Ethernet not responding!

My internet has always worked fine, however, using an iMac G5 that I bought 6 months ago, I lost power one night and when I re-aquired my power, the ethernet connection was not functioning. My girlfriend, whom I live with, has an iBook G4. I connected the same cable that was connected to mine, to hers, and the internet works fine. On mine, it doesn't. Using my iMac, I opened Network, under System Pref. and I got a message of "The Cable for built-in ethernet is not plugged in". Plugging the cable into the laptop allows the internet to function, and into the iMac, it does not. I'm no expert, but I'm thinking that my hardware needs repair or replacement. Any ideas? thanks in advance, Scott.
iMac G5   Mac OS X (10.4.6)  

Assuming you have the iMac Intel, have you tried the SMC reset?
If you do NOT have an iMac Intel, you should perform the SMU reset.
CAUTION - although at first glance these may appear similar, they are NOT.

Similar Messages

  • Net connection trouble: "No Ethernet cable connected or the device is not responding"

    Hello
    I have been plagued by a dropping Net connection for a couple of months, and as it has been getting worse lately I have tried to sort out the problem.
    I have simplyfied my connection between the computers and the VSDL fiber modem by bypassing my AirPort Express and Ethernet hub and connecting the three computers directly to the built in ports on the modem.
    Since I did that a new error message has started appearing on my Mac Mini, saying that I have no Ethernet cable connected to the modem, or the device is not responding. At the moment I have two of the machines connected, and the Mac Book Air seems to work without problems. There are lights on the Ethernet ports on the modem, and they are lighting up for the iBook even when the Mac Mini connection drops. When the Mac Mini connection drops the lights go off on its Ethernet port on the modem.
    This seems to point to some sort of trouble with the Mac Mini. Is there a way to monitor what's going on? Can I use Terminal, for instace? It can't be the settings, and it cant' be the cable, so it must be related to the hardware I suppose. I am using DHCP to connect to the modem.
    The connection drops arbitrarily, sometimes for long periods of time, and then comes back up again by itself.
    Any ideas for trouble shooting etc?
    Best
    Hans Karlsson

    BDAqua
    Thanks again. Unfortunately, the problems are back again. Had a stable connection and connected the AirPort again. Everything was working fine. Then all of a sudden the connection dropped again today.h
    Connected a LAN cable directly to my MacBook Air and got the connection to work immediately.
    Took that cable and connected to my MacMini, again, connection came back immediately.
    The AirPort (in Brigde Mode) is also connected, but gives me a blinking orange light, and the same "no cable or (modem) is not responding" message again.
    I guess this must rule out hardware problems in the computers.
    Ligth for the LAN cable port on the modem connected to AirPort is dead. Moved the cable to another port, light still dead.
    Shut down AirPort Express, still same orange blinking light when I switched it on.
    I now suspect there is something going on with the AirPort Express. Just bought it, and I had the same problem with it's predecessor, but...
    Is there any way to trouble shoot the AirPort Express?
    I can connect to it Wirelessly, But AirPort Utility says it has been removed from the Network. In the Network Preferences it says it has a self-assigned IP. For Network Settings I get green lights for everything except Network Settings, which gives me a yellow light. It also says the Internet connetcion is working correctly.
    Indeed, when I made the direct Ethernet connection inactive I still get a working connection over WiFi, in spite of the blinking orange light on the AirPort and a yellow light for Network settings in Prefereces....
    In the console things look normal:
    8/7/12 10:04:27.269 PM Apple80211 framework[231]: 
    com.apple.message.domain: com.apple.wifi.timeout.scan
    com.apple.message.signature: Success
    com.apple.message.result: pass
    com.apple.message.value: 3149.000000
    com.apple.message.summarize: YES
    Still confused

  • Computer not responding during migration assist

    I bought a 27" iMac and have been trying to use migration assist to transfer my files and settings over from my 17" MacBook Pro with little success.  The iMac recognizes the MacBook and the confirmation code pops up on both but once the migration begins, the iMac has a message pop up that says the MacBook is not responding, even though it has a message saying that the iMac is ready. 
    I've tried searching other posts here but can't seem to find any with the same issue.  Any suggestions would be appreciated.
    Thanks.

    Well, I was following the instructions as they were presented on the screen.  As I mentioned, things seemed to progress normally, the two computers seemed to be communicating but then the message that the MBP was not responding would pop up and I would be forced to quit the migration.
    I had tried both FW 800 and ethernet connections to no avail.  After updating the iMac, I am running Mountain Lion on both machines and had consulted Pondini's guide prior to posting here.  I also opened up all the sharing options I could find on both computers thinking that would help. I'll take a closer look at Pondini's guide and see if that provides some answers.
    Thanks.

