ETM Training

Dear All,
Our Client is implementing industry specific Solution EC&O. Please let me know the availability of SAP ETM training. Your reponse is highly appreciable.
Thanks in Advance.
Regards,
Dev

Hi Dev,
The Official training for ETM is available only in Germany. You may see the Education calander of SAP Germany. Here you will be able to find 2 courses WDETM1 & WDETMC each of 4 & 5 days.
Hope this of use to you.
MLN Prasad

Similar Messages

Automatic email confirmation in Training and Event Management

Hi All,
I need to change the Subject and also need to CC the email on customer class registration auto-confirmation.
Already configuration has been done to send email when a customer register for training class. But right now the cofirmation email is sent only to the customer but client wants the confirmation email to "CC" to Tranining department also and also they want the "Subject" of the email to be changed.
I am new to TEM module so, I don't know where the set up needs to be done for the "Subject" and "CC" of the email. I found the Sapscript form which contains the only the body of the email. I found in IMG- TEM >Day-to-Day Activites> set up for sapscript form & notification abbrev (BUCH).
Please can any let me know where to change the "Subject" of the confirmation email and where to set up the "CC" address for the email?
Thank you in advance!
Sonali.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

TEM and FI/CO (Training and Event Management)

Hi All,
I wish to track actual cost per event in PE (TEM - Training and Event Management). Was considering having a Internal order per Instance of event. Have any Idea on how to set up something like this?
Appreciate all ideas,
LB

Hi Dean,
using internal orders you have to consider that sending and receiving cost center have to in the same company code.
If you do not want to distribute the costs to FI/CO but only report them, you can use the cost items provided by TEM. We have set up something similar for our plants in South Europe.
We have created some cost items and fill them manually with the training costs. Additionally we have created a report that evaluated this costs and combines them with the employee costs (derived from salary).
Best regards
Michael

Wrokflows in HR :Training and Event Management

Hi,
I need to enable the Standard Workflow PE_APPROVE01 (Approve Employee's Attendance Booking) which needs to be triggered once an Employee requests for a Training via Trnx: PV7I.
I enabled the event linkage via SWETYPV and also the binding in the Triggering event of the WF.
Event REQUESTED of Object PDRELA_025.
But, when I execute the Trnx: PV7I and debug, I see event CREATED of Object ATTENDANCE being triggered in the FM SWE_CREATE_EVENT.
Also, I need some information on the Table T779W which stores rules(FM to be executed in a particular scenario). For all T&E, object PDRELA_025, I see the rule as "HR_EVENT_TRAINING_NOTIFICATION".
This Fm is called via PV7I and this FM calls SWE_EVENT_CREATE which is using the event CREATED of Object ATTENDANCE.
Do I need to change this setting, and create my own FM to trigger the Event REQUESTED of Bus Object: PDRELA_025?
Please suggest.
Thanks,
Suryakiran D.

Hi,
Did anyone get this to work? I am having trouble triggering workflow for PE_APPROVE01 (Approve employee's attendance booking).
I have created entries in table T779X (through SWEHR3) as:
E 1001     A025 *     BOKF     0     PDRELA_025     REQUESTED
E 1001     A025 *     BOKP     0     PDRELA_025     REQUESTED
E 1001      A025 *     BOKW     0     PDRELA_025     REQUESTED
E 1001     A025 *     CNOW     0     PDRELA_025     DELETEREQUESTED
E 1001     A025 *     CPRB     0     PDRELA_025     DELETEREQUESTED
...but as soon as it calls function RH_OBJECTKEY_BUILD, it fails and doesn't create the REQUESTED event.
As the key field for AttendeeID in object PDRELA_025 references OBJEC-REALO, function RH_OBJECTKEY_BUILD tries to find a corresponding field in structure PPKEY to create the object key. As it can't find this field in PPKEY, it fails and doesn't create the REQUESTED event. Is there something I've done wrong?
thanks
Jason

