Euro Sigle under Linux Server

'Lo
Do someone can help, for 3 days now i try to make € symbol work under pdf reports générated under linux server.
I have try metalink notes 291999.1 and 376775.1
But no way !
I alway got a glyph symbol¤ for exemple in place of €
Any idees are welcome
Lionel

Ok i have finaly found a solution :
You can found it here
Thank's anyway

Similar Messages

Rman of database under Linux from Windows server

Dear colleagues! I need some help.
I have Oracle database 10.2.0.1, which works under Linux CentOS. I've just set up rman, to backup this database to local linux partition. Now, i want to adjust rman, so it starts from Windows 2003 ( i've already install Oracle 10.2.0.1 client for Wondows 32-bit) server to backup this database to local Windows folder.Could you please answer, is it possible at all?
When i try to perform rman from Windows manually i got this errors:
channel t1: starting piece 1 at 29-APR-10
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 04/29/2010 03:07:32
ORA-19504: failed to create file "/u02/app/oracle/product/10.2.0/db_1/dbs/c:123
bak"
ORA-27038: created file already exists
Additional information: 1

1. You can run the backup from windows server 2003 which take the RMAN backup of your linux server. But this backup can only stored into your linux server.
2. You can't store the backup set of linux server into windows server.
Regards
Asif Kabir
-- mark your helpful post as correct/helpful.

Directory Server under Linux

I just installed Directory server under linux, the slapd starts ok after installation.
When I try ./start-admin I get this error:
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 05:54
failure: server initialization failed (Interrupted system call)
Ive searched a bit and all I found is "Install TOUR 2.2" but thats for HP-UX.
Any tips for Linux? This problem seems to be common.

We have Sun-DS version 5.2 on Debian Sarge. I have just upgraded Debian Sarge to Debian Etch on one machine and admin-server did not start. I try to find out and found, that on Debian Etch the uxwdog loads first following libraries: /lib/tls/i686/cmov/libcrypt.so.1 /lib/tls/i686/cmov/libc.so.6 /lib/tls/i686/cmov/libdl.so.2 /lib/tls/i686/cmov/libm.so.6 /lib/tls/i686/cmov/libnsl.so.1 /lib/tls/i686/cmov/libnss_compat.so.2 /lib/tls/i686/cmov/libnss_files.so.2 /lib/tls/i686/cmov/libnss_nis.so.2 /lib/tls/i686/cmov/libpthread.so.0 /lib/tls/i686/cmov/libresolv.so.2
But on Debian Sarge, it loads /lib/libpthread.so.0 /lib/libdl.so.2 /lib/libcrypt.so.1 /lib/libresolv.so.2 /lib/libm.so.6 /lib/libc.so.6 /lib/libnss_files.so.2 /lib/libnss_compat.so.2 /lib/libnsl.so.1 /lib/libnss_nis.so.2.
So I have tried to update start-admin script and inserted
export LD_PRELOAD="/lib/libpthread.so.0 /lib/libdl.so.2 /lib/libcrypt.so.1 /lib/libresolv.so.2 /lib/libm.so.6 /lib/libc.so.6 /lib/libnss_files.so.2 /lib/libnss_compat.so.2 /lib/libnsl.so.1 /lib/libnss_nis.so.2"
And now, it starts without problem. So I hope it's the solution.

Vhost configuration for Adobe Media Server running under linux.

Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and Regards

Dear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day!

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

I can't get Flashbuilder 4.6 to connect to remote Linux server on port 80

I'm using Flashbuilder 4.6 on a Mac (Snow Leopard). I have a new CentOS 6.2 Linux server with Apache webserver 2.2.21 on it, then installed GlassFish 3.1.1 application server on it, then installed mod_jk to connect Apache and Glassfish. Everything is installed on the same server. I verified that I can deploy an example war file (web application) in Glassfish and access it fine using either,
mydomain.com:8080/mywebapp (uses port 8080, which is direct connection to GlassFish)
mydomain.com/mywebapp (uses port 80, which enters Apache and passes through mod_jk to get to Glassfish)
This works well (no errors in any logs files).
Then I download BlazeDS from Adobe website, create a hello world application with it and deploy it in GlassFish. I next try to setup a new Flex Project in Flashbuilder 4.5. Using the wizard, I come to the section (under Server location) where I need to input a Root Folder and Root URL. Everything works fine when using a Root URL of http://mydomain.com:8080/mywebapp, meaning, I can click on the Validate Configuration button and Flashbuilder connects to the server.
But if I enter in the Root URL input field http://mydomain.com/mywebapp, then Flashbuilder cannot connect to the server. I need to eventually close port 8080, so I need this solution, which uses port 80, to work.
I made sure that the httpd.conf file VirtualHost section does include a `JkMount /mywebapp worker1` statement, and I can even look at the mod_jk.log file and see that Apache correctly opens a socket for mod_jk to communicate via AJP between Apache and GlassFish (with no errors or warnings) when the address `mydomain.com/mywebapp` appears on port 80. The GlassFish server.log file also shows no problems.
I'm stumped what to do next. Does anyone have experience connecting GlassFish, mod_jk, Apache, and Blazeds (or LCDS, should be similar)? If so, do you see any differences in my setup compared to yours? I'm only trying to use RemoteObject (not messaging, or streaming, etc.) with Java POJOs.

