Eu_role not showing up for all users in EP7

Hi SDN,
I have newly deployed EP7, I want all users to have EU_Role but but its not showing up even though i have added eu_role to everyone group.
i do see eveyone group attched to all users but it does not show up eu_role to it.
Am i missing anything in EP7 Configuration.
Thanks
DK

Hi,
Go to everyone group and click the tab 'assign role'
Search for the eu_role recursively(check the box recursive before search). otherwise all roles will not show up.
Hope that helps you
Raghu

Similar Messages

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

Some asset classes do not show up for a user in S_ALR_87011990

Hi
When the asset history sheet is run in S_ALR_87011990, a user is unable to display some asset classes in the report. This was referred to security team. They say that everything looks fine and nothing appears wrong for that user--roles and profiles ok etc.,. No worklists are being used and no variants are being used. No dynamic selections either.
Can someone let me know why the user is unable to display some asset classes. Asset classes that the user is unable to display were created last year. Most users are able to display these asset classes in the report except this user.
Please help and provide some exact solution.
Best wishes
Rajmohan..

Hi Rajmohan,
most probably it is a authorization problem.
Please compare the assets which are not shown with this user. It could be a cost center.
regards Bernhard

My favicons are not showing up for all my imported bookmarks as well as certain current bookmarks and when I open the about:config it says "browser.chrome.favicons;false". Shouldn't this be true and how to I change it?

I had to rebuild my computer and when I imported all of my bookmarks they had no favicons. I started getting some of the favicons when I would go to the websight it would reconnect, but now I can't seem to see almost any of them. I did a search on Google and one tech site suggested the about:config file and that the "browser.chrome.favicons;false" should be set to true. But when I toggle it to true and restart Firefox it is once more set to false. I know it doesn't seem like much, but it is really annoying not having those favicons.
Help me Obi Wan Firefox you are my only hope.

The browser.chrome.favicons preference should be set to true, as it is not retaining the value when you restart Firefox, see the [[Preferences are not saved]] article for possible causes.

Checkboxes in BI Publisher not showing up for all reports

Hi everyone,
I followed the instructions (uploading fonts, checking the checkbox font property e.t.c) for displaying checkboxes (without the diamond shape) in my BI Publisher reports. It worked for 1 report and still does. Unfortunately the new reports I have uploaded still display the diamond shape. I find this very odd even though followed exactly the same process for all of my reports.
Is there a way to make sure that checkboxes display properly for all reports? Could there be a mistake I have made and that I am missing out on. Any thoughts will be appreciated.

Have you set the properties as per
http://blogs.oracle.com/xmlpublisher/2007/05/wherere_my_checkboxes.html
especially
1. The font location, we need to tell the publisher engine where the Wingdings font is located:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="c:\windows\fonts\wingding.ttf"/>
</font>
2. The glyphs to be used. Here we specify the font family name ie 'Wingdings' and the 253/254 glyphs
<property name="rtf-checkbox-glyph">Wingdings;253;254</property>
Do ensure that you use the same glyph character codes defined in ur config and RTF

Request Offerings not showing up for custom User role in SMPortal

Hello All,
I've created a custom End User role and scoped it to the domain users group.
To this role I want to show a specific set of Request Offerings on the portal
For that Purpose I created a new Service Offering and added these Request Offerings to it.
I then went on to create a Catalog Group and added the Service Offering to it.
I then created the custom user role based on the EndUser role and allowed them to see all Forms, all Queues, All CI's and on the Catalog group I select that they could only see the Catalog Group which I just created.
I then logged in into the SMPortal and was expecting that my Service Offering would be shown to them.
However, they don't see the service offering.
What could cause this?
Is there something I'm missing?
Thanks in advance!
Filip

You have to add the Service Offerings and the Request Offerings in the Catalog Group. Nesting doesn't work because Service Offerings and Request Offerings are different types of objects.
This offers the option the manage the access to Service Offerings and Request Offerings very granular if needed. For instance you can control access to a Service Offering in one Catalog Group related to one user role (A) and use two additional Catalog Groups
with different Request Offerings related to other user roles (B) and (C). Result will lead to:
User in Role A and B -> Can see Service Offerings A containing Request Offerings B
User in Role A and C -> Can see Service Offerings A containing Request Offerings C
User in Role A, B and C -> Can see Service Offerings A containing Request Offerings B and C
User in Role A only -> Don's see anything because of the missing permission on any Request Offering. So the "empty" Service Request won't show up in the portal.
Hope his helps.
Andreas Baumgarten | H&D International Group

Photos are not being created for all users on MySites.

I am currently syncing AD thumbnail photos to sharepoint 2010 SP1 Dec CU . I have configured everything properly and after the full profile sync I can see the binary data for the thumbnail photo. I have run the following command on
the Sync_DB to see the binary data.
Select sAMAccountName,SPS_MV_OctetString_PictureURL from MMS_Metaverse with(nolock) Where SAMAccountName like '%UserName%'
I then go to run the Update-SPProfilePhotoStore -CreateThumbnailsForImportedPhotos 1 -MySiteHostLocation <mySiteHostURL>.
Initially, this took awhile and looking at the library of the photos, a large percentage of users photos were created but there are a lot of photos missing for users in the organization. This is actually affecting my photo so I can see that in
the library, I do not see the three specific photos for myself BUT the binary data for the picture is in the Sync_DB.
The problem is that running the Update-SPProfilePhotoStore only does a portion of the photos. I have re-ran the powershell command multiple times and still not getting additional photos created. The DB does not have any restrictions on growth
and there are no errors on the DB side.

