Euphonix MC Transport
Hello Friends!
I inherited an audio/video Media controller by Euphonix called "MC Transport" and I wanted to know if anyone has used this product with Premier Pro CC. Any advise or ideas are greatly apprecitated! Thanks a bunch.
Oh Yeah! I have a Mac Pro Tower, osx.
Similar Messages
-
Final Cut Express 4 and Euphonix MC transport
Is there any reason why Euphonix MC transport does not support FCE4 when it works with Logic, FCP,Garage Band and Sound track pro
Final Cut Express HD are older versions of the application. The HD has been dropped from the name with FCE4.
-
Is there any reason why Euphonix MC transport does not support FCE4 when it works with Logic, FCP,Garage Band and Sound track pro?
Because Apple decided not to?
Who knows...well, Apple does. And they don't hang out here.
Shane -
Avid MC Transport Control Surface now working in CS 5.5
Not sure if anyone is interested, but because Adobe doesn't have a EUCON integrated support, it greatly limits the control surfaces that can be used with it.
I googled a bunch of different things but in the end it seems like the general conclusion was that the MC Transport doesn't work with Premiere Pro, not a big deal if you don't have one, but really sucks if you do have one and use Premiere for a lot of your work.
However, following the age-old adage of "never say die" I finally figured out a work-around that has my Avid MC Transport working pretty darn good with Adobe Premiere CS 5.5 on my Mac.
I posted it here: on creative cow where you can see the whole thread: http://forums.creativecow.net/readpost/3/911511
Hi Andree,
I had the same problem but figured it out, you can see it here http://wp.me/p1hbRg-e
or I'll paste it here for you as well:
I recently made the switch from PC to MAC for the long-form documentary I'm making. A decision that so far, I definitely regret. But more on that later.
For the moment I thought I'd start posting notes about problems I've run into and solutions to them that I've found in case any one else runs into these same problems.
I purchased the Avid/Euphonix MC Transport for use in my editing as having a jog/shuttle definitely speeds things up remarkably once you are accustomed to them.
However I didn't notice that Adobe Premiere was not supported and this is my editing program of choice although I do have FCP and Media Composer 5.52.
I googled around and even contacted Euphonix/Avid support and no one seemed to have a solution.
In frustration I then ordered a Contour Shuttle Pro v2 (which is sort of like downsizing from a Porche to a Honda. Both great cars, but which one would you kick out of bed first? Exactly.)
So while waiting for international shipping I tried a bit of a wild idea and I installed the drivers for both the Bella Pro Premiere keyboard (which I don't have) and the Contour Shuttle (which I don't have either) and then began customizing the MC Transport commands to match the command keys in Adobe Premiere.
As a note; you might not need to do this on your system. I'm using a Mac 12 core and this workaround only worked once I installed those drivers but logically speaking you shouldn't need to do it.
And hey! It works!!!!
Some things aren't as perfect as they are in Avid or FCP such as the shuttle wheel shifting to different speeds smoothly. But damn! The jog wheel works perfectly.
Customizing the Soft Keys just involves ensuring that Adobe Premiere Pro CS 5.5 is open and then choosing the soft key around the wheel and once it is highlighted in the EUCON controller, then assigning a KEY command.
For example your center three keys above the jog wheel should have J, K, and L assigned accordingly.
And however you wish to customize it after that. I use for cutting at timeline (CTRL + K), next edit (page down), previous edit (page up) and it is working like a charm.
All the other soft keys including shift command respond the same.
To program the jog wheel. Select it and choose Command, select Wheel from the drop down, then select jog right and choose special command and pick "right arrow" and then repeat for select jog left and choose special command and choose "left arrow."
The shuttle you have to choose the shuttle and again add a wheel command and then in choose shuttle and create a new shuttle wheel command. Then from shuttle drop down, choose for Section 0 add key and set it to K (stop), then for Shuttle Section 1 add L key once and for each shuttle section add one more L key. Shuttle section 7 has LLLLLLL assigned to it.
