Eurosport 2 HD recording isue

Today I set  recording of Eurosport HD for Alpine Skiing
Observation - :
EPG guide has (as of 12:20pm)
514 Eurosport 2 - Live Alpine Skiing (Junior slalom 2nd run) - programme is from 12:00pm to 1:00pm
but
522 Eurosport 2 HD  - Live Alpine Skiing (Junior slalom 2nd run) - programme is from 11:55am to 1:00pm
my recording set via ipad app was for the 522 Eurosport 2 HD channel -
The recording on the Youview box started at 12:00pm and ended at 12:03 ... a total of 3mins 39 seconds were recorded.
So we have a situation where the HD and SD channels have different EPG schedules.
So I  have a completed record ... which has a start and end time different to the EPG - which in reality is only a small portion of the actual program it should have recorded.
Recording was made on a DTRT2100 with software 17.3.0 
update as of 13:29  the EPG has changed again to show retrospectively 
522 Eurosport 2 HD  - Live Alpine Skiing (Junior slalom 2nd run) - programme is from 11:55am to 12:55pm.
At this point (13:29 The Eurosport 2 HD and Eurosport 2 (Sd) channels have a 5 minute difference in their schedules/timings for thw Welsh snooker.
A sepeate series record of V from the Sys Fy HD channel from 12:00 pm  - 1pm was completely recorded - so Youview box , Hub and IP TV service appear to have been fully functional.

I've heard there will be HD versions of the extra channels being added on the 26th along with the sky movie channels. But not sure how true that is.

Similar Messages

  • Recording from eurosport

    Trioed to do a recording the other day from eurosport and all looked well ,BUT  on playback later  it shrunk to the top left hand quarter of my screen making it impossible to watch , it was showjumping by the way   the previous week they had overlapped the previous programme  and cut the time of the programm down  so I missed the end  as there was no warning that this would happen  shame we dropped PDC systems in this country advances in technology eh so whats happening with eurosport ? any of the techicie bods know or would like to enlighten me ??????

    well strange as it may seem  it actually  reset itself to the normal screen ?????? ,now all I have to work out  is as to why a "timecode" is partly displayed at the top of the picture ? Picky me ???????

  • SAP ISU BP Contact - CRM Activity - CRM IC Interaction record

    Hi   All -
    I have a cookbook which talks about migrating SAP ISU BP Contacts into CRM Activity.
    Now, my question is if I do this, will this show up as a interaction record against the customer in the IC WebClient in CRM?
    We are considering a design where billing supervisors will enter a BP Contact in ISU when customers directly call them about a bill.  Later, if this customer calls the Cust Service Rep, we want this interaction to be visible to the CSR who will only use the CRM Webclient.
    So, I guess indirectly my question is,
    "Is a CRM Activity the same as an CRM WebClient Interaction record"?
    or
    "Is a CRM WebClient Interaction record a type of CRM Activity"?
    Thanks in advance for taking your time to answer this.
    Regards,
    Pradhip.S

    Hello Pradhip,
    the CRM IC Interaction Record is technically a CRM Activity with a certain transaction type. You can configure the replication of IS-U Contacts that the created activity is shown in the Interaction Center as Interaction Record. So you will be able to see the IS-U Contacts created in ERP - for example within a Front Office Process - in CRM as replicated Interaction Records.
    Kind regards,
    Christian

  • Eurosport fails to record for more than 2 1/2 hour...

    I have an intermitent problem with Eurosport recording and am wondering if anyone else has come across this.  Though the program appears to have recorded for the full duration, about two and half hours in it just stops and returns to the begining again.  Have rescanned for channels, had engineer out and no one seems to know what's happening.

    Hi tom33,
    Did you manage to get this sorted?
    Chris
    BT Mod Team.
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Replication of Interaction Record from CRM to ISU

    Hi All,
    We have a requirement to replicate the interaction record from CRM to ISU. Requirement is such that we have to keep the BP Contact number same as the object Id of the Interaction Record in CRM. Currently we are using CRM 5.2.
    Any suggestion.
    Regards,
    Manish

    I mentioned EMIGALL because that's the ISU migration workbench... and if there is a need to create BP contacts with external number range, that's definitely when transferring data from the legacy system into a brand new SAP system. So: as I don't have an ISU system available right now, may you please kindly check if migration object BCONTACT allows external numbering? If yes: you get your function module. If no: I guess that's because this is not supported by SAP.
    More information about EMIGALL can be found here:
    [Migration workbench cookbook|https://websmp208.sap-ag.de/~sapdownload/011000358700000500572009E/Guideline_ISMW.pdf]
    Regards,
    Nicolas Busson.

