Ethernet two sun ultra's (5&10)

I have (2) Sun Ultra's 5 &10. I want to create a peer to peer connection btween them via ethernet and need some help.

Use a crossover cable. Assuming you have no other connections, they should talk to each other.

Similar Messages

Urgent question about two monitors for Sun Ultra 40 M2

Hello,
I feel extremely unhappy to ask you the following.
I bought recently a Sun Utra 40 M2. I thought that with NVIDA Quadro FX1500 one could have two monitors as there are two DVI-D 's to connect with two monitors.
But today I heard from SUN support that Sun does not support two monitors under SUN Solaris 10. It is possible with Linux on this SUN Ultra 40, but not with Solaris, so it was told to me.
But: is this true? I still can not believe it.
with friendly greetings,

Hello,
I see, with Windows it is possible just lik that and with Solaris one needs two cards.
Well, it seems for a one man"s business customer like me: end of story.
I still can not believe it that Sun would arrange this.
I will wait and see.
with friendly greetings,
P_ter

Two internal hard-disk on sun Ultra 5 ??

Hi,
Can sun ultra 5 handle two internal hard-disk?
If it is possible, how can this be done?
Thanks on the sharing...
Best regards ,
jhayi

it should go where the floppy is/would be... you just need a different ide cable...
and remember the cable select or master/slave jumper settings... and the 137 gig hd size limitation!
here is the web page
http://sunsolve.sun.com/handbook_pub/Systems/U5/components.html#exploded_view
haroldkarl

