EVC and VLAN Stacking

Hi all,
I'm trying to configure a interface with two dot1q tags but I can't do it.
I think thats is because my line card doesn't support it but I can't find any doc to confirm it.
I have a 7606-S chassis with two WS-SUP32-GE-3B, one WS-X6548-RJ-45 and one WS-X6516A-GBIC.
When I try to configure a subinterface in any line module with the command "encapsulation dot1Q X second-dot1q Y" the router doesn't accept second-dot1q part of the command,
Router(config-subif)#do sh run interface GigabitEthernet2/1.2
Building configuration...
Current configuration : 38 bytes
interface GigabitEthernet2/1.2
end
Router(config-subif)#interface GigabitEthernet2/1.2
Router(config-subif)#encapsulation dot1Q 3 ?
native Make this as native vlan
<cr>
I tried it in a interface of each module and always is the same output.
After, I have tried to use service instance but I can't set encasulation under service instance configuration part,
Router(config)#interface GigabitEthernet6/5
Router(config-if)#service instance 1 ethernet
Router(config-if-srv)#?
Ethernet EFP configuration commands:
default Set a command to its defaults
description Service instance specific description
ethernet ethernet
exit Exit from ETHER EFP configuration mode
ipv6 IPv6 interface subcommands
mac Commands for MAC Address-based features
no Negate a command or set its defaults
shutdown Take the Service Instance out of Service
snmp Modify SNMP service instance parameters
The easy way is upgrade hardware but is not a choice now...
Anybody know if it's possible to do it with my hardware config?
Thanks in advance.
David.

Hello.
Yes, this kind of MPLS configuration is supported on SIP400, ES20/ES40 LC, but ES20/40 requires SUP720, so SIP400 is your only chose.
If you configure xconnect under service instance, you need SIP400 V2 SPA; if you configure under sub-interface -> just SIP400. In this case SIP400 is customer-facing LC.
Also you have an option to configure xconnect under interface VLAN -> SIP400 should be CORE-facing LC.

Similar Messages

How do I add a Subnet and vlan with a catalyst 3550 and RV120

Hello Friends.
I have a scenario that i'm hoping i can get some help with. I'll be as detailed and descriptive as i can.
This is for a business with 100 employees nodes and 100 camera nodes all needing IP internet through private addressing and public gateway.
I have a business class gateway with a private range of 12 public addresses. Ther modem does nothing but act as a gateway since i have disabled the firewall and DHCP.
In place of the firewall and DCHP from the modem i have installed a RV120 Firewall with VPN. When installing i replicated the IP scheme of the modem as to not disturb and distrup the devices assigned addresses from that scheme from the modem. I did this because the owner could not have any down time or any disruption to the business operations.
The RV120 now acts as firewall , DHCP , and VPN. I'll address the subnet first. I's using 10.0.0.0/24 subnet range.
DHCP is assigning 10.1.10.50 - 10.1.10.100 the rest are static and i plan to use static DHCP with the IP and MAC assigned to each static DHCP address.
There are 100 cameras with static IP addresses in the range of 10.1.10.11 - 10.1.10.40, and 10.1.0.1.101 - 10.1.10.170.
VPN uses PPTP assigned address 10.1.10.6 - 10.1.10.10.
There are no layer 3 switches that i know of. Just a layer two that is the primary swith and ports have run out, and various out of the box switches and wireless access points connected to the primary switch.
I want to implement subnets into the network and VLANS as well on a new Layer 3 switche from cisco. Thinking 3550 from Cisco or one of the older layer 2 switches with layer three capabilities.
I also want to introduce a 192.168.0.0/24 IP range for the existing wireless network and segment the traffic from the rest of the traffic on other ranges.
I want to replace the 10.0.0.0/24 DHCP alltogether and the static addresses for end user nodes on the same network, but keep that range just for camera nodes segmented.
I want to implement a NEW end user IP range and VLAN for employee/guest networks using the 172.16.0.0/24 range.
Iv'e thought of replacing all the wireless nodes with RV120's and use VLAN. Dont know if that strategy works. Need to think it through.
I want the 192.168.0.0/24 IP range comunicate to with the 172.16.0.0/24 and possibly the 10.0.0.0/24 range.
Any advice on how to do this?
As a side note the next step after this is to install a server domain controller as all the computers are all stand alones in their own workgroups. It's a simultaneous project that will introdue a DCHP, WINS, DNS server.

