European calls from Spain

I am trying to utilize skype more for my business as I have horrendous mobile phone bills.  I have a rental company in Spain which attracts guests from Europe for their holidays, mainly, English, Spanish, French, German, Dutch and occasionally other nationalities.  During the booking process I have the occasional call but mainly correspondence is done over the internet.  When the guests are here and need to contact me they phone my movistar spanish mobile from their mobile which of course I get charged for picking up the call and when I need to contact them the rates are horrendous.  The most calls I would receive and make would be whilst the guests are here mainly from June to September. I need to know what the best package would be for me.  Any help would be so much appreciated.  Kind regards Kerry  

Hi ,
To get you set up I will send you a private message on here, with a link to our chat team.
If this is not showing go to your username click on the square box  and select Settings>> Preferences >> Private messaging.
Thanks.

Similar Messages

  • Calling from Spain with Online number

    I am thinking about getting an online number for the US, so that my friends can call me.  However, if I call them using my Spanish cell, will the number appear to them as my virtual number or my Spanish number?

    sabriniarogers wrote:
    I am thinking about getting an online number for the US, so that my friends can call me.  However, if I call them using my Spanish cell, will the number appear to them as my virtual number or my Spanish number?
    That depends.  If you use the Skype app on a mobile phone, and you have configured Skype to use a US Online Number as Caller ID when you call your friends, the US Online Number would appear on their phones.  If you use just the mobile phone with your Spanish mobile number to place the call, and not the Skype app, your Spanish number would appear on their phones (assuming you send that with your outgoing calls, and that information is passed over from your Spanish mobile network to the phones in the States). 
    When you purchase an Online Number, it is not automatically configured to be your Caller ID number when you call telephones from Skype.  You can set that up by logging into your Skype account using the "Account" link at the top of this web page once you have that number.  Go into the Caller ID settings, and select your US Online Number.  You won't have to go through any verification steps, but give it a few minutes for Skype's systems to update before you call telephones with that new setting.  Also make sure to log into the Skype program on a computer (not from a mobile phone or portable device like a tablet) and change the Privacy setting for Online Numbers to allow calls from anywhere.  Otherwise, your friends will encounter busy signals when they try to call that number.  It, like the Caller ID settings, are not automatically changed when you purchase an Online Number.
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Calling From AUSTRIA (other European country) to P...

    HI I need help.
    If I buy "Unlimited Europe" once, for one month, I can call from Austria to Poland? Is it gonna works?
    please answer. Thanks. 

    jaydenptrd wrote:
     Is it gonna works?
    Yes it is.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Calls from Indonesia to Australia

    Hi
    I have a skype unlimited international calls and skype to go AU number - but from what i have read i dont think it works if i'm calling from Indonesia to AUS or USA. Is this correct, and if so, If Ilargely want to be calling from Indonesia to the States or Oz that these two products are probably not worth it? If there is an alternative option, please advise. Thanks in advance

    Hotto wrote:
    Hi
     Is this correct,
    Hello and welcome to the Skype Community!
    No - it's not correct.
    Your account shows that you have a current Unlimited World Subscription.
    With your Unlimited World Subscription you can:
    Call LANDLINES AND CELLPHONES in: Canada, China, Guam, Hong Kong, Puerto Rico, Singapore, Thailand, United States.
    Call LANDLINES ONLY in: Andorra, Argentina, Australia, Austria, Belgium, Brazil, Brunei, Bulgaria, Chile, Colombia, Costa Rica, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Guadeloupe, Hungary, Iceland, Indonesia (Jakarta), Ireland, Republic of Ireland, Israel, Italy, Japan, Korea, Latvia, Lithuania, Luxembourg, Malaysia, Malta, Mexico, Morocco, Netherlands, New Zealand, Norway, Panama, Paraguay, Peru, Poland, Portugal, Romania, Russia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, United Kingdom, Venezuela.
    Subscriptions work from any country worldwide. Your location is totally irrelevant.
    I hope that this clarifies the situation for you .
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Calling from a different country.