  • AMD A6-5400k - CPU1: Not Responding

    Hi fellas,
    I got a new CPU for my maschine, which runs on ARCH-x86_64 Kernel 3.6.10. So far everything went fine but one thing:
    At boot, only of the two cores is recognized. This is only the case in Arch, both BIOS and Windows show both Cores. I rebuilt my initramfs and reinstalled linux, but none helped.
    I realize, there are several topics around the www and this board, but none of them helped me in my case.
    I tried some things, like booting the LTS-Kernel.
    Any ideas how I can solve this issue?
    I got the outputs of dmesg (system boot):
    I think the relevant Lines are around 0.17000.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0.46-1-lts (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Oct 12 23:52:43 CEST 2012
    [ 0.000000] Command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000009d575000 (usable)
    [ 0.000000] BIOS-e820: 000000009d575000 - 000000009d856000 (reserved)
    [ 0.000000] BIOS-e820: 000000009d856000 - 000000009dbae000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000009dbae000 - 000000009e9d3000 (reserved)
    [ 0.000000] BIOS-e820: 000000009e9d3000 - 000000009e9d4000 (usable)
    [ 0.000000] BIOS-e820: 000000009e9d4000 - 000000009ebda000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000009ebda000 - 000000009f04c000 (usable)
    [ 0.000000] BIOS-e820: 000000009f04c000 - 000000009f7dd000 (reserved)
    [ 0.000000] BIOS-e820: 000000009f7dd000 - 000000009f800000 (usable)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100001000 - 000000043f000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-D1FFF write-protect
    [ 0.000000] D2000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000043f000000 aka 17392M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 000000009f800000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0x9f800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-000000009f800000
    [ 0.000000] 0000000000 - 0080000000 page 1G
    [ 0.000000] 0080000000 - 009f800000 page 2M
    [ 0.000000] kernel direct mapping tables up to 9f800000 @ 1fffe000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000
    [ 0.000000] 0100000000 - 0400000000 page 1G
    [ 0.000000] 0400000000 - 043f000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 43f000000 @ 9f7fe000-9f800000
    [ 0.000000] RAMDISK: 79bca000 - 7ffff000
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 000000009db97080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 000000009db9cf90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
    [ 0.000000] ACPI: DSDT 000000009db97190 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 000000009dba6d80 00040
    [ 0.000000] ACPI: APIC 000000009db9d088 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 000000009db9d100 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 000000009db9d148 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    [ 0.000000] ACPI: HPET 000000009db9d188 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
    [ 0.000000] ACPI: IFEU 000000009db9d1c0 00042 (v01 ALASKA A M I 01072009 00000000)
    [ 0.000000] ACPI: BGRT 000000009db9d208 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 000000009db9d240 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 000000009db9d8f8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: IVRS 000000009db9ddb0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
    [ 0.000000] ACPI: CRAT 000000009db9de20 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000043f000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000
    [ 0.000000] NODE_DATA [000000043effb000 - 000000043effffff]
    [ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ee00000-ffff88043c7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0043f000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[6] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0009d575
    [ 0.000000] 0: 0x0009e9d3 -> 0x0009e9d4
    [ 0.000000] 0: 0x0009ebda -> 0x0009f04c
    [ 0.000000] 0: 0x0009f7dd -> 0x0009f800
    [ 0.000000] 0: 0x00100001 -> 0x0043f000
    [ 0.000000] On node 0 totalpages: 4049304
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 627267 pages, LIFO batch:31
    [ 0.000000] Normal zone: 46536 pages used for memmap
    [ 0.000000] Normal zone: 3357239 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000009d575000 - 000000009d856000
    [ 0.000000] PM: Registered nosave memory: 000000009d856000 - 000000009dbae000
    [ 0.000000] PM: Registered nosave memory: 000000009dbae000 - 000000009e9d3000
    [ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
    [ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
    [ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
    [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
    [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [ 0.000000] Allocating PCI resources starting at 9f800000 (gap: 9f800000:5f400000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s79360 r8192 d23040 u524288
    [ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3988427
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 15793100k/17809408k available (4239k kernel code, 1612192k absent, 404116k reserved, 5184k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 130023424 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 3593.482 MHz processor.
    [ 0.030003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.96 BogoMIPS (lpj=35934820)
    [ 0.030067] pid_max: default: 32768 minimum: 301
    [ 0.030186] Security Framework initialized
    [ 0.030219] AppArmor: AppArmor disabled by boot time parameter
    [ 0.031478] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.038170] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.042321] Mount-cache hash table entries: 256
    [ 0.042958] Initializing cgroup subsys cpuacct
    [ 0.043012] Initializing cgroup subsys memory
    [ 0.043055] Initializing cgroup subsys devices
    [ 0.043086] Initializing cgroup subsys freezer
    [ 0.043118] Initializing cgroup subsys net_cls
    [ 0.043149] Initializing cgroup subsys blkio
    [ 0.043215] tseg: 009f800000
    [ 0.043216] CPU: Physical Processor ID: 0
    [ 0.043248] CPU: Processor Core ID: 0
    [ 0.043279] mce: CPU supports 7 MCE banks
    [ 0.044338] ACPI: Core revision 20110413
    [ 0.050017] ftrace: allocating 16878 entries in 67 pages
    [ 0.060590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.160953] CPU0: AMD A6-5400K APU with Radeon(tm) HD Graphics stepping 01
    [ 0.170000] Performance Events: AMD Family 15h PMU driver.
    [ 0.170000] ... version: 0
    [ 0.170000] ... bit width: 48
    [ 0.170000] ... generic registers: 6
    [ 0.170000] ... value mask: 0000ffffffffffff
    [ 0.170000] ... max period: 00007fffffffffff
    [ 0.170000] ... fixed-purpose events: 0
    [ 0.170000] ... event mask: 000000000000003f
    [ 0.170000] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.170000] Booting Node 0, Processors #1
    [ 0.170000] smpboot cpu 1: start_ip = 99000
    [ 7.443437] CPU1: Not responding.
    [ 7.445038] Brought up 1 CPUs
    [ 7.445164] Total of 1 processors activated (7186.96 BogoMIPS).
    [ 7.449107] devtmpfs: initialized
    [ 7.482442] PM: Registering ACPI NVS region at 9d856000 (3506176 bytes)
    [ 7.486598] PM: Registering ACPI NVS region at 9e9d4000 (2121728 bytes)
    [ 7.493031] NET: Registered protocol family 16
    [ 7.496249] Extended Config Space enabled on 0 nodes
    [ 7.496483] ACPI: bus type pci registered
    [ 7.498432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 7.498554] PCI: not using MMCONFIG
    [ 7.498978] PCI: Using configuration type 1 for base access
    [ 7.499066] PCI: Using configuration type 1 for extended access
    [ 7.527324] bio: create slab <bio-0> at 0
    [ 7.601576] ACPI: EC: Look up EC in DSDT
    [ 7.685139] ACPI: Executed 1 blocks of module-level executable AML code
    [ 7.830050] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 7.845972] ACPI: Interpreter enabled
    [ 7.846060] ACPI: (supports S0 S3 S4 S5)
    [ 7.847202] ACPI: Using IOAPIC for interrupt routing
    [ 7.850557] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 7.851641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 10.009318] ACPI: No dock devices found.
    [ 10.009448] HEST: Table not found.
    [ 10.009563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 10.018400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 10.028017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
    [ 10.028139] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
    [ 10.028263] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
    [ 10.028386] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 10.028508] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 10.028639] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 10.029075] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
    [ 10.029299] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
    [ 10.030321] pci 0000:00:00.2: [1022:1419] type 0 class 0x000806
    [ 10.032320] pci 0000:00:01.0: [1002:9991] type 0 class 0x000300
    [ 10.032465] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
    [ 10.032576] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
    [ 10.032990] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
    [ 10.034009] pci 0000:00:01.0: supports D1 D2
    [ 10.034262] pci 0000:00:01.1: [1002:9902] type 0 class 0x000403
    [ 10.034406] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
    [ 10.035595] pci 0000:00:01.1: supports D1 D2
    [ 10.036209] pci 0000:00:02.0: [1022:1412] type 1 class 0x000604
    [ 10.037405] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 10.037463] pci 0000:00:02.0: PME# disabled
    [ 10.038065] pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
    [ 10.039258] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 10.039316] pci 0000:00:04.0: PME# disabled
    [ 10.040227] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
    [ 10.040423] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
    [ 10.041630] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 10.041993] pci 0000:00:10.0: PME# disabled
    [ 10.042315] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
    [ 10.042510] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
    [ 10.044002] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
    [ 10.044059] pci 0000:00:10.1: PME# disabled
    [ 10.044424] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
    [ 10.044632] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
    [ 10.045026] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
    [ 10.045141] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
    [ 10.045255] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
    [ 10.045372] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
    [ 10.045486] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
    [ 10.046377] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
    [ 10.046528] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
    [ 10.047596] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
    [ 10.048081] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
    [ 10.049232] pci 0000:00:12.2: supports D1 D2
    [ 10.049268] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 10.049324] pci 0000:00:12.2: PME# disabled
    [ 10.049558] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
    [ 10.050126] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
    [ 10.051154] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
    [ 10.051363] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
    [ 10.052509] pci 0000:00:13.2: supports D1 D2
    [ 10.052545] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 10.052603] pci 0000:00:13.2: PME# disabled
    [ 10.053123] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
    [ 10.054237] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
    [ 10.054467] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 10.055437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 10.055495] pci 0000:00:14.2: PME# disabled
    [ 10.055640] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
    [ 10.056993] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
    [ 10.057448] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
    [ 10.057598] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
    [ 10.058964] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
    [ 10.059537] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
    [ 10.060476] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
    [ 10.061308] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
    [ 10.062308] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
    [ 10.063128] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
    [ 10.064976] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
    [ 10.065120] pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeadffff]
    [ 10.065243] pci 0000:01:00.0: reg 14: [mem 0xfea00000-0xfea7ffff]
    [ 10.065364] pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
    [ 10.065487] pci 0000:01:00.0: reg 1c: [mem 0xfeae0000-0xfeae3fff]
    [ 10.066064] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeabffff pref]
    [ 10.066618] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 10.066975] pci 0000:01:00.0: PME# disabled
    [ 10.067368] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 10.067531] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 10.067587] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 10.067969] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 10.068963] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
    [ 10.069068] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