Hi Omid, it sounds like you're proposing the 3550 switch but you're not decided yet. The 3550 switch is a pretty old device and needs enhanced multilayer image. It may be more prudent to use a more current switch such as small business SG300 or SG500 as the feature set is more rich and it supports around 480 LAN connections.
To answer the inquiry, the RV120W, when you create a VLAN it will automatically create an IP interface. From this you may assign subnet as you like along with 'enable or disable' for inter vlan routing. Since the RV120W has this feature, a layer 3 switch is not required unless you are looking to keep the routing load smaller by routing locally with the switch.
With Catalyst or a small business switch you would need to create a VLAN. After creating the VLAN, on a Catalyst you can simply issue "switchport trunk encapsulation dot1q" on the desired interface and all VLAN will passage without issue. For a port connecting a user "switchport mode access" "native vlan xx" This will assign the port as untag member of the desired VLAN.
If using a small business switch, it is slightly different, you still create the VLAN but the command issue is a bit different "switchport trunk allowed vlan add xx" for the link to the router, where xx = the VLAN ID to tag to the router. For access client it remains the same as Catalyst.

The Script root.sh problem - ora.asm and ASM and Clusterware Stack failed

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. On step 9 of 10 - execute script /u01/app/grid/root.sh for 2 VMs rac1 and rac2.
After run root.sh in rac1 successfully. I run root.sh in rac2 and get an error as below:
[root@rac2 grid]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= ora11g
ORACLE_HOME= /u01/app/grid
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2012-03-05 16:32:52: Parsing the host name
2012-03-05 16:32:52: Checking for super user privileges
2012-03-05 16:32:52: User has super user privileges
Using configuration parameter file: /u01/app/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
Start action for octssd aborted
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on 'rac2'
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.drivers.acfs' on 'rac2' succeeded
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2664: Resource 'ora.ctssd' is already running on 'rac2'
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl start resource ora.asm -init
Start of resource "ora.asm -init" failed
Failed to start ASM
Failed to start Oracle Clusterware stack
[root@rac2 grid]#
As we see the output above, at the end of the output
1) Start of resource ora.asm -init failed
2) Failed to start ASM
3) Failed to start Oracle Clusterware stack
The runInstaller is in the first VM rac1. My question is:
Do any folk understand how to solve the script root.sh in rac2 problem ( 3 fails of ora.asm, ASM and Clusterware stack as above) ?
Thanks.

Please check there is no firewall exist:
try this like:
root.sh fails on second node
MOS note:
11gR2 Grid: root.sh Fails to Start the Clusterware on the Second Node Due to Firewall on Private Network [ID 981357.1]
Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1] (Most probabily this issue)

Logical network to physical network mapping (subnets and VLANS) in SCVMM 2012 R2

In much of the blogs, documentation and literature on VMM, there are examples of deploying multiple logical networks onto one physical network i.e. Cluster (logical) + Storage (logical) + Backup (logical) + Live Migration (logical) + Management
(logical) on top of Datacenter (physical).
Does this mean it would be possible to have one (physical) flat VLAN-less network with one subnet and then have all those logical networks (with subnets and VLANs) on top of it? Even with a simple unmanaged L2 switch that doesn't support VLANs itself?
If not, just how do you map multiple logical networks to just one physical network? How does that work in practice? Is a L3 switch needed to route traffic between logical networks for example?

Hi. VMM Networking may be overwhelmed for the most, at first. But you really need to understand the modeling here and how things are related to each other. Especially if using NIC teaming in WS 2012 (and R2) together with this mix.
I suggest that you read the following whitepaper where we explain how to setup networking in VMM (also to support network virtualization, but that is absolutely not mandatory): http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Java and abap stack connection

Hello,
how to check connection b/w Java and ABAP stack.
I am getting below error :
SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
We did some upgrades of kernel and jvm and started getting this error.
Please suggest

Hi,
Check this threads
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE . Pls help
Regards
Ramesh

ABAP aND Java Stack

Whats the use of an ABAP and Java Stacks in XI? What exactly they are doing for XI?
Thanks.

Hi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh

Abap and java stack together gives error message...

I am trying to install abap stach and java stack together.
I installed abap was without problem but when I install Java i get the error below.
I tried SP09 and since it didnt work Sp07 also since I had it with me downloaded before.
Any help ??? Got stuck
I need to install together to practice webdynpro...
E:\NW2004sSP7_Preview\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\NW04S\WEBAS\ADA\control.xml
George
INFO 2006-11-30 15:10:12
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
ERROR 2006-11-30 15:10:14
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
INFO[E] 2006-11-30 15:10:13
FSL-02077 File system export (share) saploc does not exist.
ERROR 2006-11-30 15:10:14
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
THis error was gone when I used the registry cleaner for removing ABAp stack But now question is How do I install BOTH????
May be the instance number is the problem....
In old version of ABap stack we can enter the instance number .But not in SP 9 .Can we change here too?
E:\NW2004sSP7_Preview\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\NW04S\WEBAS\ADA\control.xml
This file holds the Key of the errors since it checks for the instance number which is given in the log as details.. May be we can change it....
In ABap STack install instead of files as in SP 07 they have created an image and may be this si the reason that
we cannot customize.I have to find a way in order to install it...

