Eurocom and Cisco Call release

Hi Pros,
I have a problem here, I been trying to resolve this issue for months.I still dont find out what the magic fix is.
There it is, I have a telecom system: A Gateway PRI, a 2801 which does only translation between the PSTN network and the Iridium Network(satellite-8816), and a few Eurocom Unit connected to the 2801 via FXO port.
The communication flow works great, the issue I am having is sometimes certains calls can stay up for more than 24 hours!!!
When this happens, I have to physicly shutdown the port or reboot the 2801. Still can find out whether this Eurocom common issue or it cisco!
With this issue going on for months, I am pretty sure that we been over-bill our customer.
Any ideas or suggestions are more than welcome and thanks in advance for your help guys.

Any ideas guys???!!

Similar Messages

  • Windows 8 and Cisco Call Connector

    Hi,
    Does Cisco Call Connector work on Windows 8?
    We have a customer running Windows 8 and they have encountered the following error when they tried to install it.
    Thanks
    Raymond

    try using PPTP vpn. it will work without Cisco vpn client. below is config example.
    http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
    hope this helps.

  • Connectivity Issue between ASA 5520 firewall and Cisco Call Manager

    Recently i have installed ASA 5520 firewall, Below is the detail for my network
    ASA 5520 inside ip: 10.12.10.2/24
    Cisco Switch 3560 IP: 10.12.10.1/24 for Data and 10.12.110.2/24 for Voice
    Cisco Call Manager 3825 IP: 10.12.110.2/24
    The users and the IP phone are getting IP from the DHCP server which configured on cisco 3560 Switch.
    the Default Gateway for Data user is 10.12.10.2/24 and
    for the voice users is 10.12.110.2/24
    now the problem is that the users is not able to ping 10.12.110.2 call manager. please if somebody can help in this regard. i will appreciate the prompt response against this issues.

    Actually i don't wana to insert new subnet and complicate the nework. i need a simple way to solve the problem. below is the details for the asa 5520 config.
    ASA Version 8.2(1)
    name x.x.x.x Mobily
    interface GigabitEthernet0/0
     nameif inside
     security-level 99
     ip address 10.12.10.2 255.255.255.0
    interface GigabitEthernet0/1
     nameif outside
     security-level 0
     ip address x.x.x.x 255.255.255.252
    object-group service DM_INLINE_SERVICE_1
     service-object tcp-udp
     service-object ip
     service-object icmp
     service-object udp
     service-object tcp eq ftp
     service-object tcp eq www
     service-object tcp eq https
     service-object tcp eq ssh
     service-object tcp eq telnet
    access-list RA_VPN_splitTunnelAcl_1 standard permit Inside-Network 255.255.255.0
    access-list RA_VPN_splitTunnelAcl standard permit Inside-Network 255.255.255.0
    access-list inside_nat0_outbound extended permit ip Inside-Network 255.255.255.0 10.12.10.16 255.255.255.240
    access-list inside_nat0_outbound extended permit object-group DM_INLINE_SERVICE_1 10.12.10.16 255.255.255.240 Inside-Network 255.255.255.0
    access-list inside_nat0_outbound_1 extended permit ip Inside-Network 255.255.255.0 10.12.10.16 255.255.255.240
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu mgmt 1500
    ip local pool VPN-Pool 172.16.1.1-172.16.1.30 mask 255.255.255.0
    ip local pool VPN-Users 10.12.10.21-10.12.10.30 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-641.bin
    asdm history enable
    arp timeout 14400
    global (inside) 2 interface
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound_1
    nat (inside) 1 Inside-Network 255.255.255.0
    route outside 0.0.0.0 0.0.0.0 Mobily 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http Mgmt-Network 255.255.255.0 mgmt
    http Inside-Network 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
     authentication pre-share
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto isakmp policy 30
     authentication pre-share
     encryption 3des
     hash md5
     group 2
     lifetime 86400
    telnet Inside-Network 255.255.255.0 inside
    telnet timeout 5
    ssh Inside-Network 255.255.255.255 inside
    <--- More --->              ssh timeout 5
    console timeout 0
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy RA_VPN internal
    group-policy RA_VPN attributes
     dns-server value 86.51.34.17 8.8.8.8
     vpn-tunnel-protocol IPSec
     split-tunnel-policy tunnelspecified
     split-tunnel-network-list value RA_VPN_splitTunnelAcl
    username admin password LPtK/u1LnvHTA2vO encrypted privilege 15
    tunnel-group RA_VPN type remote-access
    tunnel-group RA_VPN general-attributes
     address-pool VPN-Users
     default-group-policy RA_VPN
    tunnel-group RA_VPN ipsec-attributes
     pre-shared-key *
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip 
      inspect xdmcp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:e5a64fa92ae465cd7dabd01ce605307d
    : end