    [ 10.069308] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 10.069469] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 10.070508] pci 0000:02:00.0: supports D1 D2
    [ 10.070544] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 10.070602] pci 0000:02:00.0: PME# disabled
    [ 10.071304] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [ 10.071465] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    [ 10.071522] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 10.071601] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.072247] pci 0000:03:06.0: [1095:3114] type 0 class 0x000104
    [ 10.072438] pci 0000:03:06.0: reg 10: [io 0xc040-0xc047]
    [ 10.072558] pci 0000:03:06.0: reg 14: [io 0xc030-0xc033]
    [ 10.072989] pci 0000:03:06.0: reg 18: [io 0xc020-0xc027]
    [ 10.073069] pci 0000:03:06.0: reg 1c: [io 0xc010-0xc013]
    [ 10.073186] pci 0000:03:06.0: reg 20: [io 0xc000-0xc00f]
    [ 10.073303] pci 0000:03:06.0: reg 24: [mem 0xfe980000-0xfe9803ff]
    [ 10.073420] pci 0000:03:06.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
    [ 10.074010] pci 0000:03:06.0: supports D1 D2
    [ 10.074426] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 10.074564] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 10.074621] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 10.074981] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 10.074993] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 10.075032] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 10.075071] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 10.075108] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 10.075146] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 10.075183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 10.075220] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 10.075413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 10.087428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 10.092229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
    [ 10.093609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
    [ 10.098972] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 10.105356] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 10.469632] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.473051] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.476159] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.479249] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.482314] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.485047] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.487433] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.490344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 10.494044] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 10.494442] vgaarb: loaded
    [ 10.494556] vgaarb: bridge control possible 0000:00:01.0
    [ 10.496198] PCI: Using ACPI for IRQ routing
    [ 10.574000] PCI: pci_cache_line_size set to 64 bytes
    [ 10.575540] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 10.575579] reserve RAM buffer: 000000009d575000 - 000000009fffffff
    [ 10.575976] reserve RAM buffer: 000000009e9d4000 - 000000009fffffff
    [ 10.576002] reserve RAM buffer: 000000009f04c000 - 000000009fffffff
    [ 10.576049] reserve RAM buffer: 000000009f800000 - 000000009fffffff
    [ 10.576088] reserve RAM buffer: 000000043f000000 - 000000043fffffff
    [ 10.579048] NetLabel: Initializing
    [ 10.579161] NetLabel: domain hash size = 128
    [ 10.579273] NetLabel: protocols = UNLABELED CIPSOv4
    [ 10.580048] NetLabel: unlabeled traffic allowed by default
    [ 10.580185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 10.580995] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 10.583427] Switching to clocksource hpet
    [ 10.586451] Switched to NOHz mode on CPU #0
    [ 10.846011] pnp: PnP ACPI init
    [ 10.846721] ACPI: bus type pnp registered
    [ 10.851432] pnp 00:00: [bus 00-ff]
    [ 10.851473] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 10.851513] pnp 00:00: [io 0x0000-0x03af window]
    [ 10.851555] pnp 00:00: [io 0x03e0-0x0cf7 window]
    [ 10.851596] pnp 00:00: [io 0x03b0-0x03df window]
    [ 10.851637] pnp 00:00: [io 0x0d00-0xffff window]
    [ 10.851678] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 10.851718] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 10.851759] pnp 00:00: [mem 0xc0000000-0xffffffff window]
    [ 10.851799] pnp 00:00: [mem 0x00000000 window]
    [ 10.853412] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 10.854370] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 10.855576] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 10.855722] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 10.880640] pnp 00:02: [io 0x0010-0x001f]
    [ 10.880679] pnp 00:02: [io 0x0022-0x003f]
    [ 10.880718] pnp 00:02: [io 0x0063]
    [ 10.880756] pnp 00:02: [io 0x0065]
    [ 10.880795] pnp 00:02: [io 0x0067-0x006f]
    [ 10.880834] pnp 00:02: [io 0x0072-0x007f]
    [ 10.880873] pnp 00:02: [io 0x0080]
    [ 10.880912] pnp 00:02: [io 0x0084-0x0086]
    [ 10.880975] pnp 00:02: [io 0x0088]
    [ 10.881014] pnp 00:02: [io 0x008c-0x008e]
    [ 10.881052] pnp 00:02: [io 0x0090-0x009f]
    [ 10.881387] pnp 00:02: [io 0x00a2-0x00bf]
    [ 10.881422] pnp 00:02: [io 0x00b1]
    [ 10.881458] pnp 00:02: [io 0x00e0-0x00ef]
    [ 10.881494] pnp 00:02: [io 0x04d0-0x04d1]
    [ 10.881529] pnp 00:02: [io 0x040b]
    [ 10.881565] pnp 00:02: [io 0x04d6]
    [ 10.881601] pnp 00:02: [io 0x0c00-0x0c01]
    [ 10.881636] pnp 00:02: [io 0x0c14]
    [ 10.881672] pnp 00:02: [io 0x0c50-0x0c51]
    [ 10.881708] pnp 00:02: [io 0x0c52]
    [ 10.881743] pnp 00:02: [io 0x0c6c]
    [ 10.881779] pnp 00:02: [io 0x0c6f]
    [ 10.881815] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 10.881851] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 10.881886] pnp 00:02: [io 0x0cd4-0x0cd5]
    [ 10.881924] pnp 00:02: [io 0x0cd6-0x0cd7]
    [ 10.881959] pnp 00:02: [io 0x0cd8-0x0cdf]
    [ 10.881997] pnp 00:02: [io 0x0800-0x089f]
    [ 10.882033] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 10.882376] pnp 00:02: [io 0x0000-0x000f]
    [ 10.882401] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 10.882438] pnp 00:02: [io 0x0900-0x090f]
    [ 10.882474] pnp 00:02: [io 0x0910-0x091f]
    [ 10.882512] pnp 00:02: [io 0xfe00-0xfefe]
    [ 10.882547] pnp 00:02: [io 0x0060-0x005f disabled]
    [ 10.882583] pnp 00:02: [io 0x0064-0x0063 disabled]
    [ 10.882619] pnp 00:02: [mem 0xfec00000-0xfec00fff]
    [ 10.882656] pnp 00:02: [mem 0xfee00000-0xfee00fff]
    [ 10.882692] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
    [ 10.882728] pnp 00:02: [mem 0xfed61000-0xfed70fff]
    [ 10.882763] pnp 00:02: [mem 0xfec10000-0xfec10fff]
    [ 10.882801] pnp 00:02: [mem 0xfed00000-0xfed00fff]
    [ 10.882836] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 10.884490] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 10.884616] system 00:02: [io 0x040b] has been reserved
    [ 10.884742] system 00:02: [io 0x04d6] has been reserved
    [ 10.884866] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 10.884988] system 00:02: [io 0x0c14] has been reserved
    [ 10.885440] system 00:02: [io 0x0c50-0x0c51] has been reserved
    [ 10.885563] system 00:02: [io 0x0c52] has been reserved
    [ 10.885685] system 00:02: [io 0x0c6c] has been reserved
    [ 10.885807] system 00:02: [io 0x0c6f] has been reserved
    [ 10.885929] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 10.886375] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 10.886496] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
    [ 10.886619] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
    [ 10.886741] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
    [ 10.886863] system 00:02: [io 0x0800-0x089f] has been reserved
    [ 10.886986] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 10.887433] system 00:02: [io 0x0900-0x090f] has been reserved
    [ 10.887557] system 00:02: [io 0x0910-0x091f] has been reserved
    [ 10.887679] system 00:02: [io 0xfe00-0xfefe] has been reserved
    [ 10.887806] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 10.887928] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 10.888360] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 10.888468] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 10.888593] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 10.888715] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 10.888840] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
    [ 10.888981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.892417] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
    [ 10.892456] pnp 00:03: [io 0x0220-0x0227]
    [ 10.892494] pnp 00:03: [io 0x0228-0x0237]
    [ 10.892534] pnp 00:03: [io 0x0a20-0x0a2f]
    [ 10.893890] system 00:03: [io 0x0220-0x0227] has been reserved
    [ 10.894018] system 00:03: [io 0x0228-0x0237] has been reserved
    [ 10.894460] system 00:03: [io 0x0a20-0x0a2f] has been reserved
    [ 10.894605] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.901525] pnp 00:04: [dma 4]
    [ 10.901565] pnp 00:04: [io 0x0000-0x000f]
    [ 10.901629] pnp 00:04: [io 0x0081-0x0083]
    [ 10.901667] pnp 00:04: [io 0x0087]
    [ 10.901706] pnp 00:04: [io 0x0089-0x008b]
    [ 10.901745] pnp 00:04: [io 0x008f]
    [ 10.901784] pnp 00:04: [io 0x00c0-0x00df]
    [ 10.902753] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 10.903004] pnp 00:05: [io 0x0070-0x0071]
    [ 10.903394] pnp 00:05: [irq 8]
    [ 10.904399] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 10.904582] pnp 00:06: [io 0x0061]
    [ 10.905587] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 10.906373] pnp 00:07: [io 0x0010-0x001f]
    [ 10.906408] pnp 00:07: [io 0x0022-0x003f]
    [ 10.906444] pnp 00:07: [io 0x0044-0x005f]
    [ 10.906481] pnp 00:07: [io 0x0072-0x007f]
    [ 10.906517] pnp 00:07: [io 0x0080]
    [ 10.906555] pnp 00:07: [io 0x0084-0x0086]
    [ 10.906592] pnp 00:07: [io 0x0088]
    [ 10.906627] pnp 00:07: [io 0x008c-0x008e]
    [ 10.906663] pnp 00:07: [io 0x0090-0x009f]
    [ 10.906699] pnp 00:07: [io 0x00a2-0x00bf]
    [ 10.906735] pnp 00:07: [io 0x00e0-0x00ef]
    [ 10.906771] pnp 00:07: [io 0x04d0-0x04d1]
    [ 10.908470] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 10.908615] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.908803] pnp 00:08: [io 0x00f0-0x00ff]
    [ 10.908895] pnp 00:08: [irq 13]
    [ 10.910515] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 10.912466] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.916697] pnp 00:0a: [mem 0xa0000000-0xbfffffff]
    [ 10.918472] system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
    [ 10.918619] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.920584] pnp 00:0b: [mem 0xfeb80000-0xfebfffff]
    [ 10.922399] system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved
    [ 10.922543] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 10.927499] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
    [ 10.928848] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 10.928958] pnp: PnP ACPI: found 13 devices
    [ 10.929375] ACPI: ACPI bus type pnp unregistered
    [ 10.990732] PCI: max bus depth: 1 pci_try_num: 2
    [ 10.990936] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 10.991384] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 10.991521] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 10.991658] pci 0000:00:02.0: bridge window [mem pref disabled]
    [ 10.991821] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [ 10.991949] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    [ 10.992386] pci 0000:00:04.0: bridge window [mem disabled]
    [ 10.992514] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.992683] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 10.992810] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 10.992960] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 10.993389] pci 0000:00:14.4: bridge window [mem pref disabled]
    [ 10.993675] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.993815] pci 0000:00:02.0: setting latency timer to 64
    [ 10.993994] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 10.994461] pci 0000:00:04.0: setting latency timer to 64
    [ 10.994566] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 10.994605] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 10.994644] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 10.994682] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 10.994721] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 10.994760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 10.994799] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 10.994837] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 10.994876] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 10.994915] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 10.994954] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 10.994993] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 10.995032] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 10.995368] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 10.995377] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 10.995414] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 10.995449] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 10.995485] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 10.995523] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 10.995559] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 10.996013] NET: Registered protocol family 2
    [ 11.011431] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 11.044698] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 11.051435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 11.051803] TCP: Hash tables configured (established 524288 bind 65536)
