Ethernet/networking link down // AppleYukon2 - en0 link down

*Massive writing into a Volume located on a NAS // Ethernet/networking link down // AppleYukon2 - en0 link down*
Scenario
Writing a massive data into a volume (sparsebundle) on a NAS (network attached store).
*Problem / Error*
Always during this process the Ethernet link down.
Then the MAC OS X (10.5.6) freeze – no reset, no shutdown and no volume eject – after trying some clicks the spinning wheel comes and only soft reset or hard reset shutdown.
*Technical Info*
Wireless Device: Linksys - WRT54G firmware updated
NAS/External Hard Drive: Iomega - Home Network HD firmware updated
MacBook Pro // Mac OS X (10.5.6) // 2.2 GHz Intel Core 2 Duo // 2 GB
Logs
+LOG 1+
Apr 8 18:56:30 wslyMac /System/Library/CoreServices/backupd[207]: Backup requested by user
Apr 8 18:56:30 wslyMac /System/Library/CoreServices/backupd[207]: Starting standard backup
Apr 8 18:56:36 wslyMac /System/Library/CoreServices/backupd[207]: Mounted network destination using URL: smb://admin@STORAGE-7AB4/TimeMachine
Apr 8 18:56:36 wslyMac /System/Library/CoreServices/backupd[207]: Backup destination mounted at path: /Volumes/TimeMachine-1
Apr 8 18:56:58 wslyMac kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 18:57:07 wslyMac hdiejectd[231]: running
Apr 8 18:57:08 wslyMac kernel[0]: jnl: disk1s2: replay_journal: from: 8088064 to: 15072256 (joffset 0x7d0000)
Apr 8 18:57:25 wslyMac kernel[0]: jnl: disk1s2: journal replay done.
Apr 8 18:57:25 wslyMac fseventsd[37]: event logs in /Volumes/TimeMachine_Backup/.fseventsd out of sync with volume. destroying old logs. (1989 18 2969)
Apr 8 18:57:25 wslyMac /System/Library/CoreServices/backupd[207]: Disk image /Volumes/TimeMachine-1/wslyMac_001b63b30d6b.sparsebundle mounted at: /Volumes/TimeMachine_Backup
Apr 8 18:57:25 wslyMac /System/Library/CoreServices/backupd[207]: Backing up to: /Volumes/TimeMachine_Backup/Backups.backupdb
Apr 8 18:57:29 wslyMac fseventsd[37]: log dir: /Volumes/TimeMachine_Backup/.fseventsd getting new uuid: CBE196F1-1008-4BFB-8D4A-AD9504E68ACF
Apr 8 18:57:59 wslyMac /System/Library/CoreServices/backupd[207]: Event store UUIDs don't match for volume: Macintosh HD
Apr 8 18:58:00 wslyMac /System/Library/CoreServices/backupd[207]: No pre-backup thinning needed: 29.79 GB requested (including padding), 245.17 GB available
Apr 8 19:20:31 wslyMac kernel[0]: AppleYukon2: 00000000,00000017 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:21:35 wslyMac kernel[0]: AppleYukon2: 00000000,0000001b sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:21:53 wslyMac kernel[0]: AppleYukon2: 00000000,0000001e sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:32 wslyMac kernel[0]: AppleYukon2: 00000000,00000004 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:37 wslyMac kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:41 wslyMac kernel[0]: AppleYukon2: 00000000,00000011 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:25:32 wslyMac kernel[0]: smbiodsendall: Timed out waiting on the response for 0x32
Apr 8 19:25:38 wslyMac kernel[0]: AppleYukon2: 00000000,000003e8 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket timedout
Apr 8 19:32:07 localhost kernel[0]: npvhash=4095
+LOG 2+
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Backup requested by user
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Starting standard backup
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Mounted network destination using URL: smb://admin@STORAGE-7AB4/TimeMachine
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Backup destination mounted at path: /Volumes/TimeMachine-1
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Disk image /Volumes/TimeMachine-1/wslyMac_001b63b30d6b.sparsebundle mounted at: /Volumes/TimeMachine_Backup
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Backing up to: /Volumes/TimeMachine_Backup/Backups.backupdb
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Ownership is disabled on the backup destination volume. Enabling.
Apr 8 22:03:26 wslyMac KernelEventAgent[35]: tid 00000000 received unknown event (256)
Apr 8 22:03:27 wslyMac /System/Library/CoreServices/backupd[356]: Event store UUIDs don't match for volume: Macintosh HD
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: Backup content size: 66.6 GB excluded items size: 44.6 GB for volume Macintosh HD
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: No pre-backup thinning needed: 26.46 GB requested (including padding), 249.57 GB available
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: Waiting for index to be ready (909 > 0)
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,0000009c sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,00000008 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,00000004 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:41:20 wslyMac kernel[0]: smbiodreconnect: Reconnected to STORAGE-7AB4
Apr 8 22:41:49: --- last message repeated 1 time ---
Apr 8 22:41:49 wslyMac kernel[0]: disk1s2: 0x48 (UNDEFINED).
Apr 8 22:41:50 wslyMac kernel[0]:
Apr 8 22:41:50: --- last message repeated 1 time ---
Apr 8 22:41:50 wslyMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Apr 8 22:41:50 wslyMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 463360 bytes to the journal!
