Ethernet stopped working at last update

Hard-wired ethernet stopped working after the last update.
Wireless works.
I have a trendnet wireless router. When the imac is connected via physical ethernet cable, it can actually ping and http to the trendnet and other machine on the same subnet just fine. However, it can't get beyond that. Looked at routing table and it looks fine.
When i take the same imac, connect via wireless to the same trendnet router, everything works.
Routing table looks identical.
PC's in same line can be hard-wired to the trendnet router and work fine as well.
Checked for more updates and none available.

This is and old problem that as far as I know has not been resolved. You might try a search here to see all the other posts concerning this.
I had a similar problem with my brand-new Mac about a month ago. It worked on my wireless system when I first booted it up and then after I updated it about 20 minutes later, it began to repeatedly drop the Internet connection. After a week of fighting it, I had to switch to Ethernet thus having only my Mac wired while my PCs cruise right along on wireless.
When I first tried the Ethernet hookup, it still dropped a couple of times. It has not done so in the last 2 weeks, knock on wood. However, I am afraid to try wireless again as I may never get Ethernet back. Perhaps, just perhaps, Apple will resolve this in the next update if they even are aware of it.
Sorry for no answer to your problem. I hope someone sooner or later is able to resolve this.

Similar Messages

My Logitech K750 numeric keypad stopped working after last update-numbers only

After the last Mountain Lion update, the number on my numeric keypad will not function. They work for my login, but then become inactive. I have tested the system with an Apple keypad, same thing! What happened? Is there a keyboard setting that needs to be reset?

Dianefromblaine,
Thank you. My K750 number pad stopped working on my iMac. The keyboard and number pad 'do' work on a different Mac, so I suspect it is some setting on the iMac. I did a Safe Mode start, reset the SMC, and repaired the disk permissions. The dongle was plugged into an USB Hub. It is now plugged into the iMac USB port. The keyboard has a 90% charge, but still does not work. Then suddenly it started working again, but stopped after about one month.
I found your "Accessibility>Mouse and Trackpad" suggestion and deselected "Enable Mouse Keys". My number pad works again.
Thanks.

Command line option "-save-to-folder" stopped working after last update: Any workaround?

Running FF on Linux, I was using the -save-to-folder option at CLI to write a copy of the webpage to file with JS content rendered. Worked great until the recent update (to v.27.0.1).
Typical format was: firefox url -save-to-folder filename
When things break, the fixes sometimes happen quickly, sometimes not. In the meantime, anyone have a workaround?

[http://ubuntuforums.org/showthread.php?t=2210953&p=12955762#post12955762]?
It will depend if your Linux build was compiled by a third party. Typically if a function like that stops working, uninstalling might be a good option, but maybe not in this case.
The full list are [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options] is this one custom perhaps?
There is an add on [https://addons.mozilla.org/en-US/firefox/addon/save-file-to/ Save file to] that adds a dialogue, but you may want to stick to linux. There is a customize shortcuts [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/ add on]
-recording-output may be something you can try. Or make a bug! :-)[bugzilla.mozilla.com]

Screen sharing stopped working after last update

Hello all,
I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
Can anyone help?
Thanks a lot,
Luis

Problem solved!
After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
System Preferences>Security and Privacy>Firewall Options
Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
Be sure to reboot your computer and you should be good to go!

Embedded videos and youtube videos stopped working since last update. Any clues

All video functions on my IMac have stopped working since updates on Saturday. Videos embedded in web page and on youtube have stopped working.

Assuming you are using Safari ...
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

ITunes stopped working after last update

I got an update for iTunes yesterday. Now when I try to open it I get an error message "iTunes has stopped working" and the program closes. Any clues?

Hi Pam,
Take a look at the article below, it will help you isolate the issue and then provide some suggestions that should resolve it.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If that doesn't help, just reply with details about what you're seeing.
-Jason

HP Support Assistant stops working after last update

message says
hpsf.exe has stopped working
HP ENVY 17-2070nr Notebook PC windows 7 64 bit
This question was solved.
View Solution.

Hi,
Try the following
First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the notebook.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

TC guest network stopped working after last update

Hi, I got the new 2TB TC. And it was working fine. Since I updates it to 7.7.3. The guest network stopped assigning IPs. I can see it and change the settings but I can't join it anymore. It was working fine before.
I Am setting it from iOS devices not a Mac.
The TC is in bridging mode.
I Also tried restoring it to default settings.
Any ideas how to fix this?
Thank you.

I had it working right out of the box when I bought it, there was no double NAT warning or error message, unlike now I have to ignore the double. NAT error message for the light on the TC to turn back to green again.

