fine.
Best regards,
Michael Justin

This bug does not apear in the nightly build (b58) now so everything looks fine again.
Greetings,
Michael

NSX Lab on Workstation 11 - Nested ESX crashes with unrecoverable error when trying to test VTEP connectivity with MTU 1500

I'm trying to install and configure NSX 6.1.2 / ESX 5.5 in a nested environment using VMware Workstation lastest bits "VMware-workstation-full-11.1.0-2496824"
I've configured the MTU on the virtual adapter (VMNet1) used by the VXLAN transport network to 9000 bytes.
C:\Users\admin>netsh int ipv4 show int
Idx     Met         MTU          State                Name
1          50 4294967295 connected     Loopback Pseudo-Interface 1
19          25        1500 connected     Wireless Network Connection 4
16          40        1500 disconnected Bluetooth Network Connection
11           5        1500 disconnected Local Area Connection
20           5        1500 disconnected Wireless Network Connection 5
18           5        1400 disconnected Local Area Connection* 11
31          20        9000 connected     VMware Network Adapter VMnet1
when I test VTEP connectivity between ESXi nested host with MTU > 1500, using the following command,
ping ++netstack=vxlan -d -s 1572 -I vmk2 192.168.192.102
the ESXi crashes with the following error
2015-05-21T11:20:47.180+02:00| vcpu-1| I120: Coredump encountered overflow 10218:10218 (2172 duplicates)
2015-05-21T11:20:48.969+02:00| vcpu-1| I120: Backtrace:
2015-05-21T11:20:48.970+02:00| vcpu-1| I120: backtrace[00] frame 0x0881eb38 IP 0x13f0820de params 0 0xa6 0x64e 0x312d75706376 ??? [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x000310de]
2015-05-21T11:20:48.971+02:00| vcpu-1| I120: backtrace[01] frame 0x0881f460 IP 0x13f068129 params 0x13f78dc30 0x13f890928 0x2ce 0x3fff ??? [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x00017129]
2015-05-21T11:20:48.971+02:00| vcpu-1| I120: backtrace[02] frame 0x0881f8b0 IP 0x13f4498bc params 0x13fb8e840 0x3a63ec0 0x13f050000 0x13fb8e840 opus_decoder_destroy + 0x1dec0c [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x003f88bc]
2015-05-21T11:20:48.972+02:00| vcpu-1| I120: backtrace[03] frame 0x0881f8e0 IP 0x13f6809a2 params 0x161 0x35a59e0 0 0xa36333237 opus_repacketizer_get_nb_frames + 0x163fc2 [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x0062f9a2]
2015-05-21T11:20:48.972+02:00| vcpu-1| I120: backtrace[04] frame 0x0881f920 IP 0x13f6b8229 params 0x258 0 0 0 opus_repacketizer_get_nb_frames + 0x19b849 [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x00667229]
2015-05-21T11:20:48.973+02:00| vcpu-1| I120: backtrace[05] frame 0x0881faa0 IP 0x13f680d3c params 0x13f809d60 0x13f7c7374 0x5 0x13fd65da0 opus_repacketizer_get_nb_frames + 0x16435c [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x0062fd3c]
2015-05-21T11:20:48.973+02:00| vcpu-1| I120: backtrace[06] frame 0x0881fb00 IP 0x13f20c736 params 0 0 0 0 ??? [C:\Program Files (x86)\VMware\VMware Workstation\x64\vmware-vmx.exe base 0x13f050000 0x0001:0x001bb736]
2015-05-21T11:20:48.976+02:00| vcpu-1| I120: backtrace[07] frame 0x0881fb08 IP 0x76ee59cd params 0 0 0 0 BaseThreadInitThunk + 0x000d [C:\Windows\system32\kernel32.dll base 0x76ed0000 0x0001:0x000149cd]
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: backtrace[08] frame 0x0881fb38 IP 0x7701b891 params 0 0 0 0 RtlUserThreadStart + 0x0021 [C:\Windows\SYSTEM32\ntdll.dll base 0x76ff0000 0x0001:0x0002a891]
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: Msg_Post: Error
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: [msg.log.error.unrecoverable] VMware Workstation unrecoverable error: (vcpu-1)
2015-05-21T11:20:48.980+02:00| vcpu-1| I120+ VERIFY d:/build/ob/bora-2496824/bora/devices/vmxnet3/vmxnet3_hosted.c:718
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: [msg.panic.haveLog] A log file is available in "X:\vCACupdate\Capricornus\vmware.log".
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: [msg.panic.requestSupport.withoutLog] You can request support.
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: [msg.panic.requestSupport.vmSupport.windowsOrLinux]
2015-05-21T11:20:48.980+02:00| vcpu-1| I120+ To collect data to submit to VMware support, choose "Collect Support Data" from the Help menu.
2015-05-21T11:20:48.980+02:00| vcpu-1| I120+ You can also run the "vm-support" script in the Workstation folder directly.
2015-05-21T11:20:48.980+02:00| vcpu-1| I120: [msg.panic.response] We will respond on the basis of your support entitlement.
Any help is appreciated.