I followed up with Brian and the fix was a multiple step process:
He enabled the User Profile Service (From Manage Services On Server) on all Application servers, then ran a full user profile sync, and then ran the Update-SPProfileStore PowerShel cmdlet again. This added a few more photos, but still not all.
I pointed him at this link:
http://matthewyarlett.blogspot.com/2012/09/profile-photos-not-synchronising-from.html which gives a PowerShell command to check what each user's PictureURL property is set at. He noticed that some URL's had the mysitehosturl:80 in them and some did not.
By using the script in the link sent he was able to remove the :80 from the URL's and then everything started working. Also, I believe he removed the %20 from some of the URL's as described in that link.
Regards,
Andrew J Billings
Portal Systems Engineer//MCSA,MCSE
Blog:
http://www.andrewjbillings.com
Twitter:   LinkedIn:

Old AP Invoices not showing up for a user

Hello,
Working on EBS:11.5.0 windows, the problem is that a specfic user can not see the old invoices while other users are able to see the old invoices. The problem has occurred yesterday, everything was working fine before that.
Any help on this regard will be highly appreciated.
Thank you,
Adith

1) Are both users who can / can not see the invoice using the same responsibility ?
2) Any recent changes / patches moved aorund the time from which this problem is visible ?

Windows Services service not showing up for domain users

When I log in with a domain account I do not see the Windows Remote Management (WS-Management)
service, when I login as the local administrator the service is there. Anyone know what might be causing this and how I can fix it?

Hi,
Have you tried to reconfigure it with the domain account?
Installation and Configuration for Windows Remote Management
http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to suppress a Security Notifcation for all users

How can we suppress the notification If you open this document, anonymous usage data will be sent securely to this remote server: To learn more about what this means for you, please click on the 'Privacy and Security' button. check box - Allow collection of detailed usage data check box - Do not show again _________________________________________________________________________________________ __________________________________ I'm looking for a way to tick the box 'Do not show again' for all users perhaps through a registry setting that can be set via GPO? Thanks, Brian

Well as a workaround you can create an email address/folder and provide this in SOCT and then from this mail folder , setup a rule to forward the mail to all receipients.

Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
Is there a way to configure this for all users with the customization wizard or another method?
We also need to do the same for "Do not show edit warnings"
If these are registry keys, which registry keys set these options?

Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
If that doesn't work and there's a configuration item in the preferences UI, do this:
Get regshot.
Close everything but Acrobat/Reader.
Take a reg shot.
Configure the setting via the UI.
Tak another reg shot.
Compare the two.
That process will give you your answer.
If there is no corresponding pref in the UI, then you probably can't do it.
Ben

SCSM - Service Request Area list - modifications not showing for all users

Hi All
As you cant edit the Service Request Area list, i've settled on changing the default display names to better reflect the categories we want for our SR's. The changes i've made are visible in SCSM on my computer (where i made the changes from), however if
i fire up another instance on a different computer - i can only see the defaults. Anyone seen that before? Typically when i make any sort of change to a list item it is visible for all users.
I'm aware that there is a custom MP out there to allow you to have your own SR Area List, however i was not able to get it to work in our environment (link: http://gallery.technet.microsoft.com/Custom-Service-Request-e4d40738/view/Discussions#content)
Any help would be appreciated.
Thanks

Have you made sure that the selected language in both consoles (the one you are editing from and the one you are testing in) are the same?
When editing lists you will only be asked to save changes (be that changing existing values or adding new ones) if they are stored in a sealed MP - which they should be according to best practice.
If you are not asked which MP to save to then you have already "commited yourself" to a specific MP. You could delete this MP (if there is nothing but the list values in it) or delete them one by one using the console. Then when back to square one the console
will once more ask you which MP to save changes to.
http://codebeaver.blogspot.dk/

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Adobe Reader 9.0 - Disable Forms Highlight color show border hover color for fields for all user a

Hello.
I am installing Adobe Reader 9.0 onto a new windows xp corporate build for my company. We would like to have the Forms Preference "Highlight Color" Show border Hover Color for Fields checkbox unchecked by default for any user that logs onto the workstation. (All new WinXP profiles, and if possible, any existing profiles) Is there a registry entry that can be changed to ensure that this option is unchecked by default on our WinXP build?
Thank you.

bumping thread...
I have downloaded the Adobe Reader 9.0 Custom Wizard install creator tool, but it still appears that I will need to know what registry key to change/import into the installer for this preference to be disabled by default for all users of the workstation that Adobe Reader 9.x is installed onto.
Any and all help is greatly appreciated.
Thank you.

How do I get the HDD to show on the desktop for all users?

I have found it by going to finder and preferences and show hard disks, but when another user logs in, it doesnt show. The Macs are networked and login using Active Directory, but as soon as I change the logon it doesnt show anymore.
I need this to show or a network share using SMB to be mapped for all users when they logon. I have software "Read and Write Gold 4 for Mac" and upon starting the software, it needs to look for a license file. I can either copy to all the Macs, or have one on a network share.
Any ideas welcome.

Looking around, it seems that some people have changed the Launchpad key and want to go back.
If there's a way to go back, then there must be a way to change it completely?
In this thread, Fabien says that if you enter
rm ~/Library/Preferences/com.apple.symbolichotkeys.plist
into Terminal, you can bring the Launchpad key back.

Eu_role not showing up for all users in EP7

Similar Messages

Maybe you are looking for