    I have a samsung galaxy tap 10.1 with android 4.? I signed up skype in the UK. I'm now in Spain. If I call a UK mobile from Spain how much per minute payg / subscription.

    If he has a US/ Canada subscription it does not matter where you are the calls are free. if you do not have a subscription you have to have credit to call phones and landlines.
    If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
    Thank You!

  • Making calls from abroad

    Is there a way to activate calls from abroad when you have already left the country?

    Buying a bundle doesn't mean that your device will work aborad you need to make sure roaming is enabled on your account.
    If you have a EE extra plan you still need to make sure roaming is enable on your account your plan only gives you free/cheaper calls when abroad.
    If your wanting to enable roaming on your account there could be a deposit to pay if you haven't had the device for about 6 months.
    Unless you have paid the deposit then roaming is not enabled on your account.
    You need to activate roaming on your account by calling 150 from your device or from a landline 01707 315000 before you leave the UK.
    But you can still do this if you are abroad.
    If you have had the device/contract for 6 months or over you can login to your online account and turn on roaming yourself
    Manage this device>Usage controls>Roaming abroad - Allow and Call abroad and turn it on. If the option is not there you need to call
    It can take 24 hours to activate
    If you had this device/contract for under 6 months you need to call customer services on +44 7953 966250 from a landline.
    Once you have activated roaming you can then use this link to see what cost there is and what bundles you can have.
    http://explore.ee.co.uk/roaming/ee
    Please read this about voicemail
    http://ee.co.uk/help/getting-started/setting-up-voicemail/divert-to-voicemail
    And this
    http://ee.co.uk/articles/set-up-your-phone-for-using-abroad
    Also sending a text to 150 with the words of RO country your going to i.e. RO Spain will get you a reply of what the costs will be from that country.

  • Error while calling ejb service call from BPM service

    Hi,
    We are using the Oracle 11.1.1.5.0
    We are calling ejb service call from BPM service to update the data to Oracle database.
    We are getting the below error when we executing the ejb service call from BPM Service.
    <Error> <EJB> <BEA-010026> <Exception occurred du
    ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
    yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
    ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
    transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
    articipant in two-phase commit. To force this participation, set the GlobalTrans
    actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
    eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
    hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
    base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
    signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
    o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
    nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
    oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
    red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
    logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
    ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
    ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
    eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
    OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
    server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
    /activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
    oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
    mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
    WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
    nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
    eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
    ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
    OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
    rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
    gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
    Connection@EBSConnection_base_domain
    JDBC driver does not support XA, hence cannot be a participant in two-phase comm
    it. To force this participation, set the GlobalTransactionsProtocol attribute to
    LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
    = EBSConnection
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
    TransactionImpl.java:1881)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
    rverTransactionImpl.java:345)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
    sactionImpl.java:239)
    at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
    Object.java:622)
    at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
    y(BaseLocalObject.java:455)
    at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
    ionLocalMethodInvoker.java:52)
    at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
    LocalBeanImpl.handleCallback(Unknown Source)
    at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
    sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:140)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
    hTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
    k.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
    utor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:908)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
    nce cannot be a participant in two-phase commit. To force this participation, se
    t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
    or EmulateTwoPhaseCommit for the Data Source = EBSConnection
    at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
    a:83)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:1327)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:513)
    at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
    8)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    .>
    <12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
    0000> <failed to handle message
    javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
    be a participant in two-phase commit. To force this participation, set the Globa
    lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
    woPhaseCommit for the Data Source = EBSConnection
    at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
    a:83)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:1327)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:513)
    at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
    8)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    <12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
    0000> <Failed to handle dispatch message ... exception ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.
    message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
    itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
    driver does not support XA, hence cannot be a participant in two-phase commit.
    To force this participation, set the GlobalTransactionsProtocol attribute to Log
    gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
    SConnection
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.
    message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
    itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
    driver does not support XA, hence cannot be a participant in two-phase commit.
    To force this participation, set the GlobalTransactionsProtocol attribute to Log
    gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
    SConnection
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:207)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
    hTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
    k.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
    utor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:908)
    at java.lang.Thread.run(Thread.java:662)
    >
    Could any body help on this issue.It is little bit urgent for us to resolve.
    Thanks in advance.