    [ 11.051921] TCP reno registered
    [ 11.052935] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 11.054372] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 11.056540] NET: Registered protocol family 1
    [ 11.056817] pci 0000:00:01.0: Boot video device
    [ 11.057014] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.057627] pci 0000:00:10.0: PCI INT A disabled
    [ 11.057906] pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.058488] pci 0000:00:10.1: PCI INT B disabled
    [ 11.058705] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.150025] pci 0000:00:12.0: PCI INT A disabled
    [ 11.150071] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.150124] pci 0000:00:12.2: PCI INT B disabled
    [ 11.150160] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 11.240018] pci 0000:00:13.0: PCI INT A disabled
    [ 11.240057] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 11.240102] pci 0000:00:13.2: PCI INT B disabled
    [ 11.240147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.330018] pci 0000:00:14.5: PCI INT C disabled
    [ 11.330066] PCI: CLS 64 bytes, default 64
    [ 11.330109] Unpacking initramfs...
    [ 0.040000] Kernel panic - not syncing: smp_callin: CPU1 started up but did not get a callout!
    [ 0.040000]
    [ 0.040000] Pid: 0, comm: kworker/0:0 Not tainted 3.0.46-1-lts #1
    [ 0.040000] Call Trace:
    [ 0.040000] [<ffffffff8140f6cd>] panic+0x91/0x197
    [ 0.040000] [<ffffffff8140884c>] start_secondary+0xcb/0x1fe
    [ 26.201608] Freeing initrd memory: 102612k freed
    [ 26.228111] pci 0000:00:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 26.228318] pci 0000:00:00.2: irq 40 for MSI/MSI-X
    [ 26.228396] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
    [ 26.240635] AMD-Vi: Lazy IO/TLB flushing enabled
    [ 26.240671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 26.240706] Placing 64MB software IO TLB between ffff880099575000 - ffff88009d575000
    [ 26.240743] software IO TLB at phys 0x99575000 - 0x9d575000
    [ 26.241067] audit: initializing netlink socket (disabled)
    [ 26.241110] type=2000 audit(1356177972.230:1): initialized
    [ 26.250693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 26.254005] VFS: Disk quotas dquot_6.5.2
    [ 26.254149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 26.254346] msgmni has been set to 31046
    [ 26.254555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 26.254612] io scheduler noop registered
    [ 26.254646] io scheduler deadline registered (default)
    [ 26.254719] io scheduler cfq registered
    [ 26.254848] pcieport 0000:00:02.0: setting latency timer to 64
    [ 26.254910] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
    [ 26.254987] pcieport 0000:00:04.0: setting latency timer to 64
    [ 26.255045] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
    [ 26.255142] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 26.255177] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 26.255212] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 26.255257] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
    [ 26.255291] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 26.255327] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
    [ 26.255434] ERST: Table is not found!
    [ 26.255511] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 26.255875] Linux agpgart interface v0.103
    [ 26.255970] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 26.256358] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 26.256395] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 26.256512] mousedev: PS/2 mouse device common for all mice
    [ 26.256588] rtc_cmos 00:05: RTC can wake from S4
    [ 26.256715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 26.256781] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 26.256827] cpuidle: using governor ladder
    [ 26.256868] cpuidle: using governor menu
    [ 26.257182] TCP cubic registered
    [ 26.257413] NET: Registered protocol family 10
    [ 26.258198] NET: Registered protocol family 17
    [ 26.258233] Registering the dns_resolver key type
    [ 26.258395] PM: Hibernation image not present or could not be loaded.
    [ 26.258450] registered taskstats version 1
    [ 26.259761] rtc_cmos 00:05: setting system clock to 2012-12-22 12:06:13 UTC (1356177973)
    [ 26.261125] Initializing network drop monitor service
    [ 26.263013] Freeing unused kernel memory: 732k freed
    [ 26.263239] Write protecting the kernel read-only data: 8192k
    [ 26.272919] Freeing unused kernel memory: 1888k freed
    [ 26.277038] Freeing unused kernel memory: 696k freed
    [ 26.303407] systemd-udevd[37]: starting version 194
    [ 27.541378] Refined TSC clocksource calibration: 3593.465 MHz.
    [ 27.541426] Switching to clocksource tsc
    [ 30.186206] HDA Intel 0000:00:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 30.186313] HDA Intel 0000:00:01.1: irq 43 for MSI/MSI-X
    [ 30.186378] HDA Intel 0000:00:01.1: setting latency timer to 64
    [ 30.191054] usbcore: registered new interface driver usbfs
    [ 30.191133] usbcore: registered new interface driver hub
    [ 30.197110] SCSI subsystem initialized
    [ 30.216692] usbcore: registered new device driver usb
    [ 30.220148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 30.232290] input: PC Speaker as /devices/platform/pcspkr/input/input0
    [ 30.234124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 30.239267] libata version 3.00 loaded.
    [ 30.244294] ACPI: acpi_idle registered with cpuidle
    [ 30.246226] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 30.246282] ACPI: Power Button [PWRB]
    [ 30.246380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 30.246418] ACPI: Power Button [PWRF]
    [ 30.249692] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
    [ 30.249737] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 30.249802] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    [ 30.249846] e1000e 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 30.249902] e1000e 0000:01:00.0: setting latency timer to 64
    [ 30.250227] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 30.250263] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
    [ 30.250307] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 30.252812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 30.252873] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 30.252954] r8169 0000:02:00.0: setting latency timer to 64
    [ 30.253001] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
    [ 30.253103] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 30.253760] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000187e000, 94:de:80:06:0b:c2, XID 0c900800 IRQ 47
    [ 30.253799] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [ 30.255615] sata_sil 0000:03:06.0: version 2.4
    [ 30.255694] sata_sil 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 30.255763] sata_sil 0000:03:06.0: Applying R_ERR on DMA activate FIS errata fix
    [ 30.259490] scsi0 : sata_sil
    [ 30.262529] scsi1 : sata_sil
    [ 30.265318] scsi2 : sata_sil
    [ 30.268147] scsi3 : sata_sil
    [ 30.268259] ata1: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980080 irq 20
    [ 30.268301] ata2: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9800c0 irq 20
    [ 30.268350] ata3: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980280 irq 20
    [ 30.268389] ata4: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9802c0 irq 20
    [ 30.375388] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0c:a8:da
    [ 30.375437] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
    [ 30.375481] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
    [ 30.620035] ata1: SATA link down (SStatus 0 SControl 310)
    [ 30.970035] ata2: SATA link down (SStatus 0 SControl 310)
    [ 31.320029] ata3: SATA link down (SStatus 0 SControl 310)
    [ 31.670023] ata4: SATA link down (SStatus 0 SControl 310)
    [ 31.674284] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 31.674524] HDMI: no space for converter 10
    [ 31.674615] HDMI: no space for converter 12
    [ 31.674967] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
    [ 31.675144] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 31.776299] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.776372] xhci_hcd 0000:00:10.0: setting latency timer to 64
    [ 31.776418] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 31.776483] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    [ 31.776563] QUIRK: Enable AMD PLL fix
    [ 31.776792] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
    [ 31.776885] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
    [ 31.776920] xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
    [ 31.777146] xHCI xhci_add_endpoint called for root hub
    [ 31.777190] xHCI xhci_check_bandwidth called for root hub
    [ 31.777261] hub 1-0:1.0: USB hub found
    [ 31.777297] hub 1-0:1.0: 2 ports detected
    [ 31.777433] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 31.777473] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    [ 31.780285] xHCI xhci_add_endpoint called for root hub
    [ 31.780329] xHCI xhci_check_bandwidth called for root hub
    [ 31.780399] hub 2-0:1.0: USB hub found
    [ 31.780436] hub 2-0:1.0: 2 ports detected
    [ 31.780543] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.780600] xhci_hcd 0000:00:10.1: setting latency timer to 64
    [ 31.780635] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [ 31.780673] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    [ 31.780929] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
    [ 31.781018] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
    [ 31.781053] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
    [ 31.781245] xHCI xhci_add_endpoint called for root hub
    [ 31.781289] xHCI xhci_check_bandwidth called for root hub
    [ 31.781358] hub 3-0:1.0: USB hub found
    [ 31.781393] hub 3-0:1.0: 2 ports detected
    [ 31.781502] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [ 31.781554] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
    [ 31.784397] xHCI xhci_add_endpoint called for root hub
    [ 31.784430] xHCI xhci_check_bandwidth called for root hub
    [ 31.784493] hub 4-0:1.0: USB hub found
    [ 31.784540] hub 4-0:1.0: 2 ports detected
    [ 31.785260] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.785314] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 31.785363] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
    [ 31.785405] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 31.785467] ehci_hcd 0000:00:12.2: debug port 1
    [ 31.785526] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
    [ 31.800124] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 31.800381] hub 5-0:1.0: USB hub found
    [ 31.800426] hub 5-0:1.0: 5 ports detected
    [ 31.800575] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 31.800648] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 31.800698] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
    [ 31.800740] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 31.800804] ehci_hcd 0000:00:13.2: debug port 1
    [ 31.800861] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
    [ 31.820016] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 31.820236] hub 6-0:1.0: USB hub found
    [ 31.820271] hub 6-0:1.0: 5 ports detected
    [ 31.820930] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.820996] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 31.821039] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
    [ 31.821105] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
    [ 31.884261] hub 7-0:1.0: USB hub found
    [ 31.884311] hub 7-0:1.0: 5 ports detected
    [ 31.884462] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 31.884533] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 31.884580] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
    [ 31.884644] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
    [ 31.944186] hub 8-0:1.0: USB hub found
    [ 31.944235] hub 8-0:1.0: 5 ports detected
    [ 31.944362] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 31.944416] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 31.944452] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
    [ 31.944510] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
    [ 32.004245] hub 9-0:1.0: USB hub found
    [ 32.004283] hub 9-0:1.0: 2 ports detected
    [ 32.004581] ahci 0000:00:11.0: version 3.0
    [ 32.004627] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 32.004727] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
    [ 32.004892] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 7 ports 6 Gbps 0xfd impl SATA mode
    [ 32.004931] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 32.009602] scsi4 : ahci
    [ 32.009824] scsi5 : ahci
    [ 32.010050] scsi6 : ahci
    [ 32.010213] scsi7 : ahci
    [ 32.010363] scsi8 : ahci
    [ 32.010529] scsi9 : ahci
    [ 32.010677] scsi10 : ahci
    [ 32.010837] scsi11 : ahci
    [ 32.011601] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
    [ 32.012773] ata6: DUMMY
    [ 32.012806] ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
    [ 32.012845] ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
    [ 32.012893] ata9: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
    [ 32.012930] ata10: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
    [ 32.012969] ata11: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 52
    [ 32.013016] ata12: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 52
    [ 32.120025] usb 5-3: new high speed USB device number 2 using ehci_hcd
    [ 32.274376] Initializing USB Mass Storage driver...