Solaris 8 SPARC SUN ULTRA 10 - WP event on CPU0

Hii everyone
My Server SUN 5.8 has rebooted itself after having been generated internally out of the ordinary events related to CPU.
The log en the file.messages and output of prtdiag is:
{color:#ff0000}Apr 15 21:20:10 server1 SUNW,UltraSPARC-IIi: [ID 727863 kern.warning] WARNING: [AFT1] WP event on CPU0, errID 0x000091eb.e4c47547{color}
{color:#ff0000}Apr 15 21:20:10 server1 AFSR 0x00000000.00800040<WP> AFAR 0x000001ff.dbfffdd8{color}
{color:#ff0000}Apr 15 21:20:10 server1 AFSR.PSYND 0x0040(Score 95) AFSR.ETS 0x00 Fault_PC 0x4e3a98{color}
{color:#ff0000}Apr 15 21:20:10 server1 UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000 UDBL.ESYND 0x00{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 836849 kern.notice] {color}
{color:#ff0000}Apr 15 21:20:10 server1 ^Mpanic[cpu0]/thread=30001d205a0: {color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 401469 kern.notice] [AFT1] errID 0x000091eb.e4c47547 WP Error(s){color}
{color:#ff0000}Apr 15 21:20:10 server1 See previous message(s) for details{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 100000 kern.notice] {color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 723222 kern.notice] 000002a10091d6c0 SUNW,UltraSPARC-IIi:cpu_aflt_log+4e0 (2a10091d77e, 1, 10143958, 2a10091d908, 2a10091d7cb, 10143980){color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 179002 kern.notice] %l0-3: 0000000000000001 000002a10091d9e0 0000000000000003 0000000000000010{color}
{color:#ff0000}Apr 15 21:20:10 server1 %l4-7: 0000000000000001 00000000845d5bc0 0000000084407f7c 0000000000000000{color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 723222 kern.notice] 000002a10091d910 SUNW,UltraSPARC-IIi:cpu_async_error+7dc (1, 1ffdbfffdd8, 800040, 0, 0, 0){color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0640000000800040 0000000000000000 0000000000800040{color}
{color:#ff0000}Apr 15 21:20:10 server1 %l4-7: 000002a10091d9e0 000002a10091dba0 0000000000000000 0000000000000000{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 100000 kern.notice]{color}
Apr 15 21:20:10 server1 genunix: [ID 672855 kern.notice] syncing file systems...
Apr 15 21:20:10 server1 genunix: [ID 733762 kern.notice] 6
Apr 15 21:20:11 server1 genunix: [ID 733762 kern.notice] 3
Apr 15 21:20:12 server1 genunix: [ID 904073 kern.notice] done
Apr 15 21:20:13 server1 genunix: [ID 353387 kern.notice] dumping to /dev/dsk/c0t0d0s1, offset 107479040
Apr 15 21:20:24 server1 genunix: [ID 409368 kern.notice] ^M100% done: 13157 pages dumped, compression ratio 3.21,
Apr 15 21:20:24 server1 genunix: [ID 851671 kern.notice] dump succeeded
Apr 15 21:21:08 server1 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_108528-09 64-bit
Apr 15 21:21:08 server1 genunix: [ID 913631 kern.notice] Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Apr 15 21:21:08 server1 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:c:c6:5e
Apr 15 21:21:08 server1 unix: [ID 389951 kern.info] mem = 1048576K (0x40000000)
Apr 15 21:21:08 server1 unix: [ID 930857 kern.info] avail mem = 1027547136
Apr 15 21:21:08 server1 rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
Apr 15 21:21:08 server1 rootnex: [ID 349649 kern.info] pcipsy0 at root: UPA 0x1f 0x0
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] pcipsy0 is /pci@1f,0
Apr 15 21:21:08 server1 pcipsy: [ID 370704 kern.info] PCI-device: pci@1,1, simba0
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] simba0 is /pci@1f,0/pci@1,1
Apr 15 21:21:08 server1 pcipsy: [ID 370704 kern.info] PCI-device: pci@1, simba1
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] simba1 is /pci@1f,0/pci@1
Apr 15 21:21:18 server1 simba: [ID 370704 kern.info] PCI-device: ide@3, uata0
Apr 15 21:21:18 server1 genunix: [ID 936769 kern.info] uata0 is /pci@1f,0/pci@1,1/ide@3
Apr 15 21:21:18 server1 uata: [ID 114370 kern.info] dad0 at pci1095,6460
Apr 15 21:21:18 server1 uata: [ID 347839 kern.info] target 0 lun 0
Apr 15 21:21:18 server1 genunix: [ID 936769 kern.info] dad0 is /pci@1f,0/pci@1,1/ide@3/dad@0,0
Apr 15 21:21:19 server1 dada: [ID 365881 kern.info] <ST320414A cyl 39533 alt 2 hd 16 sec 63>
Apr 15 21:21:19 server1 uata: [ID 114370 kern.info] dad1 at pci1095,6460
Apr 15 21:21:19 server1 uata: [ID 347839 kern.info] target 1 lun 0
Apr 15 21:21:19 server1 genunix: [ID 936769 kern.info] dad1 is /pci@1f,0/pci@1,1/ide@3/dad@1,0
Apr 15 21:21:20 server1 dada: [ID 365881 kern.info] <Maxtor 6E040L0 cyl 19156 alt 2 hd 16 sec 255>
Apr 15 21:21:20 server1 swapgeneric: [ID 308332 kern.info] root on /pci@1f,0/pci@1,1/ide@3/disk@0,0:a fstype ufs
Apr 15 21:21:20 server1 simba: [ID 370704 kern.info] PCI-device: ebus@1, ebus0
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] power0 at ebus0: offset 14,724000
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] power0 is /pci@1f,0/pci@1,1/ebus@1/power@14,724000
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] su0 at ebus0: offset 14,3083f8
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] su1 at ebus0: offset 14,3062f8
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