Apr 8 22:41:50 wslyMac kernel[0]: smbiodreconnect: Reconnected to STORAGE-7AB4
Apr 8 22:41:50 wslyMac fseventsd[39]: disk logger: failed to open output file /Volumes/TimeMachine_Backup/.fseventsd/00000000005a57d8 (Invalid argument). mount point /Volumes/TimeMachine_Backup/.fseventsd
Apr 8 22:41:50 wslyMac kernel[0]: smbfssmb_reopenfile: Reopen 1a with open deny modes failed because the modify time has changed was 1239244850s 0ns now 1239244910s 0ns!
Apr 8 22:41:50 wslyMac kernel[0]: smbfssmb_reopenfile: Warning: pid 360(diskimages-helpe) reopening of 1a failed with error 5
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in ci_ftruncate:ftruncate(53 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1/live.0.indexPostings, 131072) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexGeneral in notify_lowspace:low space for device 234881029 (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)
Apr 8 22:41:50 wslyMac mds[33]: (Error) Volume: LOW DISK SPACE device:234881029
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in ci_ftruncate:ftruncate(54 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1/live.0.indexPostings, 131072) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ci_ftruncate:ftruncate(48 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.indexPostings, 4096) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app/Contents/version.plist to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app/Contents
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app/Contents to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Indexing a file failed. Returned -1132 for: /Applications/Utilities/System Profiler.app, /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Aborting backup because indexing of file failed.
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Stopping backup.
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Copied 1738 files (4.0 GB) from volume Macintosh HD.
Apr 8 22:41:55 wslyMac /System/Library/CoreServices/backupd[356]: Backup canceled.
Apr 8 22:41:56 wslyMac /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[117]: StatusMonitor::volumesChangedCallBack returned -47
Apr 8 22:42:06: --- last message repeated 1 time ---
Apr 8 22:42:06 wslyMac /System/Library/CoreServices/backupd[356]: Failed to eject volume /Volumes/TimeMachine_Backup (FSVolumeRefNum: -113; status: -47; dissenting pid: 0)
Apr 8 22:42:06 wslyMac /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[117]: StatusMonitor::volumesChangedCallBack returned -47
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ci_ftruncate:ftruncate(43 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.indexIds, 32768) error:22
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in openindexfile:ftruncate error: 22, size: 32768, live.0.indexIds
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ContentIndexOpenBulk:Could not open /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.; needs recovery
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1
Apr 8 22:50:21 localhost kernel[0]: npvhash=4095
Apr 8 22:50:17 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Apr 8 22:50:17 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Apr 8 22:50:21 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Apr 8 22:50:21 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Apr 8 22:50:21 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Apr 8 22:50:21 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Apr 8 22:50:21 localhost DirectoryService[11]: Launched version 5.6 (v514.24)
Apr 8 22:50:27 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 8 22:50:22 localhost DirectoryService[11]: Improper shutdown detected
Apr 8 22:50:27 localhost kernel[0]: PAE enabled
Apr 8 22:50:27 localhost kernel[0]: 64 bit mode enabled
Apr 8 22:50:27 localhost kernel[0]: Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
Apr 8 22:50:27 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 8 22:50:27 localhost kernel[0]: vmpagebootstrap: 511374 free pages and 12914 wired pages
Apr 8 22:50:27 localhost kernel[0]: migtable_maxdispl = 79
Apr 8 22:50:22 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Apr 8 22:50:27 localhost kernel[0]: 101 prelinked modules
Apr 8 22:50:27 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Apr 8 22:50:27 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Apr 8 22:50:27 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Apr 8 22:50:27 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Apr 8 22:50:27 localhost kernel[0]: calling mpopolicyinit for mb
Apr 8 22:50:27 localhost kernel[0]: Seatbelt MACF policy initialized
Apr 8 22:50:27 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Apr 8 22:50:27 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 8 22:50:27 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 8 22:50:27 localhost kernel[0]: MAC Framework successfully initialized
Apr 8 22:50:27 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Apr 8 22:50:27 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Apr 8 22:50:27 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Apr 8 22:50:27 localhost kernel[0]: mbinit: done
Apr 8 22:50:27 localhost kernel[0]: Security auditing service present
Apr 8 22:50:27 localhost kernel[0]: BSM auditing present