    Thanks Sudipto Desmukh,
    The link is helpful me to resolve this issue.
    Thanks,
    Narasimha E

  • Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it som

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

  • Fields appear as "Read Only" in an Int.Form called from a WD

    Hi Experts!
    I am having a doubt in an Adobe Int.Form, that is called from a WD application.
    The fields that are in my Form, always appear as a "read only". It is not possible to modify anything there.
    Here, I describe the steps that I follow.
    I create a very simple WD application. In its WD View, exist an unique Object (Adobe Interactive Form).
    In that object, I set the properties:
    "Data source": a context variable type "my structure". "My structure", is a simple structure with a couple or three fields, let´s say PERNR, BUKRS, WERKS... It is linked to the Form Interface (ABAP DICTIONARY-BASED INTERFACE). So in this way, the link between my WD and the AdobeInt.Form is working.
    "PDF Source": a context variable type XSTRING.
    "Template Source": here I have set my Int.Form. Currently, it only contains a couple of fields
    "Enabled": True.
    "Read Only": False.
    In the AdobeForm, I have drag & droped those 2 or 3 fields, save it, and activate it. I guess nothing more is needed, for my test.
    And at last, in the View´s method WDDOINIT, I am reading one of those fields, let´s say the employee number (PERNR), and I set by hardcoding its number (let´s say -> 00000001).
    Until here, everything seems to work fine. When I launch the WD test, the Adobeform appears, at the moment, with only one of my fields (Employee - PERNR), and its value is filled in with '00000001'.
    But now, I would like to write something by myself. And when I try to do it, it is not possible! Field PERNR, is displayed as a "READ ONLY".
    Someone knows what is happening here? I guess it should be possible, to activate as a "EDITABLE" that field in my Form.
    So here is my doubt.
    Am I doing anything wrong? Or am I doing any mistake?
    Thank you very much in advance!

    Finally I think I have found the problem.
    In the View where I am printing the ADOBEFORM, it is needed this code under the method WDDOMODIFYVIEW.
    method WDDOMODIFYVIEW .
      DATA: LV_INTERACTIVE_FORM   TYPE REF TO CL_WD_INTERACTIVE_FORM,
                 LV_METHOD_HANDLER     TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
      LV_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INT_FORM' ). "   adobeform object in view
      IF LV_INTERACTIVE_FORM IS NOT INITIAL.
          LV_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
          LV_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( ABAP_TRUE ).
          LV_METHOD_HANDLER->SET_HIDE_NAVIGATION_PANEL( ABAP_TRUE ).
          LV_METHOD_HANDLER->SET_DISABLE_PRINT_BUTTON( ABAP_TRUE ).
          WD_THIS->M_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
          WD_THIS->M_METHOD_HANDLER->SET_HIDE_TOOLBARS( ABAP_TRUE ).
        ENDIF.
    endmethod.
    Regards,
    Carles

  • How displaying an alert message called from a database procedure

    Hi,
    How can I display an alert message that is called from a database procedure.
    I've tried the following code:
    l_al_button NUMBER;
    l_al_message VARCHAR2(80);
    l_al_id ALERT;
    Set_Alert_Property(l_al_id, alert_message_text,l_al_message);
    l_al_Button := show_alert(l_al_id);
    When trying I receive an error that says that the word ALERT need to be declared.
    Any suggestions?
    Thanks

    Hi,
    leave the procedure without error handling.
    This is what you can do:
    1.Inside the database procedure-
    BEGIN
    RAISE_APPLICATION_ERROR (-20001, 'The chosen length of the Public Key Exponent ....');
    END;
    2.Into your Form -
    BEGIN
    EXCEPTION
    WHEN OTHERS THEN
    IF sqlcode = '-20001' THEN
    Display Your Messages.
    END IF;
    Monica
    END;

  • Can include in time machine backup the content of an firewire hard disk attached to my mac? How? Thanks from spain!

