Ethernet Plugs DO NOT CLICK into place!

Hello.
I just bought a brand new iBook at an Apple Store today and it's great... but I plugged an ethernet cord into the ethernet port and the plastic end does not click into place... I tried multiple cords from different makers that I know work in other devices... The port does not look faulty but maybe it is, I'm not sure.
Anyone else ever have this kind of problem with their MacBook?
Any help would be appreciated, thanks!

CINEMAnGUY: If you ethernet cable is the type with the rubber/plastic sleeve on the back of the connector, you might try sliding it back to prevent it from hitting up against the MacBook jack. These sleves are more of a pain in the * than anything else/\. Good Luck

Similar Messages

  • Lightening connector will not click into place on iPhone 5

    The lightening cable plug won't go in to my iPhone 5 port I.e. It does not click into place so am unable to charge the phone
    HELP I DONT HAVE AN APPLE DTORE IN MY COUNTRY ,!

    Apple was very kind they replaced my phone even though it was 3 days over warranty period. They found sum junk inthe lightening socket.
    Every one please try and clean the socket and try to keep it funk free

  • My ink cartridge will not click into place

    When I went to replace my ink cartridges yesterday the back ink wil not click into place. I am putting it in the proper way and everything looks normal to me. Please help! I have a c4280 all in one.

    Which printer model do you have?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Should the MacBook Mini Dvi adaptor click into place?

    I had a 2007 white Macbook, which the Mini Dvi adaptor clicked firmly into the port on the MacBook. I then replaced it with a 2008 white Macbook, and the same adaptor doesn't click into place, it's just held in by friction and looks like it wants to fall out all the time.
    A similar problem has been posted recently for a Mac Mini:- http://discussions.apple.com/thread.jspa?messageID=10393614
    Does anyone know whether Apple changed the design of the port at some point so it no longer clicked into place, or whether it is a fault which could be repaired under Applecare?

    I have an early 2009 White Macbook and my adapter definitely clicks into place. Maybe you have a faulty female socket on theMacbook, cannot seeing them change to be honest, I think there is only 2 types of adapters.
    Paul

  • My headphones are not clicking into my ipod touch 4g 64gb port, and are causing it to pop out at the smallest movement, how can i fix it?

    basically it's been a problem for a while now my sennheiser headphones are not clicking in correctly and are popping out at every movement causing it to pause my music, (very annoying) but it works fine if i hold it in, but can't do this all the time.I dom't know what the problem is or how i can fix.
    any help would be greatly recieved
    regards
    PD

    If it happens with another set of headphones then the headphone jack in the iPod needs replacing.  Apple will only exchange your iPod for a refurbished one for  this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like this one is less expensive. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Ink cartridges do not snap into place

    I am trying to change out the cartridges in my deskjet F4235 and neither cartridge snaps all the way back into place. Does anyone have any experience with this problem?

    Hi Sailor86,
    Please refer to the following link This should help with inserting the cartridges. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01367400&tmp_task=prodinfoCategory&lc=en&dlc=es...
    Also make sure you have the correct supplies following this link
    https://h30042.www3.hp.com/SureSupply/
    Hope this helps. if so please give Kudos!
    Although I am an HP employee, I am speaking for myself and not for HP

  • Hi guys, Having a problem with emoji. I have the emoji on my dock which I found a shortcut on Cult of the Mac. I click on the emoji and drag it to my email or whatever, and it will not drop into place. There is a blue square. Other shortcuts don't work.

    Hi Guys,
    Having problem with emoji, I have the character palette shortcut on my dock which I found through article from Cult of the Mac. I click on the emoticon and drag it to my email or whatever and get a blue box - no emoji. I tried the keyboard shortcut - doesn't work. I tried the drop down the menu in edit - doesn't work either. I am running Lion and want to upgrade to Mountain Lion. Want to fix this before I upgrade or should I just upgrade and hope for the best?  Been all over the net looking for solution.
    Thanks for your help,
    blueheron11

    Pages does not support the Apple font used for color emoji, so that behavior is normal.
    With what app are you reading the yahoo mail?  There is really no guarantee than any other email service will show the special Apple font involved.
    You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
    You should also be able to upload graphics here easily by clicking on the camera icon.  My email is tom at bluesky dot org.

  • HT201269 Is there a right, and wrong way to plug the lightning connector into the phone?

    The lightning connector dosen't want to plug into the slot and I don't want to force it, ... is there a right and wrong way to do this bisic and simple step?  Thanks

    No, it is a reversible plug. Either way is fine.
    Just make sure you plug it in straight until it "clicks" into place. It may take a bit of force if new, but check there's nothing in the port first.