Apr 8 22:50:27 localhost kernel[0]: rooting via boot-uuid from /chosen: 402D8D77-0836-3192-8A63-554D726141DC
Apr 8 22:50:27 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 8 22:50:27 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 001e52fffe3817fa; max speed s800.
Apr 8 22:50:27 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHY2120BH Media/IOGUIDPartitionScheme/Customer@2
Apr 8 22:50:27 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Apr 8 22:50:27 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 15129600 to: 2979328 (joffset 0x7d01000)
Apr 8 22:50:27 localhost kernel[0]: [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
Apr 8 22:50:27 localhost kernel[0]: [Bluetooth::CSRHIDTransition] transition complete.
Apr 8 22:50:27 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Apr 8 22:50:27 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Apr 8 22:50:27 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Apr 8 22:50:27 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories
Apr 8 22:50:27 localhost kernel[0]: Jettisoning kernel linker.
Apr 8 22:50:27 localhost kernel[0]: Resetting IOCatalogue.
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 1
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 2
Apr 8 22:50:27: --- last message repeated 4 times ---
Apr 8 22:50:27 localhost kernel[0]: Previous Shutdown Cause: 5
Apr 8 22:50:27 localhost kernel[0]: NVDANV50HAL loaded and registered.
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27 localhost kernel[0]: ath_attach: devid 0x24
Apr 8 22:50:27 localhost kernel[0]: Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
Apr 8 22:50:27 localhost kernel[0]: mac 12.10 phy 8.1 radio 12.0
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27: --- last message repeated 1 time ---
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 0
Apr 8 22:50:27 localhost kernel[0]: yukon: Ethernet address 00:1b:63:b3:0d:6b
Apr 8 22:50:27 localhost kernel[0]: AirPort_Athr5424ab: Ethernet address 00:1e:52:71:2c:52
Apr 8 22:50:30 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[16]: starting
Apr 8 22:50:30 localhost fseventsd[38]: event logs in /.fseventsd out of sync with volume. destroying old logs. (3603 22 3778)
Apr 8 22:50:30 localhost rpc.statd[30]: statd.notify - no notifications needed
Apr 8 22:50:31 localhost kernel[0]: AirPort: Link Down on en1
Apr 8 22:50:30 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33]: Login Window Application Started -- Threaded auth
Apr 8 22:50:30 localhost fseventsd[38]: log dir: /.fseventsd getting new uuid: B621E1D8-11D5-49D5-90F5-6E32BEDC8615
Apr 8 22:50:30 localhost bootlog[45]: BOOT_TIME: 1239241808 0
Apr 8 22:50:30 localhost blued[46]: Apple Bluetooth daemon started.
Apr 8 22:50:31 wslyMac configd[14]: setting hostname to "wslyMac.local"
Apr 8 22:50:33 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Apr 8 22:50:35 wslyMac org.ntp.ntpd[26]: Error : nodename nor servname provided, or not known
Apr 8 22:50:35 wslyMac ntpdate[60]: can't find host time.apple.com
Apr 8 22:50:35 wslyMac ntpdate[60]: no servers can be used, exiting
Apr 8 22:50:39 wslyMac kernel[0]: IOHIDSystem: Seize of IOHIDPointing failed.
Apr 8 22:50:39 wslyMac kernel[0]: IOHIDSystem: Seize of IOHIDEventDriver failed.
Apr 8 22:50:39 wslyMac kextd[10]: writing kernel link data to /var/run/mach.sym
Apr 8 22:50:43 wslyMac /usr/sbin/ocspd[75]: starting
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: Starting HP IO Monitor
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: Starting HP Trap Monitor
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
Apr 8 22:50:46 wslyMac loginwindow[33]: Login Window Started Security Agent
Apr 8 22:52:36 wslyMac authorizationhost[95]: MechanismInvoke 0x125de0 retainCount 2
Apr 8 22:52:36 wslyMac SecurityAgent[96]: MechanismInvoke 0x101660 retainCount 1
Apr 8 22:52:37 wslyMac SecurityAgent[96]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Apr 8 22:52:37 wslyMac loginwindow[33]: Login Window - Returned from Security Agent
Apr 8 22:52:37 wslyMac SecurityAgent[96]: MechanismDestroy 0x101660 retainCount 1
Apr 8 22:52:37 wslyMac authorizationhost[95]: MechanismDestroy 0x125de0 retainCount 2
Apr 8 22:52:37 wslyMac loginwindow[33]: USER_PROCESS: 33 console
Apr 8 22:52:37 wslyMac com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[91]): Exited: Terminated
Apr 8 22:52:37 wslyMac com.apple.launchd[108] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Apr 8 22:52:42 wslyMac Dock[118]: _DESCRegisterDockExtraClient failed 268435459
Apr 8 22:52:44 wslyMac /System/Library/CoreServices/coreservicesd[56]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(wsly Hiroyuki Mompean Ueda's Public Folder) returned -14135
Apr 8 22:53:02 wslyMac /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 24]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Apr 8 22:53:02 wslyMac /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 24]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Apr 8 22:54:42 wslyMac kernel[0]: AppleYukon2 - en0 link down
Apr 8 22:54:46 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Apr 8 22:54:52 wslyMac kernel[0]: AppleYukon2 - en0 link down
Apr 8 22:54:53 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0

