Eval Version Expired - SCOM2012 with SP1

Runing scom2012 with sp1. Received alerts that my eval is expiring and then it expired on me. cannot open the SCOM Admin Console or the reporting console .. all tell me the version is expired.
I am using thsi site http://support.microsoft.com/kb/2699998/en-us
Step3: New-SCOMManagementGroupConnection
When I run the above command with my group name at the end I get the error ...
ew-SCOMManagementGroupConnection : No such host is known
t line:1 char:1
New-SCOMManagementGroupConnection marscom
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.Syste...nnectionCommand:NewSCManagementGroupConnectionCommand
) [New-SCManagementGroupConnection], SocketException
+ FullyQualifiedErrorId : ExecutionError,Microsoft.SystemCenter.Core.Commands.NewSCManagementGroupConnectionComman
thanks in adv for yuour help.

Add information to Roger’s reply, after changing the date on the Management Server, restart the System Center Data Access service and rerun the cmdlet New-SCOMManagementGroupConnection.
Niki Han
TechNet Community Support

Similar Messages

Blue screen of death with LV7.0 Eval version

I had been programming for a couple weeks with no problems, trying to see whether or not Labview could handle the data acquisition requirements that we need for our software. Specifically, I was a little concerned that LV maybe be too "high level" to run fast enough for us. We're acquiring 2 analog voltage signals and an edge counter for X, Y and Z position values and streaming them into an intensity graph to get a picture of our scanned object. I had been using the DAQ Assistant VI to do the acquisition, which understably contains quite a bit of overhead, but the acquisition rate seemed to be okay (around 400Hz while streaming points into a 200x200 array on a DAQCard-6036E). I wasn't quite done the interpolation routine though and was afraid that would slow it down some more.
On Monday I got my first BSOD just a couple seconds after starting my program after using the software for hours. I brushed it off as a fluke and rebooted. Yesterday late in the afternoon I got another one after working on it and testing all day, but this time it never dumped the physical memory (it just hung). Much more concerning, I got a third one today upon just loading up Labview and trying to run my program for the first time. I took down the error message as:
IRQL_NOT_LESS_THAN_OR_EQUAL
STOP:0X000000A(0X6D665346,0X0000002,0X0000001,0X80519E8C)
I rebooted, and upon trying to load windows, I got a message that SYSTEM was corrupt. Our IT guy came by and rebooted again, which seemed to work alright. But then when he rebooted again we got -another- one with no "IRQL" statement. I did manage to get it going again by rebooting for a 3rd time.
What worries me is that this is getting progressively worse. For weeks I seemed to be able to tinker at will with the software and do all sorts of neat stuff and it didn't give me any errors. I haven't installed anything new this week at all, and suddenly it's crapping out faster and faster.
I'm using (or was, until I uninstalled everything for safety) LV Eval version installed on NI-DAQ 7.0 with a Toshiba TE2100 laptop (P4, 2GHz, 256meg). Are there any known issues with version 7.0? I had tried installing the Eval version (I guess it's really called "Express") on NI-DAQ 7.2, but the DAQ Assistant never showed up in the menu. After a few calls to NI tech support, I tried version 7.3 and it still wasn't there (and if you're new at LV, you NEED the DAQ Assistant), so I tried 7.0 and it worked fine.
I've attached my program. It's disorganized, yes, but it does the job. Any ideas?
Attachments:
jan19-5pm (interpolates up & down).vi ‏585 KB