  • Create a BPEM Case and link to a ISU Contact Record

    Hi All -
    I have a question, We would like to create a FOP to do the following
    1. Create a BPEM case.
    2. Create a ISU Contact for the BP using the method ISUCONTACT-CREATEFROMDATA
    The question is can this method be used to attach the BPEM Case to the Contact Object? That is, will it establish a relationship in the BCONT_OBJ table?
    I want to  look up the BPEM case from the Contact.
    Regards,
    Pradhip.S

    You can definitely do that by adding the business object EMMACASE and object key to be your BPEM case number into the CONTACTOBJECTS/CONTACTOBJECTS_WITH_ROLE parameter of the method you are using.

  • SAP ISU Schedule Records creation

    Hi
    Experts,
    We are now approaching a phase in our project where we need to create NEW Schedule Records for coming years. SAP Default setting restricts upper limit for Schedule record creation as seven years but I know that we can over-ride that also.
    My question is that
    Does anyone has created schedule records in their project for more than seven years in one go & have you faced any problems.
    What is rationale behind SAP standard limit of seven Years or what sort of problems can be expected if we over-ride the SAP limit of Seven years.
    Thanks,
    Manish

    Hello satish
    Step 1:
    Create Framework Id( assign hidden & visible components)
    Step 2: Create CIC profile
    Step 3: create Org unit and assign person
    Step 4: Assign CIC profile to Org. unit (or) person
    Path : Easy access screen
              Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
    In this screen on the top i.e menu bar find Go To
    Go To>detail Object>Enchanced object description
    Now u r in Maintain object page(T code-PP01)
    Now in the Active tab page select CIC profile
    Now in menu bar Edit>create infotype
    Again u r in new page(T code-PP01)
    Enter the CIC profile Id which u have created in customizing
    Run T code- CIC0
    I hope u r able to see the screen now
    Rgds
    Madhusudhan

  • Isue of Free Goods

    Dear All
    I have created a Scenario of Free gods [Exclusiove]for all Customer in 1:1 ratio .Its running fine but there is one requirement that if 10 product of fre goods are avaqilable ion Stock but 6 product of main item are only available.the system will only make one check and allwing to create a order of 10:10 but delivery is hapening in 6:10 but ideally It should happen 10:10.
    Plz suggest me in thaT issue.
    My concern is that is there any way out so that system willl allow to create sales orde ronly  if order quantity=Confirmed quantioty in scedule line
    Plz suggest me in this isue.

    Dear All Team Member
    I have reached to one conclusion so far that if we insert one more option in Delivery control in condition record of Free Goods in VBN1 as delivery only takes place if main item=sub items,then our purpus will be resolved.
    Can you plz check out and provide me some suggestion how WE will resolve this issue?
    Many Thanks
    Rakesh Naveen

  • How to find total number of records in a BDoc?

    Dear all,
    I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
    Please help and points will be rewards!!
    Thank You
    Best Regards,
    CK

    I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
    Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
    SQL> create table emp_crap as select * from emp where 1 = 2;
    Table created.
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
      6     loop
      7        if v_cnt = 0 then
      8           v_cnt := rec.rn;
      9        end if;
    10     end loop;
    11     if v_cnt = 0 then
    12        raise zero_rows;
    13     end if;
    14   exception
    15    when zero_rows then
    16      dbms_output.put_line('No rows');
    17   end;
    18  /
    No rows
    PL/SQL procedure successfully completed.
    -- Now, let us use the table, which has the data
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from
      6          (select rownum rn, e.ename from emp e)
      7          order by 1 desc)
      8     loop
      9        if v_cnt = 0 then
    10           v_cnt := rec.rn;
    11           dbms_output.put_line(v_cnt);
    12        end if;
    13     end loop;
    14     if v_cnt = 0 then
    15        raise zero_rows;
    16     end if;
    17   exception
    18    when zero_rows then
    19      dbms_output.put_line('No rows');
    20   end;
    21  /
    14
    PL/SQL procedure successfully completed.Thx,
    Sri