    [ 32.274825] scsi12 : usb-storage 5-3:1.0
    [ 32.274957] usbcore: registered new interface driver usb-storage
    [ 32.274991] USB Mass Storage support registered.
    [ 32.560018] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 32.560079] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 32.560196] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560242] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 32.560299] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 32.560580] ata7.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
    [ 32.560626] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.560947] ata11.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
    [ 32.560993] ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 32.561209] ata7.00: configured for UDMA/133
    [ 32.561773] ata11.00: configured for UDMA/133
    [ 32.563779] ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 32.563814] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.564285] ata5.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
    [ 32.564327] ata5.00: 488397168 sectors, multi 16: LBA48
    [ 32.566291] ata10.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
    [ 32.566329] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.566492] ata12.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
    [ 32.566526] ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 32.567782] ata8.00: configured for UDMA/133
    [ 32.569759] ata5.00: configured for UDMA/133
    [ 32.569893] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
    [ 32.570286] scsi 6:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
    [ 32.570502] scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 32.572474] ata10.00: configured for UDMA/133
    [ 32.572682] ata12.00: configured for UDMA/133
    [ 32.660017] usb 7-4: new low speed USB device number 2 using ohci_hcd
    [ 32.868292] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.0/input/input4
    [ 32.868415] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input0
    [ 32.881147] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/input/input5
    [ 32.881240] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input1
    [ 32.881304] usbcore: registered new interface driver usbhid
    [ 32.881338] usbhid: USB HID core driver
    [ 33.271305] scsi 12:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
    [ 33.280033] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 33.305314] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 33.305349] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 33.314972] ata9.00: configured for UDMA/133
    [ 33.315074] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 33.315323] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
    [ 33.315536] scsi 10:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
    [ 33.315746] scsi 11:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
    [ 33.333300] sd 11:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333360] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333415] sd 10:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333463] sd 9:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333524] sd 8:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333575] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 33.333613] sd 6:0:0:0: [sdb] 4096-byte physical blocks
    [ 33.333753] sd 10:0:0:0: [sdg] Write Protect is off
    [ 33.333787] sd 10:0:0:0: [sdg] Mode Sense: 00 3a 00 00
    [ 33.333950] sd 8:0:0:0: [sde] Write Protect is off
    [ 33.333984] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 33.334046] sd 9:0:0:0: [sdf] Write Protect is off
    [ 33.334079] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    [ 33.334138] sd 7:0:0:0: [sdc] Write Protect is off
    [ 33.334172] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 33.334224] sd 11:0:0:0: [sdh] Write Protect is off
    [ 33.334257] sd 11:0:0:0: [sdh] Mode Sense: 00 3a 00 00
    [ 33.334358] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334526] sd 6:0:0:0: [sdb] Write Protect is off
    [ 33.334561] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 33.334629] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334808] sd 12:0:0:0: [sdd] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
    [ 33.334865] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.334982] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335109] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335222] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.335777] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 33.335862] sd 12:0:0:0: [sdd] Write Protect is off
    [ 33.335896] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
    [ 33.336251] sd 4:0:0:0: [sda] Write Protect is off
    [ 33.336285] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 33.336346] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 33.336757] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.336792] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.339872] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.339909] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.344926] sdd: sdd1
    [ 33.347492] sd 12:0:0:0: [sdd] No Caching mode page present
    [ 33.347539] sd 12:0:0:0: [sdd] Assuming drive cache: write through
    [ 33.347574] sd 12:0:0:0: [sdd] Attached SCSI removable disk
    [ 33.376773] sde: sde1
    [ 33.377154] sd 8:0:0:0: [sde] Attached SCSI disk
    [ 33.377403] sdh: sdh1
    [ 33.377691] sd 11:0:0:0: [sdh] Attached SCSI disk
    [ 33.380652] sdg: sdg1
    [ 33.381033] sd 10:0:0:0: [sdg] Attached SCSI disk
    [ 33.395456] sdf: sdf1
    [ 33.395801] sd 9:0:0:0: [sdf] Attached SCSI disk
    [ 33.397545] sdb: sdb1
    [ 33.397930] sd 6:0:0:0: [sdb] Attached SCSI disk
    [ 33.435935] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    [ 33.436519] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 33.439473] mdadm: sending ioctl 800c0910 to a partition!
    [ 33.439519] mdadm: sending ioctl 800c0910 to a partition!
    [ 33.439696] mdadm: sending ioctl 1261 to a partition!
    [ 33.439728] mdadm: sending ioctl 1261 to a partition!
    [ 33.442061] mdadm: sending ioctl 1261 to a partition!
    [ 33.442108] mdadm: sending ioctl 1261 to a partition!
    [ 33.442467] mdadm: sending ioctl 1261 to a partition!
    [ 33.442502] mdadm: sending ioctl 1261 to a partition!
    [ 33.443944] mdadm: sending ioctl 1261 to a partition!
    [ 33.443981] mdadm: sending ioctl 1261 to a partition!
    [ 33.815407] sdc: sdc1
    [ 33.815744] sd 7:0:0:0: [sdc] Attached SCSI disk
    [ 33.819038] md: bind<sdg1>
    [ 33.823005] md: bind<sdh1>
    [ 33.830376] md: bind<sde1>
    [ 33.832743] md: raid0 personality registered for level 0
    [ 33.833265] bio: create slab <bio-1> at 1
    [ 33.833302] md/raid0:md127: looking at sdh1
    [ 33.833336] md/raid0:md127: comparing sdh1(3907026944) with sdh1(3907026944)
    [ 33.833414] md/raid0:md127: END
    [ 33.833446] md/raid0:md127: ==> UNIQUE
    [ 33.833478] md/raid0:md127: 1 zones
    [ 33.833511] md/raid0:md127: looking at sdg1
    [ 33.833554] md/raid0:md127: comparing sdg1(3907026944) with sdh1(3907026944)
    [ 33.833623] md/raid0:md127: EQUAL
    [ 33.833655] md/raid0:md127: FINAL 1 zones
    [ 33.833689] md/raid0:md127: done.
    [ 33.833733] md/raid0:md127: md_size is 7814053888 sectors.
    [ 33.833766] ******* md127 configuration *********
    [ 33.833798] zone0=[sdg1/sdh1/]
    [ 33.833947] zone offset=0kb device offset=0kb size=3907026944kb
    [ 33.833988] **********************************
    [ 33.833992]
    [ 33.835269] md127: detected capacity change from 0 to 4000795590656
    [ 33.838003] md: bind<sdb1>
    [ 33.842049] md: bind<sdf1>
    [ 33.844170] md127: unknown partition table
    [ 33.924815] md: bind<sdc1>
    [ 34.090011] raid6: int64x1 1791 MB/s
    [ 34.260030] raid6: int64x2 2819 MB/s
    [ 34.430025] raid6: int64x4 2663 MB/s
    [ 34.600019] raid6: int64x8 2518 MB/s
    [ 34.770025] raid6: sse2x1 5795 MB/s
    [ 34.940016] raid6: sse2x2 8139 MB/s
    [ 35.110014] raid6: sse2x4 10354 MB/s
    [ 35.110047] raid6: using algorithm sse2x4 (10354 MB/s)
    [ 35.110907] async_tx: api initialized (async)
    [ 35.111085] xor: automatically using best checksumming function: generic_sse
    [ 35.160010] generic_sse: 5798.000 MB/sec
    [ 35.160043] xor: using function: generic_sse (5798.000 MB/sec)
    [ 35.161180] md: raid6 personality registered for level 6
    [ 35.161216] md: raid5 personality registered for level 5
    [ 35.161249] md: raid4 personality registered for level 4
    [ 35.162194] md/raid:md126: device sdc1 operational as raid disk 3
    [ 35.162258] md/raid:md126: device sdf1 operational as raid disk 1
    [ 35.162302] md/raid:md126: device sdb1 operational as raid disk 0
    [ 35.162337] md/raid:md126: device sde1 operational as raid disk 2
    [ 35.162969] md/raid:md126: allocated 4272kB
    [ 35.164323] md/raid:md126: raid level 5 active with 4 out of 4 devices, algorithm 2
    [ 35.164368] RAID conf printout:
    [ 35.164401] --- level:5 rd:4 wd:4
    [ 35.164434] disk 0, o:1, dev:sdb1
    [ 35.164472] disk 1, o:1, dev:sdf1
    [ 35.164514] disk 2, o:1, dev:sde1
    [ 35.164547] disk 3, o:1, dev:sdc1
    [ 35.164615] md126: detected capacity change from 0 to 6000789159936
    [ 35.210084] md126: unknown partition table
    [ 37.116016] device-mapper: uevent: version 1.0.3
    [ 37.116160] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
    [ 48.147927] systemd[1]: systemd 194 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 48.148113] systemd[1]: Running in initial RAM disk.
    [ 48.148564] systemd[1]: Set hostname to <archboot>.
    [ 48.148763] systemd[1]: Initializing machine ID from random generator.
    [ 48.163323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 48.163530] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 48.163664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 48.163714] systemd[1]: Starting Remote File Systems.
    [ 48.164039] systemd[1]: Reached target Remote File Systems.
    [ 48.164095] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 48.164379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 48.164429] systemd[1]: Starting Delayed Shutdown Socket.
    [ 48.164734] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 48.164802] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 48.165217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 48.165268] systemd[1]: Starting Encrypted Volumes.
    [ 48.165538] systemd[1]: Reached target Encrypted Volumes.
    [ 48.165666] systemd[1]: Starting udev Kernel Socket.
    [ 48.165964] systemd[1]: Listening on udev Kernel Socket.
    [ 48.166045] systemd[1]: Starting udev Control Socket.
    [ 48.166338] systemd[1]: Listening on udev Control Socket.
    [ 48.166395] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 48.166498] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 48.166557] systemd[1]: Starting Swap.
    [ 48.166826] systemd[1]: Reached target Swap.
    [ 48.166869] systemd[1]: Starting Journal Socket.
    [ 48.167200] systemd[1]: Listening on Journal Socket.
    [ 48.167260] systemd[1]: Started File System Check on Root Device.
    [ 48.167303] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 48.168421] systemd[1]: Starting Load Kernel Modules...
    [ 48.170881] systemd[1]: Starting Setup Virtual Console...
    [ 48.173799] FS-Cache: Loaded
    [ 48.177917] systemd[1]: Mounting POSIX Message Queue File System...
    [ 48.179690] systemd[1]: Mounting Huge Pages File System...
    [ 48.180633] systemd[1]: Starting Apply Kernel Variables...
    [ 48.181486] systemd[1]: Started Set Up Additional Binary Formats.
    [ 48.181595] systemd[1]: Starting udev Kernel Device Manager...
    [ 48.184266] systemd[1]: Mounting Debug File System...
    [ 48.185010] systemd[1]: Starting udev Coldplug all Devices...
    [ 48.185722] systemd[1]: Starting Journal Service...
    [ 48.186733] systemd[1]: Started Journal Service.
    [ 48.187650] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 48.187720] systemd[1]: Starting Local File Systems (Pre).
    [ 48.187982] systemd[1]: Reached target Local File Systems (Pre).
    [ 48.188037] systemd[1]: Mounting /tmp...
    [ 48.188726] systemd[1]: Starting Load Random Seed...
    [ 48.199278] systemd-udevd[1369]: starting version 194
    [ 48.259482] RPC: Registered named UNIX socket transport module.
    [ 48.259519] RPC: Registered udp transport module.
    [ 48.259552] RPC: Registered tcp transport module.
    [ 48.259595] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 48.264576] FS-Cache: Netfs 'nfs' registered for caching
    [ 48.270453] systemd-modules-load[1361]: Inserted module 'nfs'
    [ 48.275596] systemd-journald[1372]: Received SIGUSR1
    [ 48.653395] scsi_verify_blk_ioctl: 184 callbacks suppressed
    [ 48.653431] mdadm: sending ioctl 1261 to a partition!
    [ 48.653475] mdadm: sending ioctl 1261 to a partition!
    [ 48.653686] mdadm: sending ioctl 1261 to a partition!
    [ 48.653725] mdadm: sending ioctl 1261 to a partition!
    [ 94.390769] r8169 0000:02:00.0: eth0: link down
    [ 94.390805] r8169 0000:02:00.0: eth0: link down
    [ 94.391909] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 96.827209] r8169 0000:02:00.0: eth0: link up
    [ 96.828288] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 107.460005] eth0: no IPv6 routers present
    and /proc/cpuinfo:
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 16
    model name : AMD A6-5400K APU with Radeon(tm) HD Graphics
    stepping : 1
    cpu MHz : 3593.482
    cache size : 1024 KB
    physical id : 0
    siblings : 1
    core id : 0
    cpu cores : 1
    apicid : 16
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rd