Hi Tyler,
I'm using WinXP Pro, and I haven't tried the program on another computer yet. The tricky thing is that it's one of those intermittent problems. So I could install it on someone else's computer and have it run fine for weeks, then crash on the last day. The BSOD did not identify any particular problem file, only the IRQ error and that it was dumping physical memory. I know they sometimes give you the exact file that the problem occurred in, but not in my case.
I did a fair amount of searching through this forum and in general regarding Labview and conflicts with other software. I found one message from a couple years ago on another forum regarding BSOD's, and one reply asked "You're not using Sophos virus checker, are you?". Coincidentally, this is the only thing that had been installed on my computer since installing Labview. However, it was installed about 2 weeks prior to the first BSOD. Something I forgot to mention was that my laptop was taking suspiciously long to boot up. I could type in my name and password and come back 5 minutes later and it would still be loading my desktop. It wasn't until I physically removed the DAQ card and then rebooted that I saw it return to normal. I then uninstalled all NI software and reinstalled everthing, this time going with the 7.3.1 drivers. On Friday I also disabled Sophos virus checker for one day. So far it's run error-free today (even with Sophos re-enabled), and my computer booted up normal speed even with the DAQ left in it over the weekend. However, for the first time, Labview crashed on me today (performed illegal operation... do you want to send error report to microsoft etc...).
I sure hope the problems I'm having aren't indicative of the normal operation of the software. It's been amazing to program with so far, and its unbelievably powerful, but if BSOD's and mysterious crashes are the norm, it's going to be worse than our current software (which in itself isn't very good).

Problems with Eval version of NLSBS

Hi All.
I just installed the Eval version of NLSBS.
All installation went OK.
Setting up eDir, Imanager and GW from Yast went OK.
Console One and Imanager seems to work fine.
Problam 1:
Red Carpet, when starting Red Carpet, and click connect to this system, I
get "Unable to connect to the daemon: 'No such file or directory'."
Problem 2:
When I connect to the standard homepage, I get different options to download
different clients and "Access e-mail from the Web" and so on.
WebAccess doesn't work (Yes, were in setup in Yast), and all 3 download says
file not found. (2 x install.bin and GroupWise.app.sit)
I searced the whole server (just in case they weren't copied to the right
directory), and they are nowhere to be found.
Found some RPM's, but not in the "download-area"
Anyone have the same problems??
I'll take the easiest answer. :)
Flemming Veggerby

If you can connect to wpdomain.db in ConsoleOne, just delete any objects
related to GW. You may need to delete /opt/novell/groupwise as well. Now
you may start to reinstall GW via YAST wizard. If you are famillar with
GW on Netware, you can also install it manually. It's pretty much the same
as you install one on Netware. I installed mine without YAST wizard.
By the way, I found you will have less issues if you follow this
order: installing eDir first, then GroupWsie, and lastly iManager. At
least it happened to me.
-JonQ
On Fri, 10 Jun 2005 15:02:49 +0000, Flemming Veggerby wrote:
> [email protected] wrote:
>
>>> Flemming Veggerby wrote:
>>>
>>> > Flemming Veggerby wrote:
>>> >
>>> >> Hi All.
>>> >>
>>> >> I just installed the Eval version of NLSBS.
>>> >> All installation went OK.
>>> >> Setting up eDir, Imanager and GW from Yast went OK.
>>> >> Console One and Imanager seems to work fine.
>>> >>
>>> >> Problam 1:
>>> >> Red Carpet, when starting Red Carpet, and click connect to this
>> system, I
>>> >> get "Unable to connect to the daemon: 'No such file or directory'."
>>> >>
>>> >> Problem 2:
>>> >> When I connect to the standard homepage, I get different options to
>>> >> download different clients and "Access e-mail from the Web" and so
>> on.
>>> >> WebAccess doesn't work (Yes, were in setup in Yast), and all 3
>> download
>>> >> says file not found. (2 x install.bin and GroupWise.app.sit)
>>> >> I searced the whole server (just in case they weren't copied to the
>> right
>>> >> directory), and they are nowhere to be found.
>>> >> Found some RPM's, but not in the "download-area"
>>> >>
>>> >> Anyone have the same problems??
>>> >> I'll take the easiest answer. :)
>>> >>
>>> >> Flemming Veggerby
>>> >
>>> > AND.............
>>> >
>>> > In Console One, the container "GroupWise System" is empty, but in the
>>> > tree/context I can find all GroupWise objects, but can only wiev
>>> > properties on Messenger.
>>> > All others give this error:
>>> > "The folowing GroupWise domain databasefile cannot be accessed
>> properly.
>>> > /opt/novell/groupwise/db/gwdom"
>>> >
>>> > If I try to connect to the wpdomain.db I get:
>>> > "Error opening GroupWise domain database file"
>>>
>>> Solved the problem with the missing download files.
>>> I configured Groupwise again from Yast, and now they can be
>>> downloaded.???????
>>> But the alias gw is still not created in httpd.conf, any Groupwise web
>>> doesn't work
>>
>> Just been slapping my forehead for a couple of minutes...............
>>
>> If I login as root (NOT admin), many things works a lot better. :)
>> Now I only meed to get the GW web things to work.
>> Updating now, then I hope everything works.
>>
>> Flemming Veggerby
>
> After update, reboot, reconfig and others:
>
> No GwAccess, no http://address/gw
>
> AND members in GW POA has disappeared, and I can't add users without getting
> errors.
>
> This is my last problems, appearantly, I hope. :)
>
> Flemming

