Ethernet Pro 100 Problems Recognizing

I have a fairly ancient laptop here and I decided that the only truly just thing would be to install ArchLinux on the thing...
I'm a pretty big amateur when it comes to Linux but even with my limited skills I've come to the conclusion that the system is not recognizing the network card.
Am I missing some sort of driver set up that would allow Arch to recognize the network card?
As the title suggests it is the Ethernet Pro 100 card.
Any help would be greatly appreciated!

revenge1989 wrote:....As the title suggests it is the Ethernet Pro 100 card....
That can be ambiguous.  Could you post the output of lspci and lspci -n   ???
Thanks

Similar Messages

  • Canon Pro-100 Problem end of paper

    Can someone please help, This printer is Brand New only printed about 8-10 photo's . All of the sudden no matter what type of paper I use, luster, glossy, matt, I even tried cleaning the bottom plate and rollers using the Canon maintence program. It prints fine but once it gets to the bottom of any paper this happens , On this photo luckly there is white border but this happens on the prints itself if printing full image or if there is very little border. You can see black marks on the bottom of the print (white border) in this case. Also printer sounds fine except when it gets to the end of the paper starts making a funny sound and this happens. The print just get's ruined , anyone?

    Yeah, my suspicion was, dark ink was getting where it shouldn't. The Canon cleaning system will only do so much. And if too much fouling gets where it's not supposed to be, it can be a nightmare to get out.
    Perhaps the paper is not able to absorb that much ink?
    I should have asked if you were using Canon paper? The best way to get going is to make sure you use Canon brand paper and Canon brand ink. Get it right and than experiment with other papers. Never, never use anything but Canon brand ink.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • Ethernet Intel 82562 pro/100 installation problem on sun 10

    HI,
    I have installed sun 10 on my Pentium 4 machine. but sun os has not detected on board intel 82562 pro / 100 Ethernet card.
    I also searched for drivers on net but could not find any thing.
    any one will help me out.
    Thanks,
    Rajesh

    In your Applications folder, there should be an app caller Server.app
    Double-click that to start the server installation.

  • Problem downloading software for HP Laserjet Pro 100 Color mfp m175nw

    The window xp computer recognizes the hp laserject pro 100, but I can not install the software.  I tried using the CD, the hp smart intall and installing it from the website.  Nothing works.  When it says printer found and it reads this my take a few minutes, it is still on 0% and it has been days.  We need the software so we can scan.  Thanks for the help

    Ok, I have a few questions:
    1. Do you have Administrative rights on the computer? If so, try right clicking on the installation and choose to run it as administrator.
    2. Was the printer, or any other HP printer, previously installed on this computer?
    3. How is the printer connected to the computer (wifi, usb, ethernet)?
    4. Have you tried to install any other software recently?
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • PRINTING IN COOL DOWN MODE PROBLEM IN HP LASERJET PRO 100 COLOR MFP M175a

     i recently bought HP Laserjet pro 100 color MFP M175a but it prints like 40 pages and goes to cool down mode and it takes like 10 minutes to cool and again it prints 40 pages  so i donot the problem

    Hi @teko2014, 
    I see by your post that the printer keeps going into a Cool-Down mode. I can help you with this. I can help you with this.
    I have provided a document with Resolving Control Panel Messages.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Update the printer's firmware. HP LaserJet Pro 100 color MFP M175a Drivers.
    Select your operating system, click next, click the link for firmware.
    Where is the printer located? (enclosed cabinet, desk)
    If the printer is in a enclosed area, temporarily move it to another open location and try printing again.
    What is the paper's weight and what kind of paper are you using?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing Problem with Pro-100 and Photoshop

