EVDRE encountered error retrieving the data from web Server

Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thanks

hi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks

Similar Messages

EVDRE encountered an error retriving data from web server in PROD

Hi friends,
We are checking Evdre reports in BPC production system. We checked few application' EVdre input templates & reports and are fine.
But yesterday evening onwards we are facing below error message.
EVDRE encountered an error retriving data from web server. This message we are getting for all BPC applications in BPC production. There is no short dump in backend.
But when i checked in BPC developement there is no probelm.
We are on BPC7.5 NWsp04 and BI7.01.
In BPC, production,when i try to create evdre template(just after filling
information in evdre builder), immediately getting same error information.
I read few notes, did as per that but sill problem exists. In note, mentioned process dim of particular application and process application. Logout from bpc admin & excel. I did this and, that error message not received for upto 20min. After that i'm getting error. We checked communciation between ABAP layer and bpc, reset IIS also. Still same probelm exists.
Any suggestions pls.
thanks,
naresh

Hi frineds,
SAP OSS team resolved along with our basis guy.
Initially SAP supported notes:
1.1475233 and 1378705 Process all dimensions and applications.
2.1355954 Drop SAP temp tables.
3.1428764 confilict only if you use Oracle 10 g, if you don't, then forget it.
I used 1378705 and problem resolved temporarly, but still exists after 1 day.
There are different reasons for getting the error message. In our case, problem is at backend BW and, BW system running on HP unix OS.
Checked librfc32.dll in the
directory /usr/sap/BP1/DVEBMGS00/exe.
Executed the following MDX statment in MDXTEST transcaction, and it
executed in both the available instances.
SELECT
{[Measures].MEMBERS} ON COLUMNS,
[0MATERIAL].[LEVEL00].MEMBERS ON ROWS
FROM [$ZCO_CDPC].
Even i also don't have clue how SAP resolved this issue.
Regards,
Naresh

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

SQL Server Import Export Wizard fails while trying to retrieve the data from FastObjects Database

When trying to import data from FastObjects database to SQL Server 2008 R2 using import/ export wizard we get the following error message :
"Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
Clicked on View button, the source data is retrieved correctly.
Clicked on Edit Mapping button, the Import Export Wizard failed with the below error message:
===================================
Column information for the source and destination data could not be retrieved.
"Test" -> [dbo].[Test]:
- Cannot find column -1.
(SQL Server Import and Export Wizard)
===================================
Cannot find column -1. (System.Data)
at System.Data.DataColumnCollection.get_Item(Int32 index) at System.Data.DataRow.get_Item(Int32 columnIndex) at Microsoft.DataTransformationServices.Controls.ProviderInfos.MetadataLoader.LoadColumnsFromTable(IDbConnection myConnection, String[] strRestrictions)
at Microsoft.SqlServer.Dts.DtsWizard.OLEDBHelpers.LoadColumnsFromTable(MetadataLoader metadataLoader, IDbConnection myConnection, String[] strRestrictions, DataSourceInfo dsi)at Microsoft.SqlServer.Dts.DtsWizard.TransformInfo.PopulateDbSourceColumnInfoFromDB(IDbConnection
mySourceConnection) at Microsoft.SqlServer.Dts.DtsWizard.TransformInfo.PopulateDbSourceColumnInfo(IDbConnection mySourceConnection, ColumnInfoCollection& sourceColInfos)

Hi Chennie,
Thank you for the post.
Does the issue persists after you use the "Write a query to specify the data to transfer" option instead of “Copy data from one or more tables or views” option? If so, the issue may occur due to incorrect data type matching between the FastObjects database
data types and SSIS data types. In this condition, I don’t think it is necessary to upgrade the SQL Server version. Since you can open the Column Mappings dialog box, please try to modify the data type mapping manually.
In addition, the issue seems to be the same as the issue described in the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/09/09/sql-server-import-export-wizard-fails-while-trying-to-retrieve-the-data-from-pervasive-database.aspx
Regards,
Mike Yin
TechNet Community Support

