Evaluation version of Sun One Directory Server 5.2

Dear sirs,
We downloaded the Sun One Directory Server 5.2 from the following site:
http://wwws.sun.com/software/download/products/3ee79e69.html
After studying the License Agreement I actually wonder how long this evaluation software stays operational? May I use this software for operational purposes after I required the necessary license?
I look forward to reading your comments.
With best regards,
Fred

The bits are the same.
Definitely before you move to deploy Directory Server in production, you'll want to work out licensing and support with Sun.
Mark

Similar Messages

  • Sun ONE Directory Server Resource Kit Version 5.2.

    Anyone know where to download the Sun ONE Directory Server Resource Kit Version 5.2.

    There is http://wwws.sun.com/software/download/products/3eef9a29.html

  • Error installing Sun ONE Directory Server 5.2 under Windows 2000 SP3

    Hi,
    When I attempt to install the Sun ONE Directory Server 5.2 under Windows 2000 Server SP3, I get the following errors:
    Installing Sun ONE Server Basic System Libraries
    Installed:C:\WINNT\system32\icudt2.dll
    Installed:C:\WINNT\system32\icuin2.dll
    Installed:C:\WINNT\system32\icuuc2.dll
    Installed:C:\WINNT\system32\libadminutil52.dll
    Installed:C:\WINNT\system32\libadmsslutil52.dll
    Uninstalling C:\WINNT\System32\icudt2.dll
    Uninstalling C:\WINNT\System32\icuin2.dll
    Uninstalling C:\WINNT\System32\icuuc2.dll
    Uninstalling C:\WINNT\System32\libadminutil52.dll
    Uninstalling C:\WINNT\System32\libadmsslutil52.dll
    Uninstalling C:\WINNT\System32\libnspr4.dll
    Uninstalling C:\WINNT\System32\libplc4.dll
    Uninstalling C:\WINNT\System32\libplds4.dll
    Uninstalling C:\WINNT\System32\nsldap32v50.dll
    Uninstalling C:\WINNT\System32\nsldappr32v50.dll
    Uninstalling C:\WINNT\System32\nsldapssl32v50.dll
    Uninstalling C:\WINNT\System32\nss3.dll
    Uninstalling C:\WINNT\System32\sasl32.dll
    Uninstalling C:\WINNT\System32\smime3.dll
    Uninstalling C:\WINNT\System32\ssl3.dll
    Product Install Failed: java.io.FileNotFoundException: C:\WINNT\System32\libnspr4.dll (Access is denied)
    I've checked, and this file does not pre-exist under WINNT\System32.
    Any ideas why I'm getting this error? Is this a bug in the installer?
    Cheers,
    Scott

    IIRC this file, sasl32.dll, should get installed onto %WINDIR%\system32 when you install DS5.2 windows version.
    You may run WinZIP and File/Open "d52diu.zip" (DS5.2 zip image) and look for "nsbasesys.zip", double click to Open it and you should find "sasl32.dll" there.
    Gary

  • How to migrate Sun One directory server to a new physical server install

    need help
    We have to move our existing installation of sun on directory server 5.2 to a new physical server.
    We have a new physical server with a new host name. I am trying to find an easiest way to take a snapshot of our existing server and put it on a new installation
    So will installing sun one directory server , its shows me two choices either to create a new instance or copy configuration from a existing server
    What do i choose and which is the fastest route to replicate my old server
    Thanks a bunch in advance
    Sganb

