EVDRE - 'ALL' Keyword in Expand range not working when using ParentH2

Hi experts,
I am using a second hierarchy in my P_ACCT dimension (ParentH2). When creating a report with the ALL keyword in expand range (MemberSet) to show all members under P&L an error occurs (EVDRE cannot retrieve data). Without having the second hierarchy in the dimension the report works fine.
Did anyone of you experience the same problem before? Is there a solution?
Thanks in advance and best regards
Felix

Hi Sanjeev,
thanks for your advice!
Processing the dimension works without any issues.
In the second hierarchy there are about 400 members (knodes and basemembers). That's roughly the same number of members as in the first hierarchy. Is there a known issue with the system when using the parentH2 property for that number of members?
Thank you and best regards
Felix

Similar Messages

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

Why does diadem intellisense not work when using scriptinclude or for global object

I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.

Here is more information on the issue.
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
'Test.vbs
class test
    public function test1()
         msgbox("test1")
    end function
    public function test2()
         msgbox("test2")
    end function
end class
'now create a object of the class
dim oTest
set oTest=new Test
'now when you type oTest. you get the following functions to choose from
oTest.test1
        .test2
Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
'Main.vbs
Option Explicit 'Forces the explicit declaration of all the variables in a script.
call scriptinclude("c:\1atmp\Test.vbs")
dim oTest
set oTest=new test
'now when you type oTest. it shows none of the functions in the object oTest
oTest.

Microphone not working when using a phone call, Microphone not working when using a phone call

Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.

Hi Mike
That was very helpful thank you.
I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future. I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
Best wishes
Rob

Keyboard backlighting not working when using Windows in Boot Camp

Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

Elements 11 - Brush tool not working when using layer mask

My brush tool won't work when using layer mask in PS Elements 11. I also have Elements version 10 installed and there it works fine. If I do the exact same proces in version 11 nothing happens.
Is this a bug or has something changed in the proces?
Please help.
Thanks.

Make sure you have the mask thumbnail selected - it will be highlighted in blue.

Enter Key Not Working When Using Text Tool

For some reason, my enter key has stopped working when using the text tool. Instead of making a soft return to a new line, it simply commits the type. What is going on here?
I'm using a desktop and CS3.

there are 2 enter keys in key board
if u enter main key board enter, sentence will go to next line
In case u enter the key available in rightside of the key board , in the cluster of numericals, the type tool is committed.

Airport Express not working when used with Broadband Router **HELP!!!**

Hello.
I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
Is there a way to configure the router to see the AX?
Thanks for your help!

Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
Hope this might help someone.
Michael
iBook G3 (600 MHz) Mac OS X (10.4.3) D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

Function Key not work when using jre1.5

My application was based on JDK1.3 to develop and JRE 1.3 is using in the client side.
In the application, function keys are the shortcut and it is working fine based on the above setting.
Since JRE 1.5 is encouraged to be used in the future, we try to use it to run our application. But we find that all function keys are not working.
I am not sure the fact, but I get the following exception sometimes in the console:
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException
at javax.swing.LayoutComparator.compare(LayoutComparator.java:61)
at java.util.Arrays.mergeSort(Arrays.java:1307)
at java.util.Arrays.mergeSort(Arrays.java:1296)
at java.util.Arrays.mergeSort(Arrays.java:1296)
at java.util.Arrays.mergeSort(Arrays.java:1295)
at java.util.Arrays.sort(Arrays.java:1223)
at java.util.Collections.sort(Collections.java:159)
at javax.swing.SortingFocusTraversalPolicy.enumerateAndSortCycle(Sorting
FocusTraversalPolicy.java:119)
at javax.swing.SortingFocusTraversalPolicy.getFirstComponent(SortingFocu
sTraversalPolicy.java:425)
at javax.swing.LayoutFocusTraversalPolicy.getFirstComponent(LayoutFocusT
raversalPolicy.java:148)
at javax.swing.SortingFocusTraversalPolicy.getDefaultComponent(SortingFo
cusTraversalPolicy.java:502)
at javax.swing.LegacyGlueFocusTraversalPolicy.getDefaultComponent(Legacy
GlueFocusTraversalPolicy.java:131)
at java.awt.FocusTraversalPolicy.getInitialComponent(FocusTraversalPolic
y.java:149)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFoc
usManager.java:318)
at java.awt.Component.dispatchEventImpl(Component.java:3841)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Window.dispatchEventImpl(Window.java:1766)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.SequencedEvent.dispatch(SequencedEvent.java:93)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:234)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I try to compile my code using JDK 1.3 and 1.5. Actually, there is no compilation error.
Please help me if you know the fact or solution.
Thanks a lot!