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error

Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.log

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

SharePoint 2013 Enterprise with SP1 on Windows Server 2012??????? What am I missing?

Hi there,
As per MS - SharePoint 2013 Enterprise SP1 is compatible with Windows Server 2012 R2.
I have Windows Server 2012 R2 installed - now it does not let me install SharePoint 2013 Enterprise (Standard without SP1).
AND SP1 can ONLY be installed AFTER SharePoint 2013 Enterprise is installed.
So how to install SharePoint 2013 Enterprise with SP1 on Windows Server 2012?
Thanks.

You can download it at the Microsoft Volume Licensing Service Center:
https://www.microsoft.com/Licensing/servicecenter/default.aspx
or at the Microsoft Developer Network:
http://msdn.microsoft.com/
Please note that if you do not have access to either, you will have to work with the vendor who sold you SharePoint 2013 to get you a new ISO with SP1, or you will have to find a way to make a slipstreamed version on your own. I'm really hoping you
have VLSC or MSDN access, as this will make things much easier for you.

Where is bin direcotry in eval version of WLS 6.1 sp 4

I just downloaded a copy of the eval version of WLS 6.1 sp 4 because I want
to use it with the WebLogic Server 6.1 Workbook. However, when I install it,
the bin directory is missing. I am also interested in looking into
clustering with iis. Without the bin directory, I don't have the
iisproxy.dll file. Can I use the one from version 6.0 instead? Thanks.

I just downloaded a copy of the eval version of WLS 6.1 sp 4 because I want
to use it with the WebLogic Server 6.1 Workbook. However, when I install it,
the bin directory is missing. I am also interested in looking into
clustering with iis. Without the bin directory, I don't have the
iisproxy.dll file. Can I use the one from version 6.0 instead? Thanks.

Which version of Windows XP (SP1, SP2, SP3?) can I install on Mac Pro 2011 using Boot camp

I am planning to install Microsoft XP on my Mac Pro 2011 using boot-camp. Since there are multiple versions available (Home, Professional, Pro with SP1, SP2, and SP3's etc…) I am finding hard to decide which one is the tested and best available option?
Also any other specific features to consider while purchasing this OS.
Please advise…

Gurleen80 wrote:
Thank you guys for your quick response.
However, I am not clear what you guys wanna say here, I simply want to know Which windows XP can I install on Macbook Pro (Laptop) using boot camp?
I will repeat what I already said given that you told us that you are running Lion on a newer MacBook Pro.
You should visit the Boot Camp forum https://discussions.apple.com/community/windows_software/boot_camp
And you should read the Boot Camp Help documents http://www.apple.com/support/bootcamp/
XP, regardless of version, is not going to work on a newer computer nor will it work if you are running Lion OS.

