Ethernet Printer w/ Windows/Boot camp - help

I have just installed Boot Camp and Windows XP/SP2 on my iMac. All is well, except I can not get the iMac, when running Windows, to print to my ethernet-connected HP LaserJet 1200n. It works great when running OSX. The iMac is connected via an ethernet hub to both the printer and my router. It finds and communicates perfectly with the router. It will not, however, find the printer. I have tried all of the miserable "wizards" that I can find, but no luck. Supposedly Windows has the driver for the printer, but it can not find it. What am I doing wrong? Thank you!

Thanks. Two questions:
1. I was told that the drivers were part of Windows XP Pro, and even if not present the wizard should "find" an unknown printer. Are these two "facts" true or false? (I'm new to Windows)
2. I assumed that this forum, "Windows Compatibility", would be the proper forum for this type of question (compatibility of an ethernet printer with Windows), and that the Boot Camp group would be for quetions specific to Boot Camp rather than to how to get Windows to work with a printer. Again, true or false?
Since I'm new to this I could use some direction. Thank you!

Similar Messages

Will genius bar install windows (boot camp) for me?

will genius bar install windows (boot camp) for me? if so, costs?

Ask them. We don't know what your local Apple Store will do for you. It will certainly cost you their hourly charge for however many hours are involved. You may have to purchase Win8 from them but if not you must have a copy of your own.
Or you can take the time to read the Boot Camp documentation and do it yourself. Start here: Apple - Support - Boot Camp. Open Boot Camp Assistant then click on the large button on the left to print the documentation. Then read it very carefully.

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

How do I restore data to a new mac with windows boot camp partition?

Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on Lion

I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

Could I reinstall OS X partition keeping the windows boot camp partition?

II have a OS x partition that need reinstall. In the same hd I have a Windows Boot camp partition. The question is, could I reinstall OS X partition without affect the Windows partition?
Thanks,
Jorge.

Sometimes it works, sometimes not.
Of course you should backup both.
Q: why do you think OS X needs to be reinstalled or something?
Disk directory trouble?
Because 3rd party disk utility can do better, as well as maybe clone Mac volume so you can boot and do more repairs.
Or maybe the partition table is shot. Or bad sectors. And bad sectors can require a full format.
In a perfect world, but disk drives and systems aren't

Have renewed my ExportPDF Subscription, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)

Have renewed my ExportPDF Subscription, have the confirmation email, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)

Hi azza675,
ExportPDF converts PDF files to Word and Excel formats (and several others). What you describe, sounds like you're trying to convert a file *to* PDF. Did you ever start a trial of Acrobat, perhaps? (Whereas you can create PDFs with Acrobat, ExportPDF doesn't let you convert files to PDF.)
What happens when you log in directly to ExportPDF at https://cloud.acrobat.com/exportpdf?
Best,
Sara

If I get windows boot camp will I be able to play Tomb raider and Sims 3

I an getting a new laptop for school but I also what to play games like that new Lara Croft and the sims 3. I have heard about windows boot camp.
I think I want this retina model
5-inch: 2.3GHz
with Retina display
2.3GHz quad-core Intel Core i7
Turbo Boost up to 3.3GHz
8GB 1600MHz memory
256GB flash storage1
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
Built-in battery (7 hours

Windows Boot Camp does not exist, you mean Boot Camp Assistant, which is a Mac program, it is the program you would use to prepare your Mac to run Windows.
You will need a 64bit retail or OEM version of Windows Home or Professional.
You will also need to read the Boot Camp Documentation thoroughly, and make a complete backup of your machine before repartitioning.

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Windows 8 won't work in Boot Camp, help?

I have a late 2011 MackBook Pro 15" and I have tried multiple ways to get Windows 8 on it via Boot Camp. I don't want to use a Virtual Machine because I need the dual booting ability. When I try to burn the Windows 8 .ISO 32 or 64 Bit onto the DVD Disk Utility says "unable to burn Windows8 consumer preview (not recognized)". The .ISO is from the Microsoft website so I don't understand why Disk Utility won't burn it. I burn the .ISO through Finder and when I put it in my MacBook with Boot Camp up and running, Boot Camp just tells me to insert the Windows disk. So Boot Camp won't read it. Someone please help me, I've been at this for quite a while now and I haven't had any luck.

I decided to give Windows 8 another try this morning and have installed it successfully on my 2009 MacBook Pro. It is fully functional (with audio, keyboard controls) after performing the following steps:
- Burned 64-bit Windows 8 Consumer Preview DVD at 4x
- Opened Boot Camp Assistant and created a support disc (I installed this on an external dos drive)
- Allocated around 35GB to Windows
- Restarted and performed Windows installation
- Important: Installed Windows updates (this makes the OS stable)
- Installed Boot Camp drivers from support disc
For safety, I created some restore points along the way. Before installing the updates, the system hung quite a few times and there was no sound. After the updates and boot camp drivers, everything is now working fine. Good luck with your installation.