One detail:
I use Vcloud from my work, so I changed iPv4 addresses of machines. For example, DC1 192.168.2.101,
Internet names are 192.169.2.101 and so on.
I mean it is fine that IP addresses differ from mentioned in guide

Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas Budrys

Dear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas

Error when extracting data using DB Connect from an Oracle database

Hi All,
We are on BI 3.5 and loading data from a non-SAP (Oracle 10g) database using DB Connect.
I received the following error messages when trying to perform "Check DataSource" using the DB Connect setup in RSA1.
Event with errors RSDL_META_UPLOAD in DataSource
Message no. R8287
Warning Messages;
Message no. RSDL053
Field name ReceiptID contains non-alpha-numeric characters
Field name ActivityDate contains non-alpha-numeric characters
Field name ReceiptDate contains non-alpha-numeric characters
Field name ReceiptLineNumber must have between 000001 and 000016 digits
etc...
Views are created under the owner's user name. I have checked with DB personnel and they confirm that all the authorization and security access privileges have been correctly granted to the views.
We are also able to extract the data by running a sql query statement from the views using SQL Plus
Currently we also have a similar extraction process set up with an Oracle 9 database, which extracts the information without any issues.
Thanks,
Anthony

Hi Mr Loh.
I know that this thread has over a year ago but i was looking for something similar for over 2 weeks ago and i ialways found this thread...I want to share my experience even that maybe you already found the same solution or something similar (i saw that you check your own post as answered):
I made a similar connection from BI 7 SP 18, but in my case was to a Microsoft SQL database 2005. When i "check the datasource" i receive like almost 150 warnings and 1 error and all the warnings and errors are the same ones as you describe above. What i did is create a custom view in the MSSQL database and convert all the column names to uppercase and the column names i limited to 16 characters at most. after doing that all the warnings and the error described disappear and i can view the database content when you made click in the "view content table" button.
I hope that this will help somebody and best regards
Martin Olmos

