Ethernet was gone suddenly.
Hello everyone:
I'm experiencing a strange phenomenon which began yesterday.
I have three macs in my home; 1 mac mini, 1 mac mini server, and 1 macbook (pro). They were purchased within 1 year, and softwares were updated recently.
Until the event, the network had worked very fine. Details are Time Warner Cable modem (I have no idea on the model no.), Belkin wireless router, all of three macs were connected both through the wirelessly and wirely. I didn't have any problems in network setting.
Yesterday morning, I found that there's no wifi and no ethernet working in home.
I tried to reset the Belkin router... but failed to recover it.
I replace it with Axler 8-port ethernet hub (made by LG), which had been working fine previously before I purchased the Belkin.
---> Oddly enough, only one port is working which is connect to the macbook.
---> In network preference of mac mini server, it appears 'ethernet cable unplugged'!!
---> In network preference of mac mini, it appears 'no ip address'.
Port number seems not important. Only the macbook can find the proper network connected to any port of ethernet hub. But others cannot.
This phenomenon persisted when removing the macbook from the hub. Other macs can never establish the proper ethernet networking. Before yesterday, all is fine and there's not any problem in networking.
I need your urgent help.
Thanks.
Younsuk.
experienced same problem on iMac this morning ( also just updated to 10.6.8 )
System profile even said there was no ethernet card installed
I reset the PRAM and that clear everything up.
instructions below from Apple.
RResetting PRAM
A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
To reset your computer’s PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Similar Messages
-
I was creating an iWeb page, had been working for hours, I suddenly got a blank screen and it was gone. Can I recover my page?
hmmm. it might be worth checking through the following document:
Fifth Generation iPod has a blank backlit display and beeps 3 times -
hi,
introducing my name is Tahyan Tatah, you can call me Tata
My bos has ipad 2 with ios version 4. He had upgraded the ios become 5, suddenly his data was gone.
Is there any some tools to recover his data.
Thanks
Regards,
Tata
<Edited By Host>No, it will still stay as IOS 7.0.4
-
My phone suddenly stopped working...one day i couldnt use my phone to make calls because the speaker and mic stopped working then i noticed the touchscreen speaker button that apears first when you make a call was gone. Only way I can use my phone is with the hands free kit. I brought it in to AT&T and a wireless reapir shop to replace the speaker and mic and that didnt help any. HELP!
Post relates to: Treo 680 (AT&T)The microswitch in the headset jack may be stuck.
Click on the following link for the forum post regarding this issue. Thanks to Super Contributer, DTfromBH.
http://forums.palm.com/palm/board/message?board.id=hardware&message.id=31143&query.id=113582#M31143
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo680att/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705 -
Hi,
I have only just upgraded to iOS 7 on my iPhone 4 and am having a problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
So to questions:
1) Why is my activation not working under my referenced australian number?
2) Can I recover all my message history which should be saved in my itunes backup? I am willing to revert to this backup state again if needed.
Please help.
Thanks.Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
Not a question. A comment actually. Regarding the persistent blue autofill box that may appear in Safari, my wife shut down the iMac then unplugged it for a few minutes. On restarting, the box was gone.
Do you have a question?
-
I made a mistake by pressing autofill on my hp windows laptop and all of my music was gone from itunes and my iphone 5s, how can i get my music back onto my iphone 5s?
Have you checked to see if the media files are still on the computer? See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Can you help me on something? I restored my iPod and everything I had was gone. (What I Wanted) But then when I looked at my Usage It said I only have 22.5 GB Available and I Used 6.0 But I didn't. I also looked at my Backup storage and it still had all of my backup from before I restored. I deleted all my backup because it said I used all of my Backup Available. And now when I try and backup it says there is no more room or whatever to backup and Its 5/5.
You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I left my iphone in a bathroom last night and it was gone this morning when it was unlocked. I notified the police and no one turned it in. How do I find where it is located? Also, how do I find my serical number? I went to itunes on my macbook but could not find a preferences or devices button. Finally, I know my password but don't know my apple id. How do I find it?