  • SAP ISU EMIGALL DISC_DOC IMPORT ERROR

    Hi,
    I am trying to import a converted file with 234 records of DISC_DOC objects with SAP ISU EMIGALL app. I am getting this error:
         Short text                                                                      
                   The current application triggered a termination with a short dump.                                                            
         What happened?                                                                      
                   The current application program detected a situation which really                                                            
                   should not occur. Therefore, a termination with a short dump was                                                            
                   triggered on purpose by the key word MESSAGE (type X).                                                            
         What can you do?          
                   Note down which actions and inputs caused the error.
                   To process the problem further, contact you SAP system
                   administrator.
                   Using Transaction ST22 for ABAP Dump Analysis, you can look
                   at and manage termination messages, and you can also
                   keep them for a long time.
         Error analysis          
                   Short text of error message:
                   Processing canceled
                   Long text of error message:
                   Technical information about the message:
                   Message class....... "EH"
                   Number.............. 000
                   Variable 1.......... " "
                   Variable 2.......... " "
                   Variable 3.......... " "
                   Variable 4.......... " "
         How to correct the error          
                   Probably the only way to eliminate the error is to correct the program.
                   If the error occures in a non-modified SAP program, you may be able to
                   find an interim solution in an SAP Note.
                   If you have access to SAP Notes, carry out a search with the following
                   keywords:
                   MESSAGE_TYPE_X " "
                   SAPLES34ALLG or "LES34ALLGU04"
                   ISU_DISCDOC_OBJECT_GET
                   If you cannot solve the problem yourself and want to send an error
                   notification to SAP, include the following information:
                   1. The description of the current problem (short dump)
                      To save the description, choose "System->List->Save->Local File
                   (Unconverted)".
                   2. Corresponding system log
                      Display the system log by calling transaction SM21.
                      Restrict the time interval to 10 minutes before and five minutes
                   after the short dump. Then choose "System->List->Save->Local File
                   (Unconverted)".
                   3. If the problem occurs in a problem of your own or a modified SAP
                   program: The source code of the program
                      In the editor, choose "Utilities->More
                   Utilities->Upload/Download->Download".
                   4. Details about the conditions under which the error occurred or which
                   actions and input led to the error.
         System environment          
                   SAP-Release 700
                   Application server... "sapec1"
                   Network address...... "10.170.7.71"
                   Operating system..... "HP-UX"
                   Release.............. "B.11.31"
                   Hardware type........ "ia64"
                   Character length.... 16 Bits
                   Pointer length....... 64 Bits
                   Work process number.. 8
                   Shortdump setting.... "full"
                   Database server... "cnvhpx01"
                   Database type..... "ORACLE"
                   Database name..... "EC1"
                   Database user ID.. "SAPSR3"
                   Char.set.... "C"
                   SAP kernel....... 700
                   created (date)... "Oct 22 2007 23:34:45"
                   create on........ "HP-UX B.11.23 U ia64"
                   Database version. "OCI_102 (10.2.0.1.0) "
                   Patch level. 133
                   Patch text.. " "
                   Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
                   SAP database version. 700
                   Operating system..... "HP-UX B.11"
                   Memory consumption
                   Roll.... 16192
                   EM...... 8379680
                   Heap.... 0
                   Page.... 57344
                   MM Used. 3152352
                   MM Free. 1034864
         User and Transaction          
                   Client.............. 230
                   User................ "ANGHELC"
                   Language Key........ "E"
                   Transaction......... " "
                   Transactions ID..... "48B591833C495D0CE10000000AAA0747"
                   Program............. "SAPLES34ALLG"
                   Screen.............. "SAPMSSY0 1000"
                   Screen Line......... 6
                   Information on caller of Remote Function Call (RFC):
                   System.............. "EC1"
                   Database Release.... 700
                   Kernel Release...... 700
                   Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