  • CallRex and Cisco Call Connector software

    I'm quoting a UC560 solution for a client that needs call recording along with Call Connector.  I am interested in CallRex but it appears it is based on TAPI and therefore, unlikely to get it setup in the same environment as Call Connector. Am I correct in assuming I can't get both for the same phones?  Anyone have experience with this or any recommendations or workarounds?  I'm also looking at TIM Talk, but I may only need to do a few phones and CallRex appears attractive for recording only a few select phones based on their user cost.   
    thanks,
    Steve

    Hi Nathan, from my understanding CallRex registers the TAPI under the ephone, correct?  The Cisco Call Connector also does the same thing. In the past I've had issues trying to setup the UC system to dial out from a CRM along with having the Cisco Call Connector. In this experience I had an issue as the Call Connector server would register and hold onto the TAPI for that ephone and it broke the dial out function of the CRM.  So you are saying to setup a dual endpoint on the Cisco device, one being hard phone and one being a softphone, registering 1 TAPI to CallRex and the other TAPI to Call Connector? 
    If that's the case though, the softphone would need to be on at all times in order for it to register the TAPI, correct?  Am I understanding this or missing something?

  • Transfer VOIP Calls Between Cisco Desk Phone and Cisco Jabber For IPhone 9.5

    Does anyone know how to transfer an active voip call from a Cisco IP Desk Phone to Cisco Jabber for IPhone?  I can transfer a call from Cisco Jabber for IPhone to my Cisco IP Desk Phone no problem.  I put the call on hold and then click "Resume" on my Cisco IP Desk Phone.  However I cannot do the same but the other way around.  If I put the call on hold on my Cisco IP Desk Phone, I see "no active call" on my Jabber client.  The only information I could find slighlty relevant was using the Mobility Key/Remote Destination Profile feature however this defeats the object as this will forward to an external number, e.g. mobile and I just want to transfer the call within the VOIP environment between the two devices that are using the same directory number.
    I am using Cisco Call Manager 9.1(2), Cisco Presence 9.1 and Cisco Jabber for IPhone 9.5.
    Any help would be greatly appreciated.
    Kind Regards,
    Paul Parker.

    Did you ever find an answer to this ?
    I am seeing the same behavior and trying so see if I can put calls on hold and pick them up both ways also.
    The only answer I seem to have found is to use park instead
    That would/should work but I would just prefer to hold/unhold
    Just not sure why we would not be able to hold/unhold on what is essentially a "shared" line
    Does anyone have this working for them ?

  • Need to disable logs of Received and placed calls in cisco

    Hi All,
    How and Where do i disable the logs of received and placed calls in cisco phone configuration?
    I am using CUCM V7X.
    Thanks in advance !!!!

    I've tried them all and nothing beats Verizon. All around. I live in a building with metal walls and couldn't get reception with my iPhone 5. I looked on eBay and saw a Verizon Wireless Network Extender actually made to Verizon specs by Samsung. I checked the prices and a new one from Verizon was $159.00. I got one on eBay for $59.00 free shipping. Hooked it up, called Verizon for free activation and now I always have 5 bar reception. No additional charges besides purchasing the extender. Out of 5 different providers including AT&T I get the best reception everywhere with Verizon.
    Just thought you might want to know.