Hi!
Thanks for the reply. No, my ISP isn't providing me with three IP addresses, just one static address. And the VDSL modem...not a router, but beyond that, don't know much about it. Do have a switching hub, however, a gigabit thing that so far is working great.
Managed, somehow, to get everything working, however. Really don't know what I did. But I can now take the MBP off the wire and connect to the other Macs without turning on Airpot on those machines. Next step now is to take the MBP to another location and try to establish a connection to the home network via Desktop Transporter or Vine. That's the Holy Grail that will allow me to sever the cords that keep me from straying too far from home during working hours. Love to sit at that coffee shop across the park and do my work from there!

Problems importing to 8.1.6 SE under Linux from 8.1.6 Solaris

Dear collegues,
We used Oracle 8.1.6 SE under linux mostly for development and have a need do import production database into developement server. We recently upgraded RedHat 5.2 to RedHat 6.2 and omved to Oracle 8.1.6, but currently expirienced next problem:
IMP-00003: ORACLE error 1874 encountered
ORA-01874: time zone hour must be between -12 and 13
IMP-00000: Import terminated unsuccessfully
Import file made under Solaris when timezone set to usual POSIX value. Under Linux I tried to set TZ both to values like 'GMT+6' and according new glibc docs to 'Asia/Novosibirsk'. When I export and then import data on linux I have allthings OK. If I have files from 8.0.5 It's OK too. Does anyone expirienced such problems? Any suggestion?
Serge.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Graham Strang ([email protected]):
Hey all. Just to let you know that it is entierly possible to get Oracle to install under RedHat 7 and run happily. I have done it on two differenct machines. There is a bit of fooling with glibc to get it to work. However after you do that it works like a dream. VALinux has a work around posted at: http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/
The READEME.Oracle8i has the work around and the two tar balls are the necessary files. I followed the directions to the letter and they worked like a dream. Any questions feel free to drop me a line.
Cheers,
Graham<HR></BLOCKQUOTE>
OK, so i followed your instructions to the letter (several times), sure I get past the 80% bug but now I have new erros coming up , -"Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk". I get a whole series of these errors for various mk files. These errors apear during the link phase of the install, prior to the glibc workaround I was not getting this. I am a newbie to Linux and trying to give it a serious go but so far I have had little luck
Any help appreciated.
Nick
null

MICR font not displayed in PDF on SUSE Linux Server for Check Writer (XML)

We are generating checks by running the Check Writer(XML) concurrent request and are not able to see MICR fonts on the Check. We downloaded the free version from IDAutomationSMICR.ttf and the fonts were registered under /usr/local/fonts/micr directory. I registered in APPS and uploaded the file IDAutomationSMICR.ttf. Am I missing any steps. The DBA's have registered the fonts under /usr/local/fonts/micr on SUSE Linux Server . The custom Checks are generated but no luck with the fonts. Please advise. Can I download MICR fonts other than IDAutomation site? Appreciate your response.
Thanks,
Hari

I use version 11i, so the steps are probably different. Download a font file (gnuMICR for me). Extract it to a location of your choice on your operating system.
Follow these steps to load the MICR font to the server. (Step 11 was missing in some of the metalink documents in late 2007. I think Jan. 2008 will be OK).
1.     Log in as XML Publisher Administrator.
2.     Navigate to Administration->Font Files->Create Font File.
3.     Fields are Font Name and File. For Font Name choose any descriptive name. File will browse your PC to locate the font file.
4.     Navigate to Font Mappings->Create Font Mapping Set.
5.     Mapping name is the name you will give to a set of fonts. [MICR Font]
6.     Mapping code is the internal name you will give to this set. [MICR]
7.     Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
8.     Create Font Mapping (this allows you to add multiple fonts to a set).
9.     Font Family is the exact same name you see in Word under Fonts. If you don't use the same name the font will not be picked up at runtime. [GnuMICR]
10.     Style and weight must also match how you use the font in Windows. Normal and Normal are good defaults. [Normal, Normal]
11.     DO NOT enter Language or Territory
12.     Choose a value for Font Type. [Truetype]
13.     Search for the Font you just created in step 3. [GnuMICR]
14.     Navigate to Configuration -> FO Processing -> Font Mapping Set. Can also be done at data def and template level under Edit Configuration. Hierarchy is Site-> Data Def -> Template.
15.     Select your new mapping set.
16.     Make sure the font is not referenced under File->Properties->Custom in the RTF template file.
17.     Select a temporary directory on your concurrent processing node (Configuration -> General). This needs to be a private area not shared by other processes, read writeable by the applmgr (owner of the $APPL_TOP file system). It should be fairly large 5 GB or 20x larger than any datafile being used. The fonts will be downloaded here the first time they are used.
18.     Also at this site level select your font mapping set.
19.     Upload a template that uses your special font and test using preview.