Apr 15 21:21:21 server1 rootnex: [ID 349649 kern.info] ffb0 at root: UPA 0x1e 0x0
Apr 15 21:21:21 server1 genunix: [ID 936769 kern.info] ffb0 is /SUNW,ffb@1e,0
Apr 15 21:21:21 server1 unix: [ID 987524 kern.info] cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x91 clock 440 MHz)
Apr 15 21:21:21 server1 ebus: [ID 521012 kern.info] se0 at ebus0: offset 14,400000
Apr 15 21:21:21 server1 genunix: [ID 936769 kern.info] se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000
Apr 15 21:21:22 server1 hme: [ID 517527 kern.info] SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
Apr 15 21:21:22 server1 simba: [ID 370704 kern.info] PCI-device: network@1,1, hme0
Apr 15 21:21:22 server1 genunix: [ID 936769 kern.info] hme0 is /pci@1f,0/pci@1,1/network@1,1
Apr 15 21:21:25 server1 genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t0d0s1 size 512 MB
Apr 15 21:21:26 server1 hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiver Selected.
Apr 15 21:21:26 server1 hme: [ID 517527 kern.info] SUNW,hme0 : Auto-Negotiated 100 Mbps Half-Duplex Link Up
Apr 15 21:22:36 server1 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Apr 15 21:22:36 server1 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Apr 15 21:23:36 server1 named[184]: [ID 295310 daemon.notice] starting. in.named BIND 8.2.2-P5 Wed Jan 15 04:35:48 PST 2003
Apr 15 21:23:36 server1 Generic Patch-5.8-January 2003
Apr 15 21:23:37 server1 named[221]: [ID 295310 daemon.notice] Ready to answer queries.
Apr 15 21:23:37 server1 named[221]: [ID 295310 daemon.warning] check_hints: A records for L.ROOT-SERVERS.NET class 1 do not match hint records
Apr 15 21:23:38 server1 savecore: [ID 570001 auth.error] reboot after panic: [AFT1] errID 0x000091eb.e4c47547 WP Error(s)
Apr 15 21:23:38 server1 See previous message(s) for details
Apr 15 21:23:57 server1 pseudo: [ID 129642 kern.info] pseudo-device: tod0
Apr 15 21:23:57 server1 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Apr 15 21:23:57 server1 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 15 21:23:57 server1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Apr 15 21:23:59 server1 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Apr 15 21:23:59 server1 scsi: [ID 365881 kern.info] /pci@1f,0/pci@1/scsi@1 (glm0):
Apr 15 21:23:59 server1 Rev. 6 Symbios 53c875 found.
Apr 15 21:23:59 server1 scsi: [ID 365881 kern.info] /pci@1f,0/pci@1/scsi@1 (glm0):
Apr 15 21:23:59 server1 glm0 supports power management.
Apr 15 21:23:59 server1 simba: [ID 370704 kern.info] PCI-device: scsi@1, glm0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] glm0 is /pci@1f,0/pci@1/scsi@1
Apr 15 21:23:59 server1 scsi: [ID 193665 kern.info] sd0 at uata0: target 2 lun 0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] sd0 is /pci@1f,0/pci@1,1/ide@3/sd@2,0
Apr 15 21:24:02 server1 pseudo: [ID 129642 kern.info] pseudo-device: fcode0
Apr 15 21:24:02 server1 genunix: [ID 936769 kern.info] fcode0 is /pseudo/fcode@0
Apr 15 21:24:06 server1 ebus: [ID 521012 kern.info] fd0 at ebus0: offset 14,3023f0
Apr 15 21:24:06 server1 genunix: [ID 936769 kern.info] fd0 is /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3023f0
Apr 15 21:24:26 server1 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 15 21:24:26 server1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
================================= *{color:#0000ff}DATOS DE DIAGNOSTICO{color}* ============================================
server1 ROOT [9] psrinfo -v
Status of processor 0 as of: 04/16/08 09:45:18
Processor has been on-line since 04/15/08 21:21:20.
The sparcv9 processor operates at 440 MHz,
and has a sparcv9 floating point processor.
server1 ROOT [10]
server1 ROOT [9] uname -a
SunOS server1 5.8 Generic_108528-09 sun4u sparc SUNW,Ultra-5_10
server1 ROOT [19] /usr/platform/sun4u/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 scsi-glm Symbios,53C875
Bus Freq
Brd Type MHz Slot Name Model
0 UPA 110 30 FFB, Double Buffered SUNW,501-4788
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
Cheerio: ebus Rev 1
FFB Hardware Configuration:
Board rev: 2
FBC version: 0x3241906d
DAC: Brooktree 9070, version 1
3DRAM: Mitsubishi 130b, version 2
System PROM revisions:
OBP 3.29.0 2000/12/20 18:45 POST 3.1.0 2000/06/27 13:56
=== *{color:#0000ff}SECOND TEST{color}*
server1 ROOT [4] /usr/platform/`uname -i`/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 scsi-glm Symbios,53C875
Bus Freq
Brd Type MHz Slot Name Model
0 UPA 110 30 FFB, Double Buffered SUNW,501-4788
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
Cheerio: ebus Rev 1
FFB Hardware Configuration:
Board rev: 2
FBC version: 0x3241906d
DAC: Brooktree 9070, version 1
3DRAM: Mitsubishi 130b, version 2
System PROM revisions:
OBP 3.29.0 2000/12/20 18:45 POST 3.1.0 2000/06/27 13:56
============================================
I don't know exactly what is the origin of the problem, How to solver or how to prevent to avoid further problems. This is the first time I have had this Kind of problem on my Server SUN.
I appreciate greatly, any tip o help.
Jimmy