  • Cisco Call Manager and MGCP Question

    Hello,
    I appreciate if somebody can help.
    Scenario:
    Site 1 PSTN E1----VG----Call Manager----VG--- PABX---Site 2 PSTN1 E1
    I have configured a dialing pattern on Cisco call manager 6.xxxxxx to Send to VG on Site1
    Both VG routers are using MGCP with call Manager.
    The problem if from Site 2 tries to call 6xxxxxx the call manager is not routing the call to the VG in site 1.
    I did debug ccapi inout and on Site 2 VG the call response was the number unassigned. This means that the call Manager is searching the directory for the destination but it is not searching the route patterns.
    Any ideas to override this and ask the call manager to check it's destination pattern?
    Thanks,

    Problem solved. The VG in Site 2 was in a CSS that is not allowed to dial PSTN.
    Regards,

  • Cisco Call Manager 8.5 and Lync 2013

    Dear all,
    Our customer wants to integrate their Lync 2013 to the Cisco Call Manager 8.5.
    Out of some not so recent information i thought that if u want to use the enterprise voice of lync you'll have to make a sip trunk between Cisco Call Manager & Lync 2013.
    I think that this still counts, i've also heard that there have been a moderate amount of changes between cucm 8.5 and cucm 8.6 on matters of sip.
    I'm unable to find them though, also what does CUCI - Lync do?
    Kr,
    Yannick Vranckx

    Hi Yannick,
    There can be three types of integrations between Lync and Cisco Systems
    1)      Direct SIP Trunk between Lync Server and Call Manager - In this, we can setup shared line between Cisco extensions and Lync extensions, and Sip trunk between the servers. Any Cisco phone / Lync client  can call each other vice-versa. Initial setup needs planning, but later it does not need much configurations in client side. The following document explains the configurations needed.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucilync/9/CUCI_BK_C0B36AC1_00_cisco-uc-integration-for-microsoft.pdf
    2) CUCILYNC, which is like Cisco Jabber client but connects with Lync and Call Manager: Lync Client <----> CUCILYNC <-----> CUCM
    In this option, a plug-in is installed in each client side. Although initial configurations is easier, each user needs to install the client and operate it. The below document explains the configuration and setup.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucilync/9/CUCI_BK_C0545A41_00_cisco-uc-integration-for-microsoft.html
    3) RCC (Remote Call Plugin) which just provides basic call control feature but for that you need Cisco Unified Presence Server: Lync Client <----> CUPS <-----> CUCM
    HTH
    Manish

  • Cisco Call Manager MIB and OID.

    Hi,
    One of our customer has developed their own NMS software to manage multiple OEM products.
    They want to integrate Cisco Call Manager 7.0 and Cisco Router with the NMS software for monitoring/managing of Voice traffic.
    The monitoring of CUCM 7.0 will consists of the following-
    1. Call History
    2. Missed calls.
    3. Calls in progress,
    4, Dropped Calls.
    The Monitoring of Cisco Router will Consists of Interface statistics and Portwise Traffic statistics of LAN and WAN Ports.
    I believe this monitoring is done through Call Detailed Record and if I will load the CDR MIBs in NMS software it will be able to log CRD logs from CUCM 7.0.
    Please suggest that if the same is possible.??.
    kindly help me in getting the MIBs/OIDs for the same.
    Best regards,
    Puneet K.

    Hi,
    For 200+ users you should better go with Cisco CallManager (CUCM). Although ISR G2 supports 250+ users, it will not provide clustering mechanism and additional HA capabilities as CUCM does.
    You can read the Call Processing chapter of the CUCM SRND:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/callpros.html
    Hope to help, please remember to rate helpful posts.
    Kind regards,
    - Adrian.