Too many resources used under Linux

I have tested sun jvm under linux red-dat 6.2
and 7.1 (listed by Sun as official platform supported)
The JVM I test was from 1.3.0 to the 1.4.1
I have written a simple application server that
runs java application starting a new JVM.
When the java application runs (with the -server or
-hotspot option) I see that 10 java process are
istantiated. (10 JVM)
This is a real problem because for 4 users that runs 4
applications there are 40 JVM running
(each one allocates about 20 Mb of memory)
and the system became very slow.
With the -classic option the situation is better: only 1 JVM
for application is started, (the application is the same, I
have change only the -server option with -classic)
but JVM seems to be less stable: I have a lot of segmentation
fault errors. (with core dump)
With the new distribution of Sun JVM (1.4.1) the -classic option
is no longer supported.
Does anyone knows if is there a way to have only one JVM
for application? (-classic does not works well)
Is there others JVM for linux more stable instead of the Sun one?
PS: I have tested the same code under win/2000 using JVM 1.3.1_03
and the -classic option. All goes well (the same application):
I haver only 1 thread for application without jvm runtime error.
Now my doubt is: does Sun belive in the Linux Word?
JVM for Windows is much more stable!!!
Thank you in advanced and best regards.

I am assuming that you believe that there are 10 processes because that is what ps shows. However on Linux, each thread in a java program shows up in ps as a separate process. The memory for each "ps process" corresponding to a java thread is shared among all the threads of the JVM. Therefore if you see 10 processes with 20MB each you are not using 200MB, just 20.
If you are running 4 JVMs then you would be using 40MB not 800 as shown in ps.
I think Sun's JVM for linux is quite good (as I use it every day). If you need to run so many JVMs you should invest in more memory.
BTW, How much memory is installed in your system?

Idiot needs help! Setup Home Oracle Linux Server

I'm trying to setup a Linux server using an old PC. I can download Oracle Linux in a zipped file from Oracle. Then, I'm suppose to unzip using an Oracle supplied utility and burn the extracted files to a DVD. My client PC is running Vista Home. I'm a little confused on how I unzip the "Linux" files and burn them to a DVD. I would think this should all be done in a Linux environment/(or on a Linux box) - this is what I'm trying to setup. How do I get the ISO IMG files extracted and burned for a Linux boot cd? If it sounds like I don't know what I'm talking about, you're right - I don't.
HELP!
Edited by: 899355 on Nov 27, 2011 11:38 AM

Most PC's come with DVD/CD authoring software installed, like Nero or MagicISO maker, etc. What software do you have available? There is plenty of information available in Google about how to burn an iso image to dvd. Or you could check http://www.wikihow.com/Burn-ISO-Files-to-DVD. Whatever you choose, make sure to burn the raw ISO image and NOT the disk of the "mounted" .ISO image. I would also recommend 7-zip to unzip the downloaded files.
In case you are installing this for educational or development purpose and your PC has at least 4 GB of RAM you may consider to use free Oracle VirutalBox from http://www.virtualbox.org. It can boot and use saved .iso files without the need to burn media. This option will not jeopardize your Windows installation and allow you to run Linux as a Guest OS under your current Windows OS, when you need it. Don't fumble around with old fashioned dual-boot options - it's better to get some more cheap RAM and bigger disk if necessary. There are also pre-build virtual machines available at http://www.oracle.com/technetwork/community/developer-vm/index.html

