EU_IMPORT5: DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1017
Hi,
The upgrade is on phase EU_IMPORT5 and it seems to run for a long time. But am afraid it this is really true. When I look in the file: E000006.DPR I find the following:
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1017
DbSl Trace: CONNECT failed with sql error '1017'
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(SQL) INFO: SSEXC.SQL not found
(DB) INFO: DOKHL~ created #20081003122232
(IMP) INFO: import of DOKHL~ completed (2185665 rows) #20081003125935
(DB) INFO: DOKHL^0 created #20081003125948
(DB) INFO: DOKIL~ created #20081003125949
Is this means that it stoped?
Thanks in advance
HanseAtik
Hi,
Check in SAPup.log if you're not requested to do an action .
You'll probably see
>Continue ?
>Exit ?
If yes, just stop SAPup and restart, you'll be asked again.
Hope that was helpfull.
Similar Messages
-
Getting error with DbSl Trace: OCI-call 'olog' failed: rc = 1017
Hi,
We are working on osdbmigration, exporting from oracle to SQL Server.
When we run ./R3SETUP -f DBEXPORT.R3S getting the below error:
INFO 2011-06-10 05:17:46 R3SZCHK_IND_ORA R3ldctlDo:0
DbSl Trace: OCI-call 'olog' failed: rc = 1017
DbSl Trace: CONNECT failed with sql error 1017
We have performed allthe pre-checks successfully and can able to connect system/manager at SQL.
Regards,
Karthik.Have you followed the Note 400241 - Problems with ops$ or sapr3 connect to Oracle
-
<p>Hi, Help me I cannot execute a job from the designer (Data Integrator).
The trace log only display immediately : </p><p>OCI call <OCISessionBegin> for connection <orcl> failed: <ORA-24327: need explicit attach before authenticating a user></p><p>
Loaded Oracle Client library OCI.DLL is in the path: C:\oracle\product\10.2.0\db_1\bin\OCI.DLL.
Loaded Oracle Client library is in the path: OCI call for connection failed:</p><p>Any suggestions? Thanks</p>I have the same dificult, Help me please!
-
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy ChapmanTry to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OCI-call 'olog' failed: rc = 1034, CONNECT failed with sql error '1034'
Hi
While starting the SAP from mmc I can see these error messages in dev_w0 file .
Any please could help us.
Sukrut SHi Sukrut,
¿Is your DB running? If not, ¿Any recent change to the init.ora?
And, if it's yes: ¿Have you changed something at adm user's environment since last startup? ¿Can you run a "R3trans -d" and send the output from r3trans.log?
Regards,
JC Llanes. -
SubTemplate call is failing with XML-22002 error
Hi,
I am using Oracle BI Publisher 10.1.3.4 in WebLogic Server 10.3.6.0.
Subtemplate reference is used in some reports. Whn we click on view of such report, below error is shown.
"The report cannot be rendered because of an error, please contact the administrator."
The patch 9017232 is also installed.
The detailed error log is below:
[111413_123806333][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
<Line 3, Column 71>: XML-22002: (Fatal Error) Error while processing include XSL file (xdoxsl:///FCReports/HeaderFooter_LandScape.xsb).
<Line 78, Column 312>: XML-22008: (Error) Namespace prefix 'ref' used but not declared.
@Line 3 ==> <xsl:import href="xdoxsl:///FCReports/HeaderFooter_LandScape.xsb"/>
[111413_123806337][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:91)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:276)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:82)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:554)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:257)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:97)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:614)
... 38 more
Syntax used in Report is
<?import:xdoxsl:///Reports/HeaderFooter_LandScape.xsb?loc=en_US><?call@inlines:Header?><?with-param:PM_REPORT_NAME;string('Customer details report')?><?end call?>
XDO.CFG file contents
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<properties>
<property name="bursting-multithreading-on">false</property>
<property name="xdk-secure-io-mode">false</property>
<property name="xslt-scalable">true</property></properties>
</config>
Please suggest whether this issue is with BI report setup.
Thanks in Advance.
Regards,
Bala.Hi Surya,
Would you let us know from where you are calling web service and for what?