    itbane wrote:
    Sorry fore double-posting, but there's something new:
    At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
    ...sounds like a hardware problem to me given the sporadic nature.

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • What is the process for connecting ethernet.  Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left.  Note Airport wireless is working.

    What is the process for connecting airport extreme ethernet?  I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player.  The system preference network indicates "ethernet not connected" with red dot to left of this message.  The airport wireless works and has green dot to left of it.  The stereo receiver and blue ray player do not respond and give message not connect to internet.  Thank you.  /  cfpirate 

    It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
    After restarting, it worked.
    Thanks!

  • Disk Utility hangs ("not responding") when attempting to Repair Disk on Time Capsule sparsebundle.  Help.

    I am trying to improve the performance of my Time Machine backup and retrievals via my 2nd Gen. Time Capsule from my iMac Core 2 Duo hard drive with SL 10.6.8.  The incremental backups generally take 20 - 40 minutes each hour generally with fewer than 100 MB of data being backed up.  I have read through numerous threads on these forums about Time Capsule and Time Machine issues as well as the very helpful Pondini site (http://web.me.com/pondini/Time_Machine/Home.html) and have tried many other suggestions (listed below), but have been unable to attempt a Disk Utility repair disk on the Time Capsule sparsebundle file.
    After locating the sparsebundle 'file' in the finder under Shared/TC/Data, I am only sometimes able to drag the sparsebundle into the Disk Utility volumes and disk window.  About fifty percent of the time, Disk Utility hangs when attempting to drag in the sparsebundle.  If I am able to get it listed and click on "repair disk", then the beach ball begins to spin and nothing happens.  This occurs whether or not I first use AirPort Utility to "Disconnect All Users" from the Time Capsule.  I have given it over one hour to attempt the repair disk, but nothing happens, i.e., not a single message shows up in the detail window.  The beach ball just spins, and Disk Utility shows up in red as "not responding" under the Force Quit menu.
    Also note that on my new Macbook Air, Time Machine runs quite quickly via this same Time Capsule from my new Macbook Air using OS X Lion (which seems to indicate that the Time Capsule drive itself is OK).
    I would appreciate any tips on getting Disk Utility to run "repair disk" on my sparsebundle, as I seem to have exhausted most other options (see below) for improving Time Capsule performance -- aside of course, from wiping the Time Capsule clean and starting all over.... (which I really don't want to do, and from what I've read, has not helped some people who've tried this anyway).
    Many thanks!
    Although I would like to focus this thread on the Disk Utility / sparsebundle "Repair Disk" problem, I should mention that I have tried the following other things:
    1.  Repaired disk permissions on my hard drive
    2.  Used Disk Utility to run "repair disk" on my hard drive after starting up from a SuperDuper external backup
    3.  Run DiskWarrior on my hard drive, again, from a separate startup disk
    4.  Did the "full reset of Time Machine", a la Pondini Troubleshooting #A4
    5.  Changed my computer and Time Capsule names to simple short names with only alphanumeric characters and no spaces
    6.  Ensured that my Time Capsule is being accessed only via ethernet
    7.  Relaunched the finder
    8.  And finally, attempting to use Disk Utility to repair the sparsebundle - thus the nature of this post

    OK, no takers out there, but I answered my own question (sort of).
    The answer is that even though Disk Utility shows up as "not responding" under the Force Quit menu and appears to hang, it is actually still working.  A bit of patience shows that after about an hour, my Disk Utility was able to show the 1.44 TB Time Machine sparsebundle from Time Capsule in the disk window on the left hand side.  Once this appeared, I was able to click on "Repair Disk" (note that prior to doing this, I had to "Disconnect All Users" from my Time Capsule using the Airport Utility program; otherwise you will get a "could not unmount disk" error).  Again, the Repair Disk function appeared to hang Disk Utility as it showed up as "not responding" under the Force Quit menu.  However, after about 8 hours, Disk Utility did run the entire Repair Disk protocol on the sparsebundle.  The results DO NOT show up in the Disk Utility details window - so even if you are patient enough to let it complete, you will not see anything and may think that nothing happened.  However, you can find the familiar results of the Repair Disk function by looking on Console - find the "DiskUtility.log" under Files: ˜/Library/Logs.
    Unfortunately, I was hoping to find a problem that would have been subsequently repaired which would result in dramatically increased Time Capsule speed, but this was not the case.  Disk Utility showed everything to be "OK" and I am stuck with a very slow Time Capsule....
    (And of note, my new Macbook Air (OS Lion) Time Machine functions blazingly fast on both backup and retrieval to and from the very same Time Capsule - even though, these are occuring wirelessly via AirPort -- granted the size of this sparsebundle is an order of magnitude smaller at this point, i.e., only 10 GB right now)
    Would still be happy to hear of any similar experiences or tips on getting Time Capsule to work more quickly.

  • "Apple TV is not responding" [ATV1] after 10.7.3 upgrade

    Yesterday I purchased a movie on the Apple TV and then tried to sync it back to my Macintosh and got the error "Apple TV is not responding. Check that any firewall software running on this computer has been set to allow communication on port 3689." Having recently upgraded Lion to 10.7.3 I do not know if the root cause of this problem is Lion 10.7.3 or iTunes 10.5.3.
    I first verified that the Apple TV was working fine and then for good measure unplugged it and re-plugged it and it came up fine. It is connected via Ethernet, so I knew that the wireless network could not be the source of the problem.  I hadn't changed any security settings on my Mac recently, but to verify that the Firewall settings were not the problem I turned off the Firewall, and that still did not resolve the problem.
    Finally I was able to solve the problem from within iTunes by doing the following:
    - In iTunes right-click on the Apple TV icon in the sidebar under DEVICES to display the context menu.
    - In the context menu there should be an option to Transfer Purchases from "Apple TV". Select that option.
    - The recently purchased content on the ATV will then be transferred to the Macintosh. And after that you will be able to sync content back to the Apple TV again.
    Regards

    FCS 3 is working as usual for me, although FCP did re-profile the RT Extreme settings and took a couple of seconds longer to start up the first time after updating. What else have you installed or updated?
    I was also on the 10.7.3 beta. It did not change anything in the behaviour of FCS 3 there either.

  • My first generation AppleTV will not sync with iTunes anymore.  I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689"  firewall is off

    My first generation AppleTV will not sync with iTunes anymore.  I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689"  firewall is turned off.. Any ideas?

    Thanks Rudegar,
    I only synch and do not stream off of my 1st Gen AppleTV
    I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
    I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
    Will keep working on other fix options (factory reset, etc.)
    Thanks again

  • Network printer not responding

    Hello
    When I try to print from my MacBook to my Canon network printer, I get the error message "printer not responding", even the printer works fine with both windows notebooks connected to the same WLAN.
    I have a Canon MF8540Cdn printer connected with Ethernet to my router. The printer has the ip address 10.1.1.10, the gateway is 10.1.1.1 (Router IP) and the subnet mask is 255.255.255.0.
    Then I have three notebooks, one MacBook (IP 10.1.1.101) and two windows notebooks (a HP notebook (IP 10.1.1.102) and a Lenovo notebook (IP 10.1.1.103)). All three notebooks are connected wo the same WLAN using enterprise encryption.
    The two windows notebooks can print to the canon printer perfectly fine and have not havd any issues at all.
    However, from the MacBook I can not print since the upgrade to OSX 10.9.1 Mavericks. I have the latest update from Mavericks.
    So, I deleted the printer (settings - printer) and resetted the printing system and deleted the printer also in the folder "Library - Printers". Then I got the latest driver (version 10.2) from Canon and installed the driver (dmg file).
    Next I added the printer in the in the settings  as follows:
    1. Hit the "+" buttton to add a printer
    2. Select "IP"
    3. enter the ip address of the printer (10.1.1.10)
    4. Select "Line printer daemon"
    5. The system automatically detected the printer "MF8500 Series" and filled in the location.
    6. Add the printer
    When I open the printer options now, I can see the toner levels corretly, so the MacBook must have connection to the printer.
    In addition, I can open the printer web address in Safary by going to http://10.1.1.10 , this also works fine and I can modify settings too. So the IP connection is also fine here.
    But, when I print a document, PDF, Word, Safari,..., the system firs report "connecting to the printer" and after a while it states "printer not responding"!
    The printer seems not to get any info, as it does not start or show any error message.
    However, the two windows notebooks can print fine, and I tried to print from windows, then directly after print from the MacBook, or first MacBook then windows or both allone, wait 1 hour print from MacBook, then wait one hour and print from Windows.
    The result is always the same. The windows print fine, the MacBook does not print and reports printer not responding.
    If I check the log file on the MacBook, it shows the time and the job number and then printer not responding.
    Meanwhilte I deleted the printer aleready a couple times and also reinstalled the printer driver from Canon. On the Canon cummunity I also submitted a ticket, but everybody responded that the driver works perfectly fine.
    Any idea, where the problem could be?
    Thanks for any help,
    Rolly

    Select "Line printer daemon"
    Why are you doing that? When you select the printer in the Add dialog, the driver should be entered automatically. Does that not happen?

