Evaluate button in confirmation is active though the questionnaire sent

Dear SAP gurus,
We are using SRM server 550 with SP8 installed and we are in Extended Classic Scenario. We are using vendor evaluation functionality where we evaluate vendor accordingly when we create confirmation. However when we put the evaluation and save it we still see that the evaluate button is active. Why is that? I think one evaluation is enough for one confirmation document?
Best regards,
Yosea

Hi Yosea,
that is standard functionality. The button becomes active, when the evluation
function is configured and stays active. It enables several evaluations for e.g.
part delivery.
Cheers,
Claudia

Similar Messages

  • The confirmation of Activity

    The user need to use CN25 to process the confirmation of activity A.
    The confirmation is below:
                              Activity   Actual Start    Actual finish         Confirmation: Degree of processing  
    For the 1st  time.  A          20090301         20090307            30
    For the 2nd time.  A          20090309         20090312            20
    For the 3rd  time.  A          20090315         20090320            10
    For the 4th  time.  A          20090322         20090329            100
    For the 5th  time.  A          20090315         20090320            -10  (cancel 3)
    Now the status of Activity "A" still is "CNF".
    because the confirmaiton have some errors.
    how to customize to avoid to appear this errors.
    Please explain me all the steps to be required.
    Thanks in advance!

    I think you have done some kind of mistake while doing cancellation also...
    If we properly cancel all the confirmations for an activity then it will not be having CNF status.
    Regards.

  • LEAD is not determining the Questionnaire

    Hi,
    Guru's
    My Problem is that we have done all the customization in IMG even though the questionnaire is not triggered into the LEAD ---> Evaluation Tab ---> Drop down box.
    customization's are  as fallows
    -->Define Questionnaire
    -->Define Determination for Questionnaires
    -->Assign Qualification Levels to Questionnaires
    Activated the Questionnaire
    So, Where did I went wrong ?
    Is there any missing ?
    Can you guys give a solution.
    Regards
    CR Gupta

    Hi,
    Select Define determination for Questionnaires and check your Determination, whether the Item category is given, If so Remove the Item category and save the document.Check the questionnaires in Lead now.
    Regards,
    Selvam T

  • Evaluate button inactive during confirmation posting

    Hi Friends,
    I am working with SRM5.0.
    I have defined a survey and a questionniare for VE during confirmation.
    Have assigned a use group and a user with valid email address to the survey
    In define events for VE, I have made entries for transaction category "confirmation" and have selected "procedure" as "individual-sel. via button".
    I can call the questioonaire from SPRO using right click mouse button on user--> call questionnaire in WEB"
    Also required SICF services are active and I am able to perform VE on portal using Vendor List.
    With these settings, when I perform the VE for the specified product category, I am finding "Evaluate" button inactive during confirmation posting.
    Any hint for my issue? Pls suggest.
    Thanks
    Regards,
    Prashant

    Hi Prashant,
    1) In define events, trying keying in an "*" for vendor & P.Org, enter the source system as your SRM system. Did you assign the survey & questionnaire in this define events. Enter probability as 100. Then try to post a confirmation.
    2) Defining a user group is not mandatory. Hence, you may try to delete this & re-try if point no.1 does not work.
    Cheers,
    Akash

  • I am having trouble activating ICloud on a friend's device. It will not verify the email... Even though the AllpeID is correct. Help!

    I am having trouble activating the icloud on a friend's device. When I go to settings, it tells me it cannot verify the email even though the Apple ID and password are correct... Help!

    Try signing out of the ID, restart the iPad, sign in again and then try again.
    Settings>iTunes & App Stores>Apple ID>Tap the ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Material Confirmation date in future though the material is in stock

    Dear Gurus,
    Please tell me why the system is giving the material confirmation date in future though the matl is  available in stock.
    System creating two schedule lines one for 15/10 (15 oct) and the second one with the confirmation of quantity on 22/11 (22 Nov) as I have enough stock than the required for this order. In MRP1 view of same  matl Master of same material delivery planning time is 28 days. and in MRP3 view the Replenishment lead time is 20 days.  please tell me what date system considering to shift  the confirmation date in future. the factory calender has Sat-sunday off.
    please tell me the possible reasons for confirmation date change.
    regards,
    Sandesh

    Hi ,
    Please check the  value at MM03-> Sales: General plant Tab ->Availability Check is '02'.
    u201802u2019 will consider all the u2018Individual Requirementsu2019 done before and during the creation of Sales order for the combination of respective Material & Plant.
    Even though Material stock will be visible for you at MMBe for respective plant double click on the Quantity, it will show you multiple Row with one of it will be " On Order Stock" these are the other orders for which Quantity is already confirmed but respective PGI is not yet done.
    The next schedule line date always generated based on the Factory calendar (based on Holidays/Weekly Offs if any).
    AT MD04 Tcode, based on the selection made at Material master for Availability Check you could see all the requirements related to Goods Issue Sales Orders , STO & Production Orders for Goods receipts.
    Hope this will solve your query.
    With Best Regards,
    RB.

  • How to keep the save-button active all the time?

    Hi!
    I'm using mobile sales 4.0.
    On a tile i've only fixed questions and combo boxes with yes and no ...
    When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
    What are the settings i've to do to keep the save-button active all the time?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi Ingo,
    If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
    In the <b>combobox_OnValueChanged2</b> event, make a call to makeDirty method in the tile:
    If boundAttributeChanged Then
         <b>anchorthatyourcombotiedto</b>.bo.MakeDirty True
    End If
    This will make the Save button enabled.
    Regards, Vadim.