Boot Camp, VIsta with SP1 x64 clean installed. Please help!

I clean-installed Vista Ultimate 64bit with SP1 (SP1 comes with Vista, not a separate download) on the latest macbook. As expected Boot Camp Application doesn't work (it doesn't even install).
1.I want to use the function keys (F1, F2, etc) for brightness and volume, which installation program should I run from the Leopard disk? I don't think I can find this "driver" online.
2.How can I get bluetooth on my macbook working? Which installation program should I run from the Leopard disk?
3.iSight camera. Is there a driver for iSight camera in 64bit Vista?
I see there's a "x64" folder in Leopard disk, under folder "drivers". Should I install everything in this folder? I haven't tried yet.
Thanks for help!

Hi Bjorne,
how did you manage to do a clean-install of Windows Vista with SP1 from a slipstreamed media? If I start my Macbook with the Vista SP1 DVD while holding down the "C" key, I will only see the following message:
1.
2.
Select CD-ROM Boot Type:
I can't go on any further, because hitting any key won't work.
The problem seems to the EFI bootloader on the Vista SP1 DVD which is compiled for 64-bit EFI environments (U-EFI 2.0)! The EFI environment used in Apple computers is based on version 1.10 and runs in 32-bit mode. I've found this information on the rEFIt homepage http://refit.sourceforge.net/info/vista.html and I've also found the homepage http://www.jowie.com/post/2008/02/Select-CD-ROM-Boot-Type--prompt-while-trying-t o-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx from Jowie who has the same problems. He has found out how to make the Vista SP1 DVD booting on an Apple computer by modifying the DVD image which seems to kill the EFI bootloader...
How did you manage to boot from an unmodified Vista SP1 DVD image?
Greetings,
OllieW

OSD with SP1 CU1 captured Win7 failed to deploy after R2 CU1 Update

Hi guys,
quick question. We currently trying to deploy an Image as i said in the title. The Win7 has been captured with SP1 CU1 an we tried to install the R2 Client during OSD TS. This steps seems is the last that is executed in the TS after that, the TS Fails
with error: "Failed to create instance for IMTCTokenHandler interface, hr=0x8007005". Any suggestions ??
Thanks guys....