And if possible provide error log as screenshot or txt file. So that it will be easy to trace issue.
For gland your issue, go through below posts
Not able to execute MII Transaction as web service
Error calling BLS Transaction as Web service
Problem in generating wsdl ?
Create MII transaction & MII Web Service and consume them in ABAP
Regards,
Praveen Reddy -
TT ReadOnly Group fails with ORA-1017
Please help...
I actually got this to work at one point about a week ago. I opened an SR# to explore all the setup aspects of the accounts. Trying to create a simple readonly group now fails:
Command> connect "dsn=HrData;uid=hr;pwd=....";
Connection successful: DSN=HrData;UID=hr;DataStore=/tmp/HrData;DatabaseCharacterSet=WE8ISO8859P1;ConnectionCharacterSet=US7ASCII;DRIVER=/oras/u01/app/tt701/product/7.0.1/TimesTen/tt70/lib/libtten.so;OracleId=oemprod;PermSize=200;TempSize=200;TypeMode=0;
(Default setting AutoCommit=1)
Command> call ttcacheuidpwdset('ttsys','ttsys');
Command> call ttcachestart();
Command> create readonly cache group hr.cg_readonly_sample_data
autorefresh interval 1 second
from hr.sample_data(
samp_id number(10) not null,
weight number(38,2),
primary key (samp_id));5213: Bad Oracle login error in OCISessionBegin(): ORA-01017: invalid username/password; logon denied rc = -1
5131: Cannot connect to Oracle database: connect_string = "oemprod", uid = "HR", pwd is hidden
The command failed.
I have checked all account logins to oemprod and they work AOK.
thanks for any suggestions to resolve this problem.
Henri Tuthill, DBAI don't see an attribute 'OraclePWD' in your connect string. When using Cache Connect, you are effectively connecting to both TimesTen and Oracle. You need the right usernames and passwords for both. In addition, certain cache connect operations (such as AUTOREFRESH) atre perforemed using a different Oracle username/password.
So, firstly you must establish a suitable oracle username/passowrd to use for the background operations. You do this using the ttCacheUidPwdSet() builtin. The values passed to that must be a valids Oracle username/password with the appropriate priviliges for the tables you are caching (see the docs for more details).
Next, you must have a TT user created for the userid you will use to connect to TT (so you should have installed Tt with Access Control enabled...). Since Tt uses the same userid to connect to Oracle this username should match the main one you are using in Oracle. In this example it looks like the username is 'hr', which is fine. The password used to authenticate this user (hr) in TT is provided by the PWD attribute in the connect string. However, Tt also needs ot ocnnect to Oracle as the user 'hr' and we recognise that the password in Oracle may be different so you also need to tell us the Oracle password for user 'hr' by including the OraclePWD=<somevalue> in the connect string. For example:
connect "DSN=HrData;UID=hr;PWD=tt_password_for_hr;OraclePWD=oracle_password_for_hr";
Hope that helps,
Chris -
DbSl Trace: CONNECT failed with sql error '12518' at IMPORT ABAP
Hi
We are trying to install ECC 6.0 on windows 2008 SP2 and oracle 10.2.0.4. We get an error at IMPORT ABAP phase.
content of import_monitor.java :
java version "1.4.2_26"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_26-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
content of SAPSLOAD.log:
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100705173108
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100705173108
content of sqlnet.log file:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleUED)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=UED)(CID=(PROGRAM=E:\oracle\UED\102\bin\sqlplus.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.4.0 - Production
Time: 05-JUL-2010 16:19:39
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=u34ssapued)(PORT=1527))(CONNECT_DATA=(SID=UED)(GLOBAL_NAME=UED.WORLD)(CID=(PROGRAM=E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.2.0 - Production
Time: 05-JUL-2010 17:28:38
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Best Regards...,Hi,
TNS-12560: TNS:protocol adapter error
Probably your listener or database is down...
If both are running, just stop the installation and reboot the server.
Then again start listener and database and continue SAP installation with "Continue old installation" option..
Also make sure that below environment variables are set properly...
ORACLE_HOME
ORACLE_SID
DBSID
Regards.