Cannot start Cube Viewer under Linux

The following bug was found for Windows platform.
Do anyone have the patch for LINUX- SUSE. I have got the same problem under Linux but the patch is used for Window but it isn't any pacth for Linux there.
The below description ist the same as for UNIX.
fact: MS Windows NT
fact: MS Windows 2000
fact: MS Windows XP
fact: Oracle OLAP Server 9.2.0.1.0
fact: Oracle Enterprise Manger 9.2.0.1.0
symptom: Olap Cube Viewer cannot be started
symptom: An empty error window with a fire alarm symbol is displayed
cause: Running Oracle 9.2.0.1.0 Enterprise Edition with the OLAP option on
MS Windows.
In Oracle Enterprise Manager Console:
1. Startup the 9.2.0.1.0 Relational Database System.
2. In Enterprise Manager: Select subtree Warehouse + OLAP + Cubes + SH
3. Right-click on the COST_CUBE and select CUBE VIEWER from the popup menu.
Minimize the Oracle Enterprise Manager Console window to see the window that
is opened in the background. It says: "No materialized views have been
created for this cube ... Do you want to continue viewing the cube?"
=> select button "Yes".
Then the Oracle Enterprise Manager Cube Viewer starts loading. An error
window with a fire alarm symbol and with an OK-button appears. There is no
window title or error text displayed in the window.
Selecting the OK-button will close the cube viewer window and the 9.2.0.1
RDBMS instance is no longer running.
fix:
This problem is handled in <bug:2407685>
Apply the following 9.2.0.1 Oracle OLAP patch like described in the patch
readme file and reboot the machine (always create a backup before applying a
patch):
Patchnumber: 2323002
OLAPI API FAILS ON WINDOWS 2000 & XP
Product:Oracle OLAP Version:Oracle 9.2.0.1
Platform:MS Windows NT/2000/XP Server
To download the patch login to http:
//metalink.oracle.com
Select button "Patches", enter the Patch Number 2323002 and select
the "SUBMIT" button.
Thanks in advance for your help.
Mehdi

Patch/one-off 2323002 is not an issue with Linux. It addresses a bug on Windows 2000 & XP. Note that the Cube Viewer currently does not work with the SH Cubes. In short, there is an issue with support of denormalized snow flake schema. This will be fixed for Linux once the upcoming 9.2.0.2 patch set is released on MetaLink around Oct 4th.
Cube Viewer does require that the OLAPI jar files located in $ORACLE_HOME\olap\olapi\lib be the exact same version as the Database Server. So you may have to update the OLAPI jar files on the machine that is running Cube Viewer. Download from the Database Server the correct express*.jar file and copy it to the OLAPI lib directory. Another thing, you may be running into the bug where CV hangs while writing to the log file. To fix this problem, please email me and ask for the Cube Viewer zip. I'll send you some files and intstructions.

Forms6i under linux and save file on local pc

How to save a local file using form6i under a linux server? I can't usi win api and webutil...another way? Thx!

Here you go:
<%@ page import="
java.io.File,
java.io.OutputStream,
java.io.FileOutputStream,
java.io.ByteArrayOutputStream"
%>
<%
String contentType = "application/vnd.ms-excel";
String fileName = "testFile";
fileName = fileName + ".csv";
response.setContentType(contentType);
response.setHeader("Content-Disposition","filename="+fileName);
out.print("I am the only data in the file");
               String FileName = "c:/testFile.csv";
               OutputStream os = new FileOutputStream(FileName);
               ByteArrayOutputStream baos = new ByteArrayOutputStream();
               String text = "test string";
               byte buf[] = text.getBytes();
               baos.write(buf);
               baos.writeTo(os);
               baos.close();
               os.close();
%>

Errors occurs when localizing an Struts webapps in Tomcat5.0 under Linux.

I have an Struts webapps,which was deployed correctly and ran well in my Tomat5.0 under win2K.
Then i copied the webapps to the Tomcat5.0_HOME/webapps/ under Linux.
Then i copied all the struts *.jar files to the Tomcat5.0_HOME/common/lib.
With the web.xml and struts-config.xml configed well,i restarted the Tomcat and then found my webapps existing in the Tomcat5.0 by browsing the manager page of the container,and i found that my webapps run well.(The start hyper-link of my webapps in the manager page in not underline,this means my webapps have just run well and the web.xml is correct).
Then i access my login.jsp which runs well at my Win2k platform.
But errors occured at that time:
The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot find ActionMappings or ActionFormBeans collection
What's worong?

