Evaluation dialog box - how to get rid of it

Hi,
Is there a way how to get rid of following dialog box when it appears?
Please note user is not allowed to click on any button. I need to do this purely by program. Ideally some registry entry.
Thank you, Michal.

Hi Roberto,
Yes! I noticed "Do not show this dialogue again" checkbox but I cannot use it due to several reasons. Let me explain.
I am using LabWindows/CVI ActiveX Controller to control the project creation/building process. This is running on different machines where I cannot really rely on whether this checkox was hit by anyone before or not. So this was a critical requirement to handle any such event without user intervention. Here starts the story where I was looking into automatic solution for how to handle this.
About your second question, the last one should be correct. The CEAL would have to be down for whole my evaulation period in order that CVI would stop working. But when CEAL is available again this 30-day evaluation period should be restarted and with another CEAL outage this window shown again. This is where I am like 90% certain. So please don't take this as an absolute truth if not confirmed by any NI staff.
Anyways as I said before I am not into this solution anymore but if anyone would have any idea how to simply handle this without any user intervention I would store this into my knowledge database . I already mentioned Windows function above which should work. Also there is a freeware SW called AutoIt which basically does the same.
Thank you, Michal.

Similar Messages

  • How to get rid Print Dialog in Smartforms

    Hi,
    We are using ECC 6.0. I have the following code for calling smartforms:
    DATA: ltp_control_parameters TYPE ssfctrlop,
            ltp_output_options TYPE ssfcompop.
      ltp_control_parameters-no_dialog = 'X'.
      ltp_control_parameters-preview = 'X'.
      ltp_control_parameters-preview = 'LOCL'.
      ltp_output_options-tddest = 'LOCL'.
    The problem is that the print dialog appears and asking for output device. How to get rid this?
    thanks,
    sid

    hi all,
    thank you for replying. i got rid of the print dialog box by filling in defaults->spool control->output device in the user profile->own data. And i just set the following in my code:
      ltp_control_parameters-no_dialog = 'X'.
      ltp_control_parameters-preview = 'X'.
    And also previously i mistakenly reset ltp_control_parameters-preview to 'LOCL' (refer to my previous post).
    regards,
    sid

  • How to get rid of the main text box in the back of the page AND move things

    I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

    Hi, Dylan. Welcome to Discussions.
    If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
    Also, you can create a text box the width of the page and then set it for 2 or more columns.
    When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
    Hope this helps to get you started.
    Walt

  • File dialog box: how get full path and filename (firefox 3.0 problem)

    Hi,
    I have a smilar problem then discussed in this thread: file dialog box: how get  full path and filename
    Now this solution doesn't seem to work in firefox 3.0,I only get the filename but not the full path.
    I have tried to solve this problem by adding *"netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");"* in a javacript function but that doesn't do the trick
    Although when i tested it local it does work.
    Any idees how to solve this?
    Best Regards
    Stijn

    Actually, that is strange and scarry. With 20% of the browser market share they decide to behave like Microsoft did in the past - they want to decide what users need and what they do not need. With 3.0 I have a real problem with some of my applications. They are all tested in IE6, IE7, FF2.0 and they all work the same way (they even work with Opera and Safari). Now, I will for sure not go there and make it work for 3.0, just because 2 out of 200 users use FF3.0. Up to now I have always recomended FF as the best browser. 3.0 causes my opinion to change completely. Competition is always good but it is a question if it is good if we have 20 different browsers out there with equal market shares.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • How to get rid of navigation box

    Hi guys i would like to know how to get rid of the navigation box in iphoto.  i have mountain lion and the most updated version of iLife. 
    this is the box i am reffering to . 

    Really? You asked a specific question and got a specific answer. Turns out you had a different question...
    You can't.
    Regards
    TD

  • How to get rid of missing link dialog?

    Hello All,
    Here is the description of the problem I am facing..
    From the indesign document I am exporting some incopy files.I close the indesign document and then I relocate the incopy files to some other location.
    Now I again reopen the indesign file, while opening, the missing link dialog pops up which asks for either not to fix the links or fixing the links automatically.
    How can I do the same thing programatically so that the Missing dialog will never pops up.
    So here are my two requirements.
    1) How to relink the files programatcally
    2) How to get rid of the missing link dialog.(also what is the widgetID of this dialog.?)
    I posted this question before also but couldn't get the solution.
    I tried every possible way available in sdk
    i.e using
    IUpdateLink
    kRestoreLinkCmdBoss
    IInCopyDocUtils
    etc.
    But I was unable to relink the files as well as supressing the missing link dialog.
    Any help in this matter will be highly appreciated.
    Regards,
    Yopangjo

