Euro exchange rate in sap 6.00 ecc version

dear all,
We are recently implementing sap in our company.we are following sap 6.00 ecc version. we have taken E.rate types B for selling , G for buying , M for average.
But for EURO it is asking for type EURX only.but I want to define buying and selling rates for EURO also.can anybody tell how to define buying and selling for EURO also.

Hi,
nevertheless you will always do the postings in M. If you want to post to use G or B you have to put in the rate type manually. That means you can maintain the KNVV-KURST manually with another course type.
to your problem. It is also possible to use the EURX. And in special cases like KNVV-KURST you can choose the exchange rate G or B manually. The document in this case will be posted later with G or B. KNVV is only an example
Please check. But it should work.
Best regards
Volker

Similar Messages

  • Automatic update of exchange rate in SAP B1

    Dear All,
    How to do automatic update of exchange rate in SAP B1as per the market variation
    Regards,
    Kumararaja

    Hello,
    after you defined exchange rates in define foreign currency exchange rates, you could run exchange rate differences in the module financials and set execution date to be today.
    Regards,

  • Maintain company code wise Exchange rate in SAP

    Dear SAP Experts,
    Is there any additional configuration to maintain company code wise Exchange rates in SAP?
    Awaiting for your valuable inputs......
    Thanks
    Madhusudhan.B

    Hi,
    Exchange rate table is not company code dependent. You can maintain, though, different exchange rate types.
    Regards,
    Eli

  • Exchange Rates in SAP

    Hi,
    Please could someone let me know where I can find Exchange rates in SAP, I mean which table I could find them.
    Thanks
    Ram.

    (Transaction OB08 or S_BCE_68000174)
    Table is TCURR.
    Many FM use this table, eg CALCULATE_EXCHANGE_RATE.
    Regards.

  • Exchange  rate in sap

    Dear sap guru
    My company code currency is SGD group currency is SGD. PO document type is OPO, PO date is 03.06.2009
    today when i am canceling PO then system is sowing error is "Enter rate SGD / EUR rate type EURX for 03.06.2009 in the system settings"
    But when i am running same scenario in testing server there is no error , in testing when i was creating PO then i got same error so i created in ob08 after po i deleted that exchange rate type for testing purpose . even after deleting i did not get any error. i canceled PO without any error.
    can anyone help me
      thanks
       vivek

    Hi,
    you have to configure the Exchange rate in OB08 for the particular date.
    Please check with SAP FI consultant he can give better inputs .Basically  this is a FI config .As a MM consultant we are aware
    of this t.code: OB08
    Regards
    Ganesh

  • How to post the revenue on exchange rate in SAP ?

    Hi All,
    a Company gets a g.l. bank account in USD (account currency). The local currency is EUR.
    2010.01.01: its balance was 9.527,23 USD (account currency). Given a currency exchange rate 1 USD x 1,4406 EUR, the amount of the account in local currency was 6.613,38 EUR.
    2010.01.15: the bank account is closed. Given a currency exchange rate 1 USD x 1,4374 EUR, the amount of the account in local currency is 6.628,10 EUR
    When the account bank is closed the balance in local currency  is 14,72 EUR -
    2010.01.01 --> 9.527,23 USD (account currency); 6.613,38 EUR (local currency).
    2010.01.15 --> 9.527,23 USD (account currency); 6.628,10 EUR (local currency).
    20.01.15: in local currency I've to post a revenu of 14,72 EUR
    Could anyone tell me which account posting I've to do for this revenue?
    Thanks

    The differemce is due to exchange rate difference post the difference in a new g/l name it exchange rate diff. revenue account for more read below:
    Exchange Rate Rounding Differences
    When an invoice is posted in a foreign currency, the amounts are translated into local currency. Since the system rounds off the amounts in each posting line, this can lead to rounding differences due to the currency translation.
    These differences are posted to an expense or income account.
    During the document check, the system displays a posting line for the corresponding account.
    Thanks,
    Vishal

  • Exchange Rate from SAP table

    Hi
    Any idea where can I extract out the exchange rate other then EKKO, as I'm in the mid of creating my own  PO report.
    I would like the exchange rate to be captured in the LIV instead of the PO.
    Any idea?