up

Crash (SIGSEGV, SIGILL) of 32bit Hotspot under Linux x86_64 in VMware

Hello!
A reproducible crash of these 1.6 32 bit Java VMs is hinderung my application from starting when I want to start it under a x86_64 Linux kernel in VMware (Workstation and ESX):
- java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Client VM (build 10.0-b22, mixed mode, sharing)
- java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Server VM (build 10.0-b22, mixed mode)
- java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b23)
Java HotSpot(TM) Client VM (build 11.0-b11, mixed mode, sharing)
Tested using there kernels:
- Linux debian 2.6.18-6-amd64 #1 SMP Sun Feb 10 17:50:19 UTC 2008 x86_64 GNU/Linux
- Linux openSUSE 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64 x86_64 x86_64 GNU/Linux
- Linux sles10-sp1-sdm 2.6.16.46-0.12-default #1 Thu May 17 14:00:09 UTC 2007 x86_64 x86_64 x86_64 GNU/Linux
Sproradic but reproducible JVM (Hotspot) crashes while running a simple garbage collector stress application several times in parallel. hs_err files are generated each time. However, the "Problematic frame" address and library changes every time!
Examples:
# Java VM: Java HotSpot(TM) Client VM (10.0-b22 mixed mode, sharing linux-x86)
# Problematic frame:
# C [libc.so.6+0xe4c9d] xdr_u_long+0xd
VM state:not at safepoint (normal execution)
# Java VM: Java HotSpot(TM) Server VM (10.0-b22 mixed mode linux-x86)
# Problematic frame:
# C 0xf7f56acb
VM state:at safepoint (normal execution)
# Java VM: Java HotSpot(TM) Server VM (10.0-b22 mixed mode linux-x86)
# Problematic frame:
# C [libnss_compat.so.2+0x2e16] nsscompat_getpwnam_r+0x46
VM state:synchronizing (normal execution)
The problem only appears using JDK or JRE 1.6 32 bit edition on a Linux 2.6 x86_64 kernel in VMware. Tests using real hardware, using a i686 kernel and using JDK / JRE 1.6 64 bit edition or JDK / JRE 1.5 (32 bit and 64 bit) could not reproduce the crashes.
Questions:
- Is there a general stability problem when starting the 32 bit Java VM under Linux 64?
- Does anybody have similar problems with
- Java VM 32bit under Linux 64?
- Java VM in VMware (both ESX and Workstation)?
Simple stress test application:
public class GCStress {
private static Thread[] threads;
private static java.util.Random random = new java.util.Random();
private static int maxBytes;
private static int numThreads;
public static void main(String[] args) {
numThreads = Integer.parseInt(args[0]);
maxBytes = Integer.parseInt(args[1]);
threads = new Thread[numThreads];
for (int x = 0; x < numThreads; x++) {
threads[x] = new Thread(new Allocator(), "Thread_" + x);
threads[x].start();
while (true) {
for (int x = 0; x < numThreads; x++) {
if (!threads[x].isAlive()) {
threads[x] = new Thread(new Allocator(), "Thread_r" + x);
threads[x].start();
try {
Thread.sleep(500);
} catch (InterruptedException e) {
// ignore
private static class Allocator implements Runnable {
public void run() {
while (true) {
int tSize = random.nextInt(maxBytes);
// System.out.println(Thread.currentThread().getName()
// + " allocating " + tSize / 1024 + "kb");
byte[] tMemFiller = new byte[tSize];
try {
Thread.sleep(random.nextInt(200));
} catch (InterruptedException e) {
; // ignore
}

