Evaluation version for "Base Deployment Engine " available?

Hello,
we have one "Development-version" to develop testplans.
Now we are creating a cutom OPUI that calls the teststand-API. It works fine with the "Development-version".
Normally it should be enough to just install the "Base Deployment" to compile and use our custom OPUI.
The price is ~500EUR for the "Base Deployment"
Question is now:
Is there an evalution-download available to check if i can use our custom OPUI with the "Base deployment"?
I only find an evaluation-download for the full "Development-version"
Thanks

Deleting the license files will have the same effect as having an evaluation license, that's correct. Edited: Actually, deleting the license file will only trigger evaluation mode if the original evaluation license files are on the machine. This would be the case for a clean install, but may not be the case for OnlyOne's install. In that case, deleting the license files would just cause TestStand to not open.
However, my interpretation of the question (please correct me if I'm wrong, OnlyOne), is that he was wanting an eval version of base deployment so that he could confirm that his OI would work with a base deployment license. If that's the case, I think it's an equally accurate test to use an activated Base Deployment license.
Daniel E.
TestStand Product Support Engineer
National Instruments

Similar Messages

Run sequence with base deployment engine

I have a basic Teststand 4.2.1 sequence file that takes some data measuremts and records the results to a file. This sequence runs fine onthe development system and now I want to deploy this to some other deployment workstations. I can run the deployment utiility and create an installation package. The deployment installes on the deployment workstations and I can configure the teststand base deployment engine license.
When I try to run my deployed sequence file, it always tries to run the full development version of teststand. Since only the deployment version is licensed, I get stuck at prompt for the temporary 7 day evaluation. If I remove the teststand development evaluation licence, the sequect fails to run saying there is no license available.
How do I set my sequence to run under the base deployment engine license. I don't have any fancy custom interfaces. I just want the default teststand interface to run the sequence file in read only, no editing mode.

Hi glsimpson,
You won't be able to use TestStand Sequence Editor to run your sequences. You can use one of our pre-built UIs that installs with TestStand. Please see Chapter 14 of the TestStand reference manual. This has several examples of Deploying TestStand system. Also you can take a look here for more information on TestStand licensing.
Cheers,

Does TestStand 2.0 have a user manager accessible through the base deployment engine?

I only see API calls to show add and edit users for the base deployment engine, but not a full user administrator like in the Sequence editor. Is this only available with the TestStand development env?

Why do want to be able to edit users on every test station. You can make life simpler by putting your users.ini file in a network location and from Station Options>User Manager, point to that location. That way you only have to add users once and you can do that from the development system. Even if there's a reason to have different users for different stations, you could just copy the different users.ini files you create to the local TestStand directories on the test stations. I do that with the StationGlobals.ini file. I find it easier to have of my test stations use the same station globals. I define the unique ones as sequence file globals. When I do have to add a new station global, I take my local copy of StationGlobals.ini and just do a c
opy to all of the test stations. Personally, I much prefer the fact that users and station globals can't be edited by the operator interface. That's just one less thing I have to worry about the test operators getting in and changing something.

Evaluation version for Duet Enterprise

Hi ,
i am looking for evaluation version for Duet Enterprise product , iam meanly microsoft oriented so i have problem in configure Duet Enterprise in SAP side is there any ready build VM which can help me in checking product

Hi Yomna,
Duet Enterprise is an add-on to both SharePoint 2010 and SAP NetWeaver 7.02; with additional SAP landscape behind that (e.g. SAP ERP, SAP HR, CRM, or so)
A simple VM with e.g. SharePoint and the Duet Enterprise add-on to SharePoint is thus insufficient; you can only evaluate Duet Enterprise if you also have a proper SAP landscape available.
Best regards, William.

Any way to test teststand deployment without base deployment engine?

Hello,
I am currently working on a teststand/labview program for the manufactuerer for my company. I would like to test the deployment files I have created but we do not have a base deployment engine license. Is there a way to get around this for testing purposes? I would like to be able to deploy this to a PC without the teststand/labview development system since that is what I will be deploying it to eventually.