In our case it is something related to the WinPE. If we use the version 5.0 (6.3.9600.16384) shipped with R2 the task sequence continues normally. If we change it back to the version 4.0 (6.2.9200.16384) the TS dies with the error from above. Here are some
more detailed log entries:
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="22:03:17.580-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="osdsetuphook.cpp:186">
<![LOG[Logging successfully initialized to C:\_SMSTaskSequence\Logs]LOG]!><time="22:03:17.612-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="osdsetuphook.cpp:187">
<![LOG[Executing task sequence]LOG]!><time="22:03:17.612-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="22:03:17.627-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="22:03:17.627-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="22:03:17.627-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="environmentscope.cpp:659">
<![LOG[Saving existing desktop wallpaper settings.]LOG]!><time="22:03:18.299-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="wallpaperselector.cpp:36">
<![LOG[Setting desktop wallpaper.]LOG]!><time="22:03:18.315-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="wallpaperselector.cpp:57">
<![LOG[Debug shell is enabled]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="basesetuphook.cpp:1440">
<![LOG[Spawning system message loop thread.]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="debugwindow.cpp:143">
<![LOG[Waiting for system message loop to initialize.]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="debugwindow.cpp:152">
<![LOG[Signaling initialized event.]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2912" file="debugwindow.cpp:182">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="basesetuphook.cpp:1462">
<![LOG[Enabling local administrator account]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="basesetuphook.cpp:1219">
<![LOG[Entering system message loop.]LOG]!><time="22:03:18.424-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2912" file="debugwindow.cpp:187">
<![LOG[Re-assign all drive letters...]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="diskutils.cpp:1941">
<![LOG[Partition without driver letter: ]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="diskutils.cpp:1948">
<![LOG[Partition with driver letter: 0-1;0-2]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="diskutils.cpp:1949">
<![LOG[Active partition is 0-1. New OS partition info: 0-2.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="diskutils.cpp:1950">
<![LOG[sPartitionNoDriveLetter.length() > 0, HRESULT=00000000 (e:\nts_sccm_release\sms\framework\tscore\diskutils.cpp,1951)]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="diskutils.cpp:1951">
<![LOG[The drive information which has no drive letter can not be found. No need to re-assign driver letters.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="diskutils.cpp:1951">
<![LOG[Installing SMS client]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="basesetuphook.cpp:1474">
<![LOG[Setting variable to indicate client installation attempted]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="installclient.cpp:934">
<![LOG[Clearing existing client configuration.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="installclient.cpp:291">
<![LOG[Cleaning existing client certificates from SMS certificate store]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="installclient.cpp:138">
<![LOG[Restoring SMS client identity.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="installclient.cpp:321">
<![LOG[The client certificates were not found in the environment. New certificates will be generated.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="installclient.cpp:355">
<![LOG[Successfully restored the client identity.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="installclient.cpp:359">
<![LOG[Using CRL: ]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="installclient.cpp:952">
<![LOG[Unable to read SMS client cert from environment. Not restoring SMS client cert.]LOG]!><time="22:03:18.440-120" date="05-03-2014" component="OSDSetupHook" context="" type="2" thread="2448" file="installclient.cpp:962">
<![LOG[Succeeded loading resource DLL 'C:\WINDOWS\system32\_SMSOSDSetup\1033\TSRES.DLL']LOG]!><time="22:03:18.503-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="util.cpp:963">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="22:03:18.534-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="commandline.cpp:228">
<![LOG[Set command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="22:03:18.534-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="commandline.cpp:731">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="22:03:18.534-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 3052 ]==========]LOG]!><time="22:03:18.659-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3060" file="winmain.cpp:330">
<![LOG[Command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="22:03:18.659-120" date="05-03-2014" component="TsProgressUI" context="" type="0" thread="3060" file="winmain.cpp:332">
<![LOG[Registering COM classes]LOG]!><time="22:03:18.659-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3060" file="winmain.cpp:187">