    Hi,
    I'm glad you're still using the old, glorious Sun One Directory Server 5.2, because it brings me back a lot of memories... But are you seriously talking of the 'plain' version, with no patches/hot fixes on top? If that's the case, you're using of a software that has been developed in 2004 and released in Jan 2005! Just for you to be aware, in the last *8* (eight) years a considerable number (in the magnitude of 10^3) of bugs, security problems and performance issues has been identified and fixed...
    However, to provide a better answer to your question, it would be important to understand the 'big picture' in terms of scenario and requirements:
    1) Is this a critical 24x7 service for which you need to perform an on-line migration or you have a 'maintenance window' during which the service may be switched off?
    2) Is the old server member of replication environment? If yes, how many masters/slaves do you have already? Shall the new server be part of this topology? What role shall it have?
    3) Would it be possible to make the the old server able to communicate with the new server?
    4) How big is the database that you've got to migrate? Do you have any requirement in terms of caches?
    5) Do you take backups on a regularly basis and have in place working (*tested*) backup/restore procedures?
    6) Is the new server conserving or changing the O.S. and architecture? [SPARC->SPARC, x86->x86, SPARC->x86, Solaris -> ? , 32 .vs. 64-bit? ]
    7) What are the steps you did to 'install' the software on the new server?
    Thanks,
    Marco
    P.S.: I don't wanna sound 'scaring' with all these questions, neither this should be intended as an 'hidden advertising' for Oracle Professional/Consulting Services, but the only way to not put in jeopardy your data is being aware of the risks, having the control of what's going on and ... possibly have a 'B' plan ;-)
    P.S.S.: My last suggestion is to consider a migration to a later release AS SOON AS POSSIBLE; the latest is ODSEE 11.1.1.7, which is available here:
    http://www.oracle.com/technetwork/middleware/downloads/oid-11g-161194.html
    and seems to work pretty well ;-)

  • Backup of Sun ONE Directory Server 5.2

    Hello,
    I am new to Sun ONE Directory server and I installed a copy of version 5.2 on Windows 2000 server and want to ask for your help that how could I backup the LDAP server?
    Since there is tool for backup of data but how could I recover if the server instance is failed?
    Thanks in advanced.
    Pat

    Hi Pat,
    If you are new to the Directory Server, then it is recommended to study the documentation ;-).
    Chapter 4 of the Administrators Guide discusses the backup and restore procedures.
    See: http://docs.sun.com/source/816-6698-10/populate.html
    If you cannot start the directory server because the database is corrupted, then you may want to use the off-line restore tools (e.g. bak2db).
    Before you do anything, study the above chapter.
    Bertold

  • Migrate from Sun One Directory Server 5.1 to 5.2

    Greetings
    I am trying to run the script provided with the 5.2 release MigrateInstance5; I have installed the server and have followed the instructions to a tee. I keep getting the error, Unable to start the Sun One Directory Server, when I run the script, I am at my wits end as this is supposed to be the easy step, I have to go from 4.2 to 5.2 next.
    Please help.

    Hello,
    We upgraded our directory server version for several times.
    If you want a secure method.
    export your data.
    Copy your schema file to the new install path, modify the information related to the old version and server (also the last line containing db number : keep only lines about the schema entry, it's ACI, objectclasse and attributes) and restart your directory.
    Import your data. (you might use a script to clean your ldif file : empty attributes ...)
    For the upgrade from 4.2 to 5.2 you will have to work a little bit more on the schema file as you have two of them instead of one. but the idea is the same.
    edit your New schema file, keep only the following lines "
    dn: cn=schema
    objectClass: top
    objectClass: ldapSubentry
    objectClass: subschema
    cn: schema
    aci: ....
    aci: ....
    copy and paste your custom attributes and then objectclasses form the corresponding files.
    On the import phase, check that you are not using objectclasses whiche were modified or suppressed.
    I hope it was helpfull.

  • Migration of sun one directory server

    Hello All,
    There was sun one directory server is installed in windows server 2003..
    unfortunately the machine got crashed, but we have the whole folder structure(MPS) in the hard disk.
    Can any one help me how can i bring that server back with that files in another windows 2003 machine.
    i.e how can i configure the files and start the server.
    thanks in advance..
    regards
    Kishore

    I don't know exactly how is it in Windows environments, but in Unix if you have the whole product directories you only ought to copy them to other machine in the same directories, same owner, same permissions and it should work. I'm talking about DSSE 6.x, I don't know if for previous versions that's possible.

