Evaluation path for team calender in MSS

Hi Experts,
I need to configure an evaluation path as follows.
1.  A manager  M1 belongs to org unit O1. He manages Org unit O2.
2.  Org unit O2 reports to O1. similarly O3 also reports to O1.
3.  Now I need to develop a evaluation path in which, M1 should have visibility to all employees from both O2 and O3 in his MSS..
I have tried out many combinations with A002 and B002 relationships. but it not working.
So could you help me to build this evaluation path.
Thanks
Sameer

there are standard evaluation paths available which should fulfil thsi requirement
Check SAP_MANG
SBESX
MSSDIREC
You can use report report RHSTRU00, to check your own path

Similar Messages

  • Evaluation path for B002 - OOAW

    Hi
    I'm creating a evaluation path for fetching all reports under a line manager. Can someone please throw light on how to configure thie in OOAW. It works fine SAP_MANG, I tried to modify but iam not able to get this.
    - Aravind

    Hi,
    B002 is normally used as an O-O relationship.  If you look at evaluation path O-S-P in OOAW.  You will see how it is used here.
    O-S-P might actually meet your requirement.
    let me know.
    thanks.
    JB

  • Help to evaluation path for ESS

    Hi
    I have to make a report/list in the portal, where an employee can see i.e. the birthday of all the colleagues directly under the employees manager.
    Is there a standard evaluation path for this ? Or can someone point me in the right direction (and remember I am new to evaluation paths)
    Thanks
    /Jakob

    Hi Siddharth 
    Thank you for your reply.
    I have created the evaluation path as you described, but when I test it using PPSS, with the following data :
                                                                                    Objekttype           P   Person                                               
    ObjektID             00032422      ib                                         
    Betegnelse           ib, ibsen                                                                               
    Evalueringsvej       Z_ess_co  Test af at finde hvilke objekter der er løn på t
                                                                                    Behandlingsperiode   28.09.2008  til  31.12.9999                                                                               
    Where the person "00032422" is part of an organization with several employees. I was expecting a list of employees directly under the manager of employee "00032422".
    Anything I have misunderstood or done wrong?
    Thanks
    /Jakob

  • Menu path for factory calender. SCAL tcode

    Dear all,
    Please let me know the menu path for factory calender. SCAL tcode

    Madhava
    I cannot comment on Raghavendra's company's business policies.
    User menus are user specific.  SAP menu is generic (by default).
    My personal opinion is that everyone should have full access to every branch of the standard SAP Easy Access menu.  If you wish to prevent users from accessing certain transactions, it should be handled through standard auth objects, and not by 'hiding' branches of the SAP menu.
    In most production systems, config change is locked down.  Therefore, regardless of authorization, SCAL is only effective to VIEW calendars, and not CHANGE them in production.  Pretty harmless, as far as I am concerned.
    If your company wishes to add SCAL to a particular menu path, this can be done.  In my company, this type of change is handled by developers.
    Rgds,
    DB49

  • MSS Team View evaluation path for non chief positions (s-s)

    Hello,
    We have a problem with display of employees under non chief manager - reporting managers (connection A002). In our organization we have line managers and under them team managers who are leading team of employees. Those managers want to see their employees under MSS Team View iView.
    I have checked forum posts and try to create correct evaluation path but i didn't get results yet. I have created 2 evaluation paths:
    Z_MANG (copy of SAP_MANG):
    10 *     B 008      S
    20 S    B 002      S
    30 US  A 208 P
    Z_S-S (copy of MSSDIREC):
    10 S  A 002     S
    20 S  A 008     P
    30 S  A 008     US
    I also included them into rules so:
    Root rule (rule 1) - Z_MANG
    Target rule (rule 3) - Z_S-S
    I have also done customizing under Object and Data provider and if I choose standard evaluation paths (e.g. SAP_MANG and MSSDIREC), I get employees shown - if I give manager a hat (A012 connection).
    Could you please help me with advice, where am I wrong? I think that first evaluation path (Z_MANG) is ok and it finds non chief manager, maybe is a problem with second one that don't show employees?
    Thank you for answers in advance.
    Best regards,
    David

