EUL tables, Business Area and Work books!

Hi,
I would like to know , how are the business area connected to Workbooks! through which EUL Tables!
Business area is stored in EUL4_BAS table
Workbooks are stored in EUL4_DOCUMENTS table
BUT HOW ARE THESE TABLES CONNECTED?
I want to create a report, which should contain all the business areas and the workbooks related to each business area!

Duplicate post. See the Re: Last run of the Report?
Cheers, APC

Similar Messages

  • EUL Tables, Business Area and Workbook

    Hi,
    I would like to know , how are the business area connected to Workbooks! through which EUL Tables!
    Business area is stored in EUL4_BAS table
    Workbooks are stored in EUL4_DOCUMENTS table
    BUT HOW ARE THESE TABLES CONNECTED?
    I want to create a report, which should contain all the business areas and the workbooks related to each business area!

    Hi
    already replied ,see ealry post
    NP

  • Business Areas, Folders and Work Books

    Hi,
    We have approximately 20 business areas and around 200 workbooks. We are trying to reduce business areas. We are creating 4 new business areas ,under which I want to import all 20 business areas into 4 new business areas. So I am coying all folders under 20 business areas into 4 new business areas.
    I am unable to do the same with workbooks. Now ,when we are trying to open the workbooks, we are having issue in opeing the workbook as workbooks are referring old business area folders. I want to opne the work books refering folders with in the new busiess areas.
    Is there any way to do this other than creating workbook again?
    Thanks.

    Hi,
    D4O do not uses any business are as it is used for OLAP reporting. You cannot have an option/prompt to user to select a particular analytic workspace.
    If you grant access on AW$<AW Name> object to the user then the user can see everything inside that workspace. If you want the user to see both the workspace then you should grant the select privilege to both AWs.
    Suppose the two workspaces are in two diferent schemas i.e. schema1 and schema2 having AW1 and AW2 as the workspace respectively. If you want to grant access to both the above workspaces to user say user1, then you should grant privilege like this
    grant select on schema1.aw$AW1 to user1;
    grant select on schema2.aw$AW2 to user1;
    The above grants ensure that the user1 can see all the cubes in both the workspace. Ensure that the user1 should have D4OPUB and OLAP_USER role granted.
    Thanks
    Brijesh

  • Table name having relationship between Business area and Profit Center

    Hi guys,
    Can you tell me the table name showing the relationship between Business area and Profit Center in fb60  transaction.
    thnx
    hema

    HI.
    BSEE u2013GSBER  Business area.
    BSID-PRCTR Profit center
    Regards.
    jay

  • Moving Planning areas and Planning books from SCM 4.0 to SCM 5.1

    Hello Experts,
    Can anyone have idea of how to transport planning areas and Planning book from SCM 4.0 to SCM 5.1.
    Do we need any prerequisite to Transport Planning area and Planning book from Lower version (SCM 4.0) to higher version SCM 5.1.
    Any suggestion could be very helpful for me.
    Thanks!
    Best Regards,

    I have never done this, but I suspect it might be tad easier to just recreate them in 5.1 There are scores of tables that Planning Book configuration lies in. I would not rely on a transport mechanism working across versions to migrate every bit of the configuration accurately.

  • How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

    Hi All,
    We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
    I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
    I am using disco version 10.1.2.48.18.
    Thanks.

    Hi,
    You need to work though Metalink Note 313418.1.
    Rod West

  • Using Business Area and Profit Center Accounting with New GL functionality

    Hello,
    We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
    -     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
    -     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
    -     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
    Thanking you

    Hi Sachin,
    Thank you for the reply, we want to know that
    -     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
    If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
    -     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
    -     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
    Thanking you
    Tipu Khan

  • Business area and profit center

    plz can anyone explain me what is the diffrence between business area and profit center.

    Business Area is a type of organizational unit structure, primarily used to facilitate external segment reporting across company codes, covering the company's main areas of operation. Business Areas run across company codes. The relationship is n:n. Business Area is part of FI. 
    Profit Center is also a type of organization unit structure, used for management/ internal controlling purposes. Dividing the company up into profit centers allows one to analyze areas of responsibility and to delegate responsibility to decentralized units, thus treating them as “companies within the company”. The profit centers also run across company codes. The relationship is n:n. Profit Center Accounting is part of Enterprise Controlling.
    While it may look apprantly that both Business Area and Profit Center do the same kind of analysis and reporting, with in SAP internal architecture they are kept in different modules and different tables.
    SAP Note 321190 provides the difference betwen Business Area and Profit Center, which you can get from SAP Service Market place.
    SAP has maintained Business Area from 4.6B onwards, while there are enhancements happening in Profit Center side.