i found soltuion myslef THe lates WAS for abap is preconfigured and so its not suitable for abap-java multiple installation

PI Pipeline Doubt : Pipeline Steps in ABAP stack and JAVA stack

Hello
Can anyone please assist me with which stages steps of the PI Pipeline are executed on the Java or the ABAP stack.
Receiver Determination
Interface Determination
Message Split
Message Mapping
Technical routing
Call Adapter
Also can anyone please provide links relating to the PI architecture diagram describing it from ABAP and Java Stack Perspective and not from the Components perspective i.e. Integration Repository and Directory.
Thanks.
Kiran

Hi
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Message, Java & XSLT (under Imported Archives) mappings are executed at Java stack;
ABAP & XSLT (in ABAP stack) mappings are executed at ABAP stack.
PI Architecture look threads
Architecture
/message/5802842#5802842 [original link is broken]

ABAP STACK and JAVA STACK certificates

Hi Fiends,
I have requirement in which I want to use HTTP adapter to send message and apply security certificate. I got from sdn that if I wan to use http adapter with certificate than I have to install certificates in ABAP stack.
My problem is I had one scenario in which I am using BC adapter to send message with security certificate and for that I had applied certificates in java stack and its working properly.
My question is,
Is it possible to use Java Stack and ABAP STACK together..?
I mean is it possible to implement both of the above scenario in same xi system?

Hi Soni,
You cannot use the same certifcates wihch you installed in Java stack with abap stack. You need to install separealy on teh abap stack.
For HTTP communication you dont need to install certificates. You only need when you want to use HTTPS communication. So if you want to use HTTPS communication and want to use SOAP adapter then you can use ther certifcates which is already installed on java stack. But if you want to use HTTP adapter then you need to install in ABAP stack.
Please see this hlep on how to install on the java stack and the process behind it:
http://www.i-barile.it/SDN/EnablingSSL&ClientCertificatesOnTheSAPJ2EEEngine.pdf
Also check this help:
http://help.sap.com/saphelp_nw04/helpdata/de/14/ef2940cbf2195de10000000a1550b0/content.htm
on abap stack check seshus response:
HTTPS enabling
Regards,
---Satish

Java Stack and ABAP Stack

Hi Experts,
i am now confused about these two stacks: Java Stack and ABAP Stack.
for IR objects, like DT, MT, SI, MM, SM, Action, Process Integration Scenario
for ID objects, like profile agreements, receiver determination, interface determination,
1. where are these objects stored in? Java or ABAP stack?
and i know Adapter Engine is run on JAVA Stack while Integration Engine is on ABAP Stack.
2. how do they call the objects stored in different stack during processing?

Hi,
1. where are these objects stored in? Java or ABAP stack?
These objects are basically developed on the JAVA stack, when they are activated their runtime version is created on ABAP stack, which you can check in SXI_CACHE transaction.
2. how do they call the objects stored in different stack during processing?
Runtime versions of these objects are responsible for the execution of the interfaces.
-Supriya.

Errror in RFC connection between SCM ABAP stack and JAVA Stack

Hi All
we have installed SCM Abap stack and SCM java stack on same system within single database.when i create rfc connection AI_RUNTIME_JCOSERVER from SCM Java stack to SCM Abap Stack its working fine,but when i am configuring same from SCM Abap to SCM Java using SM59 its giving error.
Error Details     Error when opening an RFC connection
Error Details     ERROR: failed to open file G:\usr\sap\SCD\DVEBMGS00\data\sideinfo.DAT
Error Details     LOCATION: SAP-Gateway on host OPS20SCD1.Octal.pet / sapgw00
Error Details     CALL: fopen
Error Details     COMPONENT: SAP-GW-LIB (ReadSideInfo)
Error Details     COUNTER: 1854
Error Details     ERROR NUMBER: 2
Error Details     ERROR TEXT: ENOENT: No such file or directory OR: The system cannot find the fi*
Error Details     MODULE: gwxxside.c
Error Details     LINE: 274
Error Details     RETURN CODE: 451
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Is it compulsory to create RFC connection between abap and java installed on the same system.
plese suggest.
Regards

to configure acceptance of the ABAP (integrated ITS / WebGUI) saplogonticket on the java stack, just log into the java stack (http://FQDN:50xxx/nwa) and select configuration THe last item in the list is Trusted System... click.
on the ensuing page, click on the add trusted system button --> by querying trusted sytem.
Enter the required data on the page:
system type: ABAP
host name: FQDN
System Nr: your instance number
client (of the productive client)
and a username and pw with superuser priveliges in the system (SAP_ALL/SAP_NEW, etc).
the click next
On the final screen, click finish.
You have now SSO setup between the ABAP and Java stacks. To configure SSO to accept java saplogontickets on ABAP see:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b0310d6-0801-0010-3185-b2371a280372
This should resolve your question.