    This is my setup: using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6. I have new Canon Pixma Pro-100 printer and set it up OK. First thing printed was a page from a document from MS Word on 8.5X11 plain paper - this came out OK. Next I fire up Photoshop and open a 4X6 inch image (just a snapshot in jpeg, landscape format) to do a test print.  I set it up in the print dialog as 4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop manages the color.  I load the paper in the rear tray close the covers and hit print.
    Now, when it starts to print the printer moves about 3.8 inches of paper out of the printer and it starts printing on the remaining 2.2 inches then spits the paper out.  It does this in Photoshop (any image, it doesn't matter), and it does it printing from Nikon’s Capture NX.  I have been able to get it to print on the paper correctly using Apple's Preview program but that that's not going to do me any good. I was on the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting I would have to use Canon's printing apps instead to print - that doesn't do me any good either. I want to be able to print from Photoshop. I have the most recent Canon driver, and Photoshop is up to date. Any one every heard of this or experienced the same problem?  I don’t think I’ve overlooked anything. Thanks JMDavis!

    Hi JMDavis,
    Have you tried printing using the Print Studio Pro plugin for Photoshop?  If this is not install, it is available for download from Canon's web site.  To download and install Print Studio Pro, please follow these steps:
     1.  Visit Canon's website at:    http://www.usa.canon.com/cusa/support/consumer
     2.  Type PIXMA PRO-100 in the "Enter Your Model Name" box and click GO.
     3.  On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
     4.  Click Software.
     5.  Click on Print Studio Pro.
     6.  If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
     7.  Click on the Download button.
     8.  The file will be downloaded to your Downloads folder.  
     9.  Once the download is complete, close all windows.
    10.  Double click [mpsp-mac-1_3_5-ea9_2.dmg] in your Downloads folder.  Files will extract.
    Follow the prompts and installation will complete.
    Once installed, please open your image in Photoshop and print it using the Print Studio Pro plugin.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a problem connecting  a canon Pro-100 injet printer to my iMac oS Mavericks.

    I have purchased a Canon Pro-100 inkjet printer which I am trying to connect to my printer. The software on the disc was not compatible with OS Mavericks so Canon sent me the updated software. Still won't work. I get an air message which I have sent to Canon. They say it is an Apple problem which has occurred a lot recently. Aplle online chat support could not help. Has anyone else had this problem. I've got an expensive printer I can't use.

    I know I have to give up on the printer and scanner- but I am going to try to find something to keep my tablet going for awhile.
    Are you actually reading the responses that people are giving you?
    1. Your printer will work with Gutenprint support, possibly will work with 10.9 drivers.
    2. Epson has a scanner Yosemite driver for your scanner.
    3. And Wacom has a driver for your tablet.
    You have no reason to be that miserable, all things considered.

  • How to configure Intel Pro/100 ethernet in PXI-8176 controller for RedHat Linux kickstart installation?

    I have trouble configuring the Intel Pro/100 ethernet for the PXI-8176 controller during the kickstart installation. Did anyone have better luck?

    Not with Linux but...
    I had trouble setting it up for RT.
    There is an issue with the chipsets used and the firmware of the 8176 when sizing the bus.
    There was a KB article.
    NI support should be able to chase down your details for you.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • PRO-100 margin print problem

    Did a PRO-100 driver update recently (11.7.1.0) on my MacBook Air 10.9.5, and the right-side printing gets cut off when print articles on regular "letter paper". Not sure how this can be corrected? Thanks.

    ebiggs1, thanks for a reply and i will tell you what i know.
    1. am not real computer literate, so i probably don't know some basic things....
    2. This Mac was purchased about 5 wks. ago and all i have done besides the canon printer update is update Firefox (this is the browser i use), Adobe flash p. and reader, downloaded Libre Office and Carbon Copy Cloner.
    3.examples of what I print would be paragraphs in a discussion on a camera review site, or a recipe off a food website, etc., or an email i got.
    4. Since writing about my problem i experimented by clicking View on the top Firefox bar and zooming out 2X (the print size has been TOO large, also) and i also checked the box on the print screen, "Ignore scaling and shrink to fit page width"... doing these 2 things seem to solve my problem, but if you have other insights i always like to learn.
    Thanks again!