Once you have created you deployment image you can deploy this on any system. Obvious you will not beable to test this if you haven't
a) already deployed the teststand runtime engine and user interface
b) and also the LV RTE.
But you can check that files should go to the desired location and that you have all the expected files.
But also you should a one deployment licence with the Developement TestStand System you brought.
Regards
Ray Farmer

Labview evaluation version for linux

Sir i need evaluation version of labview for linux. kindly provide me
hyperlink if any, other wise provide send me CD for evaluation, if
feasible.
My postal address is
Murad Ali s/o Bagh wali
village and p.o babuzai.abakhel.pulha
distt and tehsil Mardan, NWFP, Pakistan
regards

Unfortunately, we do not currently offer an evaluation version of LabVIEW for Linux. We do offer evaluation versions of LabVIEW for Windows, so if you have a Windows system available, you can evaluate LabVIEW there. With the exception of a few Windows-specific features, the Linux version of LabVIEW is identical in both layout and functionality.
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

Cisco ACS Server . Download Evaluation Version For Testing.

Hello.
I want to try to install ACS server for windows to check how this is working with Microsoft AD. Does anyone know where i can download an evaluation version of Cisco ACS Server for Windows ?

Hello Michael-
The ACS version for Windows is no longer available. The product is EOL/EOS:
http://www.cisco.com/c/en/us/products/collateral/security/secure-access-control-server-windows/end_of_life_notice_c51-664639.html
The product was replaced with a Linux based version (5.x) and it is a lot easier of a product to install and manage.
If you want to evaluate the product I would recommend that you contact your local Cisco partner:
https://tools.cisco.com/WWChannels/LOCATR/openBasicSearch.do
Thank you for rating helpful posts!

Need help with activating student evaluation version for 30days

Hello,
Today, I downloaded the NI multisim student evaluation version from here
http://www.ni.com/gate/gb/GB_ACADEMICEVALMULTISIM/US and the installed it. There is a pop up saying 7 days remaining but I don’t have a serial number to activate it.
Can someone explain me where and how to get the serial number to get 30days evaluation version.
thanks.

Hi there,
You don't need the serial number to activate it. After 7 days, you need to create a profile to extend and continue the rest of the days.
Regards,
Chen_T
National Instruments

Java RTS 2.1 Beta free evaluation release for Solaris and Linux available

Hi:
I would like to notify this forum that a free evaluation release of
Java Real-Time System (Java RTS) 2.1 Beta is now available for downloading
at our public web site.
Supported platforms are Solaris/SPARC, Solaris/x86, and Linux/x86 with
real-time POSIX APIs. The specific Linux distributions which this release
has been tested on are: SUSE Linux Enterprise Real Time 10 (released)
and Red Hat Enterprise MRG 1.0 (beta). As for the Solaris versions,
both Solaris 10 Update 3 and Update 4 are supported.
The URL for the web page where to start in order to be able to get to
the download link is:
http://java.sun.com/javase/technologies/realtime/rts/
The download link will be presented to you after you fill out a quick
survey and agree with a click-through, 90-days e-license.
The latest version of the Java RTS Beta technical documentation
bundle included with the product is being separately maintained at
our public website and can be accessed starting from here:
http://java.sun.com/javase/technologies/realtime/reference/rts_productdoc.html
Thanks,
-Carlos
Carlos B. Lucasius
Java SE Embedded and Real-Time Engineering
Sun Microsystems, Inc.
http://java.sun.com/javase/technologies/embedded/index.jsp
http://java.sun.com/javase/technologies/realtime.jsp
http://java.sun.com/javase/technologies/realtime/faq.jsp
http://developers.sun.com/learning/javaoneonline/j1sessn.jsp?sessn=TS-1331&yr=2007&track=5
http://developers.sun.com/learning/javaoneonline/j1sessn.jsp?sessn=TS-2901&yr=2007&track=5
http://developers.sun.com/learning/javaoneonline/j1lab.jsp?lab=LAB-7250&yr=2007&track=4
http://www.sun.com/training/catalog/courses/DTJ-4103.xml
http://www.youtube.com/v/xH1yUXd9krU
http://blogs.sun.com/jtc/
http://blogs.sun.com/delsart
http://blogs.sun.com/bollellaRT

