Eufi partition on MDT 2013

I am using LT for deploying Windows desktop with MDT 2013. What I would like to do is to be able to customize the partition layout for any eufi capable system. I know how to create a diskpart script to do the job. If I am going to create a custom Task sequence
for the eufi layout, how does MDT handle the situation if the system is not uefi capable\enabled?
Thanks

Hi,
You can create an answer file to customize disk configuration.
DiskConfiguration
http://technet.microsoft.com/en-us/library/ff715671.aspx
The unattended file is applied to both BIOS-Based and UEFI-based computers. If you don’t want the configuration applied, you have to remove the file.
In addition, answer file should be placed to the right place.
Methods for Running Windows Setup
http://technet.microsoft.com/en-us/library/cc749415(v=ws.10).aspx
Please notice “Implicit Answer File Search Order”.
Hope this helps.

Similar Messages

  • MDT 2013 Fails to Format or Partition disk on Surface Pro 3

    I have been trying to image a Surface Pro 3 using MDT 2013 and have been unable to get past the Format and Partition portion of the deployment.  At first I would get an error that it was unable to format or partition the drive and then after that it
    just reboots after trying for so long.  I am able to image any other device with the same task sequence and have no issue just having an issue with the Surface Pro 3.  Any help would be great.
    Thanks in advance.
    I am getting the error FAILURE (5210)
    ZTI Error - Unhandled error returned by ZTIDISKPART: Object required (424)

    I think our problem is also hardware failure although without re-imaging a working surface pro 3 I can't be sure.
    I tried what imfusio suggested in this thread.
    https://social.technet.microsoft.com/Forums/en-US/d31384bc-4e96-4a5b-a400-637bd6006d81/failure-5456-unable-to-determine-destination-disk-partition-and-or-drive-surface-pro-3?forum=mdt
    Unfortunately the deployment failed with the same ZTI Error - Unhandled error returned by ZTIDISKPART:
    Object required (424)
    I then rebooted into WinPE and ran diskpart, I could see the two volumes (EFI and OSDisk). I then tried to format the OS disk volume using diskpart. I got a paramater is incorrect error and the disk was no longer visible with a 'list disk' command. So it's
    like the format is putting the disk offline. I'm going to try restore one of these surfaces, apply all firmware updates then re-image. If that doesn't work I'm out of ideas.

  • Keep extra partition on deployment with MDT 2013

    hello all,
    I am using MDT 2013 to make the
    deployment of some workstations in the company,
    however they all have an extra
    partition (D: \),
    doing some testing I noticed that the
    MDT does clean the entire
    disk, not just on the C:\ drive.
    Is it possible to get the MDT format
    just drive the system keeping
    the extra drive (D:\)?
    Thank you.
    Eduardo Sena | Microsoft Certified Professional | Embaixador Windows 8 | MVP Windows-Expert IT Pro | [email protected] Blog - www.eduardosena.com.br

    if you are just replacing the OS, then I recommend the "Refresh" scenario. Refresh will take an existing Machine and refresh it to a new OS version, persisting the existing partition configuration.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • MDT 2013 + create 5 recommended UEFI/GPT drive partitions

    Hi
    My end goal is to deploy a custom x86 image to a UEFI device (tablet) using a USB stick. It is likely that my .wim file will be >4GB, but for now, I'm just trying to get the process working with a standard OEM <4GB .wim file.
    As per this post, I have performed steps under sections 5.1, 5.2 and 5.3 MANUALLY, by booting the tablet using a WINPE 5.0 USB and running
    1) diskpart /s E:\CreatePartitions.txt 
    and
    2) E:\ApplyImage E:\Images\ThinImage.wim
    Q: Above worked perfectly and it's exactly what I'm looking for.  How do I incorporate 1) + 2) into MDT, or do I simply attempt to replicate the code from 1) + 2) under "Format and Partition Disk" under PreInstall\New
    Computer only step?
    Any advice or pointers would be really appreciated.
    Many thanks in advance.

    Recovery images, that's a different story.
    First option is to increase the size of the System partition to the desired size:
    BdeDriveSize=5000
    Otherwise, the best solution I've seen is to build the standard MDT partition configuration using the default MDT "Format and Partition" step. and *THEN* shrink the partition to the desired size. Yes Shrink.
    The other option is to increase the size of partition 1 from
    See Mike's post on WimBoot for the example script LTIApplyWim.wsf script that shows how shrinking works.
    http://blogs.technet.com/b/mniehaus/archive/2014/04/13/experimenting-with-wimboot-using-mdt-2013.aspx
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • MDT 2013 won't capture 8.1 image, does not boot to PE to capture