I've had this problem with this computer as soon as I remember starting to use it.
You should have taken it back to apple immediately.
You need to try a clean install of the OS.. yosemite has known bugs especially with the wireless and if you upgrade installed the OS it can just get worse.
You should do a clone of the hard disk and a Time Machine backup etc.. to make sure you don't lose files.. but a clean install will at least show if it is driver issue or actual faulty hardware. Is the laptop still in warranty / Applecare.. if so return it to apple for checking.

Similar Messages

10.5.8 network throughput and AppleYukon2

I recently detected that my throughput was 25% of what it should be. A speed test confirmed this. I have DSL which is a direct line to the telco office, so it's not cable congestion. I checked the logs and was confronted with a totally saturated log filled with AppleYukon2 kernel extension errors complaining of bad packets received. MII error and CRC.
kernel[0]: AppleYukon2 - bad packet received. length: 1506, packet status bits: CRC error
kernel[0]: AppleYukon2 - bad packet received. length: 36, packet status bits: Broadcasts: MII error
(repeats with different length values and CRC/MII)
These errors saturate the log. They appear more frequently if I try and start a download. The problem was not application specific.
The first thing I checked were my networking cables. Other computers on the same network do not appear to have this same problem.
I installed the recently released security update. This brought my throughput back up to 75% of what it should be. The log is still filling with bad packet errors.
I installed 10.6 on an external drive and updated it to 10.6.1
The throughput is still considerably degraded and the log fills with bad packet errors.
I also tried dumping Extentions.mkext and safe boot with no result
I know that some people that updated to 10.5.8 saw serious problems with the ethernet chip doing a hard reset. A suggested solution was to downgrade the AppleTukon2 kernel extension to the one found in 10.5.6
I would prefer not to do this. Instead I am going to install a fresh install of 10.5.4 on to an external drive and see if the problem still presents. If it's doing it there too, I guess the only thing i have to look at is a hardware failure or the router, but I think this is improbable because other computers on the network are fine and the computer has passed a full HW test.
In the meantime, has anyone else seen this problem on this iMac model or others? Anyone have additional suggestions? Any assistance would be greatly appreciated.

