Ethernet option missing in Appletalk control panel

We recently picked up some Power Mac 5200/LC's to add to our existing Macs. Some of them have OS 7.5 and some have 7.6.1 but they all have ethernet cards. The ones with 7.6.1 have an option in the Appletalk control panel to select ethernet and work fine. The ones with 7.5 have no option for ethernet in the control panel. Do I need to upgrade the OS or is there some sort of driver that needs to be installed? Any ideas?

We recently picked up some Power Mac 5200/LC's to add
to our existing Macs. Some of them have OS 7.5 and
some have 7.6.1 but they all have ethernet cards. The
ones with 7.6.1 have an option in the Appletalk
control panel to select ethernet and work fine. The
ones with 7.5 have no option for ethernet in the
control panel. Do I need to upgrade the OS or is
there some sort of driver that needs to be installed?
Any ideas?
There are 2 reasons for this:
1. an Ethernet option doesn't show up because there is no ethernet card installed in the Macintosh
2. The card is installed but the Apple Ethernet drivers are not installed into the Extensions folder of the active Start up disk's System Folder.
Solution:
1.Verify that the Mac does infact have an ethernet card.
2. Verify that the Apple Ethernet drivers are installed.
these items should be inside the Extensions folder:
AppleTalk version 58.1.5
Apple Built-In Ethernet driver file version 1.0.1
Apple Ethernet NB driver file version 1.0.1
Apple Ethernet LC driver file version 1.0.1
Apple Ethernet CS driver file version 1.0.1
note; the LC driver for and LC Mac
NB is for Nubus Macs and CS is for the CS line of Macs.
Mac OS System 7.5 does not install all the drivers neccessary for every Mac to use an Ethernet card, Download and install "Network Software Access" here Downloads
or upr grade to Mac OS 7.5.3.
Open Startup Disk>Apple Extras>Network Software Selector. Be sure Open Transport is on and if you are using a router upgrade to OT 1.2.2 or later as 1.0 is not fully supported with all routers.
If the Ethernet card is not physically installed in the Mac when the Mac OS System Software is installed, then the installer will not bother installing the Ethernet drivers on an "Easy Install". With a Custom Install you can select these drivers or alternatively add the card then re-install Mac OS 7.5. and upgrade all the way to 7.5.5*
*Requires extensive downloading but is free from Apple's older download site
http://www.info.apple.com/support/oldersoftwarelist.html

Similar Messages

  • "Photos" option button in icloud control panel not working

    Photos option button in icloud control panel not working...it is not greyed out, and it is ticked, but clicking on it has no effect. Windows 8.

    luvsack wrote:
    DOES ANYBODY RESPOND TO THESE QUESTIONS EVER? I HAVE THE SAME PROBLEM AND CAN FIND NO ANSWER ANYWHERE! ANSWER THE **** QUESTION PLEASE!!!!!!!!!!!!!!!!!!!!!!!
    Windows 7 64
    Start your own thread, and please stop shouting, it is hard to read, and who wants that.

  • Bookmarks options button in icloud control panel not showing

    Hello,
    i installed icloud control panel version 3.1 for windows 8 and can't sync bookmarks with chrome. I installed the chrome extension, restarted, but keep the same only internet explorer shows and it can't be changed.
    Thanks for your help.

    There may be an electrical connection issue inside the printer, but it may also simply need a power reset.  I would advise trying to perform a Hard Reset on the printer.
    * Unplug unit while powered on
    * Unplug other end of power cord from the direct wall outlet
    * Wait 30 seconds
    * Plug unit back in for power
    As well, there is a document with steps to troubleshoot when a printer has a blank display.  The document is located here.  Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • InDesign CC - "Create App" option missing from Folio Builder panel

    I am using Windows 7, InDesign CC. 
    While watching a Terry White video I made an app along wth the tutorila All works fine in the Desktop Viewer. When it reaches the point of going to the "Folio Builder" panel mine does not have the "Creat App" option that Terry White has.  Is this because I have windows not
    Mac?

    Yes, a Mac is required to create DPS apps.

  • TS3989 Photostream not an option in iCloud in Control Panel on PC

    Why would photo stream be grayed out as an option in icloud on my 64 bit sony laptop?  I have two sony laptops linked to my itunes, the other is 32 bit, I have an ipad and an iphone.