                   Call Type........... "synchron and non-transactional (emode 0, imode 1)"
                   Inbound TID.........." "
                   Inbound Queue Name..." "
                   Outbound TID........." "
                   Outbound Queue Name.." "
                   Client.............. 230
                   User................ "ANGHELC"
                   Transaction......... "EMIGIMP"
                   Call Program........."SAPMEMIG_IMPORT"
                   Function Module..... "ISU_M_REPORT_SUBMIT"
                   Call Destination.... "sapec1_EC1_23"
                   Source Server....... "sapec1_EC1_23"
                   Source IP Address... "10.170.7.71"
                   Additional information on RFC logon:
                   Trusted Relationship " "
                   Logon Return Code... 0
                   Trusted Return Code. 0
                   Note: For releases < 4.0, information on the RFC caller are often
                   only partially available.
         Information on where terminated          
                   Termination occurred in the ABAP program "SAPLES34ALLG" - in
                    "ISU_DISCDOC_OBJECT_GET".
                   The main program was "RE3TR_EGD01_DCD ".
                   In the source code you have the termination point in line 17
                   of the (Include) program "LES34ALLGU04".
         Source Code Extract               
         Line               SourceCde
         1               FUNCTION ISU_DISCDOC_OBJECT_GET.
         2               *"----
         3               ""Lokale Schnittstelle:
         4               *"  IMPORTING
         5               *"     REFERENCE(X_HANDLE) LIKE  EBAGEN-HANDLE
         6               *"  EXPORTING
         7               *"     REFERENCE(Y_OBJ) TYPE  ISU05_DISCDOC_INTERNAL
         8               *"----
         9               
         10               * read line of objectss's table
         11                 read table iobj into y_obj          
         12                                 with key handle = x_handle          
         13                                 binary search.          
         14                 if sy-subrc <> 0.          
         15               *   invalid handle          
         16               *    message...          
         >>>>>                   message x000(eh).          
         18                 endif.          
         19               ENDFUNCTION.          
         Contents of system fields                         
         Name                         Val.
         SY-SUBRC                         4
         SY-INDEX                         20
         SY-TABIX                         1
         SY-DBCNT                         8
         SY-FDPOS                         2
         SY-LSIND                         0
         SY-PAGNO                         0
         SY-LINNO                         1
         SY-COLNO                         1
         SY-PFKEY                         
         SY-UCOMM                         
         SY-TITLE                         Generated program for migration object DISC_DOC
         SY-MSGTY                         X
         SY-MSGID                         EH
         SY-MSGNO                         0
         SY-MSGV1                         
         SY-MSGV2                                                                                                                                            
         SY-MSGV3                                                                                                                                            
         SY-MSGV4                                                                                                                                            
         SY-MODNO                         0                                                                                                                   
         SY-DATUM                         20080827                                                                                                                   
         SY-UZEIT                         115457                                                                                                                   
         SY-XPROG                         SAPLSYST                                                                                                                   
         SY-XFORM                         SYSTEM_HOOK_OPEN_DATASET                                                                                                                   
         Active Calls/Events                                                                                                                                            
         No.               Ty.                              Program                                                            Include                                   Line
                        Name                                                                                                                             
         5               FUNCTION                              SAPLES34ALLG                                                            LES34ALLGU04                                   17
                        ISU_DISCDOC_OBJECT_GET                                                                                                                             
         4               FUNCTION                              SAPLES34                                                            LES34U10                                   21