Rajesh Narkhede -
ERROR = CONNECT failed with sql error '1017'
Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 30 08:58:14 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3857 0.003857
4 ETW000 [dev trc ,00000] using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000 22 0.003879
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003888
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 18 0.003906
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 143 0.004049
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 16 0.004065
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.004090
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004108
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.004137
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.004153
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.004168
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 18 0.004186
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 223 0.004409
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 6714 0.011123
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 0.011146
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2397 0.013543
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPRP1's password 16 0.013559
4 ETW000 [dev trc ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 22 0.013581
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 18 0.013599
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 109 0.013708
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 6894 0.020602
4 ETW000 [dev trc ,00000] Allocating server context handle 14 0.020616
4 ETW000 [dev trc ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000 37 0.020653
4 ETW000 [dev trc ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000 21591 0.042244
4 ETW000 [dev trc ,00000] Allocating user session handle 32 0.042276
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 32 0.042308
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 34551 0.076859
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23657 0.100516
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 13 0.100529
4 ETW000 [dev trc ,00000] Try to connect with default password 12 0.100541
4 ETW000 [dev trc ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 17 0.100558
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.100574
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 18 0.100592
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000032B808
4 ETW000 15 0.100607
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000032B808
4 ETW000 23 0.100630
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 18 0.100648
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 3281 0.103929
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 19 0.103948
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 10 0.103958
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#5 @ 431]
4 ETW000 10634 0.114592
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000 17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TQ1'"Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede -
DbSl Trace: CONNECT failed with sql error '12170'
Hi,
I'm having this problem during installation of DB instance. I already installed Oracle patchSet. Could you some tell me what could be the issue.
SAP Release: NW 2004s SR1
SAP Variant: ABAP
OS: Solaris 10 64 Bit
Oracle: 102_64
INFO 2006-11-16 11:32:19
CJSlibModule::writeInfo_impl()
Output of /usr/sap/RED/SYS/exe/run/R3load -testconnect is written to the logfile R3load.exe.log.
WARNING 2006-11-16 11:47:19
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/RED/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/RED/SYS/exe/run/R3load: START OF LOG: 20061116113220
/usr/sap/RED/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/RED/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Apr 1 2006 03:18:31
/usr/sap/RED/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/RED/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/RED/SYS/exe/run/R3load: END OF LOG: 20061116114718
ERROR 2006-11-16 11:47:19
CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/RED/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2006-11-16 11:47:19 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step testDatabaseConnection with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Thanks
TorpedoHi ram
Just brief ur Env please ..
If you are receiving the ora-12535 error from tnsping as well as sqlplus, the client box is probably unable to find the listener for whatever reason. If the listener is definitely running and you are able to ping the listener's address from the client box but still can't tnsping it, you are probably running into a firewall issue.
The reason for this is that with tnsping failing you are probably timing out before the connection gets to the listener. You can verify that the listener is running by checking the status in lsnrctl or doing a loopback connection through it. You can verify that the listener's address is visible to the remote box by pinging it from the remote box. Firewalls generally filter by port number so this is the next logical thing to check. If the remote connection passes through a firewall and the listener's port has not been opened up you will see this error.
regards
Vinod -
After connection lost SetVector fails with OCI-22303: type not found
Hi there,
I use statelessConnectionPool and after application is loosing connection to oracle for short time, all folowing setVector calls will fail with
SetVector fails with OCI-22303: type "DEMO"."PROPERTIES" not found
however its there and was working fine before connection was lost,
As far as i read about the getConection for statelessConnectionPool will reestablish connection if required to return valid connection handle, but somehow the setVector does not work.
Any idea?
Thanks in advance
AndrewHi,
I want to reconnect to same instance, I think i missed tnsnames part, did not knew its required, so i should add to client tnsnames or server the FAILOVER_MODE part?
like this example:
PAYROLL =
(DESCRIPTION =
(ADDRESS =
(COMMUNITY = TCP.world)
(PROTOCOL = TCP)
(HOST = VSERVER)
(PORT = 1521)
(CONNECT_DATA =
(SID = HR)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 15)
strange thing that connection seams to be valid only in complains about type not found, or maybe connections are not valid only i cant see it, does the not valid connections in the pool are reconnected or make new when i call GetConnection? or i should terminate connections on "end of comm channel error" so when db is reachable again it will reestablish new connections?