<![LOG[sbModulePath = C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe]LOG]!><time="22:03:18.659-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3060" file="tsprogressuiclass.cpp:625">
<![LOG[Unregistering class objects]LOG]!><time="22:03:18.690-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3060" file="winmain.cpp:495">
<![LOG[Shutdown complete.]LOG]!><time="22:03:18.690-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3060" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="22:03:18.690-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="commandline.cpp:1123">
<![LOG[Successfully registered TS Progress UI.]LOG]!><time="22:03:18.690-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="utils.cpp:2279">
<![LOG[Executing C:\_SMSTaskSequence\OSD\ABC003AE\ccmsetup.exe /useronly /source:C:\_SMSTaskSequence\OSD\ABC003AE /config:MobileClient.TCF /status:524]LOG]!><time="22:03:18.940-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448"
file="installclient.cpp:1084">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="22:03:18.940-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="commandline.cpp:228">
<![LOG[Set command line: "C:\_SMSTaskSequence\OSD\ABC003AE\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\ABC003AE /config:MobileClient.TCF /status:524]LOG]!><time="22:03:18.940-120" date="05-03-2014" component="OSDSetupHook" context="" type="0"
thread="2448" file="commandline.cpp:731">
<![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\ABC003AE\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\ABC003AE /config:MobileClient.TCF /status:524]LOG]!><time="22:03:18.940-120" date="05-03-2014" component="OSDSetupHook" context=""
type="1" thread="2448" file="commandline.cpp:827">
<![LOG[Process completed with exit code 0]LOG]!><time="22:04:18.052-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="commandline.cpp:1123">
<![LOG[Install succeeded. Blocking other instances of ccmsetup.]LOG]!><time="22:04:18.052-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="installclient.cpp:1097">
<![LOG[Installed Client]LOG]!><time="22:04:18.052-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="installclient.cpp:1155">
<![LOG[Start to cleanup TS policy]LOG]!><time="22:04:18.052-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:3055">
<![LOG[TS Deleted 0 instances]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:3098">
<![LOG[TS Policy cleanup done]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:3099">
<![LOG[End TS policy cleanup]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:3103">
<![LOG[Setting variable to indicate a client installation was done]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="installclient.cpp:1166">
<![LOG[Registering the task sequence with the execution manager in the newly installed operating system.]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="installclient.cpp:1170">
<![LOG[Active request handle is empty, registering with new active request handle. This is expected if the TS was started from a media/PXE.]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="2" thread="2448"
file="utils.cpp:4522">
<![LOG[Saving the new active request handle for the task sequence: {3980D086-B57D-41B4-AE8E-E25161557E62}]LOG]!><time="22:04:18.068-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="utils.cpp:4535">
<![LOG[Failed to create instance for IMTCTokenHandler interface, hr=0x80070005]LOG]!><time="22:04:18.099-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4552">
<![LOG[Waiting for ccmexec process to start]LOG]!><time="22:04:18.099-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4553">
<![LOG[Failed to create instance for IMTCTokenHandler interface, hr=0x80070005]LOG]!><time="22:04:23.226-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4552">
<![LOG[Waiting for ccmexec process to start]LOG]!><time="22:04:23.226-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4553">
<![LOG[Failed to create instance for IMTCTokenHandler interface, hr=0x80070005]LOG]!><time="22:04:28.259-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4552">
<![LOG[Waiting for ccmexec process to start]LOG]!><time="22:04:28.259-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4553">
<![LOG[CoCreateInstance succeeded]LOG]!><time="22:04:34.917-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="utils.cpp:4564">
<![LOG[Succesfully registered the tasksequence with the execution manager]LOG]!><time="22:04:35.324-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="utils.cpp:4597">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="22:04:36.339-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="commandline.cpp:228">
<![LOG[Set command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="22:04:36.339-120" date="05-03-2014" component="OSDSetupHook" context="" type="0" thread="2448" file="commandline.cpp:731">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="22:04:36.339-120" date="05-03-2014" component="OSDSetupHook" context="" type="1" thread="2448" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 3260 ]==========]LOG]!><time="22:04:36.527-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3552" file="winmain.cpp:330">
<![LOG[Unregistering COM classes]LOG]!><time="22:04:36.590-120" date="05-03-2014" component="TsProgressUI" context="" type="1" thread="3552" file="winmain.cpp:204">