Error when attempting to create JDBC connection

I'm attempting to create a new JDBC Data Source for a newly installed Weblogic 10.3 installation. I can set up the connection correctly (when I click the Test Configuration button I see "Connection test succeeded"), but when I go to the next step and checkmark the server (exampleServer) to install it to, I get the error and stacktrace provided below.
If I ignore the error and go back to the data sources, I can see it's been added but missing a server. When I try to add the server (exampleServer), it now adds successfully. BUT, if I try to Activate Changes, I get the error:
An error occurred during activation of changes, please see the log for details.
Error Could not perform unpadding: invalid pad byte.
This is a fresh installation running on Vista. Any idea what might be going on??
Thanks,
John
Error opening /com/bea/console/actions/jdbc/datasources/createjdbcdatasource/CreateJDBCDataSource.jpf.
The source of this error is:
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:54)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:990)
at weblogic.j2ee.descriptor.wl.JDBCDriverParamsBeanImpl.getPassword(JDBCDriverParamsBeanImpl.java:331)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.management.jmx.modelmbean.WLSModelMBean.getAttribute(WLSModelMBean.java:525)
at weblogic.management.jmx.modelmbean.WLSModelMBean.setAttribute(WLSModelMBean.java:625)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.setAttribute(DefaultMBeanServerInterceptor.java:762)
at com.sun.jmx.mbeanserver.JmxMBeanServer.setAttribute(JmxMBeanServer.java:699)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:374)
at weblogic.management.mbeanservers.edit.internal.RecordingInterceptor.setAttribute(RecordingInterceptor.java:130)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:374)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:374)
at weblogic.management.mbeanservers.edit.internal.EditLockInterceptor.setAttribute(EditLockInterceptor.java:95)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$14.run(WLSMBeanServerInterceptorBase.java:376)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.setAttribute(WLSMBeanServerInterceptorBase.java:374)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.setAttribute(SecurityInterceptor.java:358)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$8$1.run(AuthenticatedSubjectInterceptor.java:463)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$8.run(AuthenticatedSubjectInterceptor.java:461)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.setAttribute(AuthenticatedSubjectInterceptor.java:456)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.setAttribute(WLSMBeanServer.java:287)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1449)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366)
at javax.management.remote.rmi.RMIConnectionImpl.setAttribute(RMIConnectionImpl.java:683)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
at javax.management.remote.rmi.RMIConnectionImpl_1030_WLStub.setAttribute(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.setAttribute(RMIConnector.java:921)
at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:281)
at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:504)
at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
at $Proxy115.setPassword(Unknown Source)
at com.bea.console.utils.jdbc.JDBCUtils.saveGlobalDataSource(JDBCUtils.java:354)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.save(CreateJDBCDataSource.java:502)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:255)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 58 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor219.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
... 132 more
Caused by: weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:78)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:94)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:87)
... 136 more
Caused by: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at com.rsa.jsafe.JA_PKCS5Padding.a(Unknown Source)
at com.rsa.jsafe.JG_BlockCipher.decryptFinal(Unknown Source)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:68)
... 138 more

I resolved this. The problem is with the existing data source which got it's password encrypted with the earlier version of weblogic and hence it causing the padding problem. It can be resolved by deleting the existing entries of the datasource in the config.xml and create them manually. Later bring up the server.

How to keep the ethernet interface up when removing the cable?

On 10.6 I notice that if the ethernet cable is unplugged, it will not bring the interface up. As a result, I cannot test my server without the interface attached. For instance, if en0 is 192.168.2.10 and a web server is running, the local DNS translates the web servers domain to 192.168.2.10, I cannot reach my own web server as there is no route to host. This is probably energy conservation issue, but it makes life rather unpleasant, because if the interface goes down when there is a cable problem, I also get all sorts of internal problems because of the missing host (e.g. a virtual machine looking for a DNS server on 192.168.2.10 which is suddenly unreachable).
This was not the case with 10.5 Server and I think the last time I had this kind of behaviour was with my NeXT cube where the en0 interface would not come up without a cable attached to it and a switch.
So, is there a way I can force OS X 10.6 to bring up the en0 interface on 192.168.2.10 no matter what?

I have made my DNS reachable at all times by using 127.0.0.1 for the "DNS to use" in my ethernet settings in System Preferences.
Using localhost is no go, as I am running three separate IP-addresses (three en intrerfaces) on my single RJ-45. This way, I can let several web sites for different domains listen to different IP-addresses. Furthermore, I can make sure on the router's NAT that for instance only one of those gets the port 443 traffic and that one does not get port 80 and the other way around.
The solution I have now is a cable attached to a switch attached to nothing else. But it is inelegant, I'd rather know how to make the interfaces come up regardless what is attached to the RJ-45.

MB: Won't sleep when lid closed and power connected.

Upgraded to Lion a few days ago and everything seems to be working great besides one thing:
When I close the lid on my Macbook (mid 2009) and the power is connected, the light remains on and the computer won't sleep. When i lift the lid everything is how I left it with no blink of the screen as it fires back up. However, when the power is disconnected, the computer sleeps fine when the lid is closed.
How can this be solved?
Thanks!!