  • Cisco Call Manager and LifeSize Endpoints

    Hello dear support community,
    last week I asked which version of Cisco Call Manager supports BFCP (https://supportforums.cisco.com/message/3966334).
    Unfortunately I asked the wrong question.
    As it turns out I just didn't need to know which version of Call Manager supports BFCP, which I know now, I also need to know if Call Manager is compatible with LifeSize systems?
    Here is the setting, so you know what I'm dealing with:
    The costumer uses Cisco Call Manager (Ver. 9.1) as SIP registrar for his LifeSize endpoints. The problem is, when he is making a video conference (via SIP) and he wants to share a presentation, the other side either sees him or the presentation, but not both.
    We tried it with our Call Manager (Ver. 9.0) and some LifeSize endpoints. As soon as the LifeSize endpoint uses CUCM as SIP registrar, the option to share the presentation is completely gone. 
    I guess the costumer switched sources from cam to pc. That would explain why he just sees either video or presentation. But, as you might have guessed, it's not an acceptable solution for the costumer.
    And yes, we made sure that BFCP is enabled for the endpoints.
    So, what I'm asking myself and you is:
    Is this known? And more important, is there a reliable workaround?
    Thanks a lot in advance.
    Best regards
    Tobias

    I've been down this road and when I asked the question Lifesize's stance was that it wasn't supported by THEM. I pointed out that CUCM now supports line-side BFCP but they essentially shrugged their shoulders. Either they are blatently disabling content sharing by virtue of using a SIP Proxy or they have a priorietary SDP/header that CUCM isn't passing through.
    Either you can call Lifesize and shake them up a bit or you can wireshark the SIP dialog to see what the codec asks CUCM before disabling the sharing button. Once you know that you might be able to use SIP transparancy to pass the header through.

  • Cisco Call Manager 5.1 and Cisco VoIP Gateways

    Hi,
    I have Cisco Call Manager 5.1 with Cisco 2800 series routers as a ISDN gateways and Cisco VG224/ATA 186 as POTS gateways. While Cisco Call Manager collects call statistics from 7900 series SCCP handsets managed by the Call Manager (number of VoIP packets, dropped frames etc.), it shows only one side of the call as it does not collect statistics from the Cisco routers (configured as H.323 gateways), the Cisco VG224 (with ports configured as H.323 gateways and as a SCCP devices) and Cisco ATA 186 (configured for SCCP).
    Is the collection of these statistics possible? What needs to be done?
    Thanks,
    Paul

    Update: Logging of QoS/Call Management Records (CMR) to Call Manager CDR database is not possible with H.323 gateways; only MGCP gateways:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a008020650a.shtml#qa4
    Anyone know how to get the Cisco router gateway to log these statistics anyway using standard router logging mechanisms (e.g. syslog)?
    Anyone know about calls to SCCP ports on Cisco VG224 or ATA 186?
    Thanks,
    Paul

  • Cisco call manager and ip phone software.

    Hi everybody.
    Does Cisco call manager also include software required for ip phone? Or software for ip phone needs to be installed on tftp server and it does not come with cisco call manager.?
    thanks and have a great weekend.

    Hi Sarah,
    by ip phone software, do you mean Cisco IP Phone Agent software?
    if  yes, then you need to have Customer Response Solution (CRS) and Call Manager together to setup ip phone software (services).
    check this link for further info:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801c5765.shtml
    plz Rate if it helped.
    Soroush.

  • MGCP Gateways and Cisco Fax

    We are considering adding a fax solution to our IPT infrastructure using Cisco Fax (Captaris RightFax). Ideally we would like the same voice gateways to terminate the fax calls (internal voice calls use QSIG and external calls use Q.931). Can this be achieved with MGCP-controlled Voice gateways? Can T.38 fax be configured with an MGCP gateway. I have seen examples where H.323 dial-peers are required to talk SIP to the Fax Server.
    If not, is an alternative to use a back-to-back PRI connection between a voice gateway port and the Fax Server ISDN card, with appropriate route patterns in CallManager to route the fax calls to Fax Server, using Cisco Fax Relay?

    with cm 4.2.3 there is mgcp t.38 support implemented.
    see release notes cm 4.2.3
    http://www.cisco.com/application/pdf/en/us/guest/products/ps6729/c1178/ccmigration_09186a0080724724.pdf
    regards
    mehmet

  • Cisco call manager integration with mediant

    How can we add and integrate mediant with cisco call manager ?
    Can you have doc for this kind of setup ?