Answered here:
https://discussions.apple.com/thread/6157706?tstart=0
Don't double post.
To locate the SN:
http://support.apple.com/kb/ht4061 -
please help I need to open my my lightroom to edit and it says lightroom catalog cannot be opened bc another application already has it opened.... I went to download the update but computer went dead when came back on it was gone so I reinstalled. now wont open but ps will help birth session to edit
Make sure you don't have another copy of Lightroom actively running on your computer. If not, find your catalog file in Finder/Explorer. Look for a file with the same name, but with a .lock extension. delete that file. Now Lightroom should open the catalog again.
-
how do i retrieve all my info, photos, numbers, notes that were on my phone prior to my plugging it into my computer to update it?...it started to sync with itunes and when it was finished. everything from 8/2011 to current was gone. Please help!
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your phone. Then you will go through the setup screens again as you did when your phone is new, and when given the option, select Restore from iCloud Backup. -
I downloaded pics to my pc and after all my music was gone from my phone . I have repeatedly tried to sync to my iTunes but it tells me it cannot be synced to my iPhone. What's going on? Any suggestions?
Yeah everything is gone for good. The apps won't be a problem. You can just redownload them. For the music find a program that copies the music from the iphone to the computer. Then add the files to itunes ans sync.
-
Help! My computer locked-up and had to be rebooted. However, when I restarted it and hooked up my iPod, I noticed my existing iTunes library (all 450 GB of it) was GONE and was replaced by a brand new library. Fortunately my old, 450 GB library is still on my hard drive under iTunes in Windows Explorer. How or why could this have happened, and most importantly how can I restore my old libary without having to manually import allow of my music and hundreds of Podcasts and 16000+ podcast files?
Thanks for any help....What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge... -
I turned off my data usage and when I turned it back on, the personal info was gone. No email, contacts. How do I get it back? I'm afraid to do any kind of reset with out knowing what I'm doing.
i see i have 17 views, 0 replies. what more can I tell you to help me?
-
I logged in to pay my bill via the app yesterday and my stored form of payment was gone. Since I wasnt at home I didnt have access to my checking account now nor a credit card. This is the first time in 14 years that my online account has had this issue and NO my stored card is not expired. My payment is now going to be late and i was going to get a new phone oin the Edge plan too. Am I going to get charged a late fee and does tgis affect my eligibilityafter 14 years of on time payments! And why did you wipe out my stored payment info?
Ratwurkz,
Oh my goodness! That is not what we like to hear. Were you able to log in online not through the My Verizon App? Did it show the card available in there? Is this the same card that you have used for past payments? Let's look a little closer.
RobinD_VZW
Follow us on twitter @VZWSupport
Maybe you are looking for
-
Deletion of record from z table
Hi, How can I delete or update a record directly from Z table. Are there any implications in deleting the record directly. Thanks, Waqas Rashid
-
Printing Goods Receipt Quantity Deviation
Hi Gurus, I want to print report after Goods Receipt with quantity deviations. I tried to use MLMD Output for this but nothing heppened. I define my smartform and add to MLMD, and still nothing. Any example or tutorial or note? I'm working on ECC 5.0
-
Can't use time machine star wars interface in Yosemite
Since upgrading to Yosemite I can't get the standard user interface to work with time machine. When I enter time machine it looks normal (although there aren't any stars anymore), but there aren't any file to restore. I can scroll back in time, but
-
Does WebLogic 5.1 Support EAR Files
In the WebLogic 5.1 online documentation I have been able to find a section on Web Application (WAR) examples, but I have not found any reference to support for Enterprise Application (EAR) examples using the search capabilities implemented with the
-
Reload same jar file of diffrent version
Hi Freinds , I have used the code below for loading the jar at runtime, but I need to reload the same jar of different version during runtime with out restarting my apllication. is it possible, if yes Could you please help in that ? public void addUR