EVB3 not working in Logic 8

EVB3 plug in is showing up but there is no sound,im using logic 8
if I open it on an old project done in 7 it works ok.
could anyone help?
Nass

In KP2, the contextual menus do not appear just rolling over the mouse: you need to click, hold down the left button and then drag. If you left the button, the menus won't appear anymore.
In KP2 stand-alone you just click and roll the mouse.
Message was edited by: miCoqui

Similar Messages

  • Antares autotune 4 graphic mode does not work in Logic

    Has anyone found a workaround for the following issue:
    Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

    I haven't used AT in years, but I do still have AT 4.
    Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
    Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
    Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

  • GPO and RA plug-ins not working in Logic Pro 8.0.2

    I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

    There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
    I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
    I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

  • Reason rewire not working with Logic 9.1.8,Help!

    I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
    I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
    But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
    I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
    I've tried uninstall reinstall from 6.5 ,but still not working.....
    Can someone help.....This is suppose to be easy.....Thanks!
    2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
    See if the above link helps

  • TS4628 onscreen keyboard does not work in logic pro x

    onscreen keyboard has stopped working in logic pro x -  latest version.
    There is no indication of midi in or out on control bar when keys pressed.
    also, certain keys do register do not trigger from outboard keyboard instrument.
    when playing back tracks, the relevant keys auto depress on the onscreen keypad.
    audio output is fine on the system.  all keys on piano roll keyboard work fine.
    The onscreen keyboard works fine in garageband
    have reset all midi assignments in prefs.
    have reinstalled the program but the issue remains
    silvejon

    You have either installed a midi controller that is over riding things or you are running an iOS App that is interfering....
    Turn off all iOS devices to test for iOS App
    Delete CS prefs to test for conflicting Midi Controller issues...
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.

  • Plugins NOT working in Logic 8

    Here, the following 3rd party plugins are not working properly in Logic 8:
    - VSL Performance Tool v. 1.1
    - NI Kontakt Player 2 v. 2.2.3

    In KP2, the contextual menus do not appear just rolling over the mouse: you need to click, hold down the left button and then drag. If you left the button, the menus won't appear anymore.
    In KP2 stand-alone you just click and roll the mouse.
    Message was edited by: miCoqui

  • Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

    Hi,
    I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
    I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
    Any clues why this is happening ?
    I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
    I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
    This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
    The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
    I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
    Thanks.

    Hi Blaze,
    I tried your settings, but no change, the Remote SL is still frozen showing :
    "Logic Automap" on the left LCD .
    You mention setting "Mixer View 64" well the parameter I see is called :
    "Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
    Thanks.

  • Behringer UCA200 not working with Logic

    I recently received a Behringer 1222FX mixing board for christmas. It came with a UCA200 which is a little RCA-USB product. I want to use this board with Logic 9 but i can't seem to get it to work. I added a track and selected Input 1 but when i hit record the only sound that was recorded was from the internal computer speakers.
    I have already tried the board with Garageband and it worked fine. I was wondering if anyone would steer me in the right direction and help me get this to work with Logic.
    Please note that this question maybe simple to answer as I am new to Logic.
    Thank You

    Chance has it I just tested the UCA-200, and its' quality is very clearly inferior to my ancient Macs' built in 16 bits audio. So don't use it, use the Macs' own built in audio instead. Chances are that the BIA of your Mac is 24 bits (which Mac do you have?), whereas the UCA200 is only 16 bits. That thing is only an improvement if you have an old PC with 8-bits audio. Sorry Uli (Behringer).
    regards, Erik.

  • Please help... jam packs not working with logic express 8

    my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
    You my also know that the jam packs work fine in Garage Band.

    Hi,
    on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
    However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
    You should do this not only now, but before and after every major update/change to your system.
    The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
    Fox

  • Does Group Region Select Edit not work in Logic 8?

    I've been trying to do automation edits across several tracks using group. I have everything except Pan selected. Doesn't seem to catch on. I've had it catch on before but it's hit and miss. Am I missing something or does it just not work right?