Ducking stopped working after last update

I had a project I created last summer where I used the ducking feature throughout. It was working great. The sound clip was at full volume, ducking was selected, and as desired and selected all other clips were reduced to 15% volume.
Today I opened the project and played through. The portions where ducking was selected are now functioning the OPPOSITE as intended. The sound clip itself is ducked and all the other clips are full volume.
When in iMovie and click the gear for the clip, it says next to the "ducking" checkbox, "reduce volume of OTHER tracks to 15%". It's in fact reducing the volume of itself to 15% and having NO effect on the other tracks.
Is there a solution to this?
Please, I already know of several workarounds... what I want to know is what caused this and if there's a real solution.
Thank-you.

sparky67 wrote:
When in iMovie and click the gear for the clip, it says next to the "ducking" checkbox, "reduce volume of OTHER tracks to 15%". It's in fact reducing the volume of itself to 15% and having NO effect on the other tracks.
Hello sparky,
I have encountered the same problem (although I cannot say if it is due to a recent update).
And unfortunately, I do not have any idea what might have caused this or how to resolve it.
What makes this so weird is that I have other iMovie projects on the same machine using the same type of source files (DV video clips and separately recorded voice-overs in WAV format) where ducking works flawlessly - with the same settings.
I would really be grateful for a hint on what's happening here and how one might resolve this problem - it's a total show-stopper, as I cannot complete the project without pre-mixing all audio outside of iMovie, which would take ages.

Middle-mouse paste function stopped working after last update

I think FireFox was updated last night. Ever since then my middle mouse paste function doesn't work any more.
I haven't installed any addons or changed settings either.
I'm talking about: about:config > middlemouse.paste = true
I've tried toggling it etc. but nothing I can do changes it. Any ideas?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Can't send "Pages" document out through e-mail. It stopped working with last update to pages. what to do?

When I try to send a document out through my e-mail, it does not open for me to send e-mail. This was never a problem it seems until last Pages update. What do you recommend?

We are not mind readers.
What version of Pages (don't say latest), and version of OS X?

[Solved] ALSA stopped working after last update.

I'm using pekwm and a 32bit install at the moment. Volwheel will not allow me to adjust the volume. I can't run alsamixer even though it's installed. My username is a member of the audio group... And when I run alsaconf it will not recognize my sound card (HDA Intel).
[neruson@megatron ~]$ alsamixer
cannot open mixer: No such file or directory
[neruson@megatron ~]$ ls /usr/bin | grep alsa
alsa_in
alsaloop
alsamixer
alsa_out
alsaucm
When I ran alsaconf I got this message:
No supported PnP or PCI card found.
Any help would be appreciated
Last edited by Mr_ED-horsey (2011-09-01 00:53:12)

Fixed. I reinstalled "linux" and "linux-headers" and rebooted. Everything's working now