Cannot retrieve the data from excel sheet

hi all ...
i am trying to retrieve the data from excel sheet and at the same time i am inserting the data into mysql database.
code is as follows
try{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); conn1=DriverManager.getConnection("jdbc:odbc:"+estr,"",""); Class.forName("com.mysql.jdbc.Driver"); conn = DriverManager.getConnection("jdbc:mysql://localhost:3306/"+ t_dsn ,"root","manager"); sql="select * from student_info"; srch2 = conn.prepareStatement(sql); rs1 = srch2.executeQuery(); String query = "select * from ["+einput+"$]"; String query1= "select count(*) from ["+einput+"$]"; st = conn1.createStatement(); rs = st.executeQuery(query); ResultSetMetaData rsmd = rs.getMetaData(); c = rsmd.getColumnCount();//gets the column count rs1 = st.executeQuery(query1); while (rs1.next()) //loop to get no. of rows { r = rs1.getInt(1); } rs = st.executeQuery(query); for(i=1;i<=r;i++){ rs.next(); for(j=1;j==c;j++) { a = rs.getString(j); b= rs.getString(j); d = rs.getString(j); } rs1.next(); PreparedStatement ps2 = conn.prepareStatement("insert into materials_out values(?,?,?)"); ps2.setString(1,a); ps2.setString(2,b); ps2.setString(3,d); ps2.executeUpdate(); } }catch(Exception e){ e.printStackTrace(); }
but it is showing error as :
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name too long
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3073)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:323)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at Outward_register.jButton2ActionPerformed(Outward_register.java:368)
at Outward_register.access$400(Outward_register.java:23)
at Outward_register$5.actionPerformed(Outward_register.java:312)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6038)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
at java.awt.Component.processEvent(Component.java:5803)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4410)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
at java.awt.Container.dispatchEventImpl(Container.java:2102)
at java.awt.Window.dispatchEventImpl(Window.java:2429)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
please help me ...

please help me ... The question has nothing to do with 'getting' data from excel and certainly not with putting it into MySQL.
The stack trace specifically tells you that your connection string is wrong.
It also tells you which connection string is wrong.
Which you can use to determine specifically which one is wrong. And which you did not provide that info to us.

Is there a simple way to retrieve the data from a resultset using JavaBean?

I have a result set from a select * from users where userid = xxx statement. However, at the moment I have had to hard code the remainder of the code to get the data from each column as I need the column name as well as its data.
I had read somewhere using java beans and reflection it is easier. But i do not know know how.
Is there a simple way to retrieve the data from a result set ?
thanks in advance-
kg

Well, it is not really simple. But there are Open Source components to simplify it for you. See e.g http://www.must.de/Jacompe.htm - de.must.dataobj.DataObject and its subclasses. Feel free to contact me if you have any questions: [email protected]

Reading the data from web

Hi guys ,
I am new to j2me ,i am going to start a project named onlineNews
for this project i need to read the data from web.can anyone help me with a sample code for reading a data from web
thank u for spending your precious time

that depends on the used technology on top of the web. I believe with J2ME you have access to the URLConnection class, so you can send HTTP requests manually. Otherwise you will need to use low level sockets, or use webservices such as SOAP or XML-RPC.
There is a lightweight XML-RPC client available for J2ME. It is no longer in development, but that doesn't mean that it doesn't work.
http://kxmlrpc.objectweb.org/

Regarding how to pass the data from web dynpro to workflow

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Check this [thread|SAP_WAPI_START_WORKFLOW;

How to pass the data from web dynpro to workflow.

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Hi
you can use function module
data   ls_input_container TYPE swr_cont.
data   lt_input_container TYPE TABLE OF swr_cont.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
    EXPORTING
      task            = ptask
    IMPORTING
      return_code     = lv_return_code
      new_status      = lv_new_status
    TABLES
      input_container = pinput_container
      message_lines   = lt_message_lines
      message_struct = lt_message_struct.
where you pass the data in imnternal table "pinput_container" as
ls_input_container-element = 'KUNNR'.
ls_input_container-value = ls_skna1-kunnr ."wd_this->lv_kunnr.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'CLUSER'.
ls_input_container-value = lv_cluser.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'BUKRS'.
ls_input_container-value = lv_bukrs. " youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VKORG'.
ls_input_container-value = ls_sknvv-vkorg. " youe value as per requirement
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VTWEG'.
ls_input_container-value = ls_sknvv-vtweg. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'SPART'.
ls_input_container-value = ls_sknvv-spart. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
*Also Forgot to mention where ptask is your workflow ID *
Regards,
Arvind
Edited by: Arvind Patel on May 14, 2010 7:38 AM

Is it possible to retrieve the data from maintainance view?