Yup.
EOL in November 2002
Which means EOSL November 2007
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/U10/U10
Unless you've somehow maintained a service contract on that system,
by specific system serial number,
your best bet is to haunt an online auction site (such as Ebay),
and get a replacement cpu or cpus for shelf stock.
Your current OBP patch level is only down two patch levels,
but your kernel patch level is essentially "never patched".
If it were patched better it may have noticed the issue a lot sooner.
Expect to replace that cpu.

Sun ultra 40 boot problem AMD Opteron

Hi,
my Sun Ultra 40 will not boot, it is an AMD Opteron based machine, the cooling fans are spinning, but there is no msg to read on the monitor.
Occasionally I got it to boot, it ran for two weeks, but at next reboot it displays no signal to the video card.
I spotted this in the manual
===
During POST, the BIOS outputs the error code to I/O port 80h. The workstation
motherboard is equipped with a two segment LED display that displays the current
value of port 80h.
===
but I cannot get the glue in it, maybe because I have opteron AMD and this is targeted to sparc.
Last error msg I read was like this:
===
Phoenix trusted core(TM) server
copyright 1985 - 2004 Phoenix Technologies Ltd.
all rights reserverd
Build Time: 12/19/05 09:46:08
sun ultra 40 workstation BIOS version 1.050
CPU Stepping = E4 2000MHz
MemClk = 200 MHz Tcl=3.0 Trcd = 3 Tras = 8 Trp=3
1023 M System RAM Passed
1024 K cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
ATAPI CD-ROM: MATSHITA DVD-RAM UJ - 845S
Mouse initialized
Kernel Library version:03.00.00.04
Strong ROM Version:03.00
Build:_P
Event log messages, enter setup to view
ERROR
0280: Previous boot incomplete -
Default configuration used
Press <F1> to resume, <F2> to setup
===
what can I do? is the motherboard faulty? How can I get it to boot from CD
and run a system diagnosis?
What mainboard is compatible? should I replace it with a newer mainboard + CPU + RAM?
Will it fit in the Sun Ultra 40 desktop tower?