For the shuttle -1 Section choose J and for each minus section following that add one more J.
It's not perfect but it certainly does what I need it to do!
Hope that helps anyone else out there.
Best,
DariusThanks Pepe, seems to be a quick workaround! (FWIW in Logic 7.1, the command I see is Logic→Preferences→Control Surfaces→Rebuild Defaults. I assume that's what you're referring to.)
It'd be great if Apple/Tascam fixed this, but it only takes a second to rebuild the devices, so it's no biggie. -
Risky to buy Euphonix artists series right now ??
Due to space issues i have been wanting to get rid of my Logic Control and move to a euphonix. Today i got a great offer for the Logic Control, very very rare in my country.
But am scared about the future of Euphonix and Logic.
How is the compatibility at this time ? If they continue to support it the way it is, how much risk is there in buying a euphonix now ?
What do u suggest ? Hold on to the LC for now .... ?I replaced an old MCU with a Euphonix MC Mix last July and I am very happy with it. I was a little bit buggy at first but what isn't. I'm using it with LP9 and Snow leopard no problems. The space I saved
was worth the switch.
My desktop with MCU was MCU computer Keyboard Mouse, Imac and external monitor
With the Euphonix MC Mix its the same but with 5 hard drives USB FIrewire HUB Ethernet Switch Akai MPD24 and I just added a Euphonix MC Transport. Getting in and out of plugins are easy. It's definitely not a toy. I like the Mackie just too **** big. I still have room for another MC Mix or MC Control.
As far as the future since AVID bought Euphonix I don't know. Word is that EuCon would continue to be supported. I don't see why not it would be silly to lose Logic user and potential Logic users. -
Euphonix MC Control - doesn't seem to work for me..
Okay, I've been working with an "Euphonix MC Control" for the day.
The jog wheel doesn't seem to want to work in FCP - or it's full on.
The faders don't seem to want to respond to anything at all.
Nothing seems to be customisable, except for the 'softkeys' - which isn't very interesting to me, as I mainly wanted it for the transport, jogwheel, faders, and knobs.
Am I missing something?It speaks Eucon - which is one of the many competing new control languages there are around. Eucon is a nice idea - uses UDP/TCP packets over ethernet - so it can deal with multiple workstations and so on.
The server software is called "EuControl' - and is licensed with the hardware only, as far as I can see.
Yes - I understand what you are saying about volume knobs - but I think that you may be missing my point, which is that I want to be able to assign these faders to arbitrary controls across Mac OS Apps. I can do it with other midi devices - eg with Automap Pro (though Novation hardware doesn't come with mechanized faders - which is annoying).
Having paid a LOT of money for mechanized faders packeged with supposedly fully customisable server system, it's pretty annoying not to be able to use them outside of FCP and Logic. -
Error while transporting a Workbook
Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.RHi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat -
Unable to capture the Data Source into a Transport Request
Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu. -
Error while assigning objects to Transport Request
Hi All,
while assigning a Transfromation to a Treq i am getting an error saying
Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Kindly advice how to rectify this errorHi,
You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
See OSS Notes:
Note 613581 - Transfer structure does not exist in version 'D'
Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
Thanks
Reddy -
Error while transporting a data type
Hello all SAP PI Experts,
I'm trying to transport a data type but I'm getting the below mentioned error.
This is happening even when I gave the proper name of SWCV that contains this data type.
Please suggest how this problem can be solved.
Thanks,
Ajeya G VHi Ajeya,
An easy trick is to open the DataType on your Enterprise Service Builder, and once it is opened, (not edit, just open) go to Tools --Export Design Object
The correct SC will be filled as default. -
Error while transporting TP in production server in workflow
Dear All,
I have done some workflows . It is working fine in development in quality but in production while TP transporting it is showing error like ' Temporary log /usr/sap/trans/tmp/TP number not found'. why this error is coming ?
Please guide m . Its urgent.
Regards ,
ShitalShital,
Do you transporting those requests into PRD as Developer?