The program is started like this:
./jdk1.6.0_06/bin/java -server -Xms32m -Xmx256m GCStress 500 10485760
And I run it usually 5 times in parallel. 1 time seems not to be enough (I should test that tonight).
However, I've tested using several -XX: flags, but nothing really helped! (-XX:+UseParallelGC, -XX:-UseTLAB, -XX:+UseSpinning -XX-UseThreadPriorities, -XX:-UseBiasedLocking, -XX:-UseLargePages)
About the lib: Every time, the content of hs_err is very different. I've also got
hs_err_pid6201.log:# Problematic frame:
hs_err_pid6201.log-# C [libc.so.6+0x5a261] IOwfile_seekoff+0x3b4
hs_err_pid7116.log:# Problematic frame:
hs_err_pid7116.log-# C 0x36343238
hs_err_pid7137.log:# Problematic frame:
hs_err_pid7137.log-# C 0xf7f17f67
hs_err_pid7192.log:# Problematic frame:
hs_err_pid7192.log-# C [libc.so.6+0x9d1ae]
hs_err_pid7223.log:# Problematic frame:
hs_err_pid7223.log-# C [libc.so.6+0xfef67] __register_frame_info+0xf
hs_err_pid7232.log:# Problematic frame:
hs_err_pid7232.log-# C [libc.so.6+0x109cdc]
hs_err_pid7239.log:# Problematic frame:
hs_err_pid7239.log-# C [libc.so.6+0x212b3] __newlocale+0x233
hs_err_pid8569.log:# Problematic frame:
hs_err_pid8569.log-# C [libc.so.6+0x562b9] IOgetline_info+0x52
hs_err_pid8571.log:# Problematic frame:
hs_err_pid8571.log-# C [libc.so.6+0x2b3] rtldglobal+0x2b3
hs_err_pid8573.log:# Problematic frame:
hs_err_pid8573.log-# C [libc.so.6+0x9b2b9]
hs_err_pid8596.log:# Problematic frame:
hs_err_pid8596.log-# C [libc.so.6+0x2e2d1]
hs_err_pid8615.log:# Problematic frame:
hs_err_pid8615.log-# C 0xf7e462b3
hs_err_pid8635.log:# Problematic frame:
hs_err_pid8635.log-# C [libc.so.6+0x9148c] glob64+0x40d
hs_err_pid8642.log:# Problematic frame:
hs_err_pid8642.log-# C [libc.so.6+0x722b9]
hs_err_pid8667.log:# Problematic frame:
hs_err_pid8667.log-# C [libc.so.6+0x67261]
hs_err_pid9957.log:# Problematic frame:
hs_err_pid9957.log-# C [libc.so.6+0xc5265]
libnss is linked during execution:
hs_err_pid7192.log:f7d77000-f7d7e000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7192.log:f7d7e000-f7d80000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7223.log:f7d6e000-f7d75000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7223.log:f7d75000-f7d77000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7232.log:f7db0000-f7db7000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7232.log:f7db7000-f7db9000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7239.log:f7dbc000-f7dc3000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid7239.log:f7dc3000-f7dc5000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8569.log:f7d4c000-f7d53000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8569.log:f7d53000-f7d55000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8571.log:f7da2000-f7da9000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8571.log:f7da9000-f7dab000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8573.log:f7d07000-f7d0e000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8573.log:f7d0e000-f7d10000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8596.log:f7d74000-f7d7b000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8596.log:f7d7b000-f7d7d000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8615.log:f7de0000-f7de7000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8615.log:f7de7000-f7de9000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8635.log:f7d27000-f7d2e000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8635.log:f7d2e000-f7d30000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8642.log:f7d30000-f7d37000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8642.log:f7d37000-f7d39000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8667.log:f7d3c000-f7d43000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid8667.log:f7d43000-f7d45000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid9957.log:f7d9a000-f7da1000 r-xp 00000000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
hs_err_pid9957.log:f7da1000-f7da3000 rwxp 00006000 08:01 422025 /emul/ia32-linux/lib/libnss_compat-2.3.6.so
Sample stack trace:
# An unexpected error has been detected by Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x67f69b57, pid=9123, tid=3902569360
# Java VM: Java HotSpot(TM) Server VM (10.0-b22 mixed mode linux-x86)
# Problematic frame:
# C 0x67f69b57
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x080a4c00): VMThread [stack: 0xe8947000,0xe89c8000] [id=9135]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x67f69b57
Registers:
EAX=0x67f69b57, EBX=0xf7f62ff4, ECX=0x000e89c6, EDX=0x00000000
ESP=0xe89c6934, EBP=0xe89c6968, ESI=0x080a4c00, EDI=0x080df118
EIP=0x67f69b57, CR2=0x67f69b57, EFLAGS=0x00010203
Top of Stack: (sp=0xe89c6934)
0xe89c6934: e89c6a10 eabdb800 eaaea220 eabdb838
0xe89c6944: 0003c586 000023af 0657221a 0805848c
0xe89c6954: eaaea220 eabdb838 080df0d4 080a4c00
0xe89c6964: 00000001 e89c6998 064e51cb 080df118
0xe89c6974: 08058350 e89c6998 0629cb5e 08058450
0xe89c6984: 0003c586 e89c69d8 f0c719a8 e89c6ae0
0xe89c6994: 00000001 e89c69b8 064e526c 080df0d4
0xe89c69a4: 080a4c00 00000000 064f6ddb 080df478
Instructions: (pc=0x67f69b57)
0x67f69b47:
[error occurred during error reporting (printing registers, top of stack, instructions near pc), id 0xb]
Stack: [0xe8947000,0xe89c8000], sp=0xe89c6934, free space=510k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x67f69b57
