Evaluation License Update
Hi, I am presently using the evaluation version of Weblogic Server 6.1. My evaluation
license has expired recently. I am not sure how to update it. In the documentation
for updating license it is mentioned that evaluation license can be updated. Can
someone tell from where i can get hat evaluation license update.
Thanks in advance.
Regards,
Deepak
Hi, I am presently using the evaluation version of Weblogic Server 6.1. My evaluation
license has expired recently. I am not sure how to update it. In the documentation
for updating license it is mentioned that evaluation license can be updated. Can
someone tell from where i can get hat evaluation license update.
Thanks in advance.
Regards,
Deepak
Similar Messages
-
Updating Evaluation License for WLCS 3.5
Hi,
I am still evaluating WLCS 3.5 and would like to obtain a new evaluation
license (my existing one ran out today). According to the docs this should
just involve downloading another license and running UpdateLicense.cmd from
the BEA_HOME directory where both the new and old license files reside.
However, doing this has not had any noticeable effect (ie I can't start the
server). The license.bea file still has today as the expiration date. Also
do I need to upgrade my WLS6.0 license separately as well? A quick response
would be appreciated.
Regards
Laura AllenIncidently, I can start the underlying WLS6.0 ok - I thought they used the
same license file? The error I get when attempting to start WLCS is as
follows:
<14-Aug-01 15:48:44 BST> <Error> <COMMERCE_SERVER_FRAMEWORK> <LOG_FATAL:
WebLogi
c Personalization Server: Core Server: 3.5 license error.>
Press any key to continue . . .
"Laura Allen" <[email protected]> wrote in message
news:3b793430$[email protected]..
Hi,
I am still evaluating WLCS 3.5 and would like to obtain a new evaluation
license (my existing one ran out today). According to the docs thisshould
just involve downloading another license and running UpdateLicense.cmdfrom
the BEA_HOME directory where both the new and old license files reside.
However, doing this has not had any noticeable effect (ie I can't startthe
server). The license.bea file still has today as the expiration date.Also
do I need to upgrade my WLS6.0 license separately as well? A quickresponse
would be appreciated.
Regards
Laura Allen -
Evaluation license is expired...
....and i need an extension, but I can find no way to do this on the website.
I've gcontacted our representative @ BEA, but it could be quite a while
before he gets back to me, meanwhile I'm losing very precious development
time.
Thirty days is nowhere near enough time to evaluate an application server,
and you don't even get the full 30 days when you download and install. My
installation is 8 days old, and already it's expired. It was a 6.0 beta 2
installation... I downloaded and installed the new (production?) version,
installed it and still cannot start up.
Thanks,
John Stotler
SocratEase
http://www.SocratEase.comUnfortunately, the way that weblogic is packaged mandates that they update the
download periodically to include a new license file... Please send mail to
[email protected] to make them aware of the problem.
fnord wrote:
See, during development, companies will often test various application
servers. My evaluation license lasted 8 days. After 8 days I could no longer
test our beans on this server.
So, this is development time during which I can't test the server. Losing
time.
The existing license was expired, after only 8 days. The uninstall didn't
take care of it. Maybe they fixed the download.
"Mike Reiche" <[email protected]> wrote in message
news:3a424512$[email protected]..
You're losing development time? How's that - it's an EVALUATION license.
Download/install the product again and you'll get a new EVALUATIONlicense.
The installer might be smart enough to not overwrite your existinglicense,
so you might try to de-install the product, or at least remove the licensefile.
Mike
"fnord" <[email protected]> wrote:
....and i need an extension, but I can find no way to do this on the
website.
I've gcontacted our representative @ BEA, but it could be quite a while
before he gets back to me, meanwhile I'm losing very precious development
time.
Thirty days is nowhere near enough time to evaluate an applicationserver,
and you don't even get the full 30 days when you download and install.My
installation is 8 days old, and already it's expired. It was a 6.0 beta 2
installation... I downloaded and installed the new (production?) version,
installed it and still cannot start up.
Thanks,
John Stotler
SocratEase
http://www.SocratEase.com -
First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?
Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?If you still have your serial number for Acrobat Pro there is a link to the installer here: Download Acrobat products | 9, 8
-
How do I get evaluation license key for linux NW04s installation.
Can anyone help please.
I am going through this site on linux , but there is no link to get the evaluation license key for NW04s.
I downloaded all the binaries.
Thanks.
TKhi,
on the installler DVD, you should find README or INSTALL file. You could get from there about the link to extend your eval key.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com -
Where to get the evaluation license of system ID NW4
hi,
I have installed successfully the SAP Netweaver 04 Testdrive SR1 (wen application server 6.4). I am searching the evaluated license key at the SAP website.
I checked this one..........
http://www.sap.com/minisap
but here no entry for the SAP system ID "NW4"
pls do let me know from where i will be receiving the same.