Course Catalog in Training and Event Management

Hi TEM Gurus,
My client wants that users can see only courses of training and event management business catalog in ESS, they can't book or do any activities related to TEM. How we can put restriction for that requirement. We are using ITS services PV7I and PV8I.
Could you please update me as early as posisble ?
Thanks and Best Regards
Puneet

Hi Dear,
Thanks a lot for quick reply. Could you please give me details inofmration .. How to do changes in the system..
How to disable book and cancel functionality from the portal.
Thanks and Best Regards

SAP HCM Training and Event Management

I am setting up this functionality to track training records and show them as fulfilling qualification needs. From what I can understand from my research, you execute PV15 Follow up to create the history records and match to qualifications. However, I must be missing something because nothing is done. I enter the business event, select historically record business event and then click on data screen. I get the following:
Qualifications to be transferred
Attendee                       Qualification               Proficiency
No qualifications were found which could be transferred
Actions for attendances
Attendee                    Relationship                Business event/           Action
                                                        Business event type
No actions have been defined for attendees with regard to relationships
Other actions
Historically record business event
Confirmations of attendance: no automatic function has been defined
Yet I set up qualifications. Can you give me a direction or some resource to goto on this?

Hi,
You have to maintain relationship (valid period) called u201CImparts 028u201D between course type object D and qualification Q to be impetrated. As result in follow up process system will show you the qualification to be transferred to employee qualification master data pa0024.
Regards
Nawaz Khan

BAPI for training and event management

Hi all,
I need a bapi that returns the list of the attendees of a training course.
I've seen that a FM exists: RH_GET_PARTICIPANTS and i know how it works.
I would like a standard BAPI to be called by an external system.
If it doesn't exit I will create a remote FM that calls the RH_GET_PARTICIPANTS.
thanks
enzo

Hi Enzo,
I don't think there is a BAPI.. but you can create one using the Method 'Display Attendance' for the 'Attendance' Business Object (PDRELA_025) in Tcode BAPI. But I think creating an RFC that in turn calls RH_GET_PARTICIPANTS is the easy way out.
Regards,
Suresh Datti

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Regarding training and event management queries

hi experts,
in my company we have ess in which training and event management module is working fine.i need to develop a report in which training booked against employee through tc-psv1 means in sap-r/3 and through ess means tc-pv8i will come.means saggregation for sap r/3 and ess will come.
please help me regarding this.
how will i identifie that training has been booked against employees through sap r/3 or ess on what paramenet we will identifie.
plz help me....
is there any function module;....

solved by own

Need Report in Training and Event Management

Dear All,
I want a report in Training and Event Management consisting of attendee name and training date and venue details, price for training event and would like to know any standard report available.
Kindly let me know the std report name.
Thanks and Regards
Suresh,V

Hi!
for all reports try T-code : SAP1 ( Report Selection ) & SAP2 ( Info catalog ) here you will get all the standard reports available for that module .
Regards
Sheetal
Edited by: sheetal Gulati on May 14, 2009 7:51 AM

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Email on Training and Event Management

Dear all,
I would like to know are there any email supported in Training and Event Management Module.
For example, after HR administrator help book courses for staff, system will trigger an email notification to staff mailbox with certain course detail information
Regards
Bill

Hi Bill,
In your case the event for triggering the email notifications will be when the booking is done. So before booking, for the object like Business event type and/or business event group some relationship exits. Once you do a booking of course, additional relationship will be created in different objects. Not exactly sure about the relationship code, but you can easily find out from hrp1001.
So yoor program will check for this partcular relationship, and if it exists then will send mail notifications.
Thanks!
Regards,
Chetan Shriraj Wahane

Training Need - TN in Training and Event Management

Hi
Did any one worked on Training Need (TN) in Training and event management? I have the below question.
For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost. So where to record the training cost of the employee in Training and event management and is there any link with payroll.
Logically it sounds as it does. but where and how is it connected with payroll.
Please revert if you know the solution.
Brs
Kenu.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

ETM Training

Similar Messages

Maybe you are looking for