V [libjvm.so+0x4e51cb]
V [libjvm.so+0x4e526c]
V [libjvm.so+0x4f6cd8]
V [libjvm.so+0x34c60d]
V [libjvm.so+0x4dbe4c]
V [libjvm.so+0x31722e]
V [libjvm.so+0x5b83cf]
V [libjvm.so+0x5ba5bb]
V [libjvm.so+0x55a59d]
V [libjvm.so+0x322be7]
V [libjvm.so+0x2ce43b]
V [libjvm.so+0x3227f7]
V [libjvm.so+0x294845]
V [libjvm.so+0x322b8c]
V [libjvm.so+0x5edede]
V [libjvm.so+0x5fb0c7]
V [libjvm.so+0x5fa6dc]
V [libjvm.so+0x5fa8b1]
V [libjvm.so+0x5fa48f]
V [libjvm.so+0x4fe219]
C [libpthread.so.0+0x5192]
VM_Operation (0xe371ee1c): GenCollectForAllocation, mode: safepoint, requested by thread 0x08217000
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x082f6400 JavaThread "Thread_528" [_thread_blocked, id=12818, stack(0xddd8a000,0xddddb000)]
0x080db800 JavaThread "Thread_2" [_thread_blocked, id=9178, stack(0xe8547000,0xe8598000)]
0x080da400 JavaThread "Thread_1" [_thread_blocked, id=9177, stack(0xe8598000,0xe85e9000)]
0x080d9800 JavaThread "Thread_0" [_thread_blocked, id=9176, stack(0xe85e9000,0xe863a000)]
0x080c9800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=9162, stack(0xe86bb000,0xe870c000)]
0x080c8400 JavaThread "CompilerThread1" daemon [_thread_blocked, id=9155, stack(0xe870c000,0xe878d000)]
0x080bdc00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=9147, stack(0xe878d000,0xe880e000)]
0x080bc800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=9146, stack(0xe880e000,0xe885f000)]
0x080a9000 JavaThread "Finalizer" daemon [_thread_blocked, id=9137, stack(0xe88a5000,0xe88f6000)]
0x080a8000 JavaThread "Reference Handler" daemon [_thread_blocked, id=9136, stack(0xe88f6000,0xe8947000)]
0x08057800 JavaThread "main" [_thread_blocked, id=9126, stack(0xf7da4000,0xf7df5000)]
Other Threads:
=>0x080a4c00 VMThread [stack: 0xe8947000,0xe89c8000] [id=9135]
0x080cb400 WatcherThread [stack: 0xe863a000,0xe86bb000] [id=9174]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x08056388/0x080563b0] Threads_lock - owner thread: 0x080a4c00
[0x08056848/0x08056860] Heap_lock - owner thread: 0x08217000
Heap
def new generation total 7296K, used 7273K [0xe8c40000, 0xe9420000, 0xe9a70000)
eden space 6528K, 99% used [0xe8c40000, 0xe929c8f0, 0xe92a0000)
from space 768K, 98% used [0xe92a0000, 0xe935dee8, 0xe9360000)
to space 768K, 0% used [0xe9360000, 0xe9360068, 0xe9420000)
tenured generation total 47472K, used 17838K [0xe9a70000, 0xec8cc000, 0xf0c40000)
the space 47472K, 37% used [0xe9a70000, 0xeabdb838, 0xeabdba00, 0xec8cc000)
compacting perm gen total 16384K, used 1648K [0xf0c40000, 0xf1c40000, 0xf4c40000)
the space 16384K, 10% used [0xf0c40000, 0xf0ddc170, 0xf0ddc200, 0xf1c40000)
No shared spaces configured.
Dynamic libraries:
06000000-0665d000 r-xp 00000000 08:02 543502 /usr/java/jdk1.6.0_06/jre/lib/i386/server/libjvm.so
0665d000-066a1000 rwxp 0065c000 08:02 543502 /usr/java/jdk1.6.0_06/jre/lib/i386/server/libjvm.so
066a1000-06ac3000 rwxp 066a1000 00:00 0
08048000-08052000 r-xp 00000000 08:02 541414 /usr/java/jdk1.6.0_06/bin/java
08052000-08053000 rwxp 00009000 08:02 541414 /usr/java/jdk1.6.0_06/bin/java
08053000-083a8000 rwxp 08053000 00:00 0 [heap]
ddd8a000-ddd8d000 ---p ddd8a000 00:00 0
f7f87000-f7f88000 ---p f7f87000 00:00 0
f7f88000-f7f89000 rwxp f7f88000 00:00 0
f7f89000-f7fa3000 r-xp 00000000 08:02 1622023 /lib/ld-2.6.1.so
f7fa3000-f7fa5000 rwxp 0001a000 08:02 1622023 /lib/ld-2.6.1.so
fff5f000-fff68000 rwxp fff5f000 00:00 0 [stack]
ffffe000-fffff000 r-xp ffffe000 00:00 0 [vdso]
VM Arguments:
jvm_args: -Xms32m -Xmx128m
java_command: GCStress 2000 1048570
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=/sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin
LD_LIBRARY_PATH=/usr/java/jdk1.6.0_06/jre/lib/i386/server:/usr/java/jdk1.6.0_06/jre/lib/i386:/usr/java/jdk1.6.0_06/jre/../lib/i386
SHELL=/bin/bash
HOSTTYPE=x86_64
OSTYPE=linux
MACHTYPE=x86_64-suse-linux
Signal Handlers:
SIGSEGV: [libjvm.so+0x5edbc0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGBUS: [libjvm.so+0x5edbc0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGFPE: [libjvm.so+0x4fc630], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGPIPE: [libjvm.so+0x4fc630], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGXFSZ: [libjvm.so+0x4fc630], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGILL: [libjvm.so+0x4fc630], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: [libjvm.so+0x4fe670], sa_mask[0]=0x00000000, sa_flags=0x10000004
SIGHUP: [libjvm.so+0x4fe410], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGINT: [libjvm.so+0x4fe410], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGTERM: [libjvm.so+0x4fe410], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGQUIT: [libjvm.so+0x4fe410], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
--------------- S Y S T E M ---------------
OS:openSUSE 10.3 (X86-64)
VERSION = 10.3
uname:Linux 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64
libc:glibc 2.6.1 NPTL 2.6.1
rlimit: STACK 8192k, CORE 0k, NPROC 16384, NOFILE 8192, AS 3334080k
load average:13.01 11.87 9.18
CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 4 stepping 8, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2063116k(334428k free), swap 2104472k(2104472k free)
vm_info: Java HotSpot(TM) Server VM (10.0-b22) for linux-x86 JRE (1.6.0_06-b02), built on Mar 25 2008 00:26:44 by "java_re" with gcc 3.2.1-7a (J2SE release)
time: Thu May 15 13:26:54 2008
elapsed time: 365 seconds