  • Help!! How to install and use Sun ONE Directory Server Resource Kit 5.2

    Hi ! Friend:
    I have some problem on install and use Sun ONE Directory Server Resource Kit 5.2, when I execute "java DSRK", afterwards something like this : com.iplanet.install.until.wbResource::gerstring:resource bundle"locale.resources.S1DSRKResource" not found appeared in the window ,that's why?
    Meanwhile ,can you give some data about it on how to use it ?
    Thank you !

    You should be aware of the following characteristics of your directory when using this tool:
    Size and number of entries.
    Directory structure and access permissions.
    Virtual attributes, class of service, and indexing.
    Usage, types of access, and access patterns.
    Post your error messages completely.
    Thanks
    --Britto                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

    Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
    I read the forum seeking for anwser and i get confuse
    Thanks for the help and sorry for any inconvenient
    Message was edited by:
    Aku_28
    Message was edited by:
    Aku_28

    I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
    Chapter 14 System Administration Guide: Naming and Directory Services
    Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
    Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
    Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

  • Migrating data from Sun ONE directory server into openLDAP

    Hi,
    I was to migrate the data from Sun ONE directory server into openldap. Has anybody done this or know about this. Can you please share the steps that needs to be done.
    NOTE: I have exported the data into LDIF file but when I run with ldapadd into the open ldap
    ldap_add: Invalid syntax (21)
    additional info: objectClass: value #1 invalid per syntax
    Are there specific schemas that i need. Where can I find them?
    Thanks

    Why would you want to migrate data into an OpenLDAP server ?Good Question, let me explain you my problem with Sun DS.
    No Question DS is the better product (even Red Hat realized this).
    Problem: DS is not a base Solaris 10 OS component, for patch support
    you need some additional plan, now sun marketing nightmare comes ;o)
    Every year service plans are changed (want a SJES or a DS or a DSEE ?)
    so use solaris with OpenLDAP, or linus with NSDS.
    Sun please give us a Solaris Core Component called LDAP Server (no need for trillions of entries).
    joe

  • Problems while installing Sun ONE Directory Server.

    Hi all,
    I'm a newbie to LDAP amd my problem is -
    When I started Installing SunONE DS on machine first time, at the end of the installation, it thrown an error message.
    "The program cant start because nss3.dll is missing from your computer. Try reinstalling the program to fix this problem."
    Later, I copied nss3.dll file to "C:\Windows\System32" and then started the installation then it thrown error again as follows -
    "Configuration of the Directory Server failed.
    Error Directory Server configuration failure
    Checking connection to the Configuration Directory Server... failed.
    The Administration Server cannot be configured.
    Error Administration Server configuration failure
    Error Configuration of the server(s) failed.
    Click Next to continue. "
    What is the reason behind this?

    Bingo, It worked. Yup, I'm using SODS 5.2, I have copied all .dll files from nsbasesystem.zip to "C:\Windows\System32".
    but now the problem is -
    Sun One Directory server service is running
    but
    Sun ONE Administration server process is not running
    I have tried to start it manually but it didn't worked. It initiates the starting of process and then suddenly shows error message that
    "The Sun ONE Administration server 5.2 service on local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."

  • Sun ONE Directory Server 5.1 SP1 crash

    A bug not present in the 5.1 without SP, only in SP1.
    Scenario:
    - Solaris 8 or Solaris 9.
    - Sun ONE Directory Server 5.1 SP1.
    - Changelog enabled with maximun age of 1 day.
    - Retro Changelog Plugin active (needed for the metadirectory access of cn=changelog).
    The LDAP crashes when:
    - You search for a changeNumber <= in cn=changelog and that search does not return any entry.
    Something like this will crash de LDAP server:
    ldapsearch -D "cn=Directory Manager" -w <passwd> -b cn=changelog "(changeNumber<=0)"
    Does anyone have experienced this?
    Any idea?

    No. You can try it.
    One with changeNumber, only with <= searches, only when the search does not return anything, and only when there has been, at least, a change in the database (that produced a changelog that it is not included in the search).
    I can�t belive nobody has experienced that.
    Do you think that all metadirectories use that kind of searches?. We use Critical Path.