    Hi Sachin,
    We do run a hybrid Callmanager to Nortel Meridian setup (works well).
    Here are some great docs;
    Cisco Unified CallManager
    Case Study: Nortel 61C PBX to Cisco IP Telephony Migration
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_white_paper09186a00801115e0.shtml
    Nortel Meridian PBX and Cisco CallManager Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008011888c.shtml
    Cisco Unified CallManager System Guide, Release 4.2(1)
    Cisco DPA Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008055cd53.html
    Hope this helps! Let me know if you need additional info.
    Rob

  • Integration with Cisco Call Manager?

    We have Cisco VOIP phones and we would like to continue managing calls with Cisco Call Manager.  We currently have voicemail on Cisco Unity.  We currently have Exchange 2010, but plan to start using Exchange 2013 soon.
    However, we would like to migrate voicemail service from Cisco Unity to Exchange Unified Messaging and also want to take advantage of most of the voicemail-related features of UM such as voice to text sent to email, voice mail waiting indicator light on
    the phones and sending voice mail audio attachments to email. 
    Is Exchange 2013 Unified Messaging compatible Cisco phones that are managed by Cisco Call Manager?
    We have 500 users and 2 Exchange 2010 servers (1 CAS and 1 Mailbox Server).  We now have a few Exchange 2013 licenses available in addition to our existing 2010 licenses that are already used on our existing 2 servers.  Can we keep the 2 existing
    Exchange 2010 servers as they are and create a new Unified Messaging server on  Exchange 2013 in the same environment or do we need to upgrade all the 2010 servers to 2013 if we use Unified Messaging on 2013?

    Hi Sachin,
    We do run a hybrid Callmanager to Nortel Meridian setup (works well).
    Here are some great docs;
    Cisco Unified CallManager
    Case Study: Nortel 61C PBX to Cisco IP Telephony Migration
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_white_paper09186a00801115e0.shtml
    Nortel Meridian PBX and Cisco CallManager Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008011888c.shtml
    Cisco Unified CallManager System Guide, Release 4.2(1)
    Cisco DPA Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008055cd53.html
    Hope this helps! Let me know if you need additional info.
    Rob

Maybe you are looking for

  • "My Music" app .. song name displayed in error

    Hi, I have a C1-01. I have stored some mp3s on the memory card, and I checked with an ID3 editor on my PC, they have their ID3 tags correct. But in the "My Music" app on the phone, when I go to "All Songs", many songs have their name displayed in err

  • Is this persitence necessary?

    How can caches be used for loading-from-tables and read-only-from-caches purpose? The existing environment is stated here under: Application1 updates the database tables (in the Message schema of Oracle 10g database) repeatedly and at the same time A

  • Unexpected behaviour dataTable

    Hi all! I'm currently creating a JSF application, using Mojarra 2.0.2, Spring DPI, ... . On a certain page, I notice that the value attribute of an h:dataTable tag gets evaluated although the rendered attribute of it's parent is set to false:        

  • How can I change KM property createdBy?

    Hi all, I have to change the property createdby for all resources within the KM. Background: In the past the display name in the portal was like "jdrogi". But this has changed and now all users look like "jdrogi @foobaa.com". Now it is the case that

  • Need HELP for MIDP application.

    i was having problems in row 45-70 and from row 88-105 which im not so sure weither i write it correctly or not. i wanted to do an application using MIDP where user can view question and chose the answer using List. The question can be get from datab