It may be an external device in your case, but I am experiencing the same symptoms when connecting to devices on my local subnet. I am pretty sure this is related to the iMac itself, as I see link being lost on the interface, both in the /private/var/log/kernel.log, and on the switch it is connected to.
Oct 1 18:58:47 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 18:59:41 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 18:59:44 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 18:59:45 branto-imac-01-branto-com kernel[0]: AppleYukon2 - en0 link down
Oct 1 18:59:48 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac0c,0de1,0200,c5e1,2800]
Oct 1 19:01:12 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:01:15 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:01:43 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:01:46 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:01:51 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:01:54 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:02:21 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:02:24 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac0c,0de1,0200,c5e1,2800]
Oct 1 19:02:31 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:02:34 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:02:42 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:02:45 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:04:46 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:04:49 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:04:53 branto-imac-01-branto-com kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:04:56 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:04:57 branto-imac-01-branto-com kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:05:00 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac4c,0de1,0200,c5e1,2800]
Oct 1 19:05:05 branto-imac-01 kernel[0]: AppleYukon2 - en0 link down
Oct 1 19:05:08 branto-imac-01-branto-com kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac0c,0de1,0200,c5e1,2800]
The above messages are filled through the log.

When I point and click on any link I get a drop down window asking if I would like to open in new window etc. How can I turn it off ?

When I point and click on any link I get a drop down window asking if I would like to open in new window etc. How can I turn it off ?

Thank you the-edmeister.
I downloaded the menu editor extension but I can't open it.
Searching on the web for something to open it I get the message from the windows website:
File Type: Unknown
Description: Windows does not recognize this file type.
Any suggestions?
Thanks Steve Shmurak

How can I insert a spreadsheet containing drop down boxes and links to other spreadsheets into a keynotes slide? Please help :(

How can I insert a spreadsheet containing drop down boxes and links to other spreadsheets into a keynotes slide? Please help
I need to retain all the formula's and the sheets these formulas are linked from.

Have you considered switching out of Keynote and over to your spreadsheet program when you get to this slide? If you launch the speadsheet program before Keynote you can switch using Command-Tab. You can then switch back into Keynote when you are done.
I realize that this is not what you were looking for but I don't think it is possible to do exactly what you want.

How to have KM useful links ivew in a drill down tree format.

Hi All,
I am having a KM iview which displays useful links.
The problem is it initially displays only one/two levels of drilldown from the configured root folder. How can we modify such that it displays n levels of folders & links from the configured.
Also here in the iview every user is having access to organize the folders & links with the command link Organize Entries . How can we configure such that this link is visible only when a Role is assigned to the user.
Many Thanks,
Sai.
Edited by: Konchada Sai Krishna on Jun 16, 2009 6:30 AM

Hi All,
I am using KM Navigation iview to display Useful links.
I was using LinlListExplorer layout set earlier.
On search in SDN and SAP help found that we can use RoomTreeLayoutSet to display the KM folders in drilldown tree format.
But unfortunatly, when I preview this RoomTreeLayoutSet in KM config it works fine but when I use this in the iview layout profile, the none of the folder / documents are displayed..
Does anybody came across this issue earlier, how can this be resolved.
Many Thanks,
Sai
Edited by: Konchada Sai Krishna on Jun 17, 2009 5:30 AM

Federated Portal Network FPN: exception Remote Delta Links rdl

Consumer Portal version: 7.01 SP2
Producer Portal version: 7.00 SP15
I always receive an exception when i try to preview a remote delta link.
I think I've setted up correctly the trust relationship between my portals. Because when I log on to my consumer portal and I open the producer portal in the same browser I don't need to give my user credentials. This is a simple test to see if the the trust relationship is working...
In the portal content studio I'm able to see my portal producers and their content. There is also no problem to copy for eg. an url iView from my producer to the portel content of my consumer portal as local content. when I try to preview my iView I receive a runtime error!
Anyone who'd like to share some ideas? Known issues?
Thanks