    Hi,
    Please check table TCURR for exchange rate.
    Regards,
    Mahesh Wagh

  • "Program for Currency Exchange rate updatein SAP"

    HI All,
    PLease provide me with the Program name for Currency exchange rate update.
    Thanks & Regards
    Harish

    HI
    You can use Program RSIMPCURR to automate.
    This program update the TCURR table everyday with correct exchange rate.
    Thanks
    Ranjith

  • Different Exchange Rate in VF01 And J1IIN (CIN Version).

    I have released a document in vf01(IN USD).There my exchange rate is 46.95 and in j1iin my exchange rate is 46.0655.So its creating difference in duties of billing and excise invoice.In Company code setting exchange rate type is M.Can any one suggest.
    From where it is picking this 46.0655 in j1iin.I have also checked in ob08 there exchange rate is 46.95. not 46.065.Suggest.
    Edited by: Pritesh kumar on Jul 6, 2010 11:29 AM

    In company code  setting already maintained M for ex invoice.APP / F110?Whats that.
    Edited by: Pritesh kumar on Jul 6, 2010 1:24 PM
    Edited by: Pritesh kumar on Jul 6, 2010 1:31 PM
    Edited by: Pritesh kumar on Jul 6, 2010 1:31 PM

  • Foreign Exchange Rate Type - M and EURO

    Hi All,
    My customer is maintainng the M exchange rate type as
    1 USD = 106 JPY
    along with this they are maintiaing a extra Exchange rate Type EURO as
    106 JPY = 1 USD
    Comany Code Currency is JPY.
    In the document Type level they are not maintaing any of the exchage rate type. Means system is picking default exchnage rate type. As we know M is the default exchange rate type.
    So, now customer doesnt want to maintain the EURO exchange rate type.
    So,  i want to know
    1. if customer not want to maintain the EURO exchange rate then it would give any impact on the working.
    2.Is any realtion between to maintain the two exchnange rate type.
    3. On a document level, can we know that by using which exchnage rate it was processed. whether its was processed from M or EURO. We want to know the Exchange rate type of each document.
    4. In M Exchane rate type we have both Direct and Indirect Quotation for same currency pair. So in this case which qutation system would take for the document processing as default quotation for a exchange rate type M.
    Looking for early response.
    Sachin

    1. if customer not want to maintain the EURO exchange rate then it would give any impact on the working.
    <There is no impact as long as this is not used by any other applications. For eg, In controlling, project system, budget, at FI document type level etc, we have option of choosing different exchange rate.
    2.Is any realtion between to maintain the two exchnange rate type.
    No relation
    3. On a document level, can we know that by using which exchnage rate it was processed. whether its was processed from M or EURO. We want to know the Exchange rate type of each document.
    < You can see this at Table level eg - BKPF. But at front end I dont think it is possible atleast upto 4.6C4. In M Exchane rate type we have both Direct and Indirect Quotation for same currency pair. So in this case which qutation system would take for the document processing as default quotation for a exchange rate type M.
    <To my knowledge, System will not allow to maintain rates in both types. so question of option doesnt come>

  • Exchange rate type

    Hello everyone,
    I would like to know the differences between the different exchange rate types, particularly EURO, EURX and M.
    From what I've read:
    EURO is the fixed currency between old EMU-participating currencies and the Euro (DEM<->EUR, ...).
    EURX is a variable rate between non-participating currencies and the Euro  (USD<->EUR, ...)
    What about M? What's the relationship between M and EURX?
    How are these exchange rates maintained?
    Is there such a thing as an average monthly exchange rate in SAP?
    Best Regards,
    Luís.