Hi,
my Sun Ultra 40 will not boot, it is an AMD Opteron based machine, the cooling fans are spinning, but there is no msg to read on the monitor.
Occasionally I got it to boot, it ran for two weeks, but at next reboot it displays no signal to the video card.
I spotted this in the manual
===
During POST, the BIOS outputs the error code to I/O port 80h. The workstation
motherboard is equipped with a two segment LED display that displays the current
value of port 80h.
===
but I cannot get the glue in it, maybe because I have opteron AMD and this is targeted to sparc.
Last error msg I read was like this:
===
Phoenix trusted core(TM) server
copyright 1985 - 2004 Phoenix Technologies Ltd.
all rights reserverd
Build Time: 12/19/05 09:46:08
sun ultra 40 workstation BIOS version 1.050
CPU Stepping = E4 2000MHz
MemClk = 200 MHz Tcl=3.0 Trcd = 3 Tras = 8 Trp=3
1023 M System RAM Passed
1024 K cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
ATAPI CD-ROM: MATSHITA DVD-RAM UJ - 845S
Mouse initialized
Kernel Library version:03.00.00.04
Strong ROM Version:03.00
Build:_P
Event log messages, enter setup to view
ERROR
0280: Previous boot incomplete -
Default configuration used
Press <F1> to resume, <F2> to setup
===
what can I do? is the motherboard faulty? How can I get it to boot from CD
and run a system diagnosis?
What mainboard is compatible? should I replace it with a newer mainboard + CPU + RAM?
Will it fit in the Sun Ultra 40 desktop tower?

SUN Ultra-2 with Solaris 9 constantly self reboots

The Ultra-2 self reboots several times per day.
It is a kernel problem but I was unable to find a solution, so I hope that someone from this forum will help me.
The uname information is:
SunOS ermis 5.9 Generic_118558-14 sun4u sparc SUNW,Ultra-2
The log information is:
Oct 18 12:41:47 ermis SUNW,UltraSPARC: [ID 110026 kern.warning] WARNING: [AFT1] EDP event on CPU1 Data access at TL=0, errID 0x00000691.0326e08e
Oct 18 12:41:47 ermis AFSR 0x00000000.00400100<EDP> AFAR 0xffffffff.ffffffff
Oct 18 12:41:47 ermis AFSR.PSYND 0x0100(Score 95) AFSR.ETS 0x00 Fault_PC 0xfd6dbf38
Oct 18 12:41:47 ermis UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000 UDBL.ESYND 0x00
Oct 18 12:41:47 ermis SUNW,UltraSPARC: [ID 581146 kern.info] [AFT2] errID 0x00000691.0326e08e No error found in ecache (No fault PA available)
Oct 18 12:41:47 ermis SUNW,UltraSPARC: [ID 542596 kern.info] [AFT3] errID 0x00000691.0326e08e Above Error is in User Mode
Oct 18 12:41:47 ermis and is fatal: will reboot
Oct 18 12:41:47 ermis unix: [ID 855177 kern.warning] WARNING: [AFT1] initiating reboot due to above error in pid 580 (httpd)
Oct 18 12:41:52 ermis pseudo: [ID 129642 kern.info] pseudo-device: tod0
Oct 18 12:41:52 ermis genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Oct 18 12:42:04 ermis syslogd: going down on signal 15
Oct 18 12:42:26 ermis genunix: [ID 672855 kern.notice] syncing file systems...
Oct 18 12:42:26 ermis genunix: [ID 904073 kern.notice] done
Oct 18 12:43:09 ermis genunix: [ID 540533 kern.notice] ^MSunOS Release 5.9 Version Generic_118558-14 32-bit
Oct 18 12:43:09 ermis genunix: [ID 943905 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Oct 18 12:43:09 ermis Use is subject to license terms.
Oct 18 12:43:09 ermis unix: [ID 349649 kern.info]
Oct 18 12:43:09 ermis NOTICE: 64-bit OS installed, but the 32-bit OS is the default
Oct 18 12:43:09 ermis for the processor(s) on this system.
Oct 18 12:43:09 ermis See boot(1M) for more information.
Oct 18 12:43:09 ermis Booting the 32-bit OS ...
Oct 18 12:43:09 ermis genunix: [ID 678236 kern.info] Ethernet address = 8:0:20:8f:82:a0
Oct 18 12:43:09 ermis unix: [ID 389951 kern.info] mem = 393216K (0x18000000)
Oct 18 12:43:09 ermis unix: [ID 930857 kern.info] avail mem = 381861888
Oct 18 12:43:09 ermis rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 2 UPA/SBus (2 X UltraSPARC 200MHz)
Oct 18 12:43:09 ermis rootnex: [ID 349649 kern.info] sbus0 at root: UPA 0x1f 0x0 ...
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sbus0 is /sbus@1f,0
Oct 18 12:43:09 ermis scsi: [ID 365881 kern.info] /sbus@1f,0/SUNW,fas@e,8800000 (fas0):
Oct 18 12:43:09 ermis rev 2.2 FEPS chip
Oct 18 12:43:09 ermis sbus: [ID 349649 kern.info] fas0 at sbus0: SBus0 slot 0xe offset 0x8800000 and slot 0xe offset 0x8810000 Onboard device sparc9 ipl 4
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] fas0 is /sbus@1f,0/SUNW,fas@e,8800000
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd0 at fas0: target 0 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd0 is /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd1 at fas0: target 1 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd1 is /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd3 at fas0: target 3 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd3 is /sbus@1f,0/SUNW,fas@e,8800000/sd@3,0
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd6 at fas0: target 6 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd6 is /sbus@1f,0/SUNW,fas@e,8800000/sd@6,0
Oct 18 12:43:13 ermis swapgeneric: [ID 308332 kern.info] root on /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0:a fstype ufs
Oct 18 12:43:14 ermis sbus: [ID 349649 kern.info] zs0 at sbus0: SBus0 slot 0xf offset 0x1100000 Onboard device sparc9 ipl 12
Oct 18 12:43:14 ermis genunix: [ID 936769 kern.info] zs0 is /sbus@1f,0/zs@f,1100000
Oct 18 12:43:14 ermis sbus: [ID 349649 kern.info] zs1 at sbus0: SBus0 slot 0xf offset 0x1000000 Onboard device sparc9 ipl 12
Oct 18 12:43:14 ermis genunix: [ID 936769 kern.info] zs1 is /sbus@1f,0/zs@f,1000000
Oct 18 12:43:17 ermis sbus: [ID 349649 kern.info] cgsix0 at sbus0: SBus0 slot 0x1 offset 0x0 SBus level 5 sparc9 ipl 9
Oct 18 12:43:17 ermis genunix: [ID 936769 kern.info] cgsix0 is /sbus@1f,0/cgsix@1,0
Oct 18 12:43:17 ermis cgsix: [ID 260993 kern.info] cgsix0: screen 1152x900, single buffered, 1M mappable, rev 11
Oct 18 12:43:17 ermis unix: [ID 270833 kern.info] cpu0: UltraSPARC (portid 0 impl 0x10 ver 0x40 clock 200 MHz)
Oct 18 12:43:17 ermis unix: [ID 270833 kern.info] cpu1: UltraSPARC (portid 1 impl 0x10 ver 0x40 clock 200 MHz)
Oct 18 12:43:17 ermis unix: [ID 721127 kern.info] cpu 1 initialization complete - online
Oct 18 12:43:22 ermis hme: [ID 517527 kern.info] SUNW,hme0 : Sbus (Rev Id = 22) Found
Oct 18 12:43:22 ermis sbus: [ID 349649 kern.info] hme0 at sbus0: SBus0 slot 0xe offset 0x8c00000 and slot 0xe offset 0x8c02000 and slot 0xe offset 0x8c04000 and slot 0xe offset 0x8c06000 and slot 0xe offset 0x8c07000 Onboard device sparc9 ipl 6
Oct 18 12:43:22 ermis genunix: [ID 936769 kern.info] hme0 is /sbus@1f,0/SUNW,hme@e,8c00000
Oct 18 12:43:24 ermis genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t1d0s1 size 513 MB
Oct 18 12:43:26 ermis hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiver Selected.
Oct 18 12:43:26 ermis hme: [ID 517527 kern.info] SUNW,hme0 : 100 Mbps Full-Duplex Link Up
Oct 18 12:43:30 ermis pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Oct 18 12:43:30 ermis genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Oct 18 12:43:30 ermis pseudo: [ID 129642 kern.info] pseudo-device: laner0
Oct 18 12:43:30 ermis genunix: [ID 936769 kern.info] laner0 is /pseudo/laner@0
Oct 18 12:43:43 ermis inetd[189]: [ID 965992 daemon.error] pop/tcp: unknown service
Oct 18 12:43:46 ermis pseudo: [ID 129642 kern.info] pseudo-device: tod0
Oct 18 12:43:46 ermis genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Oct 18 12:43:47 ermis pseudo: [ID 129642 kern.info] pseudo-device: pm0
Oct 18 12:43:47 ermis genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Oct 18 12:43:55 ermis pseudo: [ID 129642 kern.info] pseudo-device: vol0
Oct 18 12:43:55 ermis genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Oct 18 12:44:04 ermis pseudo: [ID 129642 kern.info] pseudo-device: pm0
Oct 18 12:44:04 ermis genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0