    My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
    S A 002 Reports (line) or
    S B 002 Is line supervisor
    but figured u will still have depth issues..so therefore
    you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
    say you have four levels  why dont you use different evalutaion path to link them between each level..
    say 1st to 2nd (reports to A002)
          2nd to 3rd (subordinate to A005)
          3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
    this way you will not have the depth issue as each one is diffeent Ev path..
    ...oops i can see people laughing at this solution..but well..i tried!

  • Evaluation path for MSS role

    Hi all,
    Is there a way to assign MSS role dynamically to an employee if he has employees reporting to him?
    We have got to know that this can be achieved by configuring some evaluation path.
    Any pointers would be appreciated!
    TIA!

    Diana,
    Where actually do you assign the roles ,is it in the portal or you have a CUA system where all the role maintenance is done over there.if second one is true you can write a custom program and assign the role by checking the direct reportees
    Thanks
    Bala Duvvuri

  • Evaluation Path for Position to Position Reporting Structure

    Hello Everyone,
    We currently have a position to position reporting structure in place.  WIth this being said, not every supervisor in our organization is the chief of a team.  I am trying to create an evaluation path that will look at a position, then go up to get the positions report to position (but not go up any further), then go down to get the positions that report to the supervisor.  This will allow us to start with a position, then return all the positions that the report to position has.  In essence this will allow us to start with a position and get the team (though we don't have an org unit for the team).  I am trying to do this for the Team Calendar in ESS. 
    Below is what I have.  The problem is with the depth, if I enter a 2, then it is not getting the lateral positions, but if I enter a 3, then it goes up to another level and gets an additional supervisor (which I do not want).
    S     A     002     Reports (line) to     2     S
    S     B     002     Is line supervisor of     1     S
    S     A     008     Holder     3     P
    Has anyone developed and Evaluation Path that does this (gets a positions team without having an org unit) and can offer assistance?
    Best Regards,
    Scott

    My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
    S A 002 Reports (line) or
    S B 002 Is line supervisor
    but figured u will still have depth issues..so therefore
    you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
    say you have four levels  why dont you use different evalutaion path to link them between each level..
    say 1st to 2nd (reports to A002)
          2nd to 3rd (subordinate to A005)
          3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
    this way you will not have the depth issue as each one is diffeent Ev path..
    ...oops i can see people laughing at this solution..but well..i tried!

  • Evaluation Path for Appraisal docs

    Hi  Friends-    
    These  FMs  using  such  Evaluation Paths  creating  Appraisal docs  for  Given ' Org Unit '   'O'
    1) HRHAP_DOCUMENT_PREP_ORG                      using   'BOSSORG' ,
    2) HRHAP_PREP_READ_ORG_STRUCTURE         using   'HAP_ORG',
    3) STRUCTURE_BUILD_MULTIPLE_ROOTS          using the same 'HAP_ORG'
    What  Evaluation Path i shd  pass in these FMs   to  create Appraisal docs  for  Given  Employees ' Perner'   ?
    These all FM  used in one standard Report  RHXHAP_APP_DOC_PREPARE    which i need to copy and enhance for pernr also ...
    Or is there  Standard FMs  are there which creates  Appraisal docs based on Employees 'P' ?
    Pls share your inputs on this.
    Regards
    Meeta

    ok

  • Evaluation Paths for Audit Requirements

    Hi,
    For requirements, which belong to the "Subrequirements" requirements category, is "A500" typically the value that one would specify for this?
    Thank you,
    Eric