  • Pixma Pro 100, new install problems

    I just bought a Pro 100, everything is new. Trying to intall the print head but it would not "center" when I opened the cover to intall the print head and ink. I pulled it to cented, installed the print head and ink. Getting error light, flashing 3 times. Also, I noticed I didn'r get any lights on the ink cartridges. HELP! Please.

    First never pull or push the print head mechanism.  But at any rate did you make sure you removed all the packing material, some is pretty small?
    Load some A4 paper.
    Hold down the RESUME/CANCEL button until the Power lamp flashes four times, then release it immediately. The print head alignment pattern will be printed and the printer will adjust the print head position automatically. Do not perform any other operations until the printer completes the printing of the print head alignment pattern.
    You cannot feed paper from the Front Tray for aligning the Print Head. Load paper in the Rear Tray
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Laserjet pro 100 color mfp m175

    We have a number of HP LaserJet Pro 100 Color MFP M175's in our school.  They are connected to the network via ethernet cable rather than wirelessly. A number of users print to them either from a Windows XP (running service pack 2) desktop or from a Windows 7 (newly built) laptop.  They were working fine for a few days and then all of a sudden they may have any of the following problems:
    unsupported personality error printed at the top of a lot of pages (ie you may try and print one page but hundreds of pages come out with this error).
    there may be an invalid driver error on the control panel on the printer
    there may be weird alien-looking characters at the top of hundreds of blank pages
    initially all of the printers had the driver installed that came with the printers, when we started getting the error, we then tried running the diagnostics doctor on the hp web site, which said all the drivers were valid.  We have also tried using the universal print driver from the HP support website, but still get the problem after a few days.  We can make all of the errors go away by re-installing any of the above drivers, but then the problem starts happening again after a few days. The server is Windows 2003R2 running service pack 2, we have tried installing the drivers on the server too, but they won't install. Another printer was set up this week in the school office which only has people printing from Windows 7 machines and doesn't have the error - this could be because it's too soon to happen yet, or maybe because there are no Windows XP machines printing to it? (It does print through the same server as the others)  Help would be greatly appreciated, we are a school and so can't afford to be wasting lots of paper, plus this is taking up all of our time rather than fixing other issues!  thanks in advance

    Tammy, sounds like there could be a couple things that might cause this issue. The first of which is that the RJ45 cable you are using to connect the printer might have become corrupted. I would replace that cord and see if the issue remains. 
    Second, I want you to see about updating the firmware from this website :
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?cc=us&lc=en&dlc=en&product=5076465
    If that still presents issues, you can use that same website to download the more recent drivers. I would uninstall the old version you have on the computer and then open that link and install the full feature software. 
    Let me know how that goes and I will get right back with you! 
    I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here! 
    -Spencer

  • HP LaserJet Pro 100 Color MFP M175a and airport express

    Hi,
    I just bought an HP LaserJet Pro 100 Color MFP M175a and installed it via USB cable on my mac book pro. Then I connected the cable to my Airport Express (where I had before a Samsung printer working correctly) and now it is impossible to find my printer via the airport express. I tried to add it via the printers & scanners (+) but it does not appear in the list.
    Then I tried to add it via IP address but the 175a model has no IP address, which means I can put the address of the airport express but it does not communicate with the printer then...
    I really tried several options without success and would be really grateful if someone has an idea or a solution.
    Thanks in advance for your help!
    Chris

    Hi,
    Thanks for the link that is really useful. However when we follow this process, the printer is not recognized as a printer but as a scanner, which means that everytime we want to print with it, it is not possible because the scanner is not proposed as a device to print.
    On the following link http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Laserjet-100-color-MFP-M175a-Mbook-Air-lion-o... we are trying to solve this problem with Provost but it seems to be more complicated than expected. So please feel free to tackle this problem with us .

  • HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

    HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
    This question was solved.
    View Solution.