    Hi:
       M exchange rate type is maintained in Territory where floating rate of exchange is in voyage..ER are maintained in OB08 with type M along with rates for foreign currency,,TCURR and TCURF are the tables where ER are stored.Open item Valuation in foreign currency are done based on rates entered in OB08...Hence when ER is fluctuating we use an average ER type M as provided by SAP...This can also be made specific to document type in OBA7..
    Regards

  • Validity of exchange rates are not considered in APO DP planning books

    Dear SAP Gurus
    There are couple of posts on this topic without any conclusive reply and so I am posting this again.
    We plan and manage data in multiple currencies and wish to maintain the same in APO DP. We have defined an exchange rate type in the planning area  which is used for planning purposes. Please note that we have defined only one planning area  for all global products hence data is stored in one currency only.Exchange rates between different currencies for this exchange rate type are maintained in ECC and then transferred to APO via RSA1 using standard functionality. While exchange rates are maintained with validity (valid from date) in this table, APO DP planning books only consider latest exchange rates. This behaviour changes the data in the planning book every time there is a change in the exchange rates and is a complete nonsense.
    I believe there is a macro function CURR_CONV_FACTOR() which can be used to bring exchange rates as key figures in the planning book based on validity but given that this macro works only between 2 exchange rates and we use 10 different currencies, its not feasible to use this macro function for all combinations.
    Is there any other way to have exchange rates based on validity ? Does SAP has any guidelines / best practice on how to handle multiple currency scenarios in DP.
    We are on APO V5.1.
    Thanks
    Zorba

    Dear Nitish
    Thanks for the message.
    Unfortunately your observation is not correct. If you change an exchange rate with future validity,
    currency data in the entire horizon (past and future) adopts to that exchange rate.
    It doesn't matter whether KF is ready for input or not as data is stored in any one currency only in PA and conversion happen only when you change the currency in the planning book (column 0)
    Do some more testing and you will notice the above behaviour.
    btw, which version of SCM are you on ?
    Cheers
    Zorba, the Budha

  • Exchange Rates in Idoc

    Hi Experts,
    I am new to Idoc...I want a see a prototype of Exchange Rate from SAP 4.7 to ECC 6.0.
    Please do the needful..
    Regards
    Ram Ganji

    Structure of basic type EXCHANGE_RATE01
    Replication of Currency Rates
    E1EXCHANGE_RATE : Header Segment
    Status: Optional , min. number : 1 , max. number : 1
    Structure
    E1BP1093_0 : BAPI exchange rate table
    Status: Optional , min. number : 1 , max. number : 999999999
    Structure
    Segment structures
    E1EXCHANGE_RATE : Header Segment
    Segment definition E2EXCHANGE_RATE000 Released since Release 45A , Segment length: 0015
    LOG_SYSTEM : Logical system
    internal data type : CHAR
    Internal length : 000010 characters
    Position in segment : 001, Offset : 0063. external length : 000010
    UPD_ALLOW : Checkbox
    internal data type : CHAR
    Internal length : 000001 characters
    Position in segment : 002, Offset : 0073. external length : 000001
    CHG_FIXED : Changes Allowed for Fixed Exchange Rates?
    internal data type : CHAR
    Internal length : 000001 characters
    Position in segment : 003, Offset : 0074. external length : 000001
    DEV_ALLOW : Percentage Variance
    internal data type : NUMC
    Internal length : 000003 characters
    Position in segment : 004, Offset : 0075. external length : 000003
    E1BP1093_0 : BAPI exchange rate table
    Segment definition E2BP1093_0001 Released since Release 46A , Segment length: 0084
    RATE_TYPE : Exchange Rate Type
    internal data type : CHAR
    Internal length : 000004 characters
    Position in segment : 001, Offset : 0063. external length : 000004
    FROM_CURR : From currency
    internal data type : CUKY
    Internal length : 000005 characters
    Position in segment : 002, Offset : 0067. external length : 000005
    TO_CURRNCY : To-currency
    internal data type : CUKY
    Internal length : 000005 characters
    Position in segment : 003, Offset : 0072. external length : 000005
    VALID_FROM : Date from Which Entry Is Valid
    internal data type : DATS
    Internal length : 000008 characters
    Position in segment : 004, Offset : 0077. external length : 000008
    EXCH_RATE : Direct Quoted Exchange Rate
    internal data type : DEC
    Internal length : 000009 characters
    000005 decimal places, without sign
    Position in segment : 005, Offset : 0085. external length : 000011
    FROM_FACTOR : Ratio for the "From" Currency Units
    internal data type : DEC
    Internal length : 000009 characters
    No decimal places, without sign
    Position in segment : 006, Offset : 0096. external length : 000010
    TO_FACTOR : Ratio for the "To" Currency Units
    internal data type : DEC
    Internal length : 000009 characters
    No decimal places, without sign
    Position in segment : 007, Offset : 0106. external length : 000010
    EXCH_RATE_V : Indirect Quoted Exchange Rate
    internal data type : DEC
    Internal length : 000009 characters
    000005 decimal places, without sign
    Position in segment : 008, Offset : 0116. external length : 000011
    FROM_FACTOR_V : Ratio for the "From" Currency Units
    internal data type : DEC
    Internal length : 000009 characters
    No decimal places, without sign
    Position in segment : 009, Offset : 0127. external length : 000010
    TO_FACTOR_V : Ratio for the "To" Currency Units
    internal data type : DEC
    Internal length : 000009 characters
    No decimal places, without sign
    Position in segment : 010, Offset : 0137. external length : 000010
    Info...
    Automatically generated HTML doc.
    created on 31.07.2009 at 10:04:24
    Client 800
    System I01
    Release 700
    Lang. E
    Transaction WE60
    Display for Release 700
    Version 3 of IDoc record types : IDoc record types for SAP Release 4.0