  • I keep getting a rainbow wheel and a message that say webpages are not responding

    Can someone help me?  I keep getting a rainbow wheel and a message that says webpages are not responding.
    Thanks,
    Eric

    All web pages or specific web pages?  Provide an example link.
    Does any other internet-related utilities work for you, e.g., mail?
    Do you have a little green dot in you Network preferences next to Ethernet or Airport, whichever one you are using?

  • IP Address or sender did not respond messages

    I am on Tiger and my mother in law is on Leopard, both are Macbooks. She is the only person I cannot video chat with. The errors come up either Invalid IP address or that I (when calling her) did not respond. On her end it says that I cancelled the connection. I thought it was her router, etc, but today I was at my folks (Leopard Macbook) and rang her for a video chat and it worked fine?! I can video fine with others with Leopard and Tiger, it is only her that it doesn't seem to want to work...any would would be awesome!! Thanks

    Tell us about how she connects to the Internet ?
    If she is wireless and Ethernet she can get this Problem
    AS can having a Modem that routes and a router both doing DHCP
    As Can using Parallels to run Windows and sharing the Mac Ip
    4:00 PM Saturday; March 1, 2008

  • My Airport Express in not responding

    I have Airport Express stable working for 3 months.I never turned it off.But in last days occured "interesting" problem.When I try to use it in the start of the day it is not responding.My network card cann't see it and if I try to "ping" a haven't got any answer.But after replugging it began work.And in the next morning a have the same situation.
    I did not make any changes to configuration.So as far as I understood the problem is in heating.Is this possible?
    Any help anybody can give would be appreciated.Thanks in advance.

    In order for AirPort Utility to be able to detect your AirPort Express you need to either be connected to the AirPort Express via WiFi or by connecting an ethernet cable from your computer to the Express.

  • Another ichat question:  user (me) did not respond redux

    Hi,
    I have been unable to invite a video chat with someone, getting the 'I' did not respond message. I have tried everything that I can think of:
    changing the port from 5190 to 443 (or whichever is recommended)
    turned off my firewall
    do not use a router
    adjusted QT settings to 1.5 mbps and bandwidth limit to NONE
    The person I am trying to connect with (on a PC using AIM) ends up having to invite me, which may or may not work on the 1st try. Also, when I do the invite, it immediately responds and goes to 'starting chat' and just hangs there for a while until I get the inevitable 'user (me) did not respond' with the option of reporting to apple, which I do everytime.
    I know that I had this problem before and did everything that was needed/recommended, which ended up working in the end, but I am baffled now. Any other ideas? They will be greatly appreciated!!!
    Have a good day!
    Greg
    imac 2.0 intel duo   Mac OS X (10.4.8)  

    Dave,
    I have a Scientific Atlanta DP2100 series as given through Comcast (my ISP). According to Comcast, once I hook everything up, it is set. I have recently reset it by simply unplugging everything, letting it sit for at least a minute, and then hooking it back up, power, ethernet and cable. It does it's little startup thing, and it theoretically should be good to go. I have talked to Comcast recently, due to internet lags and tv problems, and they have said that though there have been outages around my area (but not directly here), things look good on their end. A few grains of salt with that one!
    For some reason, when I try to access the modems settings via the dns address, it doesn't open that address, so that may be playing a part in it. I am not too knowledgeable on that, so if you have some ideas, that would be great.
    Thanks,
    Greg

  • Error: "Name" did not respond

    I'm having trouble connecting to my friend. I am on a powerbook g4 running OSX 1.3.9, she's using a new macbook with Tiger. I have the older version of iChat while she has iChat AV. When we try to either audio chat or video chat, it says that she didnt respond or i didnt respond, depending on who sent the invite.
    here is the error log:
    2007-02-01 15:13:15 -0500: SCREENNAME did not respond.
    Tried to send UDP SIP "invite" to the following IP addresses and ports:
    65.96.178.5:5060, 192.168.1.100:5060
    2007-02-01 15:18:38 -0500: SCREENNAME did not respond.
    Tried to send UDP SIP "invite" to the following IP addresses and ports:
    66.31.200.44:61719, 192.168.0.101:5060
    2007-02-01 15:39:35 -0500: SCREENNAME did not respond.
    Tried to send UDP SIP "invite" to the following IP addresses and ports:
    65.96.178.5:5060, 192.168.1.100:5060
    We've both opened the ports on our OSX firewalls, and I can audio chat with other people, but she cannot.
    Whats going on here?