    Apologyze my english.
    I hace a firewire disk attached to my mac with my iphoto files.
    How can I include this files into the time machine copy in my time capsule?
    Thanks from spain!

    If it's connected and turned on, and it's not in Time Machine's Exclude list, then it will be backed up. Normally, external drives are automatically excluded. To back them up you need to remove them from the Exclude list.

  • ON-LOGON does not fire in Form B, called from Form A

    We have a situation like this. We are using Forms (Forms [32 Bit] Version 10.1.2.0.2 (Production)).
    We migrated this application to Forms 11.2.0.1.0. Problem is that the ON-LOGON trigger does not fire in the 2nd level forms. Our application work like this.
    (a.) User double-clicks URL icon.
    (b.) Form A is opened without asking for un/pwd. We put a NULL; in the ON-LOGON of A.fmb.
    (c.) This is the main form of the application. This has a canvas with 6 buttons. Each button will launch it's own separate application with it's own menu.
    (d.) Now user presses button in A. This launches Form B. We use
    Run_Product(FORMS, 'B', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);              (e.) Now, in Form B, in the ON-LOGON trigger we have put code to show the logon screen and login to the DB.
    Problem is, this works in 10g Forms. But we had to replace the RUN_PRODUCT with a CALL_FORM after migrating to 11g since RUN_PRODUCT is not supported in 11g.
    Problem is that when you use CALL_FORM to call Form B, the ON-LOGON of the Form B does not fire. We tried OPEN_FORM and NEW_FORM with different parameters, but the behavior is the same. i.e. ON-LOGON does not fire.
    What is the solution or workaround for this please.
    Edited by: user12240205 on Oct 15, 2012 4:50 AM
    Edited by: user12240205 on Oct 15, 2012 4:52 AM

    Michael Ferrante (Oracle) wrote:
    If you need to open another form you should use CALL_FORM, OPEN_FORM, or NEW_FORM. In these cases, ON-LOGON will not automatically fire because the connect info is passed from the calling form. If you need to login from the called form then you need to need to programatically cause that to occur. Refer to the LOGON and LOGON_SCREEN built-ins in the Builder help for more info. You can fire these from almost any trigger you like, for example in a WHEN-NEW-FORM-INSTANCE trigger or where ever is appropriate for you application.Michael, we tried using the CALL_FORM, OPEN_FORM & NEW_FORM.
    Also, there is NO connection to the DB, when B is called from A since we don't login to the DB in A (ON-LOGON has NULL;).
    So, if there is no DB connection when B is called, shouldn't the ON-LOGON in B fire?
    We tried firing the LOGON_SCREEN and LOGON in the WHEN-NEW-FORM-INSTANCE. But, for some reason, the we don't get the menu (we get a menu not found error). We tried correcting the paths and other things but still no solution.

  • Unable to call from my skype out account

    Hi!
            Iam unable to call from my skype out account to india, but i can able to call skype to skype users.pls advice.otherwise pls advice how to cancel the membership and get my money back.
    Regards
    Rajan

    Contact your carrier.

  • How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

    How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
    I can not change my Apple ID to the old mail (not possible!)
    The old mail don't accept the new password..
    I can not delete the Icloud all the time asking my the password of the old mail!
    I realy need help

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

    I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

    Stop answering calls with blocked numbers. If it's someone who really wants to talk to you, they'll leave you a message and you can call them back.

Maybe you are looking for