  • Workitem button is not comming in swel though the workflow gets triggered

    Dear All,
    I have copied the std wf WS20000075 and doing customization for po release as per my clients requirement. Once PO is being created in ME21N i am able to see the event trace in SWEL , but its showing an error , " Import container contains errors (are any obligatory elements missing? " .and no workitem button is comming in SWEL so that i am not able to see the workflow log .
    so that though the workflow gets triggered , i am not able to trace it .
    I have gone through the solutions given in sdn , but i didn't get any solution for my issue.
    Hope to get a positive solution for this soon.
    Thanks
    prabhudutta

    This is error in ECC 6.0 for BUS2012.
    For the time being I am using solution which I have given in this thread but rigid solution is to raise an OSS note.
    I myself will raise an OSS but before would like to debug and find out what it is expecting exactly so i said use SWUE to find what went wrong.
    Cheers
    Jai
    I am having the same error, it goes into error for ECC6.0 version. I have not got chance to see why it is happening?
    any way for the time being you can do this : go to SWE2 and for given business object and receiver type, change the settings of "Behaviour upon error feedback" from "default" to "do not change linkage" so every time atleast event will trigger and so workflow, yeah ofcourse event will be queued in SWEAD. So final solution is an OSS
    NOTE:
    Check this thread, Glauco has given OSS note 797775
    /thread/781604 [original link is broken]

  • I am having trouble installing photoshop Lightroom.  I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer.  I am not sure how to go about doing so.

    I am having trouble installing photoshop Lightroom.  The program is installed and has some sections blocked off.  I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer.  I am not sure how to go about doing so. 

    If you have a serial number, you simply need to enter it into the proper fields.
    Since you don't say what version of Lightroom, and what sections are "blocked off", let me guess that you have Lightroom CC, and you need to enter the serial number to turn it into Lightroom 6. Here are the instructions: Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
    And if that's not the right assumption, then please give us the details.

  • My sound won't work on my ipad even though the sound is up and the button on the side is on volume? Any ideas ipad 2

    My sound won't work on my ipad even though the sound is up and the button at the side is on volume? Any ideas. For ipad 2

    They will replace it with a refurb of like kind if the problem is deemed to be hardware related and not caused by misue. They will probably try restoring the device and troubleshoot it on their own before they replace it for you .... And I'm talking about an Apple Store here.
    You should probably try this next.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

  • I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

  • Is this legit?             Confirm your email address  Dear Email Users,  As part of our security measures, we regularly screen activity in the E-mail system and after noticing an issue on your account password, we are requesting confirmation from you for

      Is this legit?
       Apple Support Team <applsupporteam @icloud.com>
           Confirm your email address
    Dear Email Users,
    As part of our security measures, we regularly screen activity in the E-mail system
    and after noticing an issue on your account password, we are requesting confirmation
    from you for the following reason:
    Our system requires further password verification.
    In accordance with E-mailUser Agreement, your account access will remain limited
    until the issue has been resolved. Unfortunately, if access to your account remains
    limited for an extended period of time, it may result in further limitations or
    eventual account closure.
    To verify your E-mail account, you must reply to this email
    immediately and enter your following
    information.
    First Name:
    Last Name:
    Email Username :
    Email Password :
    Thank you for using webmail
    Icloud. com support team
    <Edited By Host>

    Apple requests that you forward these types of emails to them as follows (from http://support.apple.com/kb/HT4933):
    If you receive a suspicious email, select the message text so that it is highlighted. Choose Forward as Attachmentfrom the Message menu (OS X Mail) or the Actions menu (Outlook). Send the email to [email protected] This provides Apple's legal department and law enforcement with useful information to help prevent future phishing emails.

  • Am trying to verify my email contact address. In the confirmation email I received, the link to verify is not active. This has been going on for over 2 weeks now.

    I am trying to verify my email contact address with Apple. In the confirmation email I received, the link to verify is not active. This has been going on for over 2 weeks. They keep sending emails where I can't click on "VERIFY Now".

    In case anyone else has this problem, it turns out that my email provider's software was stripping the link out before it got to my mailbox.

  • My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't.  The cables are not loose.  Gently touching the mouse will get the screen back, but often it immediately goes to the F11 mode.

    My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't.  The cables are not loose.  Gently touching the mouse will get the screen back, but often it immediately goes back to the F11 mode.  Is this a hardware or software issue?  How can it be fixed?

    I called Apple.  The problem was caused by settings in Mission Control.  After changing all 4 of the Hot Keys (if that's the proper term) shown in the bottom half of the Mission Control window in System Preferences to "-" by clicking on the drop down menus, the problem went away.  Apple's help was excellent!

  • Did a restore, and now my iPhone will not activate, though the iOS activation server seems to be "green"

    Did a restore, and now my iPhone will not activate, though the iOS activation server seems to be "green"
    SIM card is inserted, connected to wifi, and connected to iTunes though it tells me it is "unable to continue at this time"
    Any other solutions?

    Hi JG14usa,
    Welcome to the Apple Support Communities!
    I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Best regards,
    Joe

Maybe you are looking for