    I will explain a little more about Windows:
    If you get the *.jnlp file via Internet Explorer, then the web server must return a MIME type of "application/x-java-jnlp-file" or web start probably will not work (I have not actually tried all possibilites).
    IE then looks up (I am pretty sure):
    HKEY_CLASSES_ROOT\MIME\Database\Content Type\application/x-java-jnlp-file
    Gets: Extension: .jnlp
    then
    HKEY_CLASSES_ROOT\.jnlp
    (Default): JNLPFile
    Content Type: application/x-java-jnlp-file
    HKEY_CLASSES_ROOT\JNLPFile\Shell\Open\Command
    (Default): blah\javaws.exe
    It then goes through these few more steps (I do not know the exact order but you get the idea) and launches javaws.exe anyway.
    Compare this to the simpler (but private) configuration of:
    HKEY_CURRENT_USER\Software\Netscape\Netscape Navigator\Viewers
    application/x-java-jnlp-file : blah \javaws.exe
    They both do the same thing, but Windows abstracts it out so that explorer.exe and iexplorer.exe are using the same information. Some people like it. Some people hat it. I am pretty blah about it, as long as I can understand it somehow and fix it when it breaks.

  • CS4 - In InDesign can I change the Control Panel????

    I have recently upgraded to InDesign CS4 and I'm finding that my Control Panel does not match the one I used in CS3. Is there a way of adding tools to the Control Panel? Or changing the Control Panel?
    For example when I have text selected the Character Formating Controls offer: font, font size, leading, some options like superscript & subscript, alignment, indents, space before & after, drop cap, bullet list & number list. When I switch over to the Paragraph Formating Controls I get the exact same items just in reverse order. How do I add kerning, horizontal scale, the hyphenation box, and more. I'm noticing similar issues when I have an object selected, where is my "fit frame to" options?
    It seems with CS3 I had so much more available, is there any way to get CS4 to be set up in the same way?

    More options appear on the Control panel if you choose the Advanced workspace instead of Essentials. Choose Window > Workspace > Advanced.

  • No Control Panel? Windows 8.1

    Hey,
    I just upgraded to windows 8.1 pro 64bit but i don't get the option to install the control panel.
    Sound card: PCI Express X-Fi Titanium Fatal1ty Pro Series
    I installed these drivers:
    Creative Sound Blaster X-Fi Titanium stuurprogramma (for windows 8.1)
    Creative ALchemy 1.45.01
    On windows 7 64bit i didn't have this problem.
    I just had to install this driver:
    Creative Sound Blaster X-Fi Titanium stuurprogramma 2.17.0008
    And during the installation i got the option to install like 8 different programs to install for my soundcard including the Control Panel wich i pretty much only care about
    For the windows 8.1 driver i got the option to only install 3 programs in installed them all but no control panel.
    driver.jpg
    I dont understand this, did they not make a control panel for windows 8.1?
    Thanks allot!

    Originally Posted by dylan1990
    Hey,
    I just upgraded to windows 8.1 pro 64bit but i don't get the option to install the control panel.
    Sound card: PCI Express X-Fi Titanium Fatal1ty Pro Series
    I installed these drivers:
    Creative Sound Blaster X-Fi Titanium stuurprogramma (for windows 8.1)
    Creative ALchemy 1.45.01
    On windows 7 64bit i didn't have this problem.
    I just had to install this driver:
    Creative Sound Blaster X-Fi Titanium stuurprogramma 2.17.0008
    And during the installation i got the option to install like 8 different programs to install for my soundcard including the Control Panel wich i pretty much only care about
    For the windows 8.1 driver i got the option to only install 3 programs in installed them all but no control panel.
    driver.jpg
    I dont understand this, did they not make a control panel for windows 8.1?
    Thanks allot!
    Hi dylan1990,
    You may want to reinstall the drivers again. From the details section, it did mention that the driver includes Creative Audio Control Panel in Win 8.1.
    Hope the suggestion works for you.

  • Non-functional Java Control Panel Refuses to Disable Updates

    Hope this is the right place to post! I cannot disable updates for Java, nor change any options inside the Java Control Panel. I make changes, click OK or Apply, open it back up and find they are all unchanged. This is on Vista Home Premium, SP2, Administrator account. No where in the process is elevation requested, the UAC is on however. Does anyone have any ideas on how to correct this?
    Java 6 Standard Edition: Version 6, Update 15, build 1.6.0_15-b03.

    Thanks Assaf, while the run as admin does not show up in the Control Panel I did manage to setup a shortcut with target: "C:\Program Files\Java\jre6\bin\javaw.exe" -Xbootclasspath/a:"C:\Program Files\Java\jre6\bin\..\lib\deploy.jar" -Duser.home="C:\Users\*user*" com.sun.deploy.panel.ControlPanel that starts in: "C:\Program Files\Java\jre6\bin" which enabled me to access the run as administrator and that did change the setting correctly. Phew, thanks for the idea!