Installing Access Manager under App Server platform

We have done an install of Access Manager 2005Q1 under App Server platform edition 2005Q1 (v8.1) on Linux Redhat Enterprise edition (v3).
When starting up Access Manager, we get a NoClassDefFound exception. Some postings mention some issues with the SUN mobile access, and suggest uninstalling / reinstalling, but these seem to apply to Solaris only. We have had no luck with this suggestion with Linux.
Does anyone have any other suggestions?
Thanx,
GB
[#|2005-09-14T10:50:34.118-0700|SEVERE|sun-appserver-pe8.1_01|javax.enterpri
se.system.container.web|_ThreadID=10;|WebModule[/a
mserver]Exception starting filter amlcontroller
java.lang.NoClassDefFoundError
at com.iplanet.services.ldap.LDAPUser.getPasswd(LDAPUser.java:117)
at
com.iplanet.services.ldap.ServerInstance.getPasswd(ServerInstance.java:128)
at
com.sun.identity.security.ServerInstanceAction.run(ServerInstanceAction.java
:92)
at java.security.AccessController.doPrivileged(Native Method)
at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:210)
at
com.sun.identity.sm.ldap.SMSLdapObject.initialize(SMSLdapObject.java:143)
at
com.sun.identity.sm.ldap.SMSLdapObject.<init>(SMSLdapObject.java:118)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAcces
sorImpl.java:39)
at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstruc
torAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at com.sun.identity.sm.SMSEntry.<clinit>(SMSEntry.java:116)
at
com.sun.identity.sm.ServiceSchemaManager.<clinit>(ServiceSchemaManager.java:
67)
at
com.iplanet.am.util.AMClientDetector.getServiceSchemaManager(AMClientDetecto
r.java:219)
at
com.iplanet.am.util.AMClientDetector.<clinit>(AMClientDetector.java:94)
at com.sun.mobile.filter.AMLController.init(AMLController.java:85)
at
org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilter
Config.java:229)
at
org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFil
terConfig.java:312)
at
org.apache.catalina.core.ApplicationFilterConfig.<init>(ApplicationFilterCon
fig.java:83)
at
org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:38
81)
at
org.apache.catalina.core.StandardContext.start(StandardContext.java:4528)
at com.sun.enterprise.web.WebModule.start(WebModule.java:241)
at
org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1086)
at
org.apache.catalina.core.StandardHost.start(StandardHost.java:833)
at
org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1086)
at
org.apache.catalina.core.StandardEngine.start(StandardEngine.java:483)
at org.apache.catalina.startup.Embedded.start(Embedded.java:894)
at com.sun.enterprise.web.WebContainer.start(WebContainer.java:707)
at
com.sun.enterprise.web.PEWebContainer.startInstance(PEWebContainer.java:507)
at
com.sun.enterprise.web.PEWebContainerLifecycle.onStartup(PEWebContainerLifec
ycle.java:54)
at
com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java
:300)
at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]

Everytime I click the Access Manager in the JES 2005Q4installer the directory server would click itself. Unchecking this prompted me for a remote repository which worked.
I wasn't able to get the install to complete with the state file, it stopped before configuring access manager.

Euro Sigle under Linux Server

Similar Messages

Maybe you are looking for