    Here is the log she dug up:
    Date/Time: 2007-02-01 15:14:35.645 -0500
    OS Version: 10.4.8 (Build 8L2127)
    Report Version: 4
    iChat Connection Log:
    AVChat started with ID 3874793751.
    theregoesrok: State change from AVChatNoState to AVChatStateWaiting.
    0x182b4bd0: State change from AVChatNoState to AVChatStateInvited.
    0x182b4bd0: State change from AVChatStateInvited to AVChatStateConnecting.
    theregoesrok: State change from AVChatStateWaiting to AVChatStateConnecting.
    theregoesrok: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    0x182b4bd0: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    Video Conference Error Report:
    Video Conference Support Report:
    Video Conference User Report:
    Binary Images Description for "iChat":
    0x1000 - 0x17cfff com.apple.iChat 3.1.5
    (440) /Applications/iChat.app/Contents/MacOS/iChat
    0x761000 - 0x76afff com.apple.IOFWDVComponents
    1.9.0 /System/Library/Components/IOFWDVComponents.component/Contents/MacOS/IOFWDVComp onents
    0x1759000 - 0x17a9fff com.DivXInc.DivXDecoder
    6.0.5 /Library/QuickTime/DivX 6 Decoder.component/Contents/MacOS/DivX 6
    Decoder
    0x17bb000 - 0x17ebfff com.apple.QuickTimeIIDCDigitizer
    7.1.3 /System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/MacOS/Quick TimeIIDCDigitizer
    0x15add000 - 0x15c66fff com.elgato.mpegsupport EyeTV MPEG Support 1.0.4
    (build 35) (1.0.4) /Library/QuickTime/EyeTV MPEG
    Support.component/Contents/MacOS/EyeTV MPEG Support
    0x15cd8000 - 0x15d14fff com.apple.QuickTimeFireWireDV.component
    7.1.3 /System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/MacOS/QuickTim eFireWireDV
    0x15d20000 - 0x15d5cfff com.apple.QuickTimeUSBVDCDigitizer
    1.6.6 /System/Library/QuickTime/QuickTimeUSBVDCDigitizer.component/Contents/MacOS/Qui ckTimeUSBVDCDigitizer
    0x15d80000 - 0x15ed9fff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
    0x15f05000 - 0x15f5cfff com.apple.driver.AppleIntelGMA950GLDriver
    1.4.40
    (4.4.0) /System/Library/Extensions/AppleIntelGMA950GLDriver.bundle/Contents/MacOS/Apple IntelGMA950GLDriver
    0x15f63000 - 0x15f7ffff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLDriver.bundl e/GLDriver
    0x15f86000 - 0x15faafff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLRendererFloa t.bundle/GLRendererFloat
    0x16077000 - 0x16095fff com.digidesign.digidesign.DigiCoreAudioPlugIn
    7.3x62 (7.3d62) /Library/Audio/Plug-Ins/HAL/Digidesign
    CoreAudio.plugin/Contents/MacOS/Digidesign CoreAudio
    0x16186000 - 0x1618bfff com.apple.audio.AppleHDAHALPlugIn 1.2.4
    (1.2.4a21) /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bun dle/Contents/MacOS/AppleHDAHALPlugIn
    0x1633d000 - 0x16341fff com.apple.audio.AudioIPCPlugIn
    1.0.1 /System/Library/Extensions/AudioIPCDriver.kext/Contents/Resources/AudioIPCPlugI n.bundle/Contents/MacOS/AudioIPCPlugIn
    0x1635d000 - 0x16386fff com.apple.audio.SoundManager.Components
    3.9.2 /System/Library/Components/SoundManagerComponents.component/Contents/MacOS/Soun dManagerComponents
    0x167e4000 - 0x167e7fff com.apple.iokit.IOQTComponents
    1.4 /System/Library/Components/IOQTComponents.component/Contents/MacOS/IOQTComponen ts
    0x8fe00000 - 0x8fe49fff dyld /usr/lib/dyld
    0x90000000 - 0x9016ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901bf000 - 0x901c1fff libmathCommon.A.dylib
    /usr/lib/system/libmathCommon.A.dylib
    0x901c3000 - 0x90200fff com.apple.CoreText 1.1.1
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
    0x90227000 - 0x902fcfff com.apple.ApplicationServices.ATS 2.0.4
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x9031c000 - 0x90770fff com.apple.CoreGraphics 1.258.38
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x90807000 - 0x908cffff com.apple.CoreFoundation 6.4.6
    (368.27) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x9090d000 - 0x9090dfff com.apple.CoreServices 10.4
    (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x9090f000 - 0x90a02fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x90a52000 - 0x90ad1fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x90afa000 - 0x90b5efff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
    0x90bcd000 - 0x90bd4fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
    0x90bd9000 - 0x90c4cfff com.apple.framework.IOKit 1.4.6
    (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90c61000 - 0x90c73fff libauto.dylib /usr/lib/libauto.dylib
    0x90c79000 - 0x90f1ffff com.apple.CoreServices.CarbonCore
    682.15 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x90f62000 - 0x90fcafff com.apple.CoreServices.OSServices
    4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x91002000 - 0x91040fff com.apple.CFNetwork
    129.18 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x91053000 - 0x91063fff com.apple.WebServices 1.1.3
    (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x9106e000 - 0x910ecfff com.apple.SearchKit
    1.0.5 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x91121000 - 0x9113ffff com.apple.Metadata 10.4.4
    (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    0x9114b000 - 0x91159fff libz.1.dylib /usr/lib/libz.1.dylib
    0x9115c000 - 0x912fbfff com.apple.security 4.5.1
    (29002) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x913f9000 - 0x91401fff com.apple.DiskArbitration
    2.1.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x91408000 - 0x9142efff com.apple.SystemConfiguration
    1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x91440000 - 0x91447fff libbsm.dylib /usr/lib/libbsm.dylib
    0x9144b000 - 0x914c1fff com.apple.audio.CoreAudio
    3.0.4 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x91512000 - 0x91512fff com.apple.ApplicationServices 10.4
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x91514000 - 0x9153ffff com.apple.AE 314
    (313) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x91552000 - 0x91626fff com.apple.ColorSync
    4.4.8 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x91661000 - 0x916d4fff com.apple.print.framework.PrintCore 4.6
    (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x91702000 - 0x917abfff com.apple.QD 3.10.21
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x917d1000 - 0x9181cfff com.apple.HIServices 1.5.2
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x9183b000 - 0x91851fff com.apple.LangAnalysis
    1.6.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x9185d000 - 0x91877fff com.apple.FindByContent
    1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x91881000 - 0x918befff com.apple.LaunchServices
    181 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x918d2000 - 0x918defff com.apple.speech.synthesis.framework
    3.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x918e5000 - 0x91920fff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
    0x91932000 - 0x919e4fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x91a2a000 - 0x91a40fff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x91a45000 - 0x91a63fff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
    0x91a68000 - 0x91ac6fff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
    0x91ad8000 - 0x91adcfff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
    0x91ade000 - 0x91b5bfff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
    0x91b5f000 - 0x91b9cfff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
    0x91ba2000 - 0x91bbcfff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
    0x91bc1000 - 0x91bc3fff com.apple.ImageIO.framework
    1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
    0x91bc5000 - 0x91bc5fff com.apple.Accelerate 1.3.1 (Accelerate
    1.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x91bc7000 - 0x91c55fff com.apple.vImage
    2.5 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
    0x91c5c000 - 0x91c5cfff com.apple.Accelerate.vecLib 3.3.1 (vecLib
    3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
    0x91c5e000 - 0x91cb7fff com.apple.Accelerate.vecLib 3.3.1 (vecLib
    3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x91cc0000 - 0x91ce4fff com.apple.Accelerate.vecLib 3.3.1 (vecLib
    3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x91cec000 - 0x920f5fff com.apple.Accelerate.vecLib 3.3.1 (vecLib
    3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x9212f000 - 0x924e3fff com.apple.Accelerate.vecLib 3.3.1 (vecLib
    3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x92510000 - 0x9258dfff com.apple.DesktopServices
    1.3.4 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x925ce000 - 0x927fefff com.apple.Foundation 6.4.7
    (567.28) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x9290a000 - 0x929e8fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x92a05000 - 0x92af2fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x92b02000 - 0x92b19fff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
    0x92b24000 - 0x92b7cfff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
    0x92b90000 - 0x92b90fff com.apple.Carbon 10.4
    (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x92b92000 - 0x92ba2fff com.apple.ImageCapture
    3.0.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x92bb1000 - 0x92bb9fff com.apple.speech.recognition.framework
    3.6 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x92bbf000 - 0x92bc4fff com.apple.securityhi 2.0.1
    (24742) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x92bca000 - 0x92c5bfff com.apple.ink.framework 101.2.1
    (71) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x92c6f000 - 0x92c72fff com.apple.help 1.0.3
    (32.1) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x92c75000 - 0x92c93fff com.apple.openscripting 1.2.5
    (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x92ca5000 - 0x92cabfff com.apple.print.framework.Print 5.2
    (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x92cb1000 - 0x92d14fff com.apple.htmlrendering 66.1
    (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x92d38000 - 0x92d79fff com.apple.NavigationServices 3.4.4
    (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x92da0000 - 0x92dadfff com.apple.audio.SoundManager
    3.9.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x92db4000 - 0x92db9fff com.apple.CommonPanels 1.2.3
    (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x92dbe000 - 0x930b2fff com.apple.HIToolbox 1.4.8
    (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x931b8000 - 0x931c3fff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x931c8000 - 0x931e3fff com.apple.DirectoryService.Framework
    3.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x93233000 - 0x93233fff com.apple.Cocoa 6.4
    (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x93235000 - 0x938ebfff com.apple.AppKit 6.4.8
    (824.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93c6c000 - 0x93ce6fff com.apple.CoreData
    90 /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
    0x93d1f000 - 0x93dd7fff com.apple.audio.toolbox.AudioToolbox
    1.4.3 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x93e19000 - 0x93e19fff com.apple.audio.units.AudioUnit
    1.4.2 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x93e1b000 - 0x93fedfff com.apple.QuartzCore
    1.4.9 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x9403e000 - 0x9407ffff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
    0x94087000 - 0x940c1fff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
    0x940fd000 - 0x94145fff com.apple.bom 8.5
    (86.3) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
    0x9414f000 - 0x9418dfff com.apple.vmutils 4.0.2
    (93.1) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
    0x941d1000 - 0x941e2fff com.apple.securityfoundation 2.2.1
    (28150) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x941f0000 - 0x9422efff com.apple.securityinterface 2.2.1
    (27695) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x9424a000 - 0x94259fff com.apple.CoreGraphics 1.258.38
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x94260000 - 0x9426bfff com.apple.CoreGraphics 1.258.38
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x942b7000 - 0x942d1fff com.apple.CoreGraphics 1.258.38
    (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x942d7000 - 0x94590fff com.apple.QuickTime
    7.1.3 /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    0x946f1000 - 0x94837fff com.apple.AddressBook.framework 4.0.4
    (485.1) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x948c3000 - 0x948d2fff com.apple.DSObjCWrappers.Framework
    1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
    0x948d9000 - 0x94902fff com.apple.LDAPFramework 1.4.2
    (69.1.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
    0x94908000 - 0x94917fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
    0x9491b000 - 0x9493ffff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
    0x9494b000 - 0x94968fff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x9496f000 - 0x949d4fff com.apple.Bluetooth 1.7.9
    (1.7.9f12) /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
    0x94c93000 - 0x94d25fff com.apple.WebKit
    418.9 /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    0x94d7f000 - 0x94e01fff com.apple.JavaScriptCore
    418.3 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
    0x94e3a000 - 0x95119fff com.apple.WebCore
    418.21 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    0x95298000 - 0x952bbfff libxslt.1.dylib /usr/lib/libxslt.1.dylib
    0x9643c000 - 0x9643cfff com.apple.vecLib 3.3.1 (vecLib
    3.3.1) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x9691f000 - 0x96941fff com.apple.speech.LatentSemanticMappingFramework
    2.5 /System/Library/PrivateFrameworks/LatentSemanticMapping.framework/Versions/A/La tentSemanticMapping
    0x969b2000 - 0x96a80fff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
    0x96a9b000 - 0x96a9cfff com.apple.opengl
    1.4.12 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLSystem.dy lib
    0x96a9e000 - 0x96aa3fff com.apple.agl 2.5.9
    (AGL-2.5.9) /System/Library/Frameworks/AGL.framework/Versions/A/AGL
    0x96bee000 - 0x96beffff com.apple.MonitorPanelFramework
    1.1.1 /System/Library/PrivateFrameworks/MonitorPanel.framework/Versions/A/MonitorPane l
    0x9733d000 - 0x97426fff com.apple.viceroy.framework
    276.0 /System/Library/PrivateFrameworks/VideoConference.framework/Versions/A/VideoCon ference
    0x97b55000 - 0x97b57fff com.apple.DisplayServicesFW
    1.8.2 /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
    0x97d84000 - 0x9886efff com.apple.QuickTimeComponents.component
    7.1.3 /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents
    0x991cb000 - 0x991d6fff com.apple.IMFramework 3.1.1
    (427) /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
    0x991e0000 - 0x9934cfff com.apple.MessageFramework 2.1.1
    (752.3) /System/Library/Frameworks/Message.framework/Versions/B/Message
    Im not sure what her setup is, she lives in a rented house. I do know that she connects through a linksys wireless router and uses DSL, but other than that, I'm not sure. I'm on my school network, both plugged into the ethernet and connected to a somewhat spotty wireless connection, which is also part of the school network.

Maybe you are looking for