Andrew -
Jabber call to voice mail fails with fast busy over VPN
I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………
-
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
CONNECT failed with sql error '1017'
Hello,
nus650pa:dv8adm 23% more trans.log
4 ETW000 R3trans version 6.05 (release 46D - 12.07.06 - 16:40:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 date&time : 14.08.2014 - 16:58:18
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [developertra,00000] Thu Aug 14 16:58:19 2014 170924 0.170924
4 ETW000 [developertra,00000] db_con_init called 1225 0.172149
4 ETW000 [developertra,00000] create_con (con_name=R/3) 22426 0.194575
4 ETW000 [developertra,00000] Loading DB library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' ...
4 ETW000 136 0.194711
4 ETW000 [developertra,00000] load shared library (/usr/sap/DV8/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 369207 0.563918
4 ETW000 [developertra,00000] Library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' loaded
4 ETW000 174 0.564092
4 ETW000 [developertra,00000] function DbSlExpFuns loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 694 0.564786
4 ETW000 [developertra,00000] Version of library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' is "46D.00", patchlevel (0.2186)
4 ETW000 15725 0.580511
4 ETW000 [developertra,00000] function dsql_db_init loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 60 0.580571
4 ETW000 [developertra,00000] function dbdd_exp_funs loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 121 0.580692
4 ETW000 [developertra,00000] New connection 0 created 96 0.580788
4 ETW000 [developertra,00000] db_con_connect (con_name=R/3) 14511 0.595299
4 ETW000 [developertra,00000] find_con found the following connection for reuse:
4 ETW000 53 0.595352
4 ETW000 [developertra,00000] Got ORACLE_HOME=/oracle/DV8/920_64 from environment
4 ETW000 73038 0.668390
4 ETW000 [developertra,00000] -->oci_initialize 589 0.668979
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment 56 0.669035
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000 52 0.669087
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 0.669120
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ... 91 0.669211
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8') 999 0.670210
4 ETW000 [developertra,00000] Thu Aug 14 16:58:20 2014 245280 0.915490
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 263 0.915753
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 858 0.916611
4 ETW000 [developertra,00000] Try to connect with default password 38 0.916649
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000 53 0.916702
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000 46 0.916748
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 118256 1.035004
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 86 1.035090
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment 716 1.035806
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000 55 1.035861
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 1.035894
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ... 29 1.035923
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8') 28 1.035951
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 126719 1.162670
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 165 1.162835
4 ETW000 [developertra,00000] Try to connect with default password 36 1.162871
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000 47 1.162918
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000 42 1.162960
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 123784 1.286744
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 70 1.286814
4 ETW000 [dblink ,00627] ***LOG BY2=>sql error 1017 performing CON 1140 1.287954
4 ETW000 [dblink ,00627] ***LOG BY0=> 42 1.287996
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DV8'"
Please help.
Thanks
Priyanshu SrivastavaHi
Could you check this SAP Notes Error message
"ORA-01017: invalid username/password; logon denied
BR310E Connect to database instance DV8 failed"
1576837 - ORA-01017: invalid username/password;
1860519 - SAP fails to connect to the database
BR
SS
Maybe you are looking for
-
Error 16 when installing Acrobat XI Pro
I recently purchased Adobe Acrobat XI Pro for Palomar Audubon use. While installing on a PC running Windows 8.1 I received an "error 16" message instructing me to uninstall/reinstall the program. Since then I have been informed that 1.) the entered s
-
/var/lib/pacman/local empty
Hello all, I've been using Arch for a few years, but I obviously haven't learn't anything in the process as I've done a very silly thing. I wanted to empty the pacman cache at /var/cache/pacman/pkg, but instead I did 'sudo rm -r /var/lib/pacman/local
-
How I can generate a file CSV ?
I need generate in CSV Date,Time,Tag1,Tag2,etc. Attachments: Toneleria04May02.zip 187 KB
-
loader requests cd but it's already in
-
Importing a quicktime movie?
I have tried file>import movie. The movie is greyed out. Can you help?