Euro cutomization not maintained

Gurus
When Iam Creating Sales Order for a customer( Export customer) the system is showing the error "Pricing/euro: Attention: Euro Customizing not maintained"
But the document currency is in USD and Exchange rate is already maintained for USD.
So why the system showing the above error, plz let me know and how to solve it..
This question was posted before also by someone and not answered.
Thanx in advance
Rejit

Dear Rejit,
As suggested by Mr. Lakshmipathi, go to
T. Code: EWCF
(Path: SPRO - IMG - Cross-Application Components - European Monetary Union: Euro - Functions and Settings for the Dual Currency Phase - Confirm Currency Customizing)
There, you see four radio buttons. Select Confirm Euro currecny Customization and execute (F8).
Best Regards,
Amit.
Note: Irrespective of whether the order is in EURO or USD, since this is an export order (customer country is different from that company code) the system does this check.

Similar Messages

Pricing/euro: Attention: Euro Customizing not maintained

Hi All,
While creating Sales Order for EURO customer, it is giving following error :
Pricing/euro: Attention: Euro Customizing not maintained.
I have maintained EURO exchange rate in OB08 Transaction.
What could be the problem, give us immediate solution.
Yusuf

Hi Yusuf,
From the error its clear that its a problem of Pricing/Euro and euro customization,drill down the error and check the analysis fo theis error,if its there.
If not,check the customer master setting,as what is the customer pricing pro.
and also check the doc.pricing pro.
hope this helps to some extent.
SriRam

Error msg VH 777 "Pricing/Euro: Attention: Euro Customising not maintained

While running CO-PA Valuation (KEPM) we are getting error message
VH 777 (Pricing/euro:Attention: EURO Customising not maintained).
When we have done the previous valuation in Dec 2006, we have not
encountered this kind of error.
In the error message, the procedure has asked for note 91481 & 135661.
We have downloaded these notes, however as per system checked, this
cannot be implemented.
Our current version is 4.6C with package 47.
Appreciate your input.
Regards,
Robert

Hi
Tx. EWCF
Diony Ruiz R.

EURO CUSTOMIZING NOT MAINTAINED

Hi,
I am facing problem during making the commercial invoice for a perticular Export customer. The problem is arising due to comma (,) and fullstop (.) while mentioning the qty & price. In Qty column fullstop is reflecting instead of comma and in pricing column vise versa.
For example u2013 Qty 4.900 EA is reflecting in the invoice but it should be 4,900 EA.
Price u2013 229, 14 EUR is reflecting in the invoice but it should be 229.14 EUR
Also an error is coming while creating commercial invoice - "EURO CUSTOMIZING NOT MAINTAINED"
Please help.......
Regards,
Rajdeep

Hi
Please check in your user profile in SU01 under logon defaults select the required format.
For Euro customisation not maintained. Please search the forum
regards
Prashanth