  • Unspecified error when trying to access Control Panel

    I am currently setting up Remote Desktop Services on Server 2012 and I have enabled the policy
    "Prohibit access to Control Panel and PC settings".
    When a user clicks on the Control Panel icon, or anything else that points to Control Panel (Screen Resolution, Personalize) they get the normal error of
    "This operation has been cancelled due to restrcitions in effect on this computer. Please contact your system administrator" which is fine and is expected, but they then get the error,
    "Unspecified error".
    Does anyone know how to fix this?

    Hi Tom,
    Have you enabled the option to display "Personalization" in Group Policy?
    This is because "Personalization" option is linked to Control Panel, so if you prohibit access to control panel, and right click on the desktop select "Personalize", it results in the "Unspecified Error".
    Checkout the below thread on similar discussion,
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/76c3f7aa-9189-461e-be4d-5d8af133b151/windows7-explorerexe-generates-unspecified-error-when-trying-to-access-personalize-in-display?forum=winserverGP
    Regards,
    Gopi
    JiJi
    Technologies

  • ICloud 3.0 Control Panel for Windows - Non-IE Bookmark Sync

    FYI
    The new iCloud Control Panel for Windows 3.0 offers bookmark sync with Chrome and Firefox
    I could not get the new iCloud Control Panel for Windows 3.0 to recognize bookmark sync for any browser except IE. I downloaded the Firefox add-in and enabled it but it would not show Firefox bookmark sync as an option.I tried deleting and reintstalling both the iCloud Control Panel and Firefox.
    I finally solved the issue and got it work when I removed the additional profiles for Firefox.
    Check your (windows) Firefox profile at:
    users/yourusername/app data/roaming/mozilla/profiles
    Once I deleted the additional profile and restarted Firefox and the iCloud Control Panel I was able to select Bookmark sync with Firefox or Chrome.
    I hope this helps others that could not enable this option.

    Hello Todd,
    I too have the same problem (I can not display the "Options" button on the control panel, therefore I can not synchronize)
    I looked in the profiles of Mozilla Firefox, but unfortunately I have only one profile (default profile)
    How do I solve the problem?
    Thank you very much
    Maurizio

  • ICloud control panel for Outlook not working

    The panel of iCloud tomsyncronise on outlook doesn't work. It not appear in control panel.
    Thank you

    I don't really know what you mean by 'tomsyncronise'. Are you saying that you can't check Outlook from the Control panel? Did you install Outlook 2007 or 2010? The Control panel does not support Outlook Express.
    or are you saying that the Outllok checkbox is missing from the Control panel?

  • Why doesn't photo stream for iCloud control panel allow network drives?

    I have just installed the iCloud control panel for my PC and was very excited about the possibilities that it would open up for my numerous i-devices and large photo library. The simple setup works just fine by putting my photo stream files into the default 'My Pictures' folder. Unfortunately, that is not where I keep my pictues, they are all organized on a mapped network drive (local network). The photo stream options in the iCloud control panel do not allow me to select a network drive as a storage location.
    Is the inability to select a network drive for storage a deliberate decision or is this a bug?

    I am experiencing the same problem
    This is really frustrating!  What is the technical difficulty in making this available?  This disables all users who use NAS from using Photo Stream.
    What a huge oversight.

  • [CS4] Control Panel additions

    I've been playing with Illustrator CS4 on a laptop so the Control Panel has
    been under scrutiny.
    Still missing are the Align>Distribute Space buttons. If these were added I
    wouldn't need to have the Align Panel constantly open.
    Another welcome addition would be Paragraph and Character Style pop-ups.
    And Overprint toggle buttons for fill and stroke too, please - pulsating if
    overprint applied to non-100%K, shrieking if overprint applied to white (user
    preference setting, needless to say).
    Michael
    mhphillips at gmail dot com

    On Sun, 2 Nov 2008 15:32:26 +0000, [email protected] wrote:
    > In CS3, there is a flyout menu button at the far right end of the Control
    > Panel. From it, you can select Align, and the Align/Distribute buttons
    > appear. Are you saying that has changed in CS4?
    No, James, it's exactly the same as CS3. The last two buttons in the Align
    Panel (Vertical Distribute Space and Horizontal Distribute Space) are missing
    from the Control Panel.
    It's actually better on a laptop where the screen isn't wide enough to
    display the Align buttons in the Control Panel. You get an Align Panel pop-up
    instead.
    Michael
    mhphillips at gmail dot com

  • Windows 8 - "Make Available Offline" option missing. Went to Control panel- Sync Centre clicking "Manage offline files" Does nothing.