I've posted my solution in this thread:
Re: Federated Portal Network FPN: exception Remote Delta Links rdl
My problem is already solved!
Thanks anyway,
Gert

TS1398 just purchased a new iPad. it won't link to my WiFi network.   The network is fine, my Mac links to the network as does my PC. What to do?

just purchased a new iPad. it won't link to my WiFi network.   The network is fine, my Mac links to the network as does my PC. What to do?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Migration to 802.1x for large scale Ethernet network

Hi all,
I have a very large wired-only Ethernet network which I would like to migrate to 802.1x for stronger authentication of end users. The problem I have is that there are long chains of legacy swtiches which do not support 802.1x (the topology of the network is a complete tree of switches). As far as I know, 802.1x is port based.
So here is the issue:
- the replacement of all switches will take a very long time, but I would like to have all end users authenticated asap
- switches supporting .1x will initially only be located at the roots of the tree. There will still be legacy switches not supporting .1x between end users and newer switches.
- authentication of users on a port of a new switch will be shared between several end users.
Do you know if it possible to enable authentication of all users but having only enabled 802.1x in some more central locations first?
Cheers,
Benoit

IEEE 802.1x Authentication
These are the IEEE 802.1x authentication configuration guidelines:
?When IEEE 802.1x authentication is enabled, ports are authenticated before any other Layer 2 or Layer 3 features are enabled.
?If you try to change the mode of an IEEE 802.1x-enabled port (for example, from access to trunk), an error message appears, and the port mode is not changed.
?If the VLAN to which an IEEE 802.1x-enabled port is assigned changes, this change is transparent and does not affect the switch. For example, this change occurs if a port is assigned to a RADIUS server-assigned VLAN and is then assigned to a different VLAN after re-authentication.
If the VLAN to which an IEEE 802.1x port is assigned to shut down, disabled, or removed, the port becomes unauthorized. For example, the port is unauthorized after the access VLAN to which a port is assigned shuts down or is removed.
Try these links:
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00805a64d7.html#wp1025090
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00801d11a4.shtml

How LACP works over non-ethernet networks?

Hi all. Everybody knows how works LACP between two switches.
This is predictable wired links. But how it works in another, not clear ethernet networks? Supposing one link in LAG is over wireless transparent bridge. In this case values of packet delay, jitter and packet loss over one of the links differs from another.
Instead wireless bridge there can be IP/MPLS or SDH network for example.
How it works? Are there any tresholds for counters on links? Maybe any configurable parameters?

The configuration of each router should be provided in the Apple Support article link I provided you.
Basically you will not need to make any changes to the Motorola router just the AirPort Express.
Roaming Network Setup Basics
For the AirPort Express base station:
Setup the base station as a bridge. Network tab > Router Mode: Off (Bridge Mode)
Provide a unique Base Station Name.
The Network Name (SSID) should be identical to that of the Motorola.
If using security, use the same security type (WEP, WPA, etc.) and password. Note: It is highly recommended that you use WPA2 Personal for best bandwidth performance.
The following are the basic setup steps:
Power all the networking hardware down.
Perform a "factory default" reset on the AirPort Express. Note: You may have to perform this more than once to make sure they "stick."
Connect one Ethernet cable between the Ethernet port on the Motorola router to the Ethernet port on the Express.
Power up just the Motorola router. Verify that you can get Internet connectivity with network clients either by wireless or by wire connections to the Motorola router.
Power up the Express base station. Use the AirPort Utility to select it.
Configure the Express with the Network Mode option set to: Create a wireless network. (Note: Do NOT set it to "Extend a wireless network."
Set the Wireless Network Name, Wireless Security, & Wireless Password options to be exactly the same as that used for the Motorola.
Set the Router Mode to: Off (Bridge Mode).
Select Update and allow the Express to restart.
Once restarted verify that you can roam with a wireless laptop or iOS device between base stations and still gain Internet access.