    I am doing this with Server 2012 R2 and MDT 2013, and the reference machines are VMs
    I initially created a deployment share for creating windows 7 and windows 8.1 reference images and capturing and deployment worked ok. After getting into some more details i customized the deployment share customsettings  to make things easier and created
    a separate capture share for capturing new reference images. I updated permissions on the share so my service account has access to it. 
    In this share i imported the windows 8.1 os files and copied the sysprep and capture task sequence i used to capture my first reference image [from the original deployment share], but when running the task sequence it reboots and just goes back into windows,
    instead of windows PE to capture the image. 
    I copied a windows 7 capture sequence to the capture share, imported the windows 7 files and updated the task, and it rebooted into PE without a problem and copied an image. so I don't believe I have any permissions/customsettings problems with the new share.
    Im not seeing any errors jump out at me in the bdd.log but I'm new-ish to going over the logs and using MDT to start with so I may be missing the obvious. I am using SMS trace and dont see any red/yellow highlites either. 
    In windows 7 i did have the vm in audit mode when i mapped the share as an admin and started the task sequence. In windows 8.1 i am not in audit mode [after doing some research and learning more about using MDT it did not seem necessary]
    After comparing a run of the windows 7 task to windows 8 i see the boot.wim copied to the win 7 vm, but i dont see it on the win 8 vm. There is a partition created, i cant see data in it when i show hidden files. 
    rules for the capture share
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipAppsOnUpgrade=YES
    SkipCapture=NO
    SkipAdminPassword=YES
    SkipProductKey=YES
    Heres the last part of bdd.log. New here so I can't post a link yet, didnt know if i should post the whole thing here or not to start with. 
    <![LOG[LTI initiating task sequence-requested reboot.]LOG]!><time="08:29:38.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property PHASE is now = CUSTOM]LOG]!><time="08:29:38.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="08:29:43.000+000" date="03-19-2014" component="LTICopyScripts" context="" type="1" thread="" file="LTICopyScripts">
    <![LOG[--------- Script Start ---------]LOG]!><time="08:29:43.000+000" date="03-19-2014" component="LTICopyScripts" context="" type="1" thread="" file="LTICopyScripts">
    <![LOG[LTICopyScripts processing completed successfully.]LOG]!><time="08:29:43.000+000" date="03-19-2014" component="LTICopyScripts" context="" type="1" thread="" file="LTICopyScripts">
    <![LOG[Creating startup folder item to run LiteTouch.wsf once the shell is loaded.]LOG]!><time="08:29:43.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Shortcut "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp\LiteTouch.lnk" created.]LOG]!><time="08:29:43.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property BootPE is now = ]LOG]!><time="08:29:43.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="08:32:24.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\WIN81-REF\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\WIN81-REF\root\cimv2:Win32_LogicalDisk.DeviceID="E:"]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\WIN81-REF\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\WIN81-REF\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\WIN81-REF\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\WIN81-REF\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = E: C:]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[No task sequence is in progress.]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not running within WinPE.]LOG]!><time="08:32:25.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeploymentMethod = UNC]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Mapping server share: \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Mapped Network UNC Path Z: = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Existing UNC Path Z: = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Successfully established connection using supplied credentials.]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployRoot = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployDrive is now = Z:]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployDrive = Z:]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Phase = CUSTOM]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Mapping server share: \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Existing UNC Path Z: = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Existing UNC Path Z: = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Successfully established connection using supplied credentials.]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployDrive is now = Z:]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployDrive = Z:]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Mapping server share: \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:26.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Existing UNC Path Z: = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Existing UNC Path Z: = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Successfully established connection using supplied credentials.]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeploymentType = CUSTOM]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ResourceRoot = \\2012R2_TEST\CaptureShare$]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property ResourceDrive is now = Z:]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ResourceDrive = Z:]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[SMS Task Sequencer already found on C:\MININT\Tools\X64]LOG]!><time="08:32:27.000+000" date="03-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

    Thanks for your reply. 
    The pc is not in the domain when i run litetouch. It was joined after install, then i run some local gpos/scripts against it, install all of the shared printers from servers, then i put it back in a workgroup, login as the local administrator, delete the
    domain profiles and guids in the registry, briefly connected back to a domain server [not with a mapped drive] to copy a couple of files, rebooted into the local admin account an ran litetouch. 
    After running litetouch.wsf the first time in the windows 8.1 pro vm [no changes, but manual connection] it rebooted without sysprepping or taking an image
    I deleted the task sequence and created another one with "sysprep and capture" as the sequence.  i made no changes to the task sequence. did all of the above, ran litetouch, and it just reboots. sysprep does not run and windows pe does not load. 
    if i run sysprep and boot into audit mode [as a test, since my windows 7 vm snapshot was in audit mode when it runs litetouch.wsf], then run litetouch, sysprep works, then it DID capture an image, but after that image was capture and the VM rebooted, i got
    this error when loading windows 8
    "windows could not complete the installation. To install windows on this computer, restart the installation" and if i hit ok it will reboot and error out again. 
    Haven't had any issues with that VM until now. 
    I reverted to my snapshot and just ran sysprep oobe w/ generalize to see how it would react
    it failed, setuperr.log shows SYSPRP failed to remove apps for the current user. some searching gives me information on that and makes me think its related to adding/deleting user profiles? i dont actually use or update the apps at all, i have a deploy task
    that removed most of them and customizes the start screen and those seem to work without issue. 
    found this as my reference: http://support.microsoft.com/kb/2769827/en-nz
    Sysprep has an additional provider that is added in Windows 8 to clean appx packages and generalize the image. The provider will only work if the Appx package is a per-user package or an all-user provisioned package.
    and
    Resolution
    The correct way of removing the package is to remove the package for the user running sysprep and also remove the provisioning. This can be done using the following Powershell cmdlets:
    Import-Module Appx
    Import-Module Dism
    Get-AppxPackage -AllUser | Where PublisherId -eq 8wekyb3d8bbwe | Format-List -Property PackageFullName,PackageUserInformation
    if i run that i get a lot of 
    [unknown user]: installed
    Do I just need to revise my process and start from scratch? or at least just never actually join the domain and user other profiles? thats a convenience thing so its not a big deal, really.
    I have an image made in a similar way that works, but doesnt have quite all the updates/changes i wanted. It captured [at the time] fine and installs without issue
    Heres an overview of what I do [i am open to some revisions on this]
    -deploy windows 8 base install from MDT
    -join domain, login with service account [just makes getting to some things easier]
    -install office 2010 pro plus w/ sp2 [i do understand that these can be set as an MDT app but the install takes a while and i dont like waiting on it if i dont have to]
    -install windows updates [no WSUs server currently, on my future to-do list, not my decision right now and i do understand the benefits of having one]
    -connect to servers and install all network printers [we have so many that i dont want to wait on the drivers when we do a big roll out soon]
    -install oracle software [i can get it to automate in windows 7, not 8, so i dont want to manually deal with it post-install]
    -install adobe reader/java [i do understand that these can be set as an MDT app]
    -leave domain, reboot, login as local admin
    -clean domain profiles/registry guids
    -make some local gpoedits [we dont have 8.1 enterprise and just want the start screen locked down]
    -install our AV network agent
    -lite touch. 
    any advice is appreciated