                        ISU_O_DISCDOC_ACTION                                                                                                                             
         3               FUNCTION                              SAPLEC85                                                            LEC85U02                                   103
                        ISU_S_DISCDOC_CREATE                                                                                                                             
         2               FUNCTION                              SAPLISU_M_DISCONNECTION                                                            LISU_M_DISCONNECTIONU01                                   221
                        ISU_M_DISCON_DOCUMENT_CREATE                                                                                                                             
         1               EVENT                              RE3TR_EGD01_DCD                                                            RE3TR_EGD01_DCD                                   199
                        START-OF-SELECTION                                                                                                                             
         Chosen variables                                                                                                                                            
         Name                                                                                                                                            
                   Val.                                                  
         No.               5                    Ty.                         FUNCTION
         Name               ISU_DISCDOC_OBJECT_GET                                             
         X_HANDLE                                                            
                   0                                                  
              0                                                       
              0                                                       
         Y_OBJ                                                                               
              0                                                       
              0                                                       
              2,22222E+93                                                       
              0                                                       
         WEDISCACT                                                            
                                  0000  0000000000000000                                     0000
              0     
              0     
              2,22222E+93     
              0     
         WEDISCPOS          
                                  0000000000000000000000  00
              0     
              0     
              2,22222E+44     
              0     
         CO_CORIV          
                   4
              0     
              0     
              33     
              4     
         IOBJ          
                   Table IT_673[1x7240]
                 \FUNCTION-POOL=ES34ALLG\DATA=IOBJ     
                 Table reference: 39     
                 TABH+  0(20) = C000000416A30E60000000000000000000000000     
                 TABH+ 20(20) = 00000027000002A10000000100001C48FFFFFFFF     
                 TABH+ 40(16) = 0400008900000A10000124C001800000     
                 store        = 0xC000000416A30E60     
                 ext1         = 0x0000000000000000     
                 shmId        = 0     (0x00000000)     
                 id           = 39    (0x00000027)     
                 label        = 673   (0x000002A1)     
                 fill         = 1     (0x00000001)     
                 leng         = 7240  (0x00001C48)     
                 loop         = -1    (0xFFFFFFFF)     
                 xtyp         = TYPE#000039
                 occu         = 1     (0x00000001)
                 access       = 1     (ItAccessStandard)
                 idxKind      = 0     (ItIndexNone)
                 uniKind      = 2     (ItUniqueNon)
                 keyKind      = 1     (default)
                 cmpMode      = 8     (cmpManyEq)
                 occu0        = 0
                 groupCntl    = 0
                 rfc          = 0
                 unShareable  = 0
                 mightBeShared = 0
                 sharedWithShmTab = 0
                 isShmLockId  = 0
                 gcKind       = 0
                 isUsed       = 1
                 isCtfyAble   = 1
                 >>>>> Shareable Table Header Data <<<<<
                 tabi         = 0xC000000416A69840
                 pgHook       = 0x0000000000000000
                 idxPtr       = 0x0000000000000000
                 shmTabhSet   = 0x0000000000000000
                 id           = 162   (0x000000A2)
                 refCount     = 0     (0x00000000)
                 tstRefCount  = 0     (0x00000000)
                 lineAdmin    = 1     (0x00000001)
                 lineAlloc    = 1     (0x00000001)
                 shmVersId    = 0     (0x00000000)
                 shmRefCount  = 1     (0x00000001)
                 >>>>> 1st level extension part <<<<<
                 regHook      = Not allocated
                 collHook     = Not allocated
                 ext2         = Not allocated     
                 >>>>> 2nd level extension part <<<<<     
                 tabhBack     = Not allocated     
                 delta_head   = Not allocated     
                 pb_func      = Not allocated     
                 pb_handle    = Not allocated