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

HP Officejet 6500A Plus will not maintain wireless connection reliably

For the HP EXPERTS on Expert Day, April 18, 2012:
B.L.A.T. (Bottom Line At Top): We have an HP Officejet 6500A Plus purchased about 5 months ago. We wanted to use it as a wireless-connected printer in another room besides our home office. It is useless to us because it will not maintain its wireless connection, even sitting just a few feet from the router in the same room. Except for numerous hours of troubleshooting, we have left it sitting powered up, but unused and idle, for almost the entire 5 months in our home office. DURING ALL THAT IDLE TIME, IT HAS LOGGED OVER 3,200 DISCONNECTS, at a consistent rate of 24 disconnects every 24 hours, even though it ALWAYS reports that the wireless signal quality is “EXCELLENT” (all this is according to the Wireless Network Test Reports we’ve printed throughout the last 5 months). So our question is, what is it that this printer is trying to do once an hour over a wireless connection that is causing these thousands of disconnects? And how can we stop it?
NOTE! Before you round up the usual suspects (namely our router and our PC firewalls) please note that we also bought an HP Officejet Pro 8600 Plus ON THE SAME DAY as the Officejet 6500A Plus. The 8600 was also installed with a wireless connection, and has worked without a single network issue for the entire 5 months.
NOW, FOR THE REST OF THE STORY…
WHO WE ARE: My wife and I have worked on HP equipment for 33 years, starting in 1979 as corporate customers of HP when we worked for Exxon; then we both worked for HP directly for 17 years; and we’ve now used dozens of pieces of HP equipment in our home during the last 12 years in retirement. We’re primarily software folks, so we’re not exactly experts in hardware and networking, but on the other hand, this ain’t our first rodeo either.
OUR CONFIGURATION:
PC’s – All running Windows 7 x64 with all important patches applied and Norton Internet Security 2012: HPE-270f and HP AIO 200-Quad, each with full 6500A and 8600A drivers installed on wireless connection. These 2 PC’s themselves can connect either wirelessly or via Ethernet to our home network. The 270f has a dual-band wireless board. Both bands work. We also have a new dv7t laptop with only the full 6500A driver installed via wireless connection. The laptop is now upstairs and it’s connected to our home network wirelessly without any issues. (This is where we had hoped to also put the 6500A, but it needs to work reliably via wireless connection.)
ROUTER: Netgear N600 WNDR3700 providing Ethernet and wireless networking. Router provides a very strong wireless signal throughout the house. No wireless problems with any other equipment including an iPod, two Kindle Fires besides all the HP equipment.
PRINTERS: Besides the two HP printers, the HPE-270f PC has a Canon MP960 installed on it. And if we can’t get the 6500A working right or replaced with something that does work right, we may be buying our second Canon printer. By the way, on the 6500A, ePrint and App’s are set to ON, but of course they’re not being used, just like everything else on this AIO.
OTHER: We also have a Sonos music system that connects to our network via Ethernet and has its own proprietary mesh network (on another frequency) for transmitting ripped music wirelessly to speaker units throughout our house. (If you aren’t familiar with this totally cool system, check out sonos.com). We’ve never seen any evidence of interference between these two wireless networks, or our wireless phone sets either.
HP TOOLS AVAILABLE ON ALL 3 PC’s: HPU
UPDATE 5.003.001.001 (reporting everything up-to-date); HPHDU 3.1.0.17; HPPDU 5.0.0.015 and HPNDU 4.3.0.002.
SYMPTOMS: The 6500A Plus installs quickly and easliy, and connects wirelessly just fine during installation. But sometime over the next hour (usually less), it disconnects and won’t print from PC applications. Sometimes the application puts up an “Unable to communicate with printer” screen, even though the PC usually thinks the printer is “ready”. Other times, the PC thinks the printer is offline (but printers don’t have “offline” buttons anymore!). Often, if you just leave everything alone, the 6500A will somehow reconnect and print out the spooled file 5-30 MINUTES later. So it does usually seem to be able to recover given some time, but that doesn’t always fit our schedule! Occasionally, turning the wireless radio on the printer off and back on will fix it right away. But usually, you have to power the printer completely off, and then back on. As far as we know, that always fixes it…..until the next disconnect a few minutes later!
PREVIOUSLY TRIED: After reading some of HP’s wireless network support websites, I manually assigned a fixed IP address to this printer. It didn’t seem to matter; according to the wireless network test report, it still logs disconnects at the rate of one per hour, and all the failure symptoms were the same.
We also dabbled a bit with setting this printer as “trusted” to the Firewall, but that didn’t seem to matter either.
Next, we connected the printer via Ethernet. The printer immediately started to work, even though it had just been in its “failed” state over the wireless connection. As far as we know, it never failed while connected via Ethernet. This seems to point to a purely wireless hardware/firmware problem on the printer itself.
Late last year, I tried two different chat sessions about this with the inter-continental AIO support teams, each one lasting several hours. Unfortunately, none of their optimistic solution scripts seemed to fit our problem. They both seemed determined to reconfigure the 6500A as a TCP/IP printer, which of course worked fine initially, just like everything else. At this point, they would understandably want to close the chat. But 20-30 minutes later, we could no longer print to it. During the second chat, they got into one of our PC’s remotely and effectively turned off the spooler (by selecting “Print Directly” or something like that). After that, all was well again (as usual) UNTIL the printer disconnected, at which time attempting to print from that PC would HANG the application (since the spooler was no longer buffering) and eventually hang the whole PC. One giant leap backwards. That’s when I gave up on the multi-hour chat sessions.
The three diagnostic utilities (HDU, PDU, NDU) have been tried over and over. When the printer is in its disconnected state, the DU’s usually don’t detect the 6500A at all, or if they do detect it, they are unable to fix anything. Frankly, it’s easier to just power the printer off (which takes about a minute) and power the printer back on (which takes more than a minute) and then wait for the spooler to kick in (usually about 30 seconds). BUT WE DON’T CONSIDER THAT A SOLUTION!!
B.L.A.B. (Bottom Line At Bottom): We have used up nearly the entire black ink cartridge and at least a ream of paper troubleshooting this brand new printer, to no avail. This printer is useless to us unless it can maintain a wireless connection reliably. Please help!
Thanks –
Bob and Jane
(Note: we have an appointment from about 11:20 am EDT – 1 pm EDT, 8:20 am PDT till about 10 am PDT)

I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

Fiscal year variant is not maintained for calendar year 2009

Hi,
After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
Please provide some information/resolution to this.
Thanks,
Shantanu.

HI,
Please ensure that you have defined your fiscal year variant in OB29
correctly. It is necessary that:
1. the previous year has been maintained,
2. an entry for Dec 31 exists in each fiscal year,
3. the following fiscal year has been maintained.
Hope this helps.
Regards,
Nitin

Fiscal year variant Z1 is not maintained for calendar year 2012

I am getting this error while scheduling infopackage for 2lis_02_HDR.
Fiscal year variant Z1 is not maintained for calendar year 2012
PLease let me know how to solve thhe issue.
Thanks,
harika.