  • MDT 2013: bootstrap.ini not applying username and password for share access

    I customized my bootstrap.ini file to skip the welcome screen, set keyboard locale, and enter a service account username and password for share access.  The welcome screen skip and keyboard locale work beautifully but it's not applying the share username/password/domain
    at all.  
    bootstrap.ini: 
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\mydeploymentserver\DeploymentShare$
    UserID=myuserid
    UserDomain=mydomain.com
    UserPassword=mypassword
    KeyboardLocale=en-US
    SkipBDDWelcome=YES
    I verified that the unattend.xml file on the MININT volume during deployment had all of this information populated correctly:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>2</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>\\mydeploymentserver\deploymentshare$\Operating Systems\Windows 7 x64 with District Software - 06222014\Windows 7 x64 with District Software - 06222014.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username>myusername</Username>
    <Domain>mydomain.com</Domain>
    <Password>mypassword</Password>
    </Credentials>
    <JoinDomain>mydomain.com</JoinDomain>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName>eos-vm-02</ComputerName>
    <RegisteredOrganization>Regional School District 19</RegisteredOrganization>
    <RegisteredOwner>Information Technology</RegisteredOwner>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    <TimeZone>Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>http://www.eosmith.org</Home_Page>
    <DisableWelcomePage>true</DisableWelcomePage>
    <DisableFirstRunWizard>false</DisableFirstRunWizard>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>administratorpassword</Value>
    <PlainText>true</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value>administratorpassword</Value>
    <PlainText>true</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>Regional School District 19</RegisteredOrganization>
    <RegisteredOwner>Information Technology</RegisteredOwner>
    <TimeZone>Eastern Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>
    ... and the bdd.log file appeared not to read the username and password at all:
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property LogPath is now = D:\MININT\SMSOSD\OSDLOGS]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property Debug is now = FALSE]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Cleaned up a dirty deployment.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[No task sequence is in progress.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS TargetDisk: \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[GetPartitions: 2]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Target Partition not big enough: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found Drive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Found FirstPossibleSystemDrive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property SMSTSLocalDataDrive is now = D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Unable to connect to BCDStore.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not running within WinPE or WinRE.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeploymentMethod is now = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeploymentMethod = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Using a local or mapped drive, no connection is required.]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployRoot = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[DeployDrive = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property PHASE is now = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property DeploymentType is now = NEWCOMPUTER]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Phase = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property inifile is now = Bootstrap.ini]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------------------------- Object Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------------------------- Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSCurrentVersion is now = 6.3.9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSCurrentBuild is now = 9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OSVersion is now = WinPE]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServerOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServerCoreOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property HALName is now = acpiapic]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Checking network adapter: [00000001] Intel(R) PRO/1000 MT Network Connection]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[MAC address = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[IP Address = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[IP Address = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Default Gateway = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IPAddress001 is now = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IPAddress002 is now = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property MacAddress001 is now = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DefaultGateway001 is now = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Unable to determine ConfigMgr distribution point]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Not Wizard = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WDSServer is now = mydeploymentserver.mydomain.com]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property HostName is now = MININT-U1TGFAD]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting asset info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile: The file x86\Microsoft.BDD.Utility.dll could not be found in any standard locations.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 1]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[RUN: regsvr32.exe /s ""]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 0]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[RUN: regsvr32.exe /s "X:\Deploy\Tools\x64\Microsoft.BDD.Utility.dll"]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property AssetTag is now = No Asset Tag]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SerialNumber is now = VMware-42 05 2b f7 cd 5b 63 fd-83 8a 77 84 7c ed 79 05]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Make is now = VMware, Inc.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Model is now = VMware Virtual Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Product is now = 440BX Desktop Reference Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property UUID is now = F72B0542-5BCD-FD63-838A-77847CED7905]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Memory is now = 2047]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Architecture is now = X64]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property ProcessorSpeed is now = 2800]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property CapableArchitecture is now = AMD64 X64 X86]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsLaptop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsDesktop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsServer is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsUEFI is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsOnBattery is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsX86 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsX64 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsSLAT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting asset info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting OS SKU info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Unable to determine Windows SKU while in Windows PE.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsHypervisorRunning is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsVT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsNX is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property Supports64Bit is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property SupportsHyperVRole is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsVM is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property VMPlatform is now = VMware]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Connection succeeded to MicrosoftVolumeEncryption]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[There are no encrypted drives]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property IsBDE is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Processing the PREINSTALL phase.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Finished determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Using from [Settings]: Rule Priority = DEFAULT]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------ Processing the [DEFAULT] section ------]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Property DEPLOYROOT is now = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[Using from [DEFAULT]: DEPLOYROOT = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
    <![LOG[------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------]LOG]!>

    Basics - Server 2008 R2 - SP1, WDS,  MDT 2013
    Well all, I've done this at least 20 times today and the deployment share info is still wrong...
    Someone else built and messed with this thing so i'm trying to fix it.  We have 2 MDT servers and 1 WDS that is on the Production MDT.  I've turned the test MDT off.
    It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
    Very Simple bootstrap.ini
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\MMPDEPLOY02\DeploymentShare$
    UserID=xxx
    UserDomain=xxx
    UserPassword=xxx
    KeyboardLocale=en-US
    SkipBDDWelcome=YES
    It continues to show up on the client as ||mdt901w8|deploymentshare$  (test server) (pipes for \ since it makes it a link and i'm new)
    I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
    I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
    Any ideas..