    Same here. I have seven channels of drums in comp tracks, and when grouped I am not able to edit the comps. All relevant parameters selected on the group settings, as far as I can tell. Other group functions seem to work fine.
    I am able to select one region of each comp track. If I do more, the whole track greys out. If I try too many times, Logic sometimes just crashes.
    However, the edits I try to make seem to be recorded in the edit history.

  • Why is my evb3 not working. its showing up and loading patches but no output?

    hi folks my evb3 organ is not working. it loads up and loads patches but no sound is output??? all my other instruments are working tho ??  any ideas please dudes??

    The evb3 is multi tembral. Set the instrument channel to 1,2, or 3 for the upper, lower or pedals.

  • Melodyne 2.6 not working with Logic 7.1.1

    Hi,
    those of you who are using Melodyne with Logic and Tiger, does it
    work with the Bridge mode ?
    I've been trying it now with several different takes and all I get
    out of it is sort of a hummingbird like a whistle
    or pigs been strangled..take your pick..is it just me ??
    It's the 2.6.0.6 Bridge version with Logic 7.1.1 and Tiger 10.4.2.
    Thanks

    Wll first answering my own question I may have found out the culprit.
    After launching my mLan auto connector and looking at MIDI/Audio set up I found that even Logic was working allright with my 01X though it still insisted I was using Internal audio instead of mLan. After changing that, the first and so far only test, I was able to use Melodyne OK.
    Otherwise I repeat what others already said here that although Logic lists Melodyne 2.6.0.6 as incompatible it will work.
    I guess now that v3 is due out in about a month we'll never see the 2.6. updated to fully work with Logic 7.

  • MIDI keyboard suddenly does not work in logic

    Well, I bought a new keyboard over the weekend because guitar center was having its sale.
    Thing is, I have already tried it out, and it worked. It is connected to my PreSonus firebox, and I cant for the life of me figure out why it isnt working anymore. It turns on, it plays through the keyboard's internal speakers if I turn the volume up, it is connected to my audio interface, and logic plays tracks through it just fine. The only thing is that my keyboard isnt working as a controller. I have checked all the connections, restarted logic multiple times, and turned everything (except my macbook) off and on. Nothing.
    So I went ahead and pulled out my old keyboard which I have not attempted to sell yet, and it didnt work either. So either there is something very simple that I am overlooking, or there is a problem with the MIDI cable, or with the jack on my firebox.
    Any ideas? I'm hoping that I'm just being stupid...
    Message was edited by: Ravich

    Ah, it is a MIDI keyboard without an interface, so you send midi to the Presonus, which I think also has MIDI, right? Is there no setup software for the Presonus?
    The fact that your Keyboard doesn't have its' own (USB-) midi interface, means that it will not appear in AMS - the Presonus MIDI ports should show up. You can create the keyboard in AMS though, and cable it to the Presonus MIDI. Just click "Add Device" and fill in the correct info.
    And trying a different MIDI cable may be a good idea as well.
    And check the Presonus for switches that may be in the wrong position.
    That's all I got for you now...
    regards, Erik.

  • Digidesign Core Audio not working in Logic pro 7.1

    Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
    "Audio device has been removed" (press OK) then
    "Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
    Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
    It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

    Check the FW cable.
    Anyway about compatibility Digidesign says this:
    Mac OS X 10.3.9 Not Supported
    With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
    cheers
    rob

  • Volume Automation Not Working In Logic

    So, I have been doing some audio work with about 12 different tracks or so and at certain points, I need to use automation to completely lower the volume at certain points to infinity. Yet whenever I listen to the track, on some tracks, the volume automation will either ignore those points when it's supposed to go down to -infinity, and stay at 0 dB. Or conversely, sometimes it will go down to -infinity and stay at that point when it's supposed to go back up to 0 dB.
    Does anyone know what's causing this or what could stop it? I'm using Logic Pro 8. Thanks!

    I'm having the same problem. (Sorta) Automation was working and now it's not. READ is on.

Maybe you are looking for