Euto radio and radio on line fm will not give sound
euto radio and radio on line fm add ons do not give sound the e music has 1 station i like but the station comes in and out so i added 2 more add ons and they don't play sounds the functions seem to work find. i tested a auto sound for my email and that sound works so i am getting sound from 1 add on
That is a firmware issue - please update your phone with the nokia software updater and see if it fixes the problem.
Similar Messages
-
I
I bought a sim free phone from phones 4u and had a virgin SIM card put it in to phone now it's locked to Virgin. I want to cancel and change networks but they
will not give me an unlock code can you help, as Virgin will not help meYou did not buy an unlocked iPhone. Only Apple themselves sell unlocked iPhones in most countries. Your iPhone locked to the first carrier used. Only Virgin could authorize unlocking of your iPhone, and if they will not, there's nothing you can do. Sell the iPhone to someone who can use it with Virgin and buy a truly unlocked iPhone from Apple.
Regards. -
Drawing a curved line using the pen tool, dragging the text cursor over the line but will only give me a small area to write in, in-between a circle and a circle with a cross in?
If you change your tool to the "Direct Selection Tool" (A) then you should be able to adjust the area for you to type in...
-
An Album (CD) that I have successfully imported into iTunes, and synced with my iPod, will NOT sync with my iPad, even though I have done everything I know how to do so. When viewing the music in "On This iPad" mode, I can actually see the album there, but it is grayed out, and in the left hand column there is a circle with dotted lines, as if it is an incomplete download--which in essence it is. But I have the album (CD) in my iTunes and on my iPod, just like hundreds of other CD's--what's up with this one?
Another characteristic is that since trying to import this CD into my iPad, I cannot get a successful sync of the iPad now; the syncing process hangs up in "Waiting for changes to be applied" for 3 or 4 minutes, and then it just stops. No message that "The syncing process is complete. Please eject before disconnecting." The sync just quits on its own, so I take it that the syncing process was unsuccessful.
Now what?
Message was edited by: PadretimoteoMake sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem. -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
How do I disable firefox off line it will not let me connect to the web
how do I disable firefox off line, it will not let me connect to the web
Go into settings and reset all network connections. Then restart your device by holding the power and home button until the Apple logo appears. You will not lose any data. When the device restarts connect to your wireless network.
-
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?
Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.
If you were instructed to call them, then that's what you should do. They will probably need to verify your identity before helping you with the security question.
-
my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there???????????
there has to be a completley FREE software out on the whole internet downloads to fix my ipod touch musics completely free no money involved
please help me to fix this i jave all of my 6 thousand plus music with some videos back onto my ipod touch this happened to me this year well a week ago or two last year and also the years before to with or without any backups but i have my other software for that saved all of my stuff thank gosh but now nothings playing so i love itunes its the best but when it doesn't play or find my lots of songs makes me mad sometimes but anyways thanks for any or all the help you can to fix this problem
THANKS AGAIN:-):-)my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there???????????
there has to be a completley FREE software out on the whole internet downloads to fix my ipod touch musics completely free no money involved
please help me to fix this i jave all of my 6 thousand plus music with some videos back onto my ipod touch this happened to me this year well a week ago or two last year and also the years before to with or without any backups but i have my other software for that saved all of my stuff thank gosh but now nothings playing so i love itunes its the best but when it doesn't play or find my lots of songs makes me mad sometimes but anyways thanks for any or all the help you can to fix this problem
THANKS AGAIN:-):-) -
I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.
Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I purchased an album on iTunes on my computer, and one of the songs will not play. Itunes says that I need to authorize my computer to play it, but it is authorized. What do i do?
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
Can anyone please help?Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy -
IPAD2 with HP APP and connected to local network will not print?
IPAD2@ and Netgear and Photosmart plus B210a.
Will not print e-mail on Safari?Hello HarryE,
What model of Netgear do you have? Have you ever been able to print from your IPad 2? You can try to unplug the router, then the printer and then turn off your ipad 2, then restart the router and when all the lights are back on, turn on the printer, then turn your ipad 2 back on, and then try printing again. Reply back if you still have issues!!
http://support.apple.com/kb/ht4356
I am a HP employee.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Maybe you are looking for
-
What is the best back up solution for me?
I have a Macbook Pro I use for music and photos only. What would be the best way to back up my media and free up space? Thanks.
-
Update records in table control BDC
I am using BDC on table control in which I have to scroll the table. The table shows 4 rows by default. I want to enter values for the 1st and 6th row. I use =p+ OK code to scroll. When enter value for 6th row the value in the first row vanishes. Ple
-
We have a script for InDesign CS5,4,3,2, and CS that preps, flightchecks and outputs a PDF file for customer submission. When the customer uses an ".ai" (illustrator) file or outputs an illustrator ".eps" file and uses it on the page, the script fail
-
How do I download adobe CC Bridge ?
How do I download adobe CC Bridge ?
-
How can I Import *.Mov video files into LightRoom 5.3 ?
I am having trouble trying to Import *.Mov video files into LightRoom 5.3. It imports preview thumbnails but when I select 'Import ' it now stops and displays an error message.