  • MDT 2013 Windows 8.1 Task sequence Stops After first Reboot. login

    Hi There,
    The issue I am having is that After the OS gets laid down, and the Windows 8.1 computer reboots, The task sequence does not continue. It fails everytime. There are not any obvious errors that happen in the process that I can see in the logs. But I have
    customized this process quite a bit and I could use some help. We are deploying potentionally to over 30,000 computers.
    The test machine I have been using is the Surface pro 2.
    The interesting part is after a failure is if I start the process over again ,  boots into PE, then run diskpart manually from command prompt to Clean Disk 0, and then reboot and start the MDT task sequence, it will deploy fine.
    I also have a custom step that copies the TS media from the stick to a Recovery partition I create. The user can launch a -re-image or MDT refresh from an Icon/script, which will unhide this "recovery partition", and kick off a lite touch refresh.
    This works succesfully everytime. We have remote locations with very slow links, so MDT over the network or MDT integrated with SCCM is not an option at this time. So this is the solution.
    I am attempting to use MDT 2013 to deploy Windows 8.1 Offline, and using GPT partitions.
    I am using a custom Format and partiition Step, that call the CustomDiskpart.txt script from %deployroot%\Scripts.
    I am also using a Split image, as multi partitioned EFI/NTFS USB sticks are not a possibility for us , also, the USB sticks capable of this are seen by MDT as a "fixed drive" anyways. Which can cause issues in itself. So the LTIAPPLY.wsf has
    been edited to search and apply ther split .swm files.  This works well.
    After the Task sequence failure I have tried launching the Litetouch scripts from the C:\MINNINT folder manually to continue the sequence, but it doesnt  do anything.
    I don't want to always be running Diskpart manually before imaging a new OEM computer. I needa second pair of eyes on this.
    Thank You in advance!

    Hi,
    Thanks Again for taking a look.
    I checked the sysprep log in the image and they look fine. No errors.
    As requested here are some logs. Let me know if I can provide anything else.
    BDD.log
    litetouch.log
    SMSTS.log
    Im not actually attempting to provide a recovery image. What I am doing is leveraging MDT to refresh the computer remotely. We can update the MDT media on the hidden data partition,when required and kick it off remotely. Some of the computers are very
    remote, and without SCCM DP's, plus a combination of slow links and a lack of deskside techs made this a requirement. This works without incident.
    The only issue I have is on a new computer if I run the sequence (offline USB media) it will fail the first time, unless I run a diskpart clean in PE first.. Then it will succeed. Refreshing the computer is fine.

  • Using MDT 2013 on Windows 8.1 system

    I downloaded the MDT 2013 and installed it. During Install I changed the installation drive to a secondary drive.  When attempting to run the Deployment Workbench I would get an error telling me that I needed to have Powershell installed. Removed Powershell
    and reinstalled it. Reinstalled MDT with no luck.
    Finally I installed MDT 2013 with the default settings and then it worked.  Little frustrating that you have the option to install to a different drive but then it wont work.  Didn't really want to put it on my SSD.
    Perhaps this can be fixed with future release.
    Wirrel

    I have been able to install MDT on a 2nd partition, no problems.
    Perhaps you are observing a different problem (powershell?!?!).
    Keith Garner - keithga.wordpress.com