    hi,
    thanks.i have another doubt.
    In Initialization- Define -> sender system is Empty, but in receiver system it has the company name.where to set the sender machine.
    regards,
    vinodh

  • HOw to find out the RFC destination from BW system to ISU

    Hi,
    Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
    I am unable to find out the rfc destination from BW to ISU system.
    In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
    I need to compare the records stored in isu as well as in BW system.
    I need to call a function module which will provide me the data from isu.
    please help me in this regard.
    Krishna

    Hi,
    You can check it in SM59 if there are any RFC destinations for the above systems.
    Alternatively ,check the table RFCDEST if any entries are maintained
    Regards,
    Lakshman.

  • BW extraction settings for Billing  Data from SAP ISU SYSTEM

    Hi dudes,
    iam currently  extracting data from  sap isu  to  bw systesm,but even after  generation of many  billingmaster dats i  dnt  find nay record to  be extracted in bw system since some settings are missing in  isu suystem for extarction process of Biliiing  data,
    Kindy help me in this regarding the settings to  be made for succesful  extraction from isu  to  bw
    kr
    raj

    Dear Mr Memminger,
    unfortunatly I was not able to find any hint about the same issue. As we have closed the FI-key we are waiting for any entry in RSA7. With RSA3 we get results but there are no entries in Delta Queue.
    What I was surprised about is the fact that in SM58 there are some tRFC-entries for function module MEREP_DELTABO and target MAM_MI. That looks like error in delta handling. Although my colleague told me that is the integration to Mobile Asset Management and hence has nothing to do with the Delta handling problem.
    But could give me a hint where to find the configuration setting for Delta queueing ?
    Best regards,
    Peter von Schubert
    Edited by: Peter von Schubert on Jun 29, 2009 10:17 PM

  • ISU Contract Parner with no SD Customer in ECC

    Hi All
    We have a scenario where ISU Contract Partner was created without a corresponding SD reference customer when the data was migrate from legacy. EMIGALL created entries only in BUT000 table, but none in KNA1 and corresponding SD customer tables.
    We are now integrating ISU with CRM. As CRM initial download requires a sold-to-party in ECC, I wanted to know  the options we have for creating SD customer for each of the ISU contract partner record.
    Can any one please guide me ?
    Thanks in advance...
    Ram

    Follow this Procedure... it works....
    Procedure
    1. Review the number ranges that have been created: The number ranges for the business partner in the Best Practices are defined as follows:
    IMG u2192 Cross Application Components u2192 SAP Business Partner u2192 Business Partner u2192 Basic Settings u2192 Number Ranges and Groupings u2192 Define Number Ranges
    01: The Regular business partner uses this number range: 2100000000 to 2199999999 and 03: 7100000000 to 7199999999 is used in the setting above for the ship-to party. Both are internal number ranges.
    XX is the external number assignment used to create the SD reference customer.
    2. The account group DEBI must temporarily be assigned to this external number assignment for the creation of this business partner:
    IMG u2192 Financial Accounting u2192 Accounts Receivable and Accounts Payable u2192 Customer Accounts u2192 Master Data u2192 Preparations for creation customer master data u2192 Assign Number Ranges to Customer Account Groups:
    Set account group: DEBI to external number range XX for the Business Partner creation step.
    3. Create an SD customer:
    Call transaction XD01: Easy Access u2192 Logistics u2192 Sales and Distribution u2192 Master Data u2192 Business Partner u2192 Customer u2192 Create u2192 Complete
    u2022 Select account group: Customer (general)
    u2022 Enter the Customer key: MUST_ALL
    u2022 Enter company code (1000)
    u2022 Enter sales area as follows:
    u2022 Sales organization: 1000,
    u2022 Distribution channel: 01
    u2022 Division: 10.
    u2022 Select Continue.
    Assign MUST_ALL in Master data>bp>settings for creating standard customers.

  • Register and Device in ISU

    Experts,
    I see below info from F1 help about registers,
    Device that measures consumption, energy, etc.
    This can refer to an actual register or a display in an electronic device.
    If register is device that measures energy that why do we have a separate concept called device and device category in ISU. How are registers different from a device in ISU. I am learning the concepts of ISU being a fresher. Requesting you all to kindly guide me.
    BR,
    Aspire

    Aspire:
    A device can have registers (not all devices do) - registers record the readings.  A device belongs to a device category.
    For more information please read the Research Resources and Rules of Engagement and check the links for basic application help.
    regards,
    bill.