    Hello I am running Windows 8 Single Language Edition.
    I tried to Make a NAS folder available offline by right clicking on the folder. But   "Make Available Offline" option is missing.
    Then went to Control Panel->Sync Centre clicking "Manage offline files" does nothing.
    How to fix my issue?
    Thanks,
    Simon Mandy

    Hi Simon,
    Regarding to this issue, please refer to this article:
    User Cannot Make Files and Folders Available Offline
    http://technet.microsoft.com/en-us/library/cc978347.aspx
    Please also check if Offline Settings is enabled from NAS folder. Folder-> properties -> Advanced sharing on sharing tab -> Caching.
    Hope this could be helpful. Keep post.
    Kate Li
    TechNet Community Support

  • Computer crashing and nvidia control panel missing options

    Hey, I bought 2x msi gtx 970 and put them in sli mode. They worked fine for a while but yesterday I started having problems. I was playing shadow of mordor and suddenly my screen went black and my computer restarted. It worked fine afterwards tho. Then today I played some LoL and after playing for like 15 minutes or so it happened again. But now also after the computer restarted my nvidia control panel was missing options. There were only setup g-sync, set up stereostopic 3d and view rating for games. I'm not sure if this happened yesterday too. I tried reinstalling the drivers (tho I'm not 100% sure I did a perfectly clean install) and the options came back but the crash happened again and the options disappeared also again. I have 850w corsair tx850 so I think that should be enough power? My mobo is asus P8Z77V-Deluxe and cpu intel i7 3770k @ 4.3ghz. So what is the problem?
    EDIT: after I restarted my computer again the options in the control panel reappeared
    EDIT2: I ran furmark with both sli on and sli off for about 50 minutes and oddly enough my computer didn't crash. Everything ran well. Here's some statistics from sli: GPU1: 1316MHz @ 99% load, temp 80 C, voltage 1.193V, GPU2: started at 1303MHz and then dropped to 1277MHz @ 97% load, temp 62 C, voltage 1.206V. Another weird thing is that the crashes in lol kept happening even after this and always around 15-20 mins to the game. I would say it's an issue with lol but it happened once with shadow of mordor too. I haven't played any other games. Also it's weird that this started happening only recently, not from the beginning. I do recall downloading some update to geforce experience recently, don't know if that matters.
    Also I'd like to know that are those temperatures normal for air cooling in sli and/or are they too high?
    EDIT3: Just noticed that everytime I try to run pci-express render test on gpu-z my computer crashes instantly and apparently trying to run furmark now also crashes the computer

    Quote from: Nichrome on 16-October-14, 00:56:09
    Hello,
    Could you please be more accurate on your spec: >>Posting Guide<<  RAM, frequencies, timings and so on.
    Would be worth trying bit more powerful PSU. Not saying this one is insufficient, but it's always best to rule something out for 100% sure.
    Remove OC from the CPU and RAM (RAM to be 1333MHz and CPU to run stock). Or try >>Clear CMOS Guide<<
    Make sure that you're running latest BIOS for the motherboard <Contact ASUS about it>
    Temps are completely fine for SLI on air. Top card always is much hotter than the other. However you could reapply thermal paste on both cards, run single card for 1h and record its temps, then do the same for the 2nd card (in single card mode so the other is out of the PC) and use the cooler one on top.
    I feel so dumb right now. Seems like one power cord from the psu to my gpu wasn't properly attached and now that it's completely connected everything seems to work. I'll update this thread if that didn't fix the problem. But anyways thanks for your fast response

Maybe you are looking for

  • GL Account Key displays Chart of accounts concatenated with GL Account

    Hi, When we pull the GL Account Key object into a WEBI report, the Chart of Account value is concatenating with the GL Account number like ABDA/253616. In Bex Query, choosing the Chart of accounts and GL Account in the Analyser gives only the number

  • Using Indian language (Mangal) font for ePub in InDesign CS6?

    Hi, I created one Indian language epub in Indesign CS6 wiht "mangal font". See correct file for your ref. But when I set text in Indesign & export that document for ePub & check in Adobe Digital Edition. I saw one character has missing. see below ima

  • Extract() problem in Enterprise manager

    OEM issues queries like the following one in several places: /* OracleOEM */ SELECT c.extract('/element/@name', 'xmlns="http://www.w3.org/2001/XMLSchema"').getStringVal() FROM  table(xmlsequence(( SELECT  s.schema.extract('//schema/element') from dba

  • Click & drag stops and restarts further away

    When I click and drag, either to move a window, a file or to select text, the thing I wanted to drag loses selection and something else along the path of the cursor is selected. So if I try to drag a window it doesn't and drags another window instead

  • How did I get 25 lines on my Pages document?

    I am writing a reference page for APA 6th edition and my document has to have one inch margins with a header at the top and have 25 lines per page.... I don't know how to go format that on Pages.