  • Server 2012 R2 + MDT 2013 + WINLOAD.EXE error

    Hi All,
    After watching some videos on MDT 2013 integration with SCCM 2012 I have been testing some builds of Windows Server 2012 R2. The MDT 2013 integration is working well with Database look-ups providing the required rules for customsettings.ini. To coincide
    with the tests I am using the MDT 2013 Server Task Sequence Template.
    Unfortunately I am hitting an error whereby, when using the MDT Task Sequence the full Operating System fails to start with a:
    \Windows\System32\Winload.exe, 0xC000000F, File is Missing or Corrupt
    Note: This is happening when the full OS is starting up. This is not a WinPE startup issue.
    When I use a non-MDT Task Sequence, i.e. a typical task sequence we use for OSD the build process works OK. We still have MDT database integration working in that Task Sequence however.
    Some background info:
    As per our normal process we are using a Windows Server 2012 R2 Capture image. The reference machine was build and capture using a partition scheme of (Partition 1 - 500MB + No Drive Letter + Hidden, Partition 2 - 100% of disk - Drive C:\)
    This is a new SCCM 2012 R2 implementation and as such we installed CU3 as part of our build process. CU4 is yet to be applied.
    Our WinPE Boot Images are WinPE 5 with a build number of 6.3.9600.16384
    As we have an existing SCCM 2007 environment I am currently using USB Boot media to kick off the Task Sequence
    We are only considering a "New Computer" build scenario. The MDT 2013 Task Sequence already detects that because the "_SMSTSinWinPE" = True.
    In both Task sequences the Format and Partition step is as follows:
    Disk 0
    Standard(MBR)
    BDEDrive (Primary) - 499MB, Marked Active with variable BDEDrive assigned
    OSDisk (Primary) - 90GB variable OSDisk assigned
    In both Task sequences the Apply Operating System step is as follows:
    Using Captured Image
    Apply operating system from a captured image (Image 2-2)
    Apply image to Logical Drive (OSDisk)
    In both Task sequences the Apply Data Image step is as follows:
    Using Captured Image
    Image 1-1 (from the same captured image as shown above)
    Apply image to Logical Drive (BDEDrive)
    What has been done so far:
    Already eliminated driver packs as the problem occurs with and without them
    Have monitored the build process (during WinPE that is) to determine what disks and partitions are in play at that stage. The 500MB BDE and 90GB OS Partitions are created as expected. The Apply OS and Apply Data Image steps are applying to the correct partitions.
    I have used the Windows Server 2012 R2 Installation CD and tried to run a bootrec /fixmbr + bootrec /fixboot
    I have used the Windows Server 2012 R2 Installation CD and tried to run a bootrec /rebuildbcd
    I have tried toggling the "OSDPreserveDriveLetter" variable from True to False and back again. Based on my interpretation of the SCCM 2012 R2 + Windows Server 2012 drive letter issue this should be set to True so the capture image drive letters
    are preserved.
    I have disabled an UEFI Partitioning steps just as a precaution.
    There is no Bitlocker steps involved yet.
    I have trawled through the SMSTS.LOG. So far it looks OK to me:
    !--------------------------------------------------------------------------------------------! TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Expand a string: WinPEandFullOS TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Executing command line: tsenv.exe "OSDPreserveDriveLetter=True" TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Finished with error code 0 TSEnv 18/02/15 8:09:49 AM 728 (0x02D8)
    Process completed with exit code 0 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    !--------------------------------------------------------------------------------------------! TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Successfully completed the action (Set Variable for Drive Letter) with the exit win32 code 0 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    MP server https://SOMETHING24.SOMETHING. Ports 80,443. CRL=false. TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Setting authenticator TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set authenticator in transport TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Sending StatusMessage TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Setting message signatures. TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Setting the authenticator. TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    CLibSMSMessageWinHttpTransport::Send: URL: SOMETHING24.SOMETHING:443 CCM_POST /ccm_system_AltAuth/request TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    In SSL, but with no client cert TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Request was successful. TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Expand a string: %_SMSTSMDataPath%\Logs TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Clear local default environment TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Updated security on object D:\_SMSTaskSequence. TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSNextInstructionPointer=43 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=43 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSInstructionStackString=0 33 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 33 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Save the current environment block TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Successfully save execution state and environment to local hard disk TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Start executing an instruction. Instruction name: Apply Operating System Image. Instruction pointer: 43 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSCurrentActionName=Apply Operating System Image TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSNextInstructionPointer=43 TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a local default variable OSDImageIndex TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set a global environment variable _SMSTSLogPath=X:\windows\TEMP\SMSTSLog TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Expand a string: OSDApplyOS.exe /image:S0200034,%OSDImageIndex% /target:%OSDisk% /runfromnet:False TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Expand a string: TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Command line for extension .exe is "%1" %* TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Set command line: OSDApplyOS.exe /image:S0200034,%OSDImageIndex% /target:%OSDisk% /runfromnet:False TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Start executing the command line: OSDApplyOS.exe /image:S0200034,%OSDImageIndex% /target:%OSDisk% /runfromnet:False TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    !--------------------------------------------------------------------------------------------! TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Expand a string: WinPE TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Executing command line: OSDApplyOS.exe /image:S0200034,%OSDImageIndex% /target:%OSDisk% /runfromnet:False TSManager 18/02/15 8:09:49 AM 1048 (0x0418)
    Command line for extension .exe is "%1" %* ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Set command line: "OSDApplyOS.exe" /image:S0200034,2 /target:D: /runfromnet:False ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Found run from net option: 0 ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Not a data image ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    ApplyOSRetry: ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    TSLaunchMode: UFD ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    OSDUseAlreadyDeployedImage: FALSE ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    'C:\' not a removable drive ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    The volume D:\ exists and is a local hard drive. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    The volume D:\ is using a valid file system. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Windows target partition is 0-2, driver letter is D:\ ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Verifying boot volume is NTFS. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    The machine does not have a local client cache. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    ResolveSource flags: 0x00000001 ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    SMSTSPersistContent: . The content for package S0200034 will be persisted ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    DownloadOnDemand flag is true. Attempting to download content locally for Package S0200034. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Locations: Multicast = 0, HTTP = 2, SMB = 0. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Package Flags: 0x01000000 ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Multicast is not enabled for the package. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Trying https://SOMETHING24.SOMETHING/NOCERT_SMS_DP_SMSPKG$/S0200034. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    GetDirectoryListing() entered ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Initializing HTTP transport. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Setting Authenticator. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Set authenticator in transport ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Setting Media Certificate. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    WinHttp credentials set ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    CLibSMSMessageWinHttpTransport::Send: URL: SOMETHING24.SOMETHING:443 PROPFIND /NOCERT_SMS_DP_SMSPKG$/S0200034 ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    In SSL, but with no client cert ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    401 - Unsuccessful with anonymous access. Retrying with context credentials. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Using thread token for request ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    401 - Unsuccessful with context credentials. Retrying with supplied credentials. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Request was successful. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    DAV response string is:
    <?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://SOMETHING24.SOMETHING/NOCERT_SMS_DP_SMSPKG$/sccm?/S0200034/</D:href><D:propstat><D:status>HTTP/1.1 200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://SOMETHING24.SOMETHING/NOCERT_SMS_DP_SMSPKG$/sccm?/S0200034/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://SOMETHING24.SOMETHING/NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim</D:href><D:propstat><D:status>HTTP/1.1 200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://SOMETHING24.SOMETHING/NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim</D:displayname><D:getlastmodified>Tue, 10 Feb 2015 04:56:27 GMT</D:getlastmodified><D:getcontentlength>6814100762</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus> ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    List of files to be downloaded ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    File: http://SOMETHING24.SOMETHING:443/NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    GetDirectoryListing() successfully completed ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    401 - Unsuccessful with anonymous access. Retrying with context credentials. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    401 - Unsuccessful with context credentials. Retrying with supplied credentials. ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Downloading file /NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim range 0-2147483646 ApplyOperatingSystem 18/02/15 8:09:49 AM 724 (0x02D4)
