Ethernet printer no longer available after upgrading Airport

I had an older Airport wired into a router. An older ethernet printer was also wired into the router. I was able to print from various computers on the wireless network with no problem.
Today I upgraded my dying Airport with a new Airport Express. I am connected to the router and the internet with it from the various computers, but I can no longer print. Nothing else changed. My Mac tells me "printer not responding".
I checked to make sure Appletalk was on. The printer has a fixed IP address, 192.168.0.5, its an older printer and that's the only way I can network it. That never stopped me from printing before. I haven't changed any other settings and don't understand why the Airport would keep me from accessing a printer on the network.
Is it some kind of security setting?
Help!

Ensure that the Airport Express is configured to not distribute IP addresses.

Similar Messages

IBook Ethernet Network no longer working after upgrade to 10.2

This is really strange but i was using ethernet on os 9 and the dhcp server from my speedtouch router came up and everything worked fine. But yesterday i upgraded to os x 10.2 and the ethernet connection no longer works. I have tried unplugging (this usually works with pc crap) and restarting both the ibook and the router. I know that the router is working fine as i am using the same lead on my powerbook to get internet. Here are the ibook specs:
Indego 366mhz (not firewire model), no airport installed and only has ethernet, usb and modem connections. Any help would be appreciated.

1.) Download all OS X 10.2.x updates from software updater.
2.) After all updates are installed, check system profiler to ensure that your network card is detected and operating properly.
3.) Check for updated drivers for your specific network card.
4.) Verfiy and repair permission in OS X, and if possible download Onyx to execute maintenance and cleaning commands.
After all these steps, there should be no more problems.
Good Luck

5GHz channels no longer available after upgrading to 10.7.3

I'm currently using Late-2009 iMac and for some reason after upgrade to 10.7.3 I couldn't connect to any 5GHz network at all. In the System Profiles, Wi-Fi menu now says:
Interfaces:
en1:
Card Type:          AirPort Extreme (0x168C, 0x8F)
Firmware Version:          Atheros 9280: 4.0.61.4-P2P
MAC Address:          04:1e:64:ec:f6:e2
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
which now lacks the upper channels previously supported (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165); I wonder if this is intentional, if so, for whatever reason did Apple decided to disable 5GHz support for this particular build (which previously worked flawlessly)

Interesting. If you can still connect via wired (or 2.4GHz wireless), I would download the 10.7.3 combo update from apple support and reapply it. It appears the driver and family did not fully install with the update.
You can get the update here:
http://support.apple.com/kb/DL1484
If you re-install the combo update and you still do not have 5GHz channels, please open the System Information tool and post all of the text you see on the right for WiFi. E.g.:
Software Versions:
CoreWLAN:          2.1.2 (212.1)
CoreWLANKit:          1.0.2 (102.2)
Menu Extra:          7.0.2 (702.1)
configd plug-in:          7.1.2 (712.1)
System Profiler:          7.0 (700.3)
IO80211 Family:          4.1.2 (412.2)
WiFi Diagnostics:          1.0.1 (101.1)
AirPort Utility:          6.0 (600.92)
Interfaces:
en1:
Card Type:          AirPort Extreme (0x168C, 0x9A)
Firmware Version:          Atheros 9380: 4.0.61.4-P2P
MAC Address:          10:9a:dd:9e:a9:96
Locale:          FCC
Country Code:
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:          Supported
AirDrop:          Supported
Status:          Network Service Inactive

Printer no longer works after upgrading to Maverick

I have an Epson TX810FW, multifunction printer/scanner. It wwas working fine until I updated to Mavericks. I now get a message that the scanner function is not supported and I cannot get the printer to work. I need both working, and I have loaded all the latest updates from Epson up to 2.15.1.
Can someone provide an answer that will restore the mrinter to fully operational? Otherwise, how can I reomve Mavericks, as the loss of functionality is more of a downside than any enhancements that Mavericks might claim.

Hi,
I've been experiencing a similar issue with my old, yet working until Mavericks update, OKIPage 14ex. No problem at all with both Lion and Mountain Lion but after Mavericks update the printer cannot print any longer. The printer is connected via a regular USB port, the system recognizes it, I can send a print to its queue but as soon as the print is enqueued the printer goes into hold status and nothing can be done to resume the print.
Since the printer model is quiet old, no driver is avaliable from OKI support, however I'm wondering what Apple did with this update thus being able to produce such a mess.
Of course I tested the printer conncted to another PC and it perfectly works!
I would really appreciate some advice in order to restore the previous situation.
Many thanks.
Marco

Transport via CMS (Java stack) no longer available after upgrade to sp 14

Hello
Recently we have upgraded our SAP-XI (SAP NetWeaver 2004s) up to service pack 14.
Since then the CMS is no longer available on the Java stack. Exporting objects is only possible using the File System.
When we try to release change lists for CMS transport we get the following errors:
#8 10:22:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
Has anybody experienced similar problems with service pack 14 and has found a solution to "reactivate" the CMS? Might it be an authorization problem (UME)?
Regards
   Uwe
Appendix: Entire ErrorLog
#8 10:22:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy8.releaseChangelist(Unknown Source)
     at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseChangelist(TransportServiceDelegate.java:219)
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:192)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#7 10:22:41 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#6 10:22:41 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
#5 10:22:41 [AWT-EventQueue-0] FINE AutoLog.created.java.lang.AbstractMethodError: java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy8.releaseChangelist(Unknown Source)
     at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseChangelist(TransportServiceDelegate.java:219)
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:192)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#4 10:22:41 [AWT-EventQueue-0] DEBUG AutoLog.created.java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
#3 10:22:13 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
     at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
     at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
     at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
     at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
     at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:154)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#2 10:22:13 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
#1 10:22:13 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
     at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
     at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
     at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:150)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#0 10:22:13 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information