Gnome shell stopped working since last update

Today, after a -Suy and a reboot, gnome-shell is refusing to work. I get thrown into a window manager with nothing open but with my keyboard shortcuts working.
Running 'gnome-shell --replace' in a terminal outputs:
(gnome-shell:4819): GLib-GIO-ERROR **: Settings schema 'org.gnome.shell' does not contain a key named 'enabled-extensions'
Trace/breakpoint trap
I can see the key using 'dconf-editor' but not when using 'gsettings':
$ gsettings list-keys org.gnome.shell
command-history
development-tools
disabled-extensions
disabled-open-search-providers
enable-app-monitoring
favorite-apps
looking-glass-history
I suspect the database is corrupt or something. Is there a way to delete it and restore to defaults?
The pacman.log for today's updates:
[2012-06-03 11:57] Running 'pacman-color -Suy'
[2012-06-03 11:57] synchronizing package lists
[2012-06-03 11:57] starting full system upgrade
[2012-06-03 11:59] upgraded db (5.3.15-1 -> 5.3.21-1)
[2012-06-03 11:59] upgraded perl (5.14.2-7 -> 5.16.0-2)
[2012-06-03 11:59] upgraded automake (1.12-1 -> 1.12.1-1)
[2012-06-03 11:59] upgraded clutter (1.10.4-1 -> 1.10.6-1)
[2012-06-03 11:59] upgraded clutter-gst (1.5.4-1 -> 1.5.6-1)
[2012-06-03 11:59] upgraded colord (0.1.19-2 -> 0.1.21-1)
[2012-06-03 11:59] upgraded eog-plugins (3.4.0-2 -> 3.4.1-1)
[2012-06-03 11:59] upgraded gnome-user-docs (3.4.1-1 -> 3.4.2-1)
[2012-06-03 11:59] upgraded gnumeric (1.10.17-1 -> 1.10.17-2)
[2012-06-03 11:59] upgraded imagemagick (6.7.6.8-1 -> 6.7.7.5-1)
[2012-06-03 11:59] upgraded jre7-openjdk-headless (7.b147_2.1-3 -> 7.u4_2.2-1)
[2012-06-03 11:59] upgraded jre7-openjdk (7.b147_2.1-3 -> 7.u4_2.2-1)
[2012-06-03 11:59] upgraded jdk7-openjdk (7.b147_2.1-3 -> 7.u4_2.2-1)
[2012-06-03 11:59] upgraded libx11 (1.4.99.902-1 -> 1.5.0-1)
[2012-06-03 11:59] upgraded lib32-libx11 (1.4.99.902-1 -> 1.5.0-1)
[2012-06-03 11:59] upgraded lib32-libxft (2.3.0-1 -> 2.3.1-1)
[2012-06-03 11:59] upgraded xcb-util (0.3.8-1 -> 0.3.9-1)
[2012-06-03 11:59] upgraded lib32-xcb-util (0.3.8-1 -> 0.3.9-1)
[2012-06-03 11:59] upgraded libldap (2.4.31-1 -> 2.4.31-2)
[2012-06-03 11:59] upgraded libproxy (0.4.7-1 -> 0.4.7-2)
[2012-06-03 11:59] upgraded libpurple (2.10.4-1 -> 2.10.4-2)
[2012-06-03 11:59] upgraded libxaw (1.0.10-1 -> 1.0.11-1)
[2012-06-03 11:59] upgraded libxft (2.3.0-2 -> 2.3.1-1)
[2012-06-03 11:59] upgraded media-player-info (16-1 -> 17-1)
[2012-06-03 11:59] upgraded net-snmp (5.7.1-2 -> 5.7.1-3)
[2012-06-03 11:59] upgraded perl-io-tty (1.10-1 -> 1.10-2)
[2012-06-03 11:59] upgraded perl-list-moreutils (0.33-2 -> 0.33-3)
[2012-06-03 11:59] upgraded perl-locale-gettext (1.05-8 -> 1.05-9)
[2012-06-03 11:59] upgraded perl-net-ssleay (1.48-1 -> 1.48-2)
[2012-06-03 11:59] upgraded perl-xml-parser (2.41-2 -> 2.41-3)
[2012-06-03 11:59] upgraded perl-yaml-syck (1.20-1 -> 1.20-2)
[2012-06-03 11:59] upgraded pmount (0.9.23-3 -> 0.9.23-4)
[2012-06-03 11:59] upgraded python2-bsddb (5.3.0-1 -> 5.3.0-2)
[2012-06-03 11:59] upgraded startup-notification (0.12-2 -> 0.12-3)
[2012-06-03 11:59] upgraded subversion (1.7.5-1 -> 1.7.5-2)
[2012-06-03 11:59] upgraded vim-runtime (7.3.515-1 -> 7.3.515-2)
[2012-06-03 11:59] upgraded vim (7.3.515-1 -> 7.3.515-2)
[2012-06-03 11:59] upgraded vte-common (0.32.1-1 -> 0.32.2-1)
[2012-06-03 11:59] upgraded vte3 (0.32.1-1 -> 0.32.2-1)
[2012-06-03 11:59] upgraded xcb-util-keysyms (0.3.8-1 -> 0.3.9-1)

I resolve this , see my response to similiar questions for resolution at
https://discussions.apple.com/message/23666580#23666580

Flash Stopped working with last update

After my last -Syu flash isn't working in firefox and any site that requires it takes about 10 seconds longer to load. I'm running in arch64 and havn't had a problem before with ndspluginwrapper (or whatever it is called). How do I even start to fix this, I've already reinstalled all related packages.

cu3edweb wrote:If you open firefox from a console and go to a site with flash do you get a error message in the console?
Yes I do:
which: no soundwrapper in (/opt/kde/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin:/opt/java/jre/bin:/opt/qt/bin:/opt/kde/bin)
ERROR: ld.so: object '/opt/kde/$LIB/libartsdsp.so.0' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/opt/kde/$LIB/libartsc.so.0' from LD_PRELOAD cannot be preloaded: ignored.
*** NSPlugin Viewer *** ERROR: /usr/lib/mozilla/plugins/libflashplayer.so: cannot open shared object file: No such file or directory
which: no soundwrapper in (/opt/kde/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin:/opt/java/jre/bin:/opt/qt/bin:/opt/kde/bin)
ERROR: ld.so: object '/opt/kde/$LIB/libartsdsp.so.0' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/opt/kde/$LIB/libartsc.so.0' from LD_PRELOAD cannot be preloaded: ignored.
*** NSPlugin Viewer *** ERROR: /usr/lib/mozilla/plugins/libflashplayer.so: cannot open shared object file: No such file or directory
*** NSPlugin Wrapper *** ERROR: failed to initialize plugin-side RPC client connection
*** NSPlugin Wrapper *** ERROR: NP_Initialize() invoke: Connection was NULL
Hmmm, I'll go ahead and try to figure it out. Thanks for helping.

Camera connection kit stopped working after last update

After the recent update to ios 8.1.3 my Apple Camera connection kit has ceased to work, any one got any ideas why and a possible solution?

Is this a genuine Apple-made CCK or a third party one?
Some third party CCKs are not compatible with iOS 8.

Ethernet stopped working at last update

Similar Messages

Maybe you are looking for