  • When I import my photos from my iPhone 4S into iPhoto the location does not appear.  I have to open the info button on the photo click "photo place" then "find on map" and then the location appears.  How to I get the location to appear automatically?

    When I import my photos from my iPhone 4S into iPhoto the location does not appear.  I have to open the info button on the photo click "photo place" then "find on map" and then the location appears. How to I get the location to appear automatically when I import my photos from my iPhone?

    in your iPhoto preferences is look up location set to "automaticaly"?
    LN

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • So, I'm getting an error message when I plug my iPhone 4 into my computer.  It says,  "This iPhone cannot be used because the Apple Mobile Device Service is not started."

    Hello People!
    I'm getting an error message when I plug my iPhone 4 into my computer.  It says, "This iPhone cannot be used because the Apple Moblie Device Service has not been started."  What does this mean?  I've never had this error before.  It's also giving the same message with my iPod touch.  Please help!
    Thanks,
    DanaGal

    You can easily check whether you've the Apple Mobile Device in your computer. 
    Right click 'My Computer' , then Manage => Services and Applications => Services.  Apple Mobile Device is listed in alphabetical order.  If none, it means you've not download iTunes into your computer yet.  If yes, please ensure the Apple Mobile Device is in 'Started' status.
    Good luck

  • My home button is not popping back into place after pressing it

    My home button is not popping back into place after pressing it. Thus a double click is nearly impossible. It takes a while until it is back in place and i can press it again. Anything I can do? May that because of dirt in the ultrafine gap between glass and button?

    bring your phone into Apple for evaluation

  • I just downloaded more then 2000 photo's from my camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore

    I just downloaded more then 2000 photo's from my NIKON camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore!! Help where are they? How can I retrieve them or are they lost???
    Please help me!!!

    Do you see more photos, when you enable "Hidden Photos" in the "View" menu?
    And that was afetr I took the connection with the NIKON out of my laptop.
    Check, if you really imported into your iPhoto library - is the preference setting "Advanced > Importing: Copy items to the iPhoto Library" active?  If not, connect your Nikon again - do you now see more photos?
    If you imported into the iPhoto Library, check inside the package:
    Select your iPhoto library in the Finder, ctrl-click it, use the command "Show Package Contents".
    There will be a folder named "Masters" inside, with subfolders named by year - month - day. Look for the date you did the import and check, if the photos are inside.
    If yes, copy this folder to a folder on your desktop to save the photos.
    If not, search for a folder "Importing" inside the library. Is it there? Then copy these photos to a folder on the Desktop.
    If you found your photos, backup and rebuild your library.
    See Old Toad's post here:  Rebuild iPhoto Version 11

  • Problem establishing login screen when ethernet plugged into NetComm NB5Plu

    Problem establishing login screen when ethernet plugged into NetComm NB5Plus4
    I get a flashing folder that does not allow the login page to appear.
    If I remove the ethernet connection then boot-up the system establishes the login page and I can plug the ethernet back in and the system logins in.
    Where should I look to identify the problem, I am thinking it is the OS X install.
    Regards
    Si

    Hi hoydj,
    It might be a driver problem. Check out this FAQ from Wacom's Knowledge Base:
    http://www.wacom.com/faqs/knowledge_search.cfm?id=335

Maybe you are looking for

  • Error while refreshing webi report

    SAP BO XI 3.1, when i am trying to refresh data in a webi report, its giving error, Invalid prompt definition contact BO admin WI 00005. Though i deleted all filters in Bex query, save the query, import universe, refresh univerese, save universe, exp

  • Javascript array ;Add and remove elements without using push and pop

    Hi  I need to perform add and remove  operation in Javascript with following scenarios i) Add element, if element does not exist in array(javascript) ii) Remove element, if element exist in array(javascript) Without using push and pop method how to a

  • Reversal of Reversed Outbound Delivery

    SAP Gurus, Is it possible to reverse a Reversed Outbound Delivery? I mistakenly used a wrong document date and want to repost a reversed outbound delivery document with a correct date. Thank you, Pravin Ambardekar

  • Master data table error in PC

    Hi Gurus i am trying to run a data transfer process for BPARTNER but when i do it it gives me an error...that master data table is already locked..how to go about resolving it..points not an issue

  • Business rules execution error

    Hi, I am facing an error with business rules and forms. We are having 6 folders and each folder relating to different departments and each department (folder) contains 5 forms. The same environment is in UAT server and Production server. The same UAT