Abhishekoha no...........
Earlier i install the NW1 now NW4. I can not go for N4S, as i think this is for 64 bit system or for IBM DB2. I just have 32 bit and SUSE installed.
every thing was ok with installation of NW4, but when i am trying to connect with the SAPGUI, I got the ABAP run time error message rather than the login window. it is like that.........
========================================================
ABAP Runtime Errors 1
Runtime Errors DBIF_RSQL_INVALID_REQUEST
Occurred on 2009/03/30
invalid call of database interface.
What happened?
The current ABAP/4 program terminated due to
an internal error in the database interface.
Error analysis
In a statement an invalid request was made to the database interface
when accessing table "DOKTL ".
Last error
logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Server localhost_NW4_00 on host localhost (wp 0)"
Version.............. 37
Error code........... "-16"
Error text........... "verify own hostname (localhost) failed"
Description.......... "NiIMyAdrVerify"
System call.......... " "
Module............... "nixxi.cpp"
Line................. 3112
The error reported by the operating system is:
Error number..... " "
Error text....... " "
Trigger Location of Runtime Error:
Program Name SAPMSYST
Include SAPMSYST
Row 2,529
Module type (FORM)
Module Name FILL_INFO_TAB
===================================================================
is all this error due to the license expired?
Abhishek -
CollabraSuite. Is the evaluation license from BEA valid?
Hi,
I downloaded CollabraSuite 5.1 and the evaluation license from BEA website. I followed the installation guide (http://edocs.bea.com/collabrasuite/docs51/pdf/InstallGuide.pdf) to install CollabraSuite, create a portal and add the Collabra portlets. However, when I accessed the portal, I encountered LicenseException. The error details are:
com.collabraspace.cserver.interfaces.LicenseException: Missing or invalid license for CollabraSuite, BEA Edition 5.1
at jrockit.reflect.NativeConstructorInvoker.newInstance([Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Constructor.newInstance([Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at com.collabraspace.cserver.ejb.CampusServiceEJB.throwLicenseException(CampusServiceEJB.java:5664)
at com.collabraspace.cserver.ejb.CampusServiceEJB.serviceEvent(CampusServiceEJB.java:4984)
at com.collabraspace.cserver.ejb.CampusServiceEJB.login(CampusServiceEJB.java:3861)
at com.collabraspace.cserver.ejb.CampusService_loguk6_ELOImpl.login(CampusService_loguk6_ELOImpl.java:10885)
at com.collabraspace.cserver.ejb.ClientServiceEJB.login(ClientServiceEJB.java:865)
at com.collabraspace.cserver.ejb.ClientService_6ro6k6_ELOImpl.login(ClientService_6ro6k6_ELOImpl.java:5561)
at com.collabraspace.ria.common.api.ClientService.login(ClientService.java:225)
at com.collabraspace.ria.servlet.action.api.LoginStrutsAction.execute(LoginStrutsAction.java:81)
at com.collabraspace.ria.common.api.BaseCommandStrutsAction.execute(BaseCommandStrutsAction.java:83)
at com.collabraspace.ria.common.api.BaseCommandStrutsAction.execute(BaseCommandStrutsAction.java:52)
at com.collabraspace.ria.common.api.BaseXmlStrutsAction.execute(BaseXmlStrutsAction.java:63)
at com.collabraspace.ria.common.api.BaseAction.execute(BaseAction.java:344)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
Any idea what could have gone wrong?I am not involved with the practice of extending evaluation licenses. However, if you directly received that code from NI, I would recommend to contact your local NI representative.
-
Adobe Photoshop CS4
I am receiving an error message "Error: 150:30" after having my computer serviced.
Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1.
I tried to download a Licensing update, but can't get that to open.????
My machine had originally been a clone of another Mac. Not it looks like a brand new computer.
Possibly there is something in system preferences to change? I turned off Firewall and allow downloads from all parties.
Thank You for you help!
joe150:30 means the licensing failed. Photoshop can't be moved like other programs from another drive or from backup.
I would suggest a reinstall to fix it. Anytime you move Photoshop from from drive to another, it breaks licensing. A install is the quickest way. to fix it.
When you are done with the install, apply all CS4 updates. Product updates
Gene
(Remember to mark the answer that solved your issue by clicking on “correct”. This indicates the question is answered and credits those who took time to help you or followup if there are further questions) -
WLC 5508 Evaluation License Expiry
Hi,
I have a customer who wants to do some WLC migration works. They have a spare 5508 (50 License) that they want to use to house their 100+ APs during the migration works as they are temporarily decommissioning the active 5508s. They have asked me whether they can get an extension to the evaluation license (I suggested the eval license may be the best option to get through this with minimal hassle) as they feel 60 days might not be long enough!
