Evdre error

Hi
Gurus
I have a input schedule which was working fine earlier 2 weeks ago.
all of a sudden it says "evdre retrieving error from we server" . its the same input template that ran well before.
only changes tha happened was
upload of new version data
inspite of the webserver and .net are on version 2, noth are in synch, enough memory left in the back end to run this application and the input template
within the template :
when the report was working fine  2 weeks ago
1. there was a hierarchy with 12000 members it was fine and now though we reduced to 885 members it still does have the error
2. there are no parent members that the data is being sent to, infact all the pull and send are formula oriented now
earlier it was a straight pull from the data base still it was fine
3. now itis taking 10 minutes and time out, yes we increased the run time to 17 minutes but that di not serve any purpose either.
we are on SAP BPC NW 7.5 SP7
thanks

I found the solution
finally after eliminating the row expansion it took less time without the error on EVDRE
i have taken out the Row expansion and used EVGTS instead
this reduced the runtime of the report from timing out to 3.55 minutes
but still one thing surprises me is ,
the report was working fine with all the original stuff there and there was no problem
suddenly it gave evdre error with retrieving from webserver
and after changing the structure it started working better
if somebody could explain why it could have been like