  • How to restric the use of Business Area and Plant in PTC module

    Hi Expert,
    I am facing a problem with restricting the use of Business Area and Plant in PTC module.
    In this project we are trying to controle the user access or transaction as per the Business Area and Plant.
    We have applied same authorisation in the PTF module.
    Please help me if there is any authorisation object which give Plant and business area restrictions for all the transactions.
    Note: We have already inserted two authorisations object manually -
    1) F_BKPF_GSB
    2) A_IMPR_GSB
    but it's not working, is there any other way to restrict all the trasactions as per the Business Area and Plant.
    Regards,
    Venkatesh

    Hi,
    have you done OMJ7?
    Anyway you can assign plant to Branch and restrict by Validation rules (GGB4)
    Regards

  • Business Area and Salary Posting

    Hi Experts,
    I have Maintained IT0001 with one Business Area. And in the cost element (WBS maintained in IT0027) Business Area is different. Now while posting some GLs are showing double entry (ex. Net Salary Payable). If I change business area same as WBS in IT0001, posting is correct. But client wants cost to be booked in one Business area and Liability to be booked in different business area. is it possible? if yes then how?
    please advise...
    Nasim

    any comment please

  • LINK BETWEEN BUSINESS AREA AND MATERIAL NUMBER

    Hello EXPERTS,
    I have a report based on a custom table .The custom table contains company code, materials and their date run as primary keys.
    In the selection screen I am having one field business area, based upon the value entered in the selection screen in business area field I have to retrieve the corresponding materials.
    I want to know the relation between business area and materials ( resp. tables and primary keys)
    Plz any one guide me on this ...
    SRI

    hi ARS,
    Can u be more specific
    based upon the business area I have to retrieve materials... the report which I generated is based upon only one custom table.  In selection screen I am having business area field but it is not existing in the custom table...
    can any one guide me to solve this problem...
    SRI

  • Relation between business area and materials

    I have to extract the materials given the business area , can i use these the tables t134g and mbew for that . Both have common field valuation area , t134g has business area and mbew has material number in it. I appreciate your responses.

    Hi Deepthi,
    You can directly use MBEW table to retrive Materials for a particelar valuation type. No need to use MARA.
    Like this..
    Select MATNR from MBEW where BWKEY = 'Put valuation area you want'.
    Reward points if helpful.
    Regards,
    Pankaj Sharma

  • Link of Business Area and Company Code

    hii
    from which table i can find the link of Business Area and the Company Code....
    thanx in advance
    abhishek

    FILCA  table
    RCOMP and RBUSA

  • Payscale Area and Work hrs/period  - IT 0008

    Hi
    Can anyone please provide me with the linkage between the Payscale Area and Work hrs/period in Infotype 0008.
    The data for an employee reflects wrongly in the work hrs/period... Its ahould have a value 80.00 ad Biweekly and instead has 162.94 Monthly.
    Can anyone please tell me where these changes needs to be carried out
    Thanks,
    Sanjay

    Use Tcode SM30
    Type table  V_T508A
    Go to maintain
    Select your Work Schedule rule
    Go to details
    You will give the hours here that hour only disply in IT0007 and 0008
    Default that field is monthly hour field only it will display
    If you want to display Bi weekly hours you need to do the screen modifaction programming go to that field and put BI Weekly hours Data Element instead of Monthly hours field
    This will be not done with config only Abaper can do
    Best Regards

  • Move EUL or business Area to another schema?

    Hi,
    Is it possible to move EUL or business Area to another schema? I will develop EUL on my dev server and move to prod server. Does the schema nanem have to be the same? If it is a complex issue where can I find more info?
    Thanks

    Yes you can. You can either get the DBA to import the dev EUL layer into Production or you import your eex files into Production yourself.

Maybe you are looking for

  • Transferring an iMovie project from one computer to another

    I have an iMac with some iMovie projects that I want to work on through my MBP. What is the best way of doing this? Drop Box doesn't seem to be the way. Migration Assistant is an option I suppose but all I want to do is to be able to work on a projec

  • How to set up 'buy one get one free' modifier in Advanced Pricing?

    I am able to setup a promotional goods modifier and give the quantity of the promotional item as 1 and discount as 100%, but this works only of the quantity ordered for the primary item is 1. If the ordered quantity is 'n' (say 10), then the discount

  • Can't install Adobe Photoshop 7.0.1 update

    I installed Photoshop 7 in a customer's computer and when I am trying to install the 7.0.1 update I get a message that it cannot find the installation folder, even though it is there and the program sees it. I read that this might be an issue of the

  • Message not showing in SXMB_MONI

    Dear All, I have File - XI - RFC and RFC response - XI - File. After i put my file in the sender folder, the status in RWB: - file sender adapter executed successfully. - file receiver adapter also executed successfully - RFC receiver also no problem

  • Blackscreen cold start workaround and software conflict

    I, too, have the black-screen on cold-reboot problem, and resetting the PRAM is the best solution I have found, save this one: when I start, I always choose my startup disk by holding down the [option] key during reboot. This lets me choose the windo