    Hi Emanuele,<br /><br />Here is the code..I put this code in Respond function.<br />Please also refere the   FileActionsOpenDocResponder.I also tried using the functions CheckLinkedStories and others.<br /><br />//code start////<br />InterfacePtr<IDocumentSignalData> documentSignalData(signalMgr, UseDefaultIID());<br />ASSERT(documentSignalData != nil);<br />if (documentSignalData == nil) {<br />break;<br />}<br />InterfacePtr<IDocument> doc(documentSignalData->GetDocument(), UseDefaultIID());<br />if (!doc) {<br />break;<br />}<br /><br />IDataBase * db = GetDataBase(doc);<br />InterfacePtr<ILinksManager> linksManager(doc,UseDefaultIID());<br />if(linksManager == nil)<br />{<br />return;<br />}<br />for(int32 linkIndex = 0;linkIndex < linksManager->GetLinkCount();linkIndex++)<br />{<br />UIDRef linkUIDRef = linksManager->GetNthLinkUID(linkIndex);<br />InterfacePtr<IDataLink> dataLnk(linkUIDRef,UseDefaultIID());<br />if(dataLnk == nil)<br />{<br />continue;<br />}<br /><br />UIDList linkUIDList(linkUIDRef.GetDataBase());<br />linkUIDList.Append(linkUIDRef);<br /><br />NameInfo ni;<br />PMString formatName;<br />uint32 fileType;<br /><br />dataLnk->GetNameInfo(&ni,&formatName,&fileType);<br /><br />uint64 size,time;<br /><br />IDataLink::StateType stTp = dataLnk->GetStoredState(&size,&time);<br />switch(stTp)<br />{<br /><br />case IDataLink::kLinkNormal:<br />break;<br /><br />case IDataLink::kLinkMissing : <br />case IDataLink::kLinkOutOfDate :<br />{<br /><br />//code for relinking.<br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br />if(relinkCmd == nil)<br />{<br />continue;<br />}<br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); <br />if(relinkCmdData == nil)<br />{<br />continue;<br />}<br /><br />//Here you can hardcode the file name in place of dataLnk->GetFullName()<br />relinkCmdData->Set(db, linkUIDRef.GetUID(),&ni, &formatName, fileType, IDataLink::kLinkNormal,(dataLnk->GetFullName())); <br />CmdUtils::ProcessCommand(relinkCmd); <br /><br />//update the link<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br />if(dataLinkHelper == nil)<br />{<br />return;<br />}<br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />updateLink->DoUpdateLink(dataLnk, &newLinkUID );//kFullUI);<br /><br />//The program crashes here<br />InterfacePtr<ICommand> command(CmdUtils::CreateCommand(kRefreshCmdBoss));<br />InterfacePtr<IRefreshCmdData> data(command, IID_IREFRESHCMDDATA);<br />data->Set(GetDataBase(dataLnk), newLinkUID, IDataLink::kLinkNormal);<br />CmdUtils::ExecuteCommand(command);<br /><br />}          <br /><br />//code end.<br />(please check for any missing brackets.)<br /><br />Thanks and Regards,<br />Yopangjo

  • HT1338 How to get rid of Apple Support Community notices, my box is full I receive thousand a day and I really cannot handle it.  Please help, I cannot find the notification tad in my "preferences"  I have Mac OS X 10.7.5.  Please help it is urgent

    How to get rid of Apple Support Community notices?  my box is full as I receive thousand of messages a day.  I cannot handle it anymore, please it is urgent.  Help!  I have Mac OS X 10.7.5 and unable to find the "notification tab" in my "preferences"  I need a image if possible to better understand.  Thanks a lot.

    Thank you, but I just  tried everything you said, my apple id account (icloud) continues and still is receiving the email from ASC each second.  My i phone and macpro (i cloud account) is full of messages that I have difficult to erase at once.  I have to do it one by one which can take me the whole day.  How can i unsucribe from ASC, just get ride of my account, I mean cancel the ASC account, so I will not get any messages.  Please help.  Thanks.

  • How to get ride of a black space box on screen

    how to get ride of a black floating text box from the computer.

    Turn off VoiceOver in the Universal Access or Accessibility pane of System Preferences.
    (88073)

  • How do get rid of the google search box when I first open Firefox?

    How do get rid of the google search box when I first open Firefox?