Hello,
I don't think it is a kernel problem but a h/ware problem.
CPU 1 reported an ecache (sram) data parity event,
the fault handling code in 5.9 can't do anything about the
error as it is in a page belonging to a user process so it reboots the box.
The no error found in ecache means that either the
fault handling code displaced the error from the cache or there
wasn't one and you had a transient transport error between the
cache and the cpu.
I would engage your h/ware support vendor to work out what h/ware component is broken as these things are quite complex, but the score of 95 would (to a h/ware novice like me) point to cpu 1 being the culprit - but check with an expert.
tim

Sun Ultra 10 with SunStorEDGE A1000/D1000 unable to setup

I realise this covers old ground but I have not been able to trace a uitable resolvement and would be grateful for assistance.
I have a Sun Ultra 10 with 256MB RAM and 440GHz cpu.. It has a pci Adaptec 2944UW HVD SCSI interface card. The storage system is a tray of eight scsi 72GB disks housed in a D1000 case. NetBSD reported it as an A1000 SunStorEDGE at sd0 having 16 targets and 8 luns. However NetBSD did not have a readily available controller to setup the raid system so I installed an alternative. I presume the case is a reused old case housing an A1000 unit.
I tried to format the drives directly but they are not lists as devices such as ct1sd1 etc. and so this is not possible.
I have installed Sun Solaris 10 but could not communicate and reported inability to use rdriver and rdnexus and after reading a number of reports that driver hooks had been removed from the kernel in Solaris 10 I have installed Solaris 9.
On both occasions I installed a number of RAID Manager 6.1.1 control packs, namely SUNWosafw, osar, osau, osamn and vtsse direct from my CD here.
I commanded dr_hotadd.sh to take up the challenge but it failed to communicate.
I added a number of Rdac amendments to rparams in /etc/osa but this did not resolve the issue.
I have tried to call probe-scsi-all after doing a reset-all from the OBP but this fails to report anything. I presume this is because the unit is connected by the interface card rather than a direct scsi disk.
dmesg pipe grep scsi reports:
unknown scsi sd0 at uata0 target 2 lun 0
I would be very grateful fr guidance to resolve this connection so that I can create a suitable filestore.
Thanks
c

blackfoot wrote:
I realise this covers old ground but I have not been able to trace a uitable resolvement and would be grateful for assistance.
I have a Sun Ultra 10 with 256MB RAM and 440GHz cpu.. It has a pci Adaptec 2944UW HVD SCSI interface card. The storage system is a tray of eight scsi 72GB disks housed in a D1000 case. NetBSD reported it as an A1000 SunStorEDGE at sd0 having 16 targets and 8 luns. However NetBSD did not have a readily available controller to setup the raid system so I installed an alternative. I presume the case is a reused old case housing an A1000 unit.If it's really an A1000, you won't have access to the drives. You'll only see exposed LUNS from the raid controller. Do you have a dial in the rear with a scsi address? That will be the address that the A1000 will respond on. In addition, the A1000 has only one pair of SCSI ports. The D1000 has two pair and doesn't have the scsi adress dial (because each of the disks in the chassis respond on their own addresses). Instead you have some DIP switches to change the addressing behavior.
I tried to format the drives directly but they are not lists as devices such as ct1sd1 etc. and so this is not possible.
I have installed Sun Solaris 10 but could not communicate and reported inability to use rdriver and rdnexus and after reading a number of reports that driver hooks had been removed from the kernel in Solaris 10 I have installed Solaris 9.That's fine. You can ignore them. Neither the A1000 nor D1000 require those drivers. You should still be able to use 'rm6' or the CLI tools to interact with an A1000.
On both occasions I installed a number of RAID Manager 6.1.1 control packs, namely SUNWosafw, osar, osau, osamn and vtsse direct from my CD here.
I commanded dr_hotadd.sh to take up the challenge but it failed to communicate.
I added a number of Rdac amendments to rparams in /etc/osa but this did not resolve the issue.
I have tried to call probe-scsi-all after doing a reset-all from the OBP but this fails to report anything. I presume this is because the unit is connected by the interface card rather than a direct scsi disk.If the controller doesn't support the OBP environment, then yes, you won't see anything then.
dmesg pipe grep scsi reports:
unknown scsi sd0 at uata0 target 2 lun 0So that might be a single LUN from an A1000 controller. If the selector switch in the back is set to '2', then it's even more likely.
Darren

Sun Ultra 5 / Newbie Question

Hello. I am a student preparing for a career in Deskside Support. I recently purchased a Sun Ultra 5, so I could increase my experience with UNIX / LINUX. When the system powers up it goes through what seems to be a normal boot process and then keeps repeating the below error:
SUN, hme0 : No response from Ethernet network : Link down -- cable problem?
I am assuming that it is looking for some sort of a network connection. It is not on nor will it be on a network. I also have a copy of Ubuntu on the way, as I have heard this is a good source of LINUX experience. Does the forum have any thoughts or comments on what the error is saying and how to get rid of it?
2WheelsOver4

Here is some additional informaiton that I was able to capture from the boot process.
(Here is what I get when I boot.)
===============================================================
SUN Ultra 5/10 UPA/PCI (Ultra SPARC-11 333mhz), Keyboard present OpenBoot 3.15, 256 memory installed, Serial #********. Ethernet Address 8:0:26: a4:z2:1F Host ID....
Boot Device: disk File and Args
Sun OS Release 5.9 Version Generic ID 112233-48 64bit
Copyright 1992-2003 Sun Microsystems, inc. All rights reserved. Use is subject to terms.
Configuring IPv4 Interface hme0.
Configuring IPv6 Interface hme0.
Hostname lucky
The / file system (/dev/rdsk/...........) is being checked.
[the periods are place holders as I cant read the picture I took when it was going on.]
SUNF,hme0 no response from the Eithernet network & link down -- Cable Problem?
SUNF,hme0 no response from the Eithernet network & link down -- Cable Problem?
SUNF,hme0 no response from the Eithernet network & link down -- Cable Problem?
===========================================
It keeps repeating. I think it has something to do with it looking for booth instructions off the network it was on. I also feel one of the boot proms need reseting. It never gets to root / UNIX prompt. I can STOP -A and get to OpenBoot prompt and SETENV / PRINTENV and run baisc diag but no more.
When I reboot from OpenBoot with the "boot cdrom" command here is what I get.
==========================================
SUN Ultra 5/10 UPA/PCI (Ultra SPARC-11 333mhz), Keyboard present
OpenBoot 3.15, 256 memory installed, Serial #********.
Ethernet Address 8:0:26: a4:z2:1F Host ID....
Boot device /pci@1f,0/pci@1,i/*****/cdrom@2,0:f File and args
Evaluating boot cdrom
Can't open boot device
Boot device: disk File and args
SunOS Release 5.9 Version Generic_112233-01 64-bit
Copyright 1993-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to terms.
============================================