Hello Lieselot
The upgrade of our SAP-XI was done by an external company. Therefore I cannot tell you the detailed procedure.
However, you should search the Service Marketplace for patches of support package 0014 (there should be at least one patch around).
If I remember correctly patching was required on both ABAP and Java stack.
Regards
Uwe

Shared HP 6L printer no longer works after upgrade to Mavericks

Prior to upgrade was able to share old HP Laserjet 6L with another Mac....believe driver was Gutenprint 5.3xx.... Have not been able to find new driver to make printer work...Any sugestions on how to resolve issue...short of buying a new printer...althought it is probably time. Thanks

I tried several times to delete and add printer.Gutentenprint not an option to select defaults to Generic Postscrit Printer.
When I deleted and re-added my HP (which is connected by ethernet), where the default "Use: Generic Postscript" showed up, "Select Software" is an option in the pull-down menu. That gives all the Gutenprint choices.

IPhone Backup from Sept no longer available after upgrade to iTunes 11?

I needed to restore my contacts from an iTunes backup from 9/21/12. The Apple Care rep I was dealing with suggested that I backup up the phone Now, 9/7/13, to get a current backup. Restore to September, sync the contacts to iCloud and the restore the phone back to Now.
Seemed like a good plan, except iTunes wanted to upgrade v11. I did. After the NOW backup, I realized that the backup to 9/21 was not viewable in iTunes as a restore option......
I worked with another Apple Care rep who had me Show All hidden files on the computer, then we can see the User \ Library\ Application Support \ Mobile Sync\ "saome wacky file name" \ and I see a bunch of files which are dated either 2/7/2013 or 9/21/2012 (most are 2/7/2013).
Is there anyway to get iTunes v11 to recognize the 9/21/2012 files as a backup? Are these files still viable to restore from?

Hi Scott. I think it would be a good idea to post your query here:
Bring Back The Equalizer
Powerbook G4 17" Mac OS X (10.4.7)

Bookmarks, history no longer available after upgrade to 3.1.17

Nothing else was done, I just said yes to a message "updates are
available." yes

Hello Lieselot
The upgrade of our SAP-XI was done by an external company. Therefore I cannot tell you the detailed procedure.
However, you should search the Service Marketplace for patches of support package 0014 (there should be at least one patch around).
If I remember correctly patching was required on both ABAP and Java stack.
Regards
Uwe

Adobe PDF Printer No Longer Available After Acrobat X Install

I've been using Acrobat 8 Pro for several years. To generate PDFs, I use the Adobe PDF printer (through FrameMaker). I recently installed Acrobat X Pro. Now there's no Adobe PDF printer. Save as PDF doesn't work (no PDF generated). I need to get the Adobe PDF printer back but cannot find any information about how to install it. All the Acrobat Distiller help has to say is that you should use the Adobe PDF printer. Not helpful at all.

Good day,
I'd like to see if I can help you.
salilley wrote:
OK!
So I spend Time installing the "TRIAL" (1hr) and eat up to 2 gig's of my hard drive.
Then I cant do the one thing that it should do from the get go, create a PDF!
Did the Adobe PDF Printer install with your trial?
What application did you author the file in that you'd like to convert to PDF?
Did you print your file from that application to the Adobe PDF Printer?
And to correct and continue to evaluate the "TRIAL" version I must delete the working version of software so that the "TRIAL" Version will be able to create a PDF!!!!(30 Min)
And if I don't like the "TRIAL" version I have to Reinstall the Original.
(30 Min)
Do you mean that you had a previous version of Acrobat (such as Adobe Acrobat 8 or 9) installed?
If so, this is not surprising as we do not support multiple versions of Acrobat installed on the same computer.
Regards,
David
Acrobat Community Manager
Adobe Systems

Equalizer button no longer available after upgrade to iTunes 7

With iTunes 6, there was always a button at the bottom of the iTunes window to toggle on & off the Equalizer. With iTunes 7, the button is gone. Now, the only way to activate it is to choose "Show Equalizer" from the View menu. There isn't even a shortcut key to toggle it.
Am I missing something, or was this an oversight that slipped in during the UI redesign?
Thanks, Scott
Dell Precision 370 Windows XP Pro

Hi Scott. I think it would be a good idea to post your query here:
Bring Back The Equalizer
Powerbook G4 17" Mac OS X (10.4.7)

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Script no longer works after Upgrade to 10.4.6

The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
Anyone else having Applescript problems with 10.4.6?
--Bob
tell application "Finder"
activate
set fname to selection as string
if fname contains "0." then
move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "1." then
move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "2." then
move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "3." then
move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "4." then
move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "5." then
move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "6." then
move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "7." then
move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "8." then
move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "9." then
move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end tell

I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
Jeff Johnson
Dual 1.2 GHz Mac OS X (10.4.6)
Dual 1.2 GHz

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Ethernet printer no longer available after upgrading Airport

Similar Messages

Maybe you are looking for