    Hi Watcher35,
    I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
    Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
    This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP LaserJet Pro 100 color MFP M175nw unable to communicate with product

    Hi guys,
    I've had a HP LaserJet Pro 100 color MFP M175nw for 12months now and it has worked great over my wireless network. I recently upgraded from router from a 5 year old single band router to a late model dualband wireless N router.
    Since i did this my HP LaserJet Pro 100 color MFP M175nw was unable to reconnect to my new network.
    I have uninstalled the drivers and have tried reinstalling the drivers but each time (after I select Connect the Product/Coonect through wireless network, have tried both Yes retrieve the wirelss settings on my computer and No I will enter the wirelss settings manually) but no matter which I select the printer is installed successfully but then gets stuck at 15% and says cannont communicate with the product.
    I have disabled my firewall during the installation and have only used the USB cable when the installation has asked me to do so.
    The printer is visible in control panel but each time I do a test print or send something to the printer in the sys tray the print job is shown but nothing ever happens.
    The installation will work fine if I install it via the directly connect to the computer using USB option.
    If I do a test print fromt he printer itself by going into the network setting, network test it prints a page that says:
    Wireless On Pass
    Wirelss Working Pass
    Network Name SSID Found Fail
    Security Fail
    Your HP printer cannot find your wirelss router. The WPA authentification method on your HP has changed fromt he default setting.
    Is there anyway I can edit the SSID network name and password without having to do this install process?
    This is really frustrating. Just spent 3 hours with HP support which got me know where (they were reading the script the supplied me) and then when I rebooted and went to go back to online chat support the website tells me their support is only available during business hours!
    Any help would be great

    OK time to back up totally.   I need to make sure you are following the instructions in the user guide to install this printer.  Please start from scratch by uninstalling all software from your computer and outline every step to make sure it is correct. 
    You have to use the USB cable to set up the wireless connection. 
    Go here for the User Guide and all installation info.  Get your drivers and troubleshooting info here too.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5076465
    The reason we have to start over is that you started the software installation when you changed your router.  You don't have to do this, but now we do. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP LaserJet Pro 100 color MFP M175nw does not connect to wireless network

    I recently upgraded my wireless network router. I had my HP LaserJet Pro 100 color MFP M175nw connected to the old wireless network router. The SSID is password protected (WPA2)
    I need to connect the printer to the new wireless network router. However, neither the control panel nor blue wireless connection button provide any way for me to do this. The manual has not walked through a way to do this. 
    There really needs to be a simple, no-nonsense way to just connect the printer to the wireless network. How do I connect this printer to a new wireless network?

    Hi @shakayumi ,
    I see that you are having issues configuring the printer on the new router. I would like to help.
    Restore the printer's network defaults.
    Touch the Setup button. (wrench)
    Select Network Setup Menu.
    Then select Restore Defaults.
    Print out a configuration report to make sure the IP address is 0.0.0.0 and the SSID is cleared.
    Printing a Configuration Report.
    Here are the directions for setting up the printer through the Wireless Direct to configure the printer over the network as Infrastructure.
    Turn the Wireless Direct on the printer.
    On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
    On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
    This will load the embedded web server for the printer.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Click on the wireless icon and connect back to your network name.
    Print out a configuration report to make sure the IP address is valid. (192... or 10....)
    Now create a new port, this will save you the time, instead of uninstalling and reinstalling the software.
    Go to Start, Devices and Printers, right click the printer, go to Printer Properties, select the Ports tab.
    Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
    Type in the proper IP address for the printer.
    Make sure the printer is online.
    Test the printer.
    If you are still having issues, then try this method:
    If you have a Ethernet cable, connect it from the printer to the router.
    Wait about a minute, print the configuration page to see if you get a IP address.
    Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Then disconnect the Ethernet cable.
    Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    If the printer is back on the network, create a new port. Steps are listed above.
    Make sure the printer is online.
    Try and print now.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for