  • CRB Integration: CRM-ISU

    Since there seem to be a new post every day for basic setup of ISU integration with CRM, here is one thread which provides links to the documents in the service marketplace and elsewhere.
    Most of these documents are directly available at the Utilities page on the Service Marketplace https://service.sap.com/utilities
    Choose 'SAP for Utilities - Product Information' then 'SAP CRM for Utilities' and lastly click on 'Cookbooks & Guidelines' as shown below
    New 12-15-2013
    CRM for Utilities Overview
    https://service.sap.com/~sapidb/002007974700000213002013E/CRM_Utilities_2013.pdf
    New 03-27-2013
    WebClient UI Style Guidelines - great resource for understnading how to develop user interfaces in ICWC
    http://www.sapdesignguild.org/resources/uiguidelines.asp
    New 06-14-2012
    Best Practices - Setting Up a Best Run Interaction Center with SAP for Utilities
    https://service.sap.com/~sapdownload/011000358700000669512012E/SettingupaBestRunIC.pdf
    New - 05-14-2013
    The Utilities Check Cockpit
    This link only works for internal SAP folks, sorry.  https://service.sap.com/~sapdownload/011000358700001040272011E    
    Here is link for the help for the check cockpit. Utilities Check Cockpit - Functions for the Utilities Industry - SAP Library
    New - 11-14-2011
    Link: [Defining Products and Packages|https://service.sap.com/~sapdownload/011000358700001236052011E/Pakete_Definition_e.pdf]
    Link: [Selling products and packages|https://service.sap.com/~sapdownload/011000358700001235842011E/Pakete_Verkauf_e.pdf]
    Link: [Products and Product Packages|https://service.sap.com/~sapdownload/011000358700001424402010E/Final-Produktpakete_EN.pdf]
    Link: [Error handling with replication of contracts and TMD|https://service.sap.com/~sapdownload/011000358700004455162003E/Errorhandling_IS_U_CRM_e.pdf]
    Link: [Using ISU Master Data Templates|https://service.sap.com/~sapdownload/011000358700000623432005E/Cookbook_MDT_e_140507.pdf]
    Link: [ISU Setup Load Guide for Business Agreements/Contract Accounts|https://service.sap.com/~sapdownload/011000358700001088262009E/SDG_busagrmnt_contrtacc_e.pdf]
    Link: [ISU Setup Load Guide for BP relationships|https://service.sap.com/~sapdownload/011000358700000347572009E/SLG_GP_rel_Partner_roles_e.pdf]
    Link: [ISU specific Business Partner Load Setup|https://service.sap.com/~sapdownload/011000358700001064192007E/SLG_GP_ISU_V2.pdf]
    Link: [ISU-CRM Contract Integration - Contract Management|https://service.sap.com/~sapdownload/011000358700001143442009E/ContrIntegr_021009_e.pdf]
    Link: [ISU-CRM Marketing Integration|https://service.sap.com/~sapdownload/011000358700000503312010E/Cookbook_Marketing_2007_e2.pdf]
    Link: [Master Agreements in Sales Processing for C&I|https://service.sap.com/~sapdownload/011000358700000159352009E/Rahmenvertraege_CRM2007_e.pdf]
    Link: [Quotation Calculation in Sales Processing for C&I|https://service.sap.come/~sapdownload/011000358700000483592009E/Kalkulation_CRM70_Gesamt_e.pdf]
    Link: [Replication of BP Contacts to CRM Activities, Interaction Records|https://service.sap.com/~sapdownload/011000358700000646422009E/Replication_BP_Contacts.pdf]
    Link: [Replication of Technical Objects - Connection Object, Premise, Point of Delivery|https://service.sap.com/~sapdownload/011000358700001988852008E/TechnicalObjets_KW_261108.pdf]
    Link: [Archiving ISU/CRM Objects|https://service.sap.com/~sapdownload/011000358700000732942010E/Utilities_CRM_Archiving.pdf]
    Link: [Utilities Process Framework|https://service.sap.com/~sapdownload/011000358700001113322009E/Utilities_Prozess_FW_en.pdf]
    Link: [Replication of ISU Price data|https://service.sap.com/~sapdownload/011000358700000042352009E/MDG_Preisreplikation_e.pdf]
    Link: [Usage of ISU Consumption Profiles|https://service.sap.com/~sapdownload/011000358700000065322009E/Profile_e_final.pdf]
    Link: [SAP Help - CRM with SAP for Utilities|http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm]
    Link: [Performance of Initial Download from ERP into CRM for ISU|https://service.sap.com/~sapdownload/011000358700000101082010E/Perf_Initial_Download.pdf]

    Hey Bill, thanks for the links.  Question - is the Utilities Check Cockpit available externally?  I try the link but receive an authorization issue using my new S-id
    I am trying the following link:
    https://service.sap.com/~sapdownload/011000358700001040272011E
    Thanks,
    James

Maybe you are looking for