Hello,
Just a quick question: can we have an official position from Sun regarding support of earlier releases of Solaris with Java RTS 2.1? Our customer is currently running Solaris 10 Update 3 with current Recommended patches, and the 2.1 beta cyclic driver supported this version of Solaris. However with the official release version of 2.1, support for U3 disappeared (only U4 and U5 are now supported). Aside from "rubber stamping" the Solaris build via /etc/release, is there a technical reason why U3 is no longer supported? As long as our kernel is up to date, can we safely use 2.1? Or is it just a case of being unable to officially support and test so many releases of Solaris?
Is this a general rule-of-thumb we can expect in future: only supporting the last 2 updates of Solaris 10?
Your advice is appreciated.
Thanks,
Dave.

Installation Evaluation version when waiting for licence

hello
I want to install evaluation version for my customer
But it doesnt work
He need to use it now and we didnt recieve the licence yes
Thanks

More information, please:
Operating system?
CC or CS6?
Exactly what do you mean when you say, "It doesn't work?"

Where to download PI evaluation version

Hi,
I was looking from where to download the evaluation version of SAP Netweaver PI 7 and also what components to download ...
Helpful answers will be rewarded

Hello,
There is no evaluation version for PI ...
So if you are looking for new features etc, then you can go with Ramp-Up nomination thru your company/customer... Hence you will be one of the few partners/customer who will have hands-on experience on SAP new products
However, if you want to try out, you can use SAP's HU6 sysrem and access info is given in below link:
Access the Enterprise Services Workplace Systems
Hope it helps,
Regards, Moorthy

Is SAP going to make PowerBuilder 12.6 Evaluation version available for the general public?

When is SAP going to update the link to download the evaluation version of Powerbuilder to reflect the latest version?

Last statement (2014-08-12) can be found here PowerBuilder new release available:
"The eval version should be available in the next couple of days"
So... it's like before .. a day is a week ... a week is a month ...a quarter a year... it's the SAP calendar.

Trial version of SAP J2EE engine and Development environment for Windows

Hello,
I am looking for a trial version of the SAP J2EE Development Environment and the corresponding SAP J2EE Engine for windows environment. I looked at the link https://www.sdn.sap.com/irj/sdn/nw-downloads. But the downloads are for the Linux environment. Are there any downloads for the Windows Environment.
Thanks for your help in advance.
Sumit Agarwal.

Hi Sumit,
Currently trial versions of SAP NetWeaver 2004 and 2004s (7.0) are only available for Linux.
Java EE development environment (the latest Java EE version - 5) trial versions for Windows are available in the [SAP NetWeaver CE download section|https://www.sdn.sap.com/irj/sdn/nw-ce-downloads].
HTH!
-- Vladimir

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Ve

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Verizon,en,US

Which phone model?

Creation of Runtime version for Knowledge base

We are using a Configurable material (CM1) with profile (P1) assigned to it. The profile assigned has the following details (in tx cu42):
. a. Config parameters Sales order
. b. BOM explosion Single level
As per SAP The Single-Level BOM Explosion setting is not supported when configuration Engine is used. But in our R/3 system, the configuration profile used has a setting for Single level BOM explosion (point b written above).
So while creating the Run time version for the KB (for material CM1), an error message comes Configuration profile P1 for material CM1 is invalid for Cause 1 - The setting is Single level BOM explosion
Please help how can the issue be resolved?

Hi Saurabh,
the only resolution is to change the configuration profile to multi-level explosion.
Michael

Evaluation version for "Base Deployment Engine " available?

Similar Messages

Maybe you are looking for