Hi,
Where are you geting error, before execution or duing execution of DTP in the log.
Check if you have transferred fiscal year variants from source system to BW. Then trigger DTP.
Regards,
Pravin Karkhanis.
Edited by: Pravin Karkhanis on Oct 18, 2011 4:15 AM
Edited by: Pravin Karkhanis on Oct 18, 2011 4:15 AM

Internal unit GAL, language EN is not maintained

Hi All,
i am facing problem with "Internal unit GAL, language EN is not maintained
Message no. BM302" error while running the report...some one gave solution for this problem..still i am getting same problem ....please any one give explaination about that error why it is coming like that and also solution?
Regards,
surendra.

hi..
i check it in that Tcode (S_BCE_68000183 or CUNI )..but it is not there..what can i do now?can any one explain about that problem? it means why it is coming like that?

Fiscal year variant Z1 is not maintained for calendar year 2012 when loadin

Dear Experts,
We are working on BI7.0 extracting data from ECC 6.0.
I am trying to load data from 0HR_PY_PP_1 which is a Self DataSource in our BW System (extracts data from 0EMPLOYEE and 0PERSON) to load into ZPA_C50 which is a copy of BCT InfoCube 0PAPA_C02 (Headcount).
The data has come through into the PSA very well.
However, DTP is throwing an error while loading 32242 records of data from PSA into ZPA_C50 InfoCube. The error details as below:
Error while updating to target ZPA_C50 (type INFOCUBE)
Fiscal year variant Z1 is not maintained for calendar year 2012 FGV 2
Messages for 1 data records saved; request is red acc. to configuration
Processing Terminated
We are actually doing a Re-implementation of BW 3.0b in BI 7.0 Ehp1. We have imported Maintenance of Fiscal Year Variant from the BW 3.0b Production System. So this shouldn't be a problem I guess since I have also checked the setting in SPRO in BI 7.0 Development (New) System and they are looking good.
Also, when I do a Filter on 0CALDAY in DTP from 01.01.1900 to 31.12.2010, the loads are working fine. I want the load to run without any Filters on 0CALDAY.
Has anyone been in similar situation. How did you resolve this issue? Your time is very much appreciated.
Thanks in advance.
Chandu

Dear Experts
Thanks for your time.
We have resolved this issue ourselves. We have maintained 'Shortened Fiscal Years' for 'Z1' and it is working fine now. Steps are as below:
In BI Dev System -> SPRO -> SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Intelligence -> General BI Settings -> Maintain fiscal year variant -> Select 'Z1' Fiscal Year Variant and then DoubleClick on 'Shortened Fiscal Years' to set the Fisc Year Variant -> Save.
The dataload should work fine now.
Cheers,
Chandu

Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
Ravi

Hi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi.

Unit of measure is not maintained at level2 DSO

Hi Experts,
Unit of Measure is not maintained in level2 DSO.
Scenario:
We have a Product having values for different market in DSO UOM is Millions and Aggregated Value of that product is loaded in upper level DSO Unit of Measure is not maintained it shows blank.
Solution: We have done selective deletion and uploaded again from the DSO where UOM is maintained correctly, Issue is resolved.
We would like to know the cause of the issue.
Please any let me know how to isolate the issue and if you have time let me call you to investigate further.
Regards,
Prem

Hi Murali,
UOM is maintained in level1 DSO correctly and for certain aggregated values it is not maintained and this very strange if we do manual upload data UOM is correct in Level2 DSO.
I guess issue happening in regular data load or what so ever....
We are trying to correct the data just by deleting and uploading again as this is permanent solution.
If routines are the issue when we upload manually it shouldnt work but still working fine... this strange behaviour....
please suggest and advise me... if required let me call you.
Regards,
Prem

Fiscal Year Variant not Maintained

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

hi,
please check the below path,
spro--Financial Accounting (New) -- Asset Accounting -- Valuation -- Fiscal Year -- Fiscal Year Variants -- Specify Other Versions on Company Code Level and Specify Other Versions on Depreciation Area Level.
check the above path, is there any FY is assigned to your company code or Depreciation Area.
regards,
Gopi.P

Logon Error Message - Enterprise Services Builder address not maintained

Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.

Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani

BP Relationship - Partner Function Assignment not maintained

During the initial load for CUSTOMER_REL the Partner Function Assignment is not maintained for the Relationship "Usage". We want to default this information based on the Sales Area data of the Sold to party and Partner Function maintain in the ECC KNVP and/or KNVK. Anyone have any experience in accomplishing this?

Hi
Go to transaction VOPA and maintain partner determination
In the customer master , VD01 maintain partners for this customer for whom you are creating the sales order
Hope this helps
Cheers
N Ganesh

Euro cutomization not maintained

Similar Messages

Maybe you are looking for