Thinking about it I read this in the WLC config guide regarding eval licenses:
"To prevent disruptions in operation, the controller does not switch licenses when an evaluation license expires. You must reboot the controller in order to return to a permanent license. Following a reboot, the controller defaults to the same feature set level as the expired evaluation license. If no permanent license at the same feature set level is installed, the controller uses a permanent license at another level or an unexpired evaluation license."
This suggests that the license will just continue to be active until a reboot? Is that correct, has anybody seen this in action. I have seen this sort of thing before with IOS-XE code where a feature is enabled as evaluation, and once it expires it doesn't stop the feature working, just sends loads of snmp traps complaining about not having the correct license level.
I would be interested if anyone knows what really happens once the eval expires and if the eval license count will remain active until WLC reboot.
Thanks
RockyHi,
I have found another option for this unorthodox scenario. I just as an idea went to see if I could get a demo license for a 5508 I have in our lab (which currently has default eval license on it) from Cisco's license portal. Surprisingly it issued me a eval license, I installed it successfully onto the 5508! I now have 2x eval licenses, so in theory this will work for my customer as he can use this again for another 60 days!
I then thought I'd try again and see how far I can push it :) I then got a message saying:
We are unable to provide you with a license at this time.
You cannot obtain multiple trial licenses for the same UDI.
Ok, that makes sense, but I was able to add another eval on-top of the factory sent one.
What I will do is invoke it and see how it goes, and also I will then get to see what happens after 60 days.
Thoughts welcome.
Rocky -
Extending the evaluation license asks for current activation code. Where is it?
I am attempting to extend the evaluation period for the Vision Acquisition Software. I have obtained an activation code from NI.com to manually enter and extend the evaluation period. When I access the activation wizard through the NI License manager and select the option to manually enter the activation code, the next step asks for the current activation code. How do I find out the current activation code so that I can advance to the step for entering the new activation code?
Thank you for your assistance.I am not involved with the practice of extending evaluation licenses. However, if you directly received that code from NI, I would recommend to contact your local NI representative.
-
Last license check 4 weeks and evaluation license key timed out
Due to holidays and other projetcs I've used my SAP NetWeaver Sneak Preview ABAP last time in October '08, my evaluation license kex ended 12-29-08.
Today I've tried as usual to install the today requested new eval lic key.
But I'm not able to install the new license key because of different errors, for example error code 113.
And because of so long not unsing my DEMOSYSTEM there's no possibility to use a temporary license to delete the old invalid license.
So my system is now in a helpless mode with no valid key.
Does anyone have a clue how to solve this problem without reinstalling?
Best wishes for New Year
Mark
Edited by: Markus Hagl on Jan 2, 2009 1:50 PM: deleted typing errorsat first sight it sounded as a good idea - but my problem is accompanied by the fact, that I'm using my NSP in a VM and so I'm in a bit of trouble by changing system date.
Some processes request an accurate sys time and date.
Unfortunately I would have to repeat this procedure more than 2 times since last login I found out beause my last login is more than 8 weeks ago before 12-29-08...
I'm sure there must be a solution that keeps me from reinstalling ans allows me to change to a new lic.
Best regards
Mark -
Prime 1.3 cannot see MSE evaluation licenses
Hello!
We have zero-based installed Prime 1.3 and MSE 7.3.101 virtual appliances on ESXi 5.0.
When I add MSE to Prime, on the second step (Licensing) it is seen that MSE license is not activated and there are no evaluation license at all (PI-MSE-license.jpg).
After adding MSE, in prime -> Administration -> MSE license there are also no information about any evaluation licenses.
license information from MSE
[root@mse-demo-1 ~]# getmselicenseinfo.sh
Licensing element: Tag
Licensing Limit: 100
License status: Active
License type: Evaluation
Count: 0
Unlicensed Count: 0
Number of days left: 60
Licensing element: OtherElement
Licensing Limit: 100
License status: Active
License type: Evaluation
Count: 0
Unlicensed Count: 0
Number of days left: 60
Licensing element: KAMAP
Licensing Limit: 10
License status: Inactive
License type: Evaluation
Count: 0
Unlicensed Count: 0
Number of days left: 60
Licensing element: ELMAP
Licensing Limit: 10
License status: Inactive
License type: Evaluation
Count: 0
Unlicensed Count: 0
Number of days left: 60
Licensing element: MsapSAClicks
Licensing Limit: 1000
License status: Inactive
License type: Evaluation
Count: 0
Unlicensed Count: 0
Number of days left: 60
How to make PI see MSE evaluation licences?Previously I installed two different virtual MSE and both of them had evaluation licenses, which were successfully seen from Prime.
More over I already installed the same ova MSE file on the same ESXi and all was ok. The difference, is that instead of prime there was ncs 1.1
Sent from Cisco Technical Support iPhone App -
B1DIEventService: Only 90 days evaluation license available
Hi everybody.