    Downloading file /NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim range 2147483647-4294967293 ApplyOperatingSystem 18/02/15 8:10:40 AM 724 (0x02D4)
    Downloading file /NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim range 4294967294-6442450940 ApplyOperatingSystem 18/02/15 8:11:23 AM 724 (0x02D4)
    Downloading file /NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim range 6442450941-6814100761 ApplyOperatingSystem 18/02/15 8:12:14 AM 724 (0x02D4)
    Downloaded file from http://SOMETHING24.SOMETHING:443/NOCERT_SMS_DP_SMSPKG$/S0200034/sccm?/dos-20150210.wim to D:\_SMSTaskSequence\Packages\S0200034\dos-20150210.wim ApplyOperatingSystem 18/02/15 8:12:21 AM 724 (0x02D4)
    VerifyContentHash: Hash algorithm is 32780 ApplyOperatingSystem 18/02/15 8:12:21 AM 724 (0x02D4)
    Content successfully downloaded at D:\_SMSTaskSequence\Packages\S0200034. ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Opening image file D:\_SMSTaskSequence\Packages\S0200034\dos-20150210.wim ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Image file S0200034 version "2015-02-10" will be applied ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Starting to apply image 2 from dos-20150210.wim to D:\ ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Wiping D:\ ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Set "D:\_SMSTaskSequence" to not be wiped ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Set "%OSDStateStorePath%" to not be wiped ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Set "%_SMSTSClientCache%" to not be wiped ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Set "%_SMSTSNewClientCachePathToCleanup%" to not be wiped ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Skipping D:\System Volume Information for wipe ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Skipping D:\_SMSTaskSequence for wipe ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Calculating expected free space. ApplyOperatingSystem 18/02/15 8:14:12 AM 1764 (0x06E4)
    Reporting deletion progress. ApplyOperatingSystem 18/02/15 8:14:12 AM 1764 (0x06E4)
    Successfully wiped D:\ ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Applying image to D:\ ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Applying image 2 to volume D: ApplyOperatingSystem 18/02/15 8:14:12 AM 724 (0x02D4)
    Executing command line: X:\windows\system32\cmd.exe /k TSBootShell 18/02/15 8:14:22 AM 780 (0x030C)
    The command completed successfully. TSBootShell 18/02/15 8:14:22 AM 780 (0x030C)
    Successfully launched command shell. TSBootShell 18/02/15 8:14:22 AM 780 (0x030C)
    Successfully applied image to D:\ ApplyOperatingSystem 18/02/15 8:21:07 AM 724 (0x02D4)
    OfflineRegistry::Init("D:\Windows") ApplyOperatingSystem 18/02/15 8:21:07 AM 724 (0x02D4)
    Loading offline registry hive "D:\Windows\system32\config\software" into HKLM\OfflineRegistry1 ApplyOperatingSystem 18/02/15 8:21:07 AM 724 (0x02D4)
    Loading offline registry hive "D:\Windows\system32\config\system" into HKLM\OfflineRegistry2 ApplyOperatingSystem 18/02/15 8:21:08 AM 724 (0x02D4)
    CurrentControlSet is mapped to ControlSet001 ApplyOperatingSystem 18/02/15 8:21:08 AM 724 (0x02D4)
    System root for target OS is D:\Windows, System drive is D: ApplyOperatingSystem 18/02/15 8:21:08 AM 724 (0x02D4)
    OS Version is 6.3 ApplyOperatingSystem 18/02/15 8:21:09 AM 724 (0x02D4)
    Successfully loaded a source BCD boot system ApplyOperatingSystem 18/02/15 8:21:09 AM 724 (0x02D4)
    SetupNewOS: Loaded source boot system from target volume "D:\" ApplyOperatingSystem 18/02/15 8:21:09 AM 724 (0x02D4)
    BootLoader::restore: D:\, C:\ ApplyOperatingSystem 18/02/15 8:21:09 AM 724 (0x02D4)
    Saving bcd store to D:\_SMSTaskSequence\ApplyBootSystem\boot\BCD ApplyOperatingSystem 18/02/15 8:21:10 AM 724 (0x02D4)
    Command line for extension .exe is "%1" %* ApplyOperatingSystem 18/02/15 8:21:10 AM 724 (0x02D4)
    Set command line: "bcdboot.exe" D:\Windows /s C:\ /l en-US ApplyOperatingSystem 18/02/15 8:21:10 AM 724 (0x02D4)
    Executing command line: "bcdboot.exe" D:\Windows /s C:\ /l en-US ApplyOperatingSystem 18/02/15 8:21:10 AM 724 (0x02D4)
    Process completed with exit code 0 ApplyOperatingSystem 18/02/15 8:21:11 AM 724 (0x02D4)
    Unloading offline SOFTWARE registry hive ApplyOperatingSystem 18/02/15 8:21:11 AM 724 (0x02D4)
    Unloading offline SYSTEM registry hive ApplyOperatingSystem 18/02/15 8:21:12 AM 724 (0x02D4)
    Updating MountedDevices key in target system registry ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    OfflineRegistry::Init("D:\Windows") ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Loading offline registry hive "D:\Windows\system32\config\software" into HKLM\OfflineRegistry1 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Loading offline registry hive "D:\Windows\system32\config\system" into HKLM\OfflineRegistry2 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    CurrentControlSet is mapped to ControlSet001 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    OS volume after boot is: '\DosDevices\C:' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Reading '\DosDevices\D:' value under MountedDevices in WinPE registry ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 0 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 0 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb272081-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 1 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 1 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb272089-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 2 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 2 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb27208a-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 3 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 3 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb27208b-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 4 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 4 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb27208c-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 5 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 5 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\DosDevices\X:' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 6 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 6 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb272095-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 7 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 7 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb272098-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 8 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 8 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\DosDevices\G:' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 9 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 9 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\DosDevices\H:' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 10 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 10 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\DosDevices\I:' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 11 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 11 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb27209b-b6e8-11e4-9b22-806e6f6e6963}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 12 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 12 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\DosDevices\J:' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 13 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 13 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '#{cb2720cf-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 14 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 14 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '#{cb2720d2-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 15 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 15 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '#{cb2720d5-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 16 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 16 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '#{cb2720e2-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 17 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 17 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb2720f3-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 18 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 18 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '#{cb272126-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerating index: 19 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Enumerated index: 19 ApplyOperatingSystem 18/02/15 8:21:13 AM 724 (0x02D4)
    Found value: '\??\Volume{cb272139-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Enumerating index: 20 ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Enumerated index: 20 ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Found value: '\DosDevices\C:' ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Enumerating index: 21 ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Enumerated index: 21 ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Found value: '\??\Volume{cb27213d-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Data for value '\DosDevices\D:' matches data for value '\??\Volume{cb27213d-b6e8-11e4-9b22-a4badb3da627}' ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Done enumerating. Closing mounted devices key. ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Closed mounted devices key. ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Deleting MountedDevices key on target system ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Creating new MountedDevices key on target system ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Writing new values to MountedDevices on target system ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Successfully updated MountedDevices on target system ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Unloading offline SOFTWARE registry hive ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Unloading offline SYSTEM registry hive ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Finished updating MountedDevices in target system registry (0x00000000) ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing up known name surrogate reparse points... ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\Documents and Settings] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\users\Administrator\AppData\Local\Application Data] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\users\Administrator\AppData\Local\History] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\users\Administrator\AppData\Local\Microsoft\Windows\Temporary Internet Files] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\users\Administrator\AppData\Local\Temporary Internet Files] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\users\Administrator\Application Data] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\users\Administrator\Cookies] ApplyOperatingSystem 18/02/15 8:21:14 AM 724 (0x02D4)
    Fixing junction point path [D:\use
    The fact that our normal Task Sequence works OK eliminates the Capture image and the WinPE boot images. It must be something I have not configured or configured incorrectly in the MDT task sequence.
    Any suggestions would be great.
    NSutton