Sun Ultra 40 Suppl. CD V1.3 Bios + SLi Broadcast Aperture + Nvidia 91.29

I am using a Sun Ultra 40 with dual Opteron and dual Quadro FX 4500 in SLi-Configuration.
I just upgraded the Bios to the new release V1.3 and I just noticed an entry inside the Bios regarding the "SLi Broadcast Aperture". Following values are possible:
1. Disabled
2. SLi on Master
3. SLi on Slave
What is the recommended value for my system in order to maximize the performance? I assume the master is the first graphics card, but I would like to know the correct value.
Another issue I found out with the newest supplied Graphics driver on the supplemental CD by Sun (Nvidia V91.29), after startup the driver recognizes the sysem as an SLi-System but by enabling the SLi-support it is stated that the system does not have two identical graphics cards and SLi stays disabled. With the older driver on the supplemental CD V1.2 everything works fine. I have the doubt, that Sun was slightly to fast by releasing this driver?!
Anyhelp is more than welcome/needed and appreciated! For anybody intrested, the Sun Ultra 40 is an awesome system and for any heavy workload in CAD first choice!

Both of these problems are now documented on the X2100 server release notes (which wasn't the case when I originally posted the topic).
http://www.sun.com/products-n-solutions/hardware/docs/html/819-3722-15/
The problem with sharing the bge0 port between Solaris and the IPMI is a bug in the bge driver, fixed by patch 122028-02.
The problem with the bmc driver was more mysterious. Finally a note ("Adding SMDC Card Requires BIOS Flash") was added to the release notes web page. I had already upgraded my BIOS to the latest (1.1.1) revision, but re-flashing with the /cd switch as detailed in the note and performing a reconfiguration boot of Solaris fixed the problem.

Sun Ultra 3 Mobile Workstation aka Mezostation999 - lack of documentation.

Hello.
For a long time looking for documentation and drivers for this model.
I understand that without a service plan i will not get the drivers. But there is documentation available somewhere?
I'm really desperate - pre-installed Solaris 10 (03/05) works great. but I'd like to know more about this nice hardware and try to install a newer system(the problem is WLAN and VGA)
Does anyone have experience with Ultra3 and can help me?

Indeed, even the Internet archive does not contain much information on this topic.
I am surprised that there are no data on oracle.com about hardware who has not reached the end of the "Premier Support Ends."
http://www.oracle.com/us/support/lifetime-support/lifetime-support-hardware-337183.html
Unfortunately this is not the equipment produced by Tadpole. It's a completely different product produced by Naturetch. There were four models of the "Sun Ultra 3":
A60-UltraSPARC IIi (Tadpole SPARCLE)
CPU: 550 or 650 MHz UltraSPARC IIi
A60-UltraSPARC IIIi (Tadpole Viper)
CPU: 1.2 GHz UltraSPARC IIIi
A61-UltraSPARC IIi (NatureTech 888P)
CPU: 550 or 650 MHz UltraSPARC IIi
A61-UltraSPARC IIIi (NatureTech Mesostation 999)
CPU: 1.28 GHz UltraSPARC IIIi
As I mentioned in topic mine model is the latest. Unfortunately the company NatureTech no longer exists.
I spent a really long time search for drivers and documentation. I Even asked the people who had in the past had this laptop.
So... I have a month or two for purchase support. I feels that the only way to get the data I wanted(?)

CONNECTING TWO SUN SYSTEMS

I am new to sun sytems, I recently purchase two systems ultra 60 and sparc 20 I installed both solaris 7, I also have 8port hub, what I would like to know is how do connect these two systems, I don't want go to the outside world yet just home network.
I connect the two systems trough the hub i am getting a link I can ping the machine I am in it but Ican't see the other machine.
this is what I did configuring the network.
# If config hme0 plumb
#if config hme0 plumb 192.6.6.1 netmask+ broadcast+ up
then I went to
# vi /etc/hosts and added that IP address
# 192.6.6.1 micheal
unfortunately I can't see the other system

Make sure both machines are on the same subnet and of course, that they do not have the same IP address.
Unit 1: 192.6.6.1 / 255.255.255.0
Unit 2: 192.6.6.2 / 255.255.255.0

SUN ULTRA 45 fan to loud

It's posible to set a limit of the rpm of the fan or to set a variable rpm adjustment.
I have a SUN ULTRA 45 Workstation and my Problem is: when the fan is turn on only with maximum rpm.
The processor is to 10% used to capacity. The fan runns one minute and than stopt. 5 minutes late the same...
This fan is extrem loud, this isn't practicable in my office.