  • GTS exchange rates

    Hello,
    Do you maintain exchanges rates in  SAP Customs Management >Master Data>Edit Exchange rates  for exchange rates used in Compliance Management - Legal control Export - Licensed shipments?
    Is there any standard program in place to have GTS get exchanges rates updated from the ECC system?
    Thank you

    Hi,
    in GTS 8.0 you can configure which exchange rate type should be used for your particular license type.
    I am not sure if this is only available in GTS 8.0 - but check your customizing:
    - IMG
    - - SAP Global Trade Services
    - - -  SAP Compliance Management
    - - - -  Legal Control Services
    - - - - -  Define License Types
    Check the drop-down-field and select the appropriate exchange rate (should be the same as used in your sales order). After that sync the exchange rates across your systems.
    hope that helps.
    Ralf

  • Problem with Exchange rate in PO

    Hello all,
    We have created a new exchange rate in SAP System. When we are creating a PO, the system is calculating the price by considering the new customized exchange rate which is correct. But while doing the goods receipt, the system is taking the standard exchange rate instead of the new one and calculating the price, which is wrong. So, can somebody tell me whether there is a configuration involved, so that the system should consider the new exchange rate instead of the old one while posting the GR??
    Please provide me some good suggestions on the above issue.
    Thanks and Regards,
    Umakanth.

    Hi,
    Can you please check the valid date of that exchange rate and the goods receipt posting date?
    Check in Purchase order also.
    Regards,
    Kumar

Maybe you are looking for

  • Bursting with Report's input parameters

    Hi experts, I am running BIP bursting feature, and this is working fine. Now, my customer is needing to enabling bursting feature by passing report´s input parameters. It is possible to set the bursting sql query to accept report´s input parameters?.

  • Headers/footers don't center correctly

    http://larrysullivandesign.com/_multimedia_info_test.html Done my best to check everything obvious. thanks!

  • Can I Bluetooth photos from my Mac to my iPad?

    I want to send pictures to my iPad from my Mac computer via Bluetooth? My Mac finds the iPad but that's as far as it goes. Any suggestions?

  • CAN'T READ ITUNES card

    Some lettering is missing on my (gift) itunes card

  • Standart painting and Tools

    Hello! I'm interesting in way to get access to the standart panel "Tools". Is it possible to insert my custom mode(s) like paint in this toolbar? I'm coding the plugin which looks like the standart painting, but some differs. I guess, I should create