I am using B1DIEventService and want to get a full license to use it in customer addons. Now I have no idea how to get a full license; the downloaded version is a 90 days evaluation license.
Additional question to this topic: Do I need a license for each server and each client?
Can anybody help me?
Best regards,
RalphHi Ralph,
B1DIEventService is given for free without time limitation. You can deliver it together with your addons, there is no problem.
The 90 days license is only the general license term given by SDN for all published tools.
Please don't forget there is no support or responsibility from SAP for the tools published in SDN.
Best Regards
Trinidad. -
Vision Evaluation License - Past Expiration Date
Hello All;
A word of caution if you are using LabVIEW 8.x with Vision 8.x installed as runtime: If you are using NI Vision in a runtime environment and have elected to use the 30-day evaluation license before purchasing a valid license, this is for you.
The evaluation license version has a few quirks associated with it. This caused some minor grief for me, and so I am passing it along. The only way to resolve these issues (that I am aware of) is to purchase and activate a valid license.
(1) Sometimes the license version will not always initialise correctly. This has resulted in runtime application that may appear to be buggy. If you are using the 30-day evaluation license, there is an additional toolbar that pops up, and you will need to select "Evaluate" if you do not have a license. If this does not pop up, the runtime app may seem to work correctly, but guaranteed it will hang or do something weird.
(2) When the 30-day trial has expired, do not count on a friendly message stating just that - sometimes you get it, sometimes you don't. Or it may be that it will show up the first time and that's it. I've seen both. Point is, if your runtime program was working fine "x" number of days ago, and no longer is, check the error messages generated. Chances are, there will be an "invalid IMAQ License" error in there somewhere.
Anyway, as I mentioned, 30-day evalutaion license is great, but it may give you some weird issues. The solution (and this has resolved all the cases I have come across - not that I'm an expert or anything) is to purchase and activate a valid license.
This caused me a certain amount of grief in the past. Hopefully it will help someone else out in the future.
DJH
Message Edited by Hannamon on 12-14-2006 01:17 PMYes, I've got the same too.
The problem was with Vision 7. We have put NIVision.dll and NIVisSvc.dll into installer, but have forgot to call appropriate Runtime installer (or probably old version was installed, and then libraries with new version was overwritten, but not licenced). Anyway, all was good, without any nag screens, but after 30 days license was expired (also without any message). After reinstalling runtime all was OK.
Question for NI - how to get license status programmatically in application?
best regards -
WebLogicCommerce3.5 Evaluation License
Hi,
I have installed the WLCS 3.5 on my machine with weblogic 6.1 sp1 on windows platform. I am unable to start the commerce server.
The get the below error in the weblogic.log file:
==========================
####<Feb 20, 2003 10:04:14 PM IST> <Info> <Logging> <mand-093> <wlcsServer> <main> <> <> <000000> <FileLogger Opened.>
####<Feb 20, 2003 10:04:25 PM IST> <Error> <COMMERCE_SERVER_FRAMEWORK> <mand-093> <wlcsServer> <main> <> <> <000000> <LOG_FATAL: WebLogic Personalization Server: Core Server: 3.5 license error.>
====================================
Can you revert back with a remedy for this.
Thanks
ManojYou should contact your BEA representative, who can provide you with an
evaluation license.
Michael Girdley
BEA Systems Inc
"Bruce Kosbab" <[email protected]> wrote in message
news:[email protected]..
I have a similar issue. I am trying to evaluate an application that
requires WLS 4.5.1.
How do I obtain an eval copy of 4.5.1?
Thanks,
-Bruce Kosbab
Maybe you are looking for
-
IPhoto wont open library after upgrade
I just updated to iLife 11 and iPhoto will not open. I get the following message: You can't open your current photo library using this version of iPhoto. This library must be upgraded by the iPhoto Library Upgrader application before you can use it w
-
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
-
ITunes where showing two public folders when there is one
At some point recently my Mac starting seeing my MyBookWorld NAS as "\\Volumes\Public-1" and "\\Volumes\Public-2" where it just use to see one "\\Volumes\Public". It is all the same drive. Now iTunes "where" shows some music in one public-1 and othe
-
How to make a logic script ?
Hi all ! I would like to make a simple thing : make a SUM of 4 accounts by a LogicScript. I make this one, called CALC_EFF.LGF, which I included in my DEFAULT.LGF (*INCLUDE CALC_EFF.LGF) *XDIM_MEMBERSET COSTELEMENT =G101,G102,G120,G122 *WHEN COSTELEM
-
How do I get my iMessages only on my phone?
I need help because my imessages are going off on my ipad , imac and iphone and its driving me crazy? How do i get it to only go to my phone?