Yes : you need two little cables and a Sun .pkg software called fanctl. The cable installation on the motherboard is relatively easy, you can make that yourself. The soft needs no any parametrage, it works automatically after installation (pkgadd).
To obtain both cables + fanctl, the only way i know is to open a thread by the hotline of your country. Hopefully is your woikstation under garanty, otherwise maybe it's possible to get both paying ?

Sun Ultra 24 - BIOS Update problem

I have a Sun Ultra 24 where I attempted to update the BIOS to v1.5 using the Sun Tools CD v1.3. After successful install and validation of the BIOS, I am at a POST screen where I have the option to press F1 to load default values or F2 to run setup.
The problem is that my USB keyboards are not being recognized. I have tried all USB ports and two different USB keyboards. The system gives a beep, recognizing that the keyboards are being plugged in and out, and the Caps lock LED is lit for just a second, but after that it is not recognized.
The internal LED BIOS POST code is showing "85", indicating (from the Sun manual): 1. USB final initialization. 2. Switch screen back to text mode.
I have also attempted to remove and replace the BIOS battery.
Any other thoughts as to how I can recover my BIOS or get the system to recognize a USB keyboard? I do not have any PS2 ports on this system.
Thanks for any assistance.

I posted too soon, I was able to find another way to update the BIOS, and this worked. For some reason, my keyboard would not work earlier to enter the BIOS settings, but I was able to use Ctrl+Home to update the BIOS from my USB flash drive.
Here are the instructions from the Sun 820-2480-11 document:
Corrupted BIOS: System Does Not Perform POST
An interrupted or failed BIOS update, might result in a corrupted BIOS, which could
cause the system to fail POST and not boot. To resolve this, perform the following
BIOS recovery procedure:
1. Copy the file /BIOS/BIOSxxx.ROM from the Tools and Drivers DVD to the
root directory of a USB flash drive.
2. On the flash drive, rename the file BIOSxxx.ROM to AMIBOOT.ROM.
3. Insert USB flash drive into an available USB port on the workstation.
4. Power on the workstation, press and hold the Ctrl + Home keys, and watch the
USB flash drives access light.
5. When the flash drives access light starts to blink, release the keys.
6. Follow the onscreen instructions to recover system BIOS.
This procedure will be added to the Sun Ultra 24 Workstation Service Manual.

Unable to install Solaris Sparc 10 on SUN Ultra 10

Downloaded ISO of SPARC 10 DVD from Oracle site, burnt it and tried to install on SUN Ultra 10 (300 MGz / 256 MB RAM / 80 GB IDE HDD)
Followed the process as specified below:
1. Stop+A to stop the current boot process.(Already SPARC 8 is installed)
2. AT OK prompt typed boot cdrom
3. After some time (3-5 min) prompting error
*"boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:*_
Panic - Kernel : kmem64 allocation failure+_
Program Terminated+_
ok "+_
Checked in few blogs and burnt another DVD with less writing speed, still same error.
Checked with Sparc 8 CD's, Sparc 5.8 installing without any errors.

985393 wrote:
... (300 MGz / 256 MB RAM / ) ...I suggest you forget about trying Solaris 10 on a system with such limited resources.
If I recall correctly, Solaris 10 needs a minimum of 768MB of RAM to install and 1GB or more of RAM to run, even if you had a cpu that was fast enough to run anything.
Perhaps consider it this way:
Would you even dream of trying to install MS Windows 7 on a Pentium-I at 300MHz?
Stay with your Solaris 8. It's from the same late 1990's era as that hardware and fits it just right.

Solaris 2.6 upgrade to version 8 on SUN ULTRA 10

Dear Mr. or Mrs:
I met the same question as uxdms who left the message on Dec 20,2001.
When I was trying to upgrade from solaris 2.6 to 8 release , there is "failed" warning and the upgrade isn't created.
There is a detailed info:
Mechine: SUN ULTRA 10
Media:
Solaris 8 installation -- SPARC Platform Edition
Solaris 8 software 1 of 2 -- SPARC Platform Edition
Solaris 8 software 2 of 2 -- SPARC Platform Edition
Installation step:
Accordidng to the guide of installation, run step by step,
and there are some special steps below:
(1) use the /dev/dsk /c0t0d0s4 as disk slice to upgrade.
(2) selet networked
(3) don't use DHCP
(4) disable IPv6
(5) no NIS+, NIS, DNS ..
.... displaying the wolcome to solaris dialog box
(1) Solaris 8 installation SPARC Platform Edition is ejected.
(2) prompted to insert the Solaris 8 software 1 of 2.
(3)After selecting serial the dialog box of the upgrade..
(4)system prompted upgrading...
initialation is done.
Checking file system is done.
(5) There is a installation summary displayed:
installation summary
The solaris installation status is shown below
product status infor.
Solaris 8 software Failed Detailed(button)
After click the Detailed button, there is a dialog box
Failed:
Log file: /a/var/sadm.system/logs/upgrade_log
Question is:
I can't find the file of upgrade_log , and the webstart install stops on it.
I appreciate for your kind help
Melanie
the webstart install stops on initalization -- with 'failed' warning

Hi,
If this problem is reproduceable, provide me the exact console error (failed) message to further investigate on this issue.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support

Ethernet two sun ultra's (5&10)

Similar Messages

Maybe you are looking for