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

Unable To Print Over Ethernet Network on HP 6520 all in one

All computers are on windows 8.1. My question or issue is this: Prior to purchasing a Mediabridge wireless router, wireless-n broadband 300 mps router, I had a Zyxtel wireless access point router. I am both Ethernet and wireless. Prior to the Mediabridge I would network print to my HP printer both wireless (iPhone) and over an Ethernet network (PC's and Laptop).
There is an improvement in printing wirelessly on an iPhone. I cannot print over my Ethernet network any longer. I have to unplug my laptop prior to printing before my laptop can see the printer online. With my second PC in another room I am unable to print over the Ethernet network. The printers are installed, drivers and such, but as with the laptop, I would have to unplug the Ethernet cord to print.
My error messages are showing as cannot find printer or or my control panel printer devices show as offline. If I unplug my laptop I can see the printers online. However I don't want to have to take disconnect a second PC in another room to print.
Can you offer any suggestions. Do I need to plug my printer directly into the Mediabridge wireless router?
Nancy
This question was solved.
View Solution.

Hi Nancyh1030,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Photosmart 6520 Printer and getting the error and not printing. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system and connect the printer to same network as the computer. You do have to be connected to the same wireless as the printer to print to it. Unless you are using Eprint. If this does not help you contact Mediabridge.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

About AP Down Payment Request, AP Down payment invoice and AP reserve inv.

Hi:
Which are the main differences? I need to pay in advance to my supplier 100% of the invoice, the purchase invoice would be received one month later. How can i link them? And what about the payment, how can i remember easily that invoices are missing when the account balance is = 0 because the payment is done.
Best regards,
Alberto.

Hi,
There is a business need for companies to issue/receive Invoices including tax (or
VAT) for Down Payments made or received. These Invoices can then be cleared with
partial or final Invoices. Companies can record a Down Payment received in SAP
Business One by creating a Payment not based on an Invoice. However, due to legal
requirements in certain countries the recording of a Down Payment requires an Invoice
or a billing document.
Down Payment Request and Down Payment Invoice documents have their own numbering series. The Down Payment Invoice
resembles a regular Invoice and the Down Payment Request resembles a Sales
Quotation. The user may define a different series under Invoices to be used in the
Down Payment document. Neither of these two documents affects the On Hand stock
or the stock valuation. They can be of Items or Service type.
The process for them are:
Down Payment Invoice>Payment of Down Payment Invoice >Regular Invoice> Payment of Regular Invoice.
Down Payment Request>Payment of Down Payment Request > Regular Invoice >Payment of Regular Invoice and Clearing of Down Payment.
For the invoice paid, you can find a Payment Means icon from Invoice window, click on it, there is payment information and a link for it.
Hope this helps,
maggie an

Airport Express w/Ethernet Network

Hi all!
Is it possible to use the AX to connect to an ethernet network and stream audio? I've tried turning off the radio and using the bridge mode...the AX will appear in the Airport Utility for a couple of minutes, then disappear. I've also tried the roaming setup in a wireless configuration with the same result. The only configuration where I can maintain a connection with the utility is in join a wireless network mode.
Any suggestions?? Basically, I just want to use the ethernet network and avoid wireless.

Apple's instructions to "extend a wireless network" using wireless only are in the link below. Although the illustration pictures a 2nd AirPort Extreme, the setup for an AirPort Express is exactly the same.
http://support.apple.com/kb/HT4259
The Ethernet port is automatically enabled in this type of configuration to allow Ethernet devices to connect. If you need more than one Ethernet connection, you can add an Ethernet switch to the AirPort Express to create more connection capabilities.