Windows/Boot Camp printer sharing with OS X

I have three Macs on a wireless network - 2 MacBooks and a MacMini. The MacMini and one of the Macbooks runs Win XP under Boot Camp. The MacMini has a USP printer attached.
I can print to this printer from both of the WinXP/BC machines and the OS X MacBook can 'see' the MacMini WinXP/BC environment and picks up the printer for setting up in printer preferences. However, the OS X MacBook cannot print to the printer. The printer is marked to be shared in the MacMini and is accessible from the WinXP/BC MacBook. The correct driver has been loaded into the printer panel on the OS X machine.
When the print command is given from the OS X machine, the printer panel shows: "Attempting to connect to host (MacMini) for printer. Connecting..." and then hangs on that.
This is a solid problem. Any ideas would be most welcomed.

There are links on this FAQ site to printer sharing under Windows etc
http://tech.ifelix.net/

Windows Boot Camp Printing

I have a printer installed on my network attached directly to Time capsule. All my Macs in OSX print fine. However, I cannot get my Windows XP Boot Camp to find the printer. Any suggestions. Thanks.

Download and install Bonjour for Windows and that will solve your problem.
Read this thread;
http://discussions.apple.com/thread.jspa?threadID=1440665&tstart=30
Good Luck!

Help, Windows Boot Camp Installer Freezes Befor Finshing Installation

MacBook Pro 2.6 4g Ram 200Gg hd, 17hd 10.5 Leopard
Gave windows 25g
Installed Windows XP Home SP2 no problem,
Windows runs
Installing Boot Camp for Windows - Freezes on The Atheros wireless install - Hard Freeze - (left it for 30 min So far.) Mouse is frozen, keyboard dose not work.

Justin:
How about we try this:
1. Hard Wire the internet connection to your Macbook Pro via the ethernet port
2. This should allow you to connect to the internet
3. Open Internet Explorer
4. Choose Tools from the menu of the Internet Explorer and then click on Windows Update
5. This should open a separate window from which you can choose update and at that point windows update should get the drivers for Atheros and list them as Optional Update. Install those drivers.
I am not sure if you can even get this far but is worth a shot.
Axel F.

Windows 7 RC on Boot Camp help

Hey Guys,
I have a macbook with leopard 10.5.6.
I want to run the windows 7 RC using boot camp. I have read instructions and they all say that after windows has installed i should put my leopard disc in to install the drivers for windows. My problem is that the macbook does not come with that disc!
What should i do??
Regards
sMC

i got it from apple. i have read on sites that only the pro comes with the discs.
That's not true. All Macs ship with an installer disk (or disk set) that has Mac OS X as well as the applications bundled with the particular model of Mac. If you didn't get the installer disk with your system, contact Apple (if you got the system from an Apple Store, retail or online), or the dealer if you purchased the system from an independent Apple reseller.

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

M-Audio ProFire audio interfaice not seen by Windows/Boot Camp

It seems Windows XP SP2 under Boot Camp, running on a Mac Pro dual-quad Nahalem 2.66 has a problem with connecting to Firewire devices. It won't even boot up with Firewire 800 drives connected, and I understand from reading posts in other threads that this is a common problem.
The problem I'm looking to get resolved has to do with my M-Audio ProFire FW 400 interface. Windows will boot up in Boot Camp with the ProFire connected and powered on, and I have installed the latest driver from M-Audio. But when I launch the ProFire control panel, it reports that it cannot find a ProFire connected. I use the ProFire in the Mac OS side in Logic and ProTools, so the unit and connection are fine. I will also be contacting M-Audio to see if they know of this issue.
TIA for any help.
- Paul

hey i don't know if this helps but i have M-audio Firewire Audiophile...it seems that when you boot windows, if m-audio is "ON" it searches for the pc Bios... but maybe it's not possible on a mac...
first time i rebooted bootcamp i noticed that i could see the levels volume on the m-audio control panel but i didn't hear any audio from speakers....
so what i did???
now every time i boot windows, m-audio first is OFF...then after completely booted, i turn it on...autosearching for its drivers,wait for 2 beeps from the speakers...then
AUDIO IS ALWAYS ON AFTER MANY HOURS... :-)TESTED [OK]
but i hope they solve this problem soon...

Ethernet Printer w/ Windows/Boot camp - help

Similar Messages

Maybe you are looking for