How is the interface between the Java Stack and ABAP stack is achieved?

How is the interface between the Java Stack and ABAP stack is achieved?..Please send me the answer to [email protected]

Hi,
By interface, I assume you mean the connection between the ABAP and the Java stacks in a double stack system.
The connection from Java to ABAP is through JCo connections defined in the WebDynpro section of the J2EE start page. So Java to ABAP requests are processed through JCo.
The connection from ABAP to Java is through RFC connections defined in TA SM59. The ABAP to Java requests are processed through RFC.
Refer https://dsd.esco-salt.com/StartPage/documents/integration/3.html for detailed explanation.
The UME can be maintained in either ABAP or in JAVA depending on the persistence.
Refer: http://help.sap.com/saphelp_nw70/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm
Check UME data source configuration.
Some quick FAQs can be found at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad47eb90-0201-0010-7cb2-ddfa5ed879ec
Hope this helps.
Best Regards,
Srividya.R

Doubt about JAVA stack and ABAP Stack

Good day!
Hope can help me with my next doubt. I understood that BI JAVA or JAVA has been embedded in the Java support package stack for portal. But for BI7 the installation for JAVA is by sps. We only use pure support package for BI7, we don't use support package stacks and we don't use JAVA. I'm not sure because i don't made the sap installation in our enterprise, how can i be sure if we have installed java in BI7 and if we don´t have installed, should I install Java in our sap system? what are the benefits and consequences if I decide install it? and what is the difference about BI java (portals) and JAVA stack for BI7?
I try to find some information but I found some information about bi Java for portals, but not for BI.
Ramón Sánchez

Hai,
BI-7.0,JAVA:BI-Java is used to provide the Java runtime for scenarios such as Enterprise Reporting, Query, and Analysis as well as Business Planning and Analytical Services.BI-Java requires AS Java and Enterprise Portal Core and EP in the same system. Optionally, you can combin with other usage types in one system. Usually, scenarios running on usage type BI-Java also require usage types BI and AS ABAP. While installing BI-Java, AS Java, EPC and EP get installed automatically. Usually, when running on usage type BI-Java also require usage types BI and AS ABAP, you should be aware that no matter if you run BI and BI-Java in the same or in separate systems, both BI and BI -JAVA should be kept in sync in terms of Support Package Stacks.
BW 7.0 is now called as BI 7.0. There are many differences between them in areas like extraction, EDW, reporting, analysis administration,etc.,
http://www.ittestpapers.com/articles/987/2/SAP-BI-70-Features/Page2.html
Advantage of having Double stack Instance: Where AS ABAP provides the complete technology and infrastructure to run ABAP applications and AS JAVA provides Java Enterprise Edition environment for developing and running Java programs.
Regards,
Yoganand.V

Installing Java Stack and Abap Stack, same machine.

Hi all:
Does anybody installed Java Stack and Abap Stack on the same machine?
I installed ABAP stack first, and am trying now to install Java stack but it seems like at the end of the process, ABAP stack. (is not working now).
Any idea?

Not sure about installing both as I haven't tried either!
Anyway, in theory if the SIDs and instance numbers are completely different, then you should be OK. If you ahev the same SID or instance number, I can see possible problems,
Portal only runs on Java, so in theory any Java system will be OK. NWDW would be a good choice.

JAVA Stack and ABAP Stack not in Sync

Hi,
when i logged into the MI Server(7.0) gonr thru the following navigation :
Administration-->Mobile Infrastructure---->Mobile components
which i click on the search button i am getting the following error
"JAVA Stack and ABAP Stack not in Sync"
Already i redeployed the sapjra.rar, still i find the error unchanged.
Any help on this would be great........
Thanks,
vijay.

Hi
Refer this link
Need to Configure MI Server 7.0
As explained by veeraragavan in this link follow these steps
Following are in brief the roles required, just forward the same to your BASIS administrator.
In the ABAP Stack -Under Transaction SU01:
End User:
SAP_MI_SERVICE
Administrator / Critical Developers:
SAP_J2EE_ADMIN
SAP_MI_ADMIN
In the J2EE Stack - Under Identity Management:
End User:
No role required. You can give a role for display: SAP_JAVA_NWMOBILE_ADMIN_READONLY
Administrator / Critical Developers:
SAP_JAVA_NWMOBILE_ADMIN_SUPER
regards
Manohar
Edited by: Gouri Manohar Gadhamsetty on Jan 19, 2009 7:17 AM

EVC and VLAN Stacking

Similar Messages

Maybe you are looking for