I think it is basis related issue, did you had any word with SAP basis person.
Any ways could you send long text when it is giving this error.
May be some sequencing issue in PRD?
Cheers
Jai -
Error while transporting the cube
Hi all,
While I was transporting my cube from Development box to Acceptance box, following error occured.
Execution of programs after import (XPRA)
Transport request : GCDK905220
System : NCA
tp path : /usr/sap/NCA/DVEBMGS01/exe/tp
Version and release: 372.04.10 700
Post-import methods for change/transport request: GCDK905220
on the application server: bdhp4684
Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
Program terminated (job: RDDEXECL, no.: 04522200)
See job log
Execution of programs after import (XPRA)
End date and time : 20080802045237
Ended with return code: ===> 12 <===
Actually transport failed but the cube was present in the Acceptance box in inactive state
Please help me for the same.
With thanks and regards
Mukul SinghalHi Mukul,
This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
I hope it will help you.
Regards
Suresh B.G. -
While transporting a role getting issue - Role type is undetermined
Hi
While trying to transport a single role getting the below error :
Role type is undetermined.
Can somebody help?
Regards
SaurabhSaurabh,
I faced something pretty much similar and snote:: "770358 - PFCG: Role copy fails due to data inconsistency" worked perfectly for me.
Snote describes quite nicely about the root cause.
Please note this error might come up when you try to copy this role, perform pfud as wel.
Thanks,
Brahmeshwar -
Error while transporting the Vendor in MM-SUS
HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish ShethHi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers. -
Hi,
I have this strange problem. I have added some transformation , DTP , infopackage and routines to existing data flow.
I have put them in a single request and tried to transport them to quality server.
Now I am getting error while moving it to the quality.
The error log says that one of the transformation has error in start routine. Where is that transformation doesn't exist in the system, not in active as well as inactive mode. I have checked in RSA1 as well as table 'RSTRAN'.
Same problem with some of the DTPs as well. They are in error and they doesn't exist in the system( table RSBKDTP).
Kindly help. Am I missing something.
Regards
VivekHi,
I have narrowed the problem. I had 4 transformation in that req, Now I have separate req for each transformation. Out of 4 req 3 has been transported successfully. Now I am having trouble with a single transformation and cause of the error is piece of code in include which I am using in a start routines.
LOOP AT source_package INTO ls_sourcepackage.
ls_i_mat-fpc = ls_sourcepackage-/BIC/dpmat. >> If I comment this line req get transported.
APPEND ls_i_mat TO i_mat.
ENDLOOP.
/BIC/dpmat is fiield in the structure of source package.
I am confuse why its giving trouble. The above transformation is from DataSource to Cube.
Regards
Vivek
Maybe you are looking for
-
Hello I'm new on apple user I quick windows because I can't used any more the computer to work because I bean attack heavy that I can used my pc they just freeze the pc. I spend allot of money for nothing, now I buy a used apple Mac, I used like 7
-
HELP ! After I upgraded my operating system on my mac, (from Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac
-
Error while approving change document(TR lost project code)
Hi All, I am having issue in change document approval, when we are approving change document for unit testing or if release management approving change for pre-production or production approval, we are getting error, I started coming from last two da
-
Compare two cells in a row and group of rows
Tuesdays 1st 2nd 3rd 4th 5th MB Jan 4, 2011 7 14 21 28 36 32 Jan 11, 2011 5 15 25 28 38 16 Jan 18, 2011 2 17 25 28 38 25 Okay, say the above is my table, how do I compare two cells in a row for two numbers? Say I wanted to find out if row A2 containe
-
How to check a particular string in address
hi, I need to check if my address has "freemans" or "foodstuffs or 'db.co.nz, then give a defautl email address. hence i coded like this zstmp_addr type ZCHAR60. IF ( ts_filerefs-zsmtp_addr CA 'foodstuffs' ) AND ( ts_filerefs-zsmtp_addr CA 'fr