OK, think I found my problem.
I had to send my laptop in for repair due to a faulty screen. When I got it back it all looked OK so the first thing I did was install Lion. Then I noticed the sleep issue so assumed it was Lion causing it. I tried the pram, SMC other settings but nothing helped. In the end I reinstalled Snow Leopard, same problem! I tried from bootcamp and same problem, wouldn't sleep when closing the lid.
Doing some googling I found a post where someone has the magnet in the display fail, which is what contacts a switch in the laptop when you close the screen. To test they suggest placing a paper clip on your screen bezel until it sticks to find the magnet, then finding where it locates when closing the screen on the laptop. Then run a small magnet (i used a small fridge one) over this location on the laptop with the screen up. I did this and instantly went to sleep!!! WOOHOO! remove magnet it wakes up, repeat and OK. Close screen without magnet and nothing.
So its gone back in for repair to have the screen replaced again.

Not-identified error when trying to make a connection in CS4

Hello;
When I try to make a Db connection to mysql in DW CS4,using connections,the +-button and fill in the pop up,I am getting the following message:
"a not-identified error has occurred".
The database name,password and all the other information is ok.So I really do not know what is happening.
Is there someone there who has an answer for this problem??
many thanks for the help!

Igorbuitendijk wrote:
The testing serverfolder is:http://www.checksite.eu:2222/public_htmlThe URL prefix is:http://www.checksite.eu:2222/public_html
When I leave out the 2222,Dreamweaver can't make a connection to the server.
I don't know about the use of port 2222, but your testing server definition is completely wrong.
The testing server folder must be a physical path, not a URL. And the URL prefix must be a valid URL. public_html is the name of the web server's document root, it should never be part of a URL.
Judging from the details you have given here, you are using your remote server for testing. In the Testing server section of the site definition, set Access to FTP. The value of Host directory should be what your hosting company tells you to use when logging in. For some hosting companies, you use public_html on its own. Other companies tell you to leave the value blank or to use just /.
The URL prefix is just the URL for the site.

4EA2: Error when saving file while closing connection

After opening a connection, I wrote some SQL, run it and then click disconnect, SQLDEV asks if it should save file, when I click Yes, I get following error. Any idea on how to resolve it? Remember it is trying to save the file, also another thing I noticed that the file it wanted to save (file name automatically generated) was C:\Users\rjamadag\AppData\Local\Temp\worksheet215601548428791866.sql.sql.
For the curious, the directory C:\Users\rjamadag\AppData\Local\Temp does exist and has boatloads of other files.
java.io.FileNotFoundException: C:\Users\rjamadag\AppData\Local\Temp\worksheet215601548428791866.sql (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:146)
at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:764)
at oracle.ide.net.URLFileSystemHelperDecorator.openInputStream(URLFileSystemHelperDecorator.java:291)
at oracle.ideimpl.net.LazyURLFileSystemHelperDecorator.openInputStream(LazyURLFileSystemHelperDecorator.java:364)
at oracle.ide.net.URLFileSystemHelperDecorator.openInputStream(URLFileSystemHelperDecorator.java:291)
at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1368)
at oracle.ide.net.IdeURLFileSystemHelper.openInputStream(IdeURLFileSystemHelper.java:360)
at oracle.ideimpl.net.LazyURLFileSystemHelper.openInputStream(LazyURLFileSystemHelper.java:303)
at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1368)
at oracle.ide.net.URLFileSystem.copy(URLFileSystem.java:384)
at oracle.dbtools.worksheet.editor.OpenWorksheetWizard$NL$3.run(OpenWorksheetWizard.java:158)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:251)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)
at java.awt.EventQueue.access$200(EventQueue.java:103)
at java.awt.EventQueue$3.run(EventQueue.java:694)
at java.awt.EventQueue$3.run(EventQueue.java:692)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)
Thanks in advance for your ideas.

This only happens with Acrobat? Sounds more like a network problem.

Ethernet interface errors when connecting to Dell Power Connect 5316M

Similar Messages

Maybe you are looking for