  • Active Directory 2003 and Sun One Directory Server 5.2

    I just installed Sun One Directory Server 5.2 on a Linux machine. I want to configure LDAP on that machine so that it can be authenticated on Active Directory 2003. How do I go about doing this?

    Active Directory server is a "directory server" (and kerberos server.) If your linux client authenticates against Active Directory it doesn't have to involve the Sun Directory Server at all. You have several general approaches you could investigate:
    1. Linux client gets accounts and and authentication via LDAP from Active Directory
    If you use AD to handle unix LDAP authentication (opt 1) you may need to extend schema in AD to add the unix password field. I haven't tried it yet, but hope to.
    2. Linux client gets accounts from AD LDAP and authorization from AD Kerberos.
    There should be docs on support.microsoft.com on enabling kerberos support for non-Win clients.
    3. Linux client (with samba client installed, with winbind or pam_smb to support unix level services) gets accounts and authentication as a "Windows" client from Active directory "Windows server"
    Check the samba.org docn or forums- I think this is a pretty common solution.
    4. Linux client gets account information from Sun Directory server but uses kerberos (against active directory) for authentication.
    There should be docs on support.microsoft.com on enabling kerberos support for non-Win clients.
    5 Linux client gets account and authorization from Sun Directory server, which the sun Directory server configured to use Active Directory as a Kerberos server.
    Probably incredibly complex.

  • Sun ONE Directory Server 5.2 can install in WinXP?

    Good Evening all,
    l just download the Sun ONE Directory Server 5.2 for
    windows window2000 adv server. Is it possible install it in the WindowXP PRO?
    Because when l try to install then one message is pop up that :
    Thanks very much.
    Baobao

    Thanks for your reply.
    But when l tried to install DS5.2 in my WINXP ,
    it shown me the error message :
    cannot resolve name baobao.domain.com
    The installation cannot go on.
    Any ideas?
    Thanks and regards.
    BaoBao

  • How to encrypt password in Sun ONE directory server?

    Hi,
    I'm trying to perform an update to a password field in Sun ONE directory server using JNDI, but the stored password does not get encrypted by the directory server. I've searched the forum, and only found examples on how to do so for Active Directory. Please help.
    Thanks

    You didn't make mention of setting up ssl on the server side, so search these boards for openssl. Some nice person uploaded an nice example of how do use openssl to do this.
    To get the ssl certs for the solaris-client ssl authentication ( tls:simple ) to work you will need to use netscape to connect to the ssl port to get the right format. There are comments in that same doc on how to do that.

Maybe you are looking for

  • Free iLife Apps Problem?

    Ok so I bought my iPod Touch 5g on September 11, 2013 brand new.  When Apple announced there giving away of iLife apps if you buy a new Apple product, I checked the app store to see if they were free.  They were free....i was very excited.  Since the

  • File Download error in IE7 in Webdynpro Abap

    Hi Guru, I am Sandeep , My problem is realated to file download from IE. When I use IE6 my code works fine on the PRD server , But when I use IE7 , it gives an error  " Internet Exlpore cannot download the file ". But it works fine on Quality server

  • Putting more than one picture on a component?

    Hey im creating an AI agent that wanders around a world and eat and drinks and all that in java. Each position in the world is represented by a JButton(at the mo). My problem is that i need to be able to show two or more pictures on the one JButton a

  • Data log directly from Norma 4000 power analyser rather than via Keithley 2700 data logger

    Hello fellow LabVIEW users My Norma 4000 power analyser is connected to my Keithley 2700 data logger from which it logs data via GPIB using the attached VI. Prior to making this VI I was not aware that the Norma 4000 could also log data values direct

  • Methods of passing parameters from servlets to servlets

    Hi all, Im new to Java servlets. After doing some read-up, I understand that parameters can be passed using request.getSession().setAttribute(). The other method is using hidden element as shown below: out.println("<form method=POST>"); out.println("