Creating Wireless Network via existing Ethernet Network

Hello
I have a problem with setting up my network in my new place, where internet was already available via existing Ethernet network. I tired to solve the problem with the Designing Networks with Airport but I think my case is not described there. First of all let me describe how the Ethernet works. Network is setup by a Modem/router device that was supplied from the ISP, it is connected to the switch that divides the service over 4 different apartments, since it is a quite good connection there is no bandwidth problem, but the ISP device assigns only 5 IP addresses that can get internet service, everything above 5th IP is just an IP without Internet. From my basic knowledge I think that i need at least 4 IP to cover my needs. Time Capsule, Mac book, iTouch and my xbox. IF i set up my TC into a bridge mode it all works, but i am taking to much internet IP's and my neighbors are stuck with the IP's that don't allow them to connect to internet. What I need to know is a detailed instruction how to use one IP address from the 5 available, and using time capsule provide local IP to all of my devices at home so the rest of IPs generated by the ISP device will not be assigned to me.
I tired to set up the time capsule to option Share a public IP address, or static IP's option, but in both cases my devices fail to connect to internet, however they do have assigned IP's by the TC. I have a strange feeling there is a small detail I am missing that keeps me from a successful set up, but of course I might be wrong, because I am relatively new in Mac community and have only basic knowledge in network stuff.
I am sure that I was not the only one that has this problem so if there is another topic about this subject, which I have failed to find, I would appreciate a link. Thanks for help in advance, if any other info is required please don't hesitate to ask, hopefully I can solve my problem with Your help very soon.
Regards

+my Xobox fails to connect to xbox live claiming that I have NAT set as moderate (the NAT map porting is enabled) and I dont know what to do about that. I have googled a bit and there are some suggestions that my TC puts additional layer of NAT on top of my ISP modem/router and that's why it is confused.+
As William has pointed out, in your particular setup, there may be no way around the double layer of NAT. The Time Capsule must be set to "Share a single IP address" if you want to connect multiple devices.
Might be worth confirming that you really do have the additional NAT layer on your network.
Open Hard Drive > Applications > Utilities > Network Utility
Click on the Traceroute tab
Enter an address like "www.mac.com" (without the quotation marks) in the box
Click Trace
Let the trace run for a minute or two and then click Stop
Look at Line 2 only in the log.
If you see a 192.168 or 10.x.x.x address in this line, you have the additional NAT layer on your network.
If that's the case, I'm afraid that the only way to eliminate the NAT service on the Time Capsule is to place it in "bridge" mode. But, I understand that you have limited IP addresses to work with there.
Any way to have more IP addresses authorized for that location? That would appear to be the only solution if you want the Xbox to connect to Xbox live.

Logic bug ethernet network

if you record to an ethernet network drive logic will not update fade files. I have tried everything to make it happen but the reality is that logic has a bug that doesnt allow you to play back fade files on a network drive. does anyone out there have a workaround/ I have just paid a whole bunch of cash to have logic record over the ethernet network and it doesnt work. is there a workaround?
if anyone out there has an ethernet network please do a 'save as' with a project that has fades, copy it to the ethernet network drive and then close down your song and re open it from the network. it will give you an error message. fade files wont update.
soem people say this is a permissions error but the songs play fine on every other type of drive. final cut pro will play from the network, itunes plays from the network. LOGIC will paly from the network but the FADE FILES wont update.
Logic people, please give us an update. If the schools get a hold of this info they are not going to be too happy and Im $2500 into a ethernet network that logic cannot utilise.
iseas anyone? i would love to see this bug fixed or a workaround so i can use my drive.

hi matbd, I think the synology DS411j is a great system, it does what it said it would. The write speed is around 30mbs so that maybe a little slow for some people but the read speed for me is around 80mbs which is great. No matter which raid system you purchase, Logic will not update fade files and since my last post I realize that it also wont update freeze files.
I dont think your workaround can work because I am not sure you can seperate the folder that the fade files write to from the audio files folder. When you record a song it puts everything in the same folder and Im not 'techy' enough to know how to seperate the different folders onto different drives. It may work if you can do it but im not sure how.
http://www.logic-users-group.com/forums/
I posted a message on this forum that ran quite some time. if you read it you will see the various responses I got.
Lastly, I am going to copy one of my songs with a fade file onto the raid, then copy it back to a different local drive to see if it will ressurect the fade files when it goes back to a local drive. If it can do this then at least you can store the files on the raid without damaging the fades.
i hope this answer was useful. if you hear anything else about this matter i would love to know what was said. have a fantastic day
francis

Ethernet/networking link down // AppleYukon2 - en0 link down

Similar Messages

Maybe you are looking for