The supported Software in iPlanet's Portal Server is JDK/JRE 1.2.2_07 and JDK 1.2.2_09(in SP4). Starting with JDK1.3.1_01, applets are handled somewhat differently. Enable Java and look at the error messages in Java Console to find why the Netlet is not loading in JDK1.3.1_02. The issue might be with two JRE's or with your cache setting. Hope this helps you.
Thanks,
Raj_indts
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

@EJB not working when used in Cactus ServletTestCase

Hi All,
I am running my tests using Cactus ServletTestCase servlet and testing my EJB from there. I deploy my EAR application (my test servlet is in WAR, EJB in EAR modul)
When I run the test, I got NPE as the @EJB is not working and EJB ref is not initialized. Strange thing is, the @EJB is working fine from any other servlet or POJO in WAR.
Test result:
<webresult>
−
<exception classname="java.lang.NullPointerException">
<message>null</message>
−
<stacktrace>
java.lang.NullPointerException
     at test.fenix.legalsubject.TestLegalSubjectController.testConvert(TestLegalSubjectController.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at junit.framework.TestCase.runTest(TestCase.java:164)
     at junit.framework.TestCase.runBare(TestCase.java:130)
     at org.apache.cactus.internal.AbstractCactusTestCase.runBareServer(AbstractCactusTestCase.java:155)
     at org.apache.cactus.internal.server.AbstractWebTestCaller.doTest(AbstractWebTestCaller.java:120)
     at org.apache.cactus.internal.server.AbstractWebTestController.handleRequest_aroundBody0(AbstractWebTestController.java:94)
     at org.apache.cactus.internal.server.AbstractWebTestController.handleRequest_aroundBody1$advice(AbstractWebTestController.java:218)
     at org.apache.cactus.internal.server.AbstractWebTestController.handleRequest(AbstractWebTestController.java:1)
     at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody2(ServletTestRedirector.java:102)
     at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody3$advice(ServletTestRedirector.java:218)
     at org.apache.cactus.server.ServletTestRedirector.doPost(ServletTestRedirector.java:1)
     at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody0(ServletTestRedirector.java:73)
     at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody1$advice(ServletTestRedirector.java:218)
     at org.apache.cactus.server.ServletTestRedirector.doGet(ServletTestRedirector.java:1)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:718)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
</stacktrace>
</exception>
</webresult>
my test class:
public class TestLegalSubjectController extends ServletTestCase {
     * Class under test
     static final Logger log = Logger
               .getLogger(TestLegalSubjectController.class);
     * TODO nemuzu to rozchodit
     @EJB
     public LegalSubjectController legalSubject;
local interface:
@Local
public interface LegalSubjectController extends ControllerFilter {
public LegalSubjectWizardData getByID(Long ID);
public void createLegalSubject(LegalSubjectWizardData legalSubjectWizardData);
public LegalSubject findByName(String name);
EJB implementation
@Stateless
public class LegalSubjectControllerBean implements LegalSubjectController, LegalSubjectControllerRemote {
private static final Logger log = Logger.getLogger(LegalSubjectControllerBean.class);
I am stucked with this one, dont want to use the EJB2 way with JNDI look up. Any suggestions much appreciated!

Was anyone ever able to figure out a solution for this issue? I'm having the exact same problem right now and this is the only reference to it I've been able to find online.
Thanks!
-Blake

EVDRE - 'ALL' Keyword in Expand range not working when using ParentH2

Similar Messages

Maybe you are looking for