    Firefox 4 and later versions use a new build-in home page named <b>about:home</b> with a Google search bar on it.
    That about:home page only shows some snippets and has a button to restore the previous session if applicable.
    If you want a home page with extras then set another page as the home page like www.google.com as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/How+to+set+the+home+page
    See also:
    *Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" "Show a blank page"

  • How eo get rid of the annoying pop-up box just below the search box on the mozilla home page when I open mozilla?

    how eo get rid of the annoying pop-up box just below the search box on the mozilla home page when I open mozilla?

    That is the snippet container.
    You can hide that container or set the <b>browser.aboutHomeSnippets.updateUrl</b> pref to an empty String on the <b>about:config</b> to make Firefox use some default snippets.
    *http://kb.mozillazine.org/about:config
    You can hide the box that shows the snippets with code in userContent.css
    *http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    *ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    <pre><nowiki>@-moz-document url(about:home){
    /* hide snippet container on the about:home page */
    #snippetContainer { display: none !important; }
    }</nowiki></pre>
    Can you attach a screenshot if you mean something else?
    *http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

  • I have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

    i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

    You installed a variant of the "VSearch" trojan. Remove it as follows.
    This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
    /Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/2c232f1e4d12129e
    /System/Library/Frameworks/v.framework
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Black dialogue box onscreen describing everything being done and i don't know how to get rid of it

    my mac book pro has a black dialogue box near the top of the screen that explains everything that is currently being done and i don't know how to remove it. Does anyone have any idea how to get rid of it.black dialogue box

    Could be you enabled Voice over by mistake. Take a look in System Preferences->Accessibility;Voice Over and see if it is enabled.
    (The key sequence command-F5 toggles voice over on and off)

  • How to get rid of Safari !!!!!

    I must have missed the message to install Safari during one of the many iTunes updates and now I'm stuck with it on my computer taking up 60GB of space! I've tried removing it through Control Panel -> Uninstall Programs, but get the message that I don't have administrator privilages - which I do. Thinking I may have had this installed while I was logged in under my main administrator name, I logged off and logged back in under my only other user name and tried again - same message. So I went to the Safari folder and changed all security privilages to full access for both accounts and it still won't uninstall. How can this program claim I don't have administrator privilages when I used the only two user accounts on my computer?? So in a fit of defiance and desperation, I deleted the Safari folder and then ran the name "safari" in Vista's search box under the Start menu (I even included the wildcard .* to catch all examples). Guess what? Rather than find all traces of safari on my computer so I could delete them manually, Safari started running again!! I cancelled the program before it finished loading and went to recheck the Program Files folder and Safari was back there with a full 60GB of files again! I CAN'T GET RID OF IT!!
    Safari is a malicious software program as bad as any Malware or Adware I have ever seen! How can I get rid of it??
    (and no, I really do not want Safari - I don't care if you think its the greatest thing since sliced bread - I make the choices on my computer, not some software engineer or marketing division and I DON'T WANT SAFARI!!)
    Any suggestions on how to get rid of it? Did I miss something?
    Thanks all,
    LH

    The Safari update is not clear what it is and provided no explanation of what it was - it simply states "Safari". For all I know it could have been an indexing file for iTunes. There was no explanation as to what is was and the install checkbox was already checked so the unsuspecting may quickly and accidentaly hit install along with the iTunes update, thinking it was a required part of iTunes. Regardless of how it got there, I'm trying to get rid of it and it won't uninstall.
    Now you may fancy yourself as some kind of wunderkind software expert, but you apparently do not know Vista because it really does take up 60 GB and every time I delete it, it tries to reinstall itself. These are not multiple installations and I am the only user on this computer. You haven't offered me any help - only insults. If you aren't willing or able to offer help or assistance in the most sincerest form this request was intended, than stay out of this thread. Your actions and insults reinforce the prevailing belief that Apple users are unkind, rude, self-important snobs.

  • I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

    I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

    There is no need to download anything to solve this problem.
    You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Applications/Genieo.app
    /Applications/Reset Search.app
    /Applications/Uninstall Genieo.app
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib
    /usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib
    ~/Library/Application Support/com.genieoinnovation.Installer
    ~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

  • New item icon in iCal suddenly appears and don't how to get rid of it.

    I have a little number 1 in my iCal next to my Home calendar on the left side of iCal. It resembles the little number 1 I'd get in the Mail program if I had one new email.
    I have no idea where it came from and want it GONE. Can you help?

    I just figured out how to get rid of the numbers. Click Notifications on the bottom left part of the Ical screen and some blank invitations will show up. Click one and a box shows up that gives you the option of deleting the Notification/Invitation. I did that for the 4 little boxes and the number is gone.

Maybe you are looking for