Event Structure Components in Eval Version?

Does the Labview Eval Version include the Event Structure Components? If so, where are they located? If not, that is very lame. It is very difficult the experiment with functionality without them.

You get everything you possibly want with the evaluation version. As others have said, it's basically the professional version.
In addition, you can evaluate any toolkits and modules. (not sure if there are minor exceptions?)
Once you purchase a license, they license determines what you are allowed to use. The DVD is the same for all versions.
AFAIK, you can evaluate almost anything without jumping through any hoops. Even if you have an existing activated LabVIEW installation, you can later evaluate a toolkit or module with it.
LabVIEW Champion . Do more with less code and in less time .

After trial version expired and purchasing creative cloud membership programs still will not open

I keep getting "trial version expired" even though I have purchased the cloud membership around 3 weeks ago. I did the chat with someone who had me remove my cache, which did work for me to run Photoshop, but not for Dreamweaver. I installed a patch for the download manager that did not work as well. I have installed and uninstalled multiple times with no luck, and now have a project due Thursday!! Please help!!

I don't think these issues pertain to mine. There is something getting mixed up between my trail version (expired) and my new Creative Cloud subscription. Its like it can't see it for some reason. I was able to get Photoshop to work but Dreamweaver is being stubborn!! Please help my project is now due tomorrow... !! Thanks!
From: [email protected]
To: [email protected]
Subject: After trial version expired and purchasing creative cloud membership programs still will not open
    Re: After trial version expired and purchasing creative cloud membership programs still will not open
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5162797#5162797
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5162797#5162797
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5162797#5162797. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have the 6.1 eval will it work with ny acquition board

I have the 6.1 eval will it work with ny acquition board.

Hello;
Yes, just make sure to point to the DAQ board during the uinstallation of the evaluation version.
Regards
Filipe A.
Applications Engineer
National Instruments

Visual Studio 2005 with SP1 for Windows 7 - 64 bit

Hi,
I am trying to install Visual Studio 2005 on a 64-bit platform (Windows 7). The version in about section reads Version 8.0.50727.42
(RTM.050727-4200)
I need to install the Service Pack 1 for Visual Studio 2005 but the installer available is for 32 bit (VS80sp1-KB932232-X86-ENU.exe)
This does not install on 64 bit system.
How do I get Visual Studio 2005 with SP1 installed ?
P.S- On the network I work on, I can see a Windows 2008 (64 bit) system with the version of Visual Studio 2005 that reads Version
8.0.50727.762 (SP.050727-7600) but I dont know how that was installed. Any help would be
appreciated.
Thanks,
Wilson

Hello WillisB,
I think your concern is the name X86 here. Actually Visual Studio is x86 version and we do not have a x64 version Visual Studio. So if you install Visual Studio on X64 version, it is also available. And when you see this page
http://www.microsoft.com/en-hk/download/details.aspx?id=7524 You can see the system requirements:
Supported Operating System
Windows 7; Windows Server 2008; Windows Server 2008 R2; Windows Vista
Processor/RAM:
Vista hardware requirements.
Required Software: licensed copy of a Visual Studio 2005 and Visual Studio 2005 Service Pack 1.
So please don't mind the name x86, the update can still be installed on Win 7 x64.
By the way, to install Visual Studio 2005 on Win 7, please check YiChun's post on this thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/f75d8ff2-bed4-473b-bc9c-6faf78c5d83a/installing-visual-studio-2005-pro-on-windows-7-pro-64bit?forum=vssetup
"To apply Visual Studio 2005 on Windows 7, please check the following points step by step:
- Download Visual Studio 2005 SP1 and install it
Visual Studio® 2005 Express Editions Service Pack 1
Visual Studio® 2005 Service Pack 1 for Standard or above edition
- Download
Visual Studio 2005 Service Pack 1 Update for Windows Vista and install it
- When launch Visual Studio 2005, please run it with administrator privileges
(Right-click the icon >> "Run as Administrator")"
By the way, Visual Studio 2005 is out of our mainstream support, what about change to use some new version of VS? For example, Visual Studio 2013 Community version.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Does Weblogic has embedded database(not PointBase eval version)

I have developed an application that uses a database. Currently I deployed this on Websphere that has Cloudscape embedded database.
Now we are trying to deploy it on Weblogic. I want to know that does Weblogic provide any embedded database out-of-the-box. I know it comes with PointBase eval version to demonstrate its samples. But can we use/ship this eval version database for commercial product?
Regards,
Jitendra
Message was edited by:
jitendrakharche

Jitendra Kharche wrote:
I have developed an application that uses a database. Currently I deployed this on Websphere that has Cloudscape embedded database.
Now we are trying to deploy it on Weblogic. I want to know that does Weblogic provide any embedded database out-of-the-box. I know it comes with PointBase eval version to demonstrate its samples. But can we use/ship this eval version database for commercial product?
Regards,
Jitendra
Message was edited by:
jitendrakharchehttp://e-docs.bea.com/wls/docs81/faq/jdbc.html#504207
You can consider mysql...
Joe

Eval Version Expired - SCOM2012 with SP1

Similar Messages

Maybe you are looking for