    Hi,
    If I were you, I would Streamline the MDT Task Sequence to find the root cause.
    Moreover, please refer to the link below:
    How to fix Windows System32 Winload.exe Missing Or Corrupt 0xc000000f Error?
    http://winwiki.org/windows-system32-winload-exe-missing-or-corrupt-0xc000000f/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error when deploying LiteTouch image using MDT 2013 Media Flashdrive

    Please help! I have created a media flash drive (drive capacity: 64Gb) to deploy LiteTouch x86 and x64 images (Win7 and Win8, 8.1) to PCs but getting error for the 3rd time. I am using the following tools in my environment: i am using MDT 2013 on a Windows
    2k8 WDS server. PXE boot works fine deploying images but i keep getting this error after creating the Media flash drive). I first got the same failure with 14 errors but recreated the media on the WorkBench using a different selection profile but now i am
    getting this error: (by the way where is the BDD.LOG?)
    "Deployment Summary
    During the deployment process, 8 errors and 0 warnings were reported.
    Details...
    Failure ( 5456): Unable to determine destination disk, partition, and/or drive. See BDD.LOG for more information.
    Litetouch deployment failed, return code = -2147467259 0x80004005
    Failed to run the action: inject drivers.
    Unknown error (error: 00001550; source: unknown)
    The execution of the group (preinstall) has failed and the execution has been aborted. An acton failed. 
    Operation aborted (error: 80004004; xource: windows)
    Task sequence engine failed! code:enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. code 0x80004005

    I am planning to build a WDS with Win2k12 and MDT2013 and perhaps will be lucky to create a successful media. I created one with my WDS Win2k8 it works on a HP laptop but failed on other machines like Dell...
    Did you get driver injection in configuration WDS and MDT?
    Considering if the incompatible drivers cause your issue.
    If you can post back the MDT log during the deployment on DELL computers, it would be helpful for us to determine your issue.
    Kate Li
    TechNet Community Support

  • SCCM 2012 R2 and MDT 2013 Task Sequence Bugs

    Any links that list issues with the default MDT 2013 deploy task sequence: UEFI, local administrator password, Machine OU settings, OS installation partition and computer replace scenario.

    Hi,
    If you want to file bugs or feature requests, you'll need to go to the MDT and ConfigMgr connect site:
    https://connect.microsoft.com/ConfigurationManagervnext/Feedback
    Cheers!
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Has anyone added a custom wizard pane in MDT 2013?

    I'm trying to add a couple of panes I created for 2012 and they don't seem to be showing up.  At first I tried using the MDT Wizard Editor, but it apparently doesn't support 2013 yet.  I also tried to hand edit the whole thing and that doesn't
    seem to be working either.
    Has anyone done this successfully?  If so, could you provide some hints or walkthroughs on what might have changed in MDT 2013?

    Yes, I *think* I've done all of that.  I'm really just exporting work that I did to my MDT 2012 environment.  It just never sees or displays my added XML files.  If everything is the same between 2012 and 2013, then I'll go back to tearing
    my hair out.  I was hoping there was something different.  Here's an example of what I have:
    DeployWiz_Definition_ENU.xml
    <Pane id="Partition_Size" reference="DeployWiz_Partition_Size.xml">
    <Condition><![CDATA[UCASE(Property("SkipTaskSequence"))<>"YES" ]]></Condition>
    </Pane>
    DeployWiz_Partition_Size.xml
    <Wizard>
      <Global>
      </Global>
      <Pane id="Partition_Size" title="Partition Size">
       <Condition><![CDATA[UCASE(Property("SkipTaskSequence"))<>"YES" ]]></Condition>
        <Body><![CDATA[<H1>Custom Options</H1>
    <p>Choose partition size for the OS disk:</p>
    <table>
    <tr valign=top>
    <td width=100>
    <img src="DeployWiz_PS.png">
    </td>
    <td width="100%">
    <p><span class="Larger">Partition size (in GB)</span>
    <input type=text id=OSDPARTITIONS0SIZE name=OSDPARTITIONS0SIZE size=2 ></p>
    <p>*Note: To use 100% of the drive, choose a size larger than the disk (ie, 999GB)</p>
    </td>
    </tr>
    </table>]]></Body>
      </Pane>
    </Wizard>

  • MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

    Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
    the said action, the first was using the Unattend.xml, adding the  DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue? 
    Thank you, 
    Dane Zittritsch
    Thinix Support Manager

    I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
    Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files.  Now here is the weird part, if i re-run the task sequence
    the D WIM is applied, but that's counter productive. i will apply my TS.xml information. 
    Ts.xml
    <?xml version="1.0"?>
       -<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
          <variable name="DestinationDisk" property="DestinationDisk">0</variable>
          <variable name="DestinationPartition" property="DestinationPartition">2</variable>
         <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
         <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
         <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
         <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
    </globalVarList>
    -<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
    - <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
    property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
    name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
    name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
    startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
    <variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
    disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
    property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
    property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
    <variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
    <variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
    </step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
    for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
    name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
    description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
    runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
    <action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
    name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
    <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
    <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
    computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
    property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
    name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
    "\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
    Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
    DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
    <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
    name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
    name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
    3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
    <action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
    <variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
    successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
    </action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
    /CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
    disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
    <variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
    (Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
    <action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
    <variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
    <variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
    </defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
    </expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
    -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
    </condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
    -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
    disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
    </expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
    successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
    Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
    </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
    successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
    name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
    type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

  • MDT 2013 / ADK 8.1 Language Bug?

    Have a new MDT 2013 Deployment with Windows ADK 8.1 Update. Using the following keyboard settings in customsettings.ini and bootstrap.ini for years:
    KeyboardLocale=0807:00000807
    KeyboardLocalePE=0807:00000807
    The Keyboard PE settings do NOT work when the credentials for the connection to the deployment share have to be provided. Have the US keyboard layout. But when I hit F8, I have the correct Swiss German Keyboard Layout in the command window.
    Any advice? Thank you in advance for any help
    Franz

    Hi,
    Generally,  you would use GPT for UEFI systems, MBR for BIOS-based systems, on UEFI-based systems, it will create four partitions (boot, MSR, recovery, OS) on a GPT disk.
    It should just work, as soon as you figure out how to enable UEFI “native” mode in the firmware (BIOS) settings and then boot in “native” mode.
    Alex Zhao
    TechNet Community Support

  • MDT 2013 - Litetouch deployment failed, Return Code = -2147467259 0x80004005

    I'm attempting to deploy an image that I have recently captured with MDT.  I was able to capture the image without any problems and after capturing, it booted up properly.  But now when I go to deploy the image using a Standard Task Sequence it
    errors out.  It does boot into WinPE and gets to the installing operating system portion then spits out the following 8 errors:
    (5624):2: Run ImageX: /apply "\\PDC31089\DeploymentShare$\Operating Systems\Win7_BUP_1-31-14\Win7_BUP_1-31-14.wim" 1 C:
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Install Operating System.
    Unknown error (Error: 000015F8; Source: Unknown)
    The execution of the group (Install) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Install Operating System. Execution of task sequence failed.
    Unknown error (Error: 000015F8; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005After I receive the error messages if I attempt to restart the computer and allow it to boot up it just comes up with:"An operating system wasn't found. Try disconnecting any drives that don't contain an operating system"
    I have tried the following to resolve this issue:
    Create a new deployment share with only network drivers added and the one .WIM that was captured with MDT as well as one Task sequence.
    Update to MDT 2013
    Update Deployment share and completely regenerate Boot images
    Tried starting deployment from within Windows by mapping the drive and executing litetouch.vbs
    Also tried starting deployment using USB boot disk
    I'm running out of ideas and seem to keep getting the same 8 error messages.  It's very aggravating and am hoping that someone can point me in the right direction.
    I've included some log files on Skydrive at:  https://skydrive.live.com/redir?resid=6375A8F9E8089918%21105

    I came across this post recently. I am having the same string of errors suddenly when I try to deploy any image from my MDT 2013 server now. Previous images now fail to install soon after the Inject Drivers task sequence at the Install Operating System sequence.
    Each time I try to deploy an image(have tried several each with different task sequences), I get the same 7 errors.
    The errors produced are:
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Install Operating System.
    Incorrect Function (Error: 00000001; Source: Windows)
    The execution of the group (Install) has failed and the execution has been
    aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Install Operating System. Execution of task
    sequence failed.
    Incorrect Function
    (Error: 00000001;
    Source: Windows)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
    My HD size is 146GB with about 71GB being free.
    The BDD.log file is too large to post here apparently. Here are the
    last bits of it.
    <![LOG[Assume this disk is the destination Disk, and verify.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
    context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[TargetPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
    component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Search for Drive: TargetPartitionIdentifier  SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
    component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Found Drive: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Property OSDisk is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Target Drive Letter Found: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Found OS Drive: C   0]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[New ZTIDiskPartition : \\MININT-I3DUVLI\root\cimv2:Win32_LogicalDisk.DeviceID="C:"    \\MININT-I3DUVLI\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="11:36:58.000+000"
    date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Check Disk [0] <> [0] OK to skip.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[####### NOTE:  If this is one of the  last lines in your BDD.log file, check C: for the most up to date bdd.log!!!]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
    context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Event 41001 sent: ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread=""
    file="ZTIDiskpart">

Maybe you are looking for