Hi experts,
Am facing one problem.
Is it possible to retrieve the data from Maintainance View ,If yes how?
IF it is not possible then Y?
While am trying to retrieve data from maintainance view it's showing message like
"it is not a database view or table".
Can u pls give me ans.
Thanks&Regards,
Arun.

Hi Arun,
It is not possible to retrieve the data from Maintenance view. Maintenance View is different and Database View is different.
Maintenance view : Maintenance view permits you to maintain the data of an application object together.The data is automatically distributed in the underlying database tables.
A standardized table maintenance transaction is provided (SM30), permitting you to maintain the data from the base tables of a maintenance view together.
In other words, Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Database View: Data about an application object is often distributed on several database tables. A database view provides an application-specific view on such distributed data.A database view is automatically created in the underlying database when it is activated.Database views implement an inner join.If the database view only contains a single table, the maintenance status can be used to determine if data records can also be inserted with the view. If the database view contains more than one table, you can only read the data.
Database views should be created if want to select logically connected data from different tables simultaneously. Selection with a database view is generally faster than access to individual tables. When selecting with views, you should also ensure that there are suitable indexes on the tables contained in the view.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to retrieve the data from Website and Upload it in SAP table?

Dear ABAPers,
I want to retrieve the data from website and upload the same in SAP Database Table is that possible.Please help me.It is very Urgent.
Thanks & Regards,
Ashok.

Dear Abhishek,
Thanks for your reply.But my requirement is not met.
If i execute the program it should retrieve the data from particular website.
Thanks & Regards,
Ashok.

Retrieve the data from Oracle (Superior difficult)

Dear all,
I want to retrieve the data from the table (TABLE A), in TABLE A there are a field call RANGEFROM, However, the data type of it is "VARCHAR2". But in this field, it can contain numeric and date. Now, I want to select this field in it by a SQL statement. I want the SQL statement like this:
"SELECT * FROM TABLE_A WHERE (to_date(RANGEFROM, 'mm-dd-yyyy')) <= 'Now()';"
However, the result of the SQL only display in VARCHAR2 mode. That mean it can't compare the result. so What can I do?
Thanks
null

As long as the input literal for formatting the date is in always like 'mm/dd/yyyy' then you may explicitly select the RANGEFROM field in your select list as to_date(RANGEFROM,'mm/dd/yyyy');
eg:
SQL> select to_date('01122000','mm/dd/yyyy') RANGEFROM from dual;
RANGEFROM
12-JAN-00
Also this is now good for comparison:
SQL> select SYSDATE - to_date('01122000','mm/dd/yyyy') from dual;
SYSDATE-TO_DATE('01122000','MM/DD/YYYY')
339.67455
Also the same technique could be applied in your where condition as well.
Good luck :
(12 month wait for a response is not good)

To retrieve the data from the database in variance of case

Hi,
I need to retrieve the data from database in variance of lowercase or uppercase in the select-options.

hi,
just write a normal select statement
with where condition
select *,....
where <databasefield> IN s_opt. (your select option field)..
This will fetch records your lower and upper limit..
is this what you are searching for?
If not , if specific for lower and then upper then use parameters and add in the intervals..
rewards if useful
regards,
nazeer.

Error while reversing data from SQL Server to ODI

hi,
I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022.
And now, I am getting the below error while reversing the data from SQL Server database.
0 : 08001 : java.sql.SQLException: No suitable driver
Looking for the assistance on the same.
Thanks,
Abhay

If everything is fine the reversing should be fine. I would say check again if the Technology of the Model and the also the dataserver is created under the right Technology in topology too.
also if this doesn't help , Please tell us the steps you have carried so far . Also can you try selective reverse is it showing the tables.

EVDRE encountered error retrieving the data from web Server

Similar Messages

Maybe you are looking for