    Yesterday, I defined the evaluation path as you suggested. I am still seeing problems, so I assume that I must have something misconfigured or unconfigured somewhere else. This implies that I'm probably not done bothering the forum yet....
    As far as getting the "SC" requirement selection into 4.72, it is not much of an issue for me, since we are supposed to be upgrading fairly soon, and for testing purposes, I should be able to use an eval path. I might still post an OSS message, as you suggest.
    One thing that would be nice would be a complete "changelog" to view somewhere. I can see the release notes for my version in the implementation guide, but it would be nice to see the release notes for all versions. This would allow someone to make a quick determination about what became available and when. If such a changelog already exists, can you tell me where to access it?
    Thanks again for your help, Joachim.
    Best,
      Eric

  • Evaluation Path for Direct Reports only

    Hi
    We have written an evaluation path to return direct reports for a given manager (to use in an Adobe Interactive form). We get the correct employees returned, but also the manger himself. Ideally we want a list of names that doesn't include him.
    Here's our path:
    No      Obj      A/B     Rel     Rel name         Priority      Rel Obj Type    Skip
    10       US       B       008     Holder                 *                   S  
    20       P         B       008     Holder                 *                   S
    30       S         A       012     Manages             *                   O
    40       O         B       003     Incorporates        *                   S
    50       S         A       008     Holder                 *                   P      
    What change should we make to not include the manager in the returned set?
    Thanks
    Trish

    Hello,
    Sorry but you can't.
    SAP considers that Manager is not assigned to his own org unit (A012 not equal to A008).
    I had the same issue and i had to create 2 evaluations path :
       - one to get the list of employee (manager include)
       - one to get the manager only
    and exclude the second one in the report.
    Edited by: Cédric LEFRANCOIS on Dec 21, 2009 11:47 AM

  • Evalution path for PFAL to handle concurrent employee asignment.

    Hello,
    While using PFAL to push any object of type 'P'(employee), the standard process is creating IDoc segments only for the given employee, But how is it possible to create IDoc segments for its other assignments also?
    I need to create IDoc segments of all the assignments for the employee given in PFAL selection screen.
    Is there any evalution path (relating to 'CP') could help?
    Thanks.
    Edited by: Parthasarathi Mohanty on Jun 1, 2011 1:01 PM

    Hi,
    Thanks,
    A209 evaluation path adds the IDoc segment of the Central Person (CP) related to the 'P'.
    I need the IDoc segments of all the assignments of the P.
    For e.g: The 'P' entered in the selection screen of PFAL has 3 assignments with a single CP.
    I need the IDoc segments to be created for all the 3 assignments. (Segments related to CP not required)

  • Evaluation Path for View of Organizational Structure

    Hi all,
    I am trying to define new VIEWID using EVPATH which would do the following filtering (by using f.m. HRWPC_GET_NAV_SUBTREE): giving org.unit number, it would return employees of current org unit and in case that there are some sub org units  which dont have the boss also all employees of those org units and in case that the sub org. unit have the boss only the boss.
    I saw there is Evaluation path SBES, which shows me the employees of given org unit, or SBESX which gives all including suborgs, but I cannot find Ev. path which will do more complicated conditions.
    I can see EVPATH only on T778A table with short description, is there any other way to see them with more details?
    Thank you and best regards,
    Anna

    Hi Anna,
    You will find all the existing eval paths in table T778A itself.
    I am not sure if you have seen the individual maintenance too.
    You can also create your own eval paths acc to your requirement too.
    But as far as i know all the things wrt to eval paths can be managed there itself
    Hope it helps!
    Regards,
    SR

  • Regarding team calender in MSS

    Hi All,
    In MSS, we are facing a problem in Team calendar. When I click on the Team , the team calendar along with other iviews are displayed in that page,the team calendar is showing for present month, but when i selected privious month it is showing emty table. Please let me know what are actions to be done to get previos month data.
    Thanks in Advance
    Edited by: MaheeshReddY on Oct 27, 2009 11:36 AM

    If the employee was not a subordinate during the month of choice you may not get historical data
    This may also depend on authorization checks in OM and PT
    Best wishes
    Stuart

  • Evaluation path for Nakisa

    Hi experts,
    I would like to change the evluation path (wegid in the R3 system) for the Nakisa.
    Example: Currently Nakisa uses some kind of evluation path, but I would like to use another one e.e. "ZM_OSP".
    My question is how can I do this?
    I realized that on the admin screen of Nakisa: Hierarchies -> DataConnection ->  Organization Structure-> Data Connection: there is a BADI called  "BAPI_3_DataSets_O2O"  But I can'T find this BADI in the system
    I also noticed that probably this budi uses the HCM_GET_ORGSTRUCTURE_AS_XML fucntion module toget the org. data, but there is no object  in the  " where used list"  of this FM...
    Please help
    Thanks
    N.G.

    The best way to find the used BAPi is the RFC trace (ST01 trasnaction)

  • Re: Depth of Evaluation for Standard Evaluation Paths (Bottom Up Approach)

    Hi All,
    We are facing a unique issue when using OOSP and defining evaluation path. for e.g. we used the standard SBESX (Staff assignments along Organizational structure). We also defined the following fields to test the Org structure results for a user's structural authorization on what he/she can see (e.g. Org unit(O), Positions(S), Users(P))
    1. Object Type = O
    2. Evalutaion Path = SBESX
    3. Status vector = 12345
    4. Depth (D) = 5 (which defaults to 1 automatically if we set the sign field to -(negative) for Bottom-up approach (displaying org structure bottom to up)
    5. Function Module = RH_GET_ORG_ASSIGNMENT
    6. Key Date = D
    The issue we have is for the above settings on OOSP Depth field defaults to 1 everytime we use the Bottom up approach (i.e setting the Sign field to - (negative)). Has anyone encountered the above problem with the depth field? Let us know if you had any fix or you had to escalate this to SAP?
    Best regards,
    -Murali

    S0003562672 wrote:>
    > hi murali,
    >
    > I cannot give you an answer on why exactly the depth filed is defaulting to 1 when using the negative in the sign fields (T77PR-SSIGN).  but can you perhaps explain what you're trying to accomplish with your structural profile.  in that case, maybe I/we can figure out a way to circumvent the use of the sign field...
    >
    > Edited by: Dimitri van Heumen on Mar 19, 2008 2:24 PM
    > (typing errors)
    Thanks for your reply Dimitri.
    Here is what we are trying to acheive with the Org structure below:
                                                                          O - 00001004
                                                                            S - 00000253
                                      O - 00001005                                                O - 00001006
                                           S – 00000251 hradmin1                               S – 00000256 essuser2 (120)
                                           S - 00000252
                   O - 00001007                   O - 00001008                     O - 00001009          O - 00001010
                   S - 00000257                     S - 00000259                     S - 00000260(121)    S - 00000254 (122)
                   S – 00000258  essuser1                                                                            S – 0000255 hradmin2(114)
    Position # 00000255 (far right down below in the above Org structure) is the HR Specialist for (Org #00001006 and Org #00001009).  Employee # 114 (far right bottom) has been hired into this position 255. They should be able to see Employees 120, 121, 122 and themselves(114).
    We have created a structural profile for the user hradmin2(114) and attached him to a role which has ess/mss functionality. We are trying to use the evaluation path SBESX to test what org units, postions and users this user hradmin2(114) can see which should meet the requirement stated above that he should see 120,121,122 and 114 themselves.
    So from the Org structure above it is a bottom up scenerio where hradmin2 must see org units 00001010, 00001009 and 00001006 and whenever we set the sign field to -ve (bottom up approach of displaying org structure) and depth of lets say 4 it automatically defaluts to 1 and when we check hradmin2 authorization profile in oosb we only see org unit 00001010 being displayed and not the org units above it for this bottom up approach.
    Are you aware of any methods to acheive this for the org structure above?
    Thanks
    -Murali
    Edited by: Murali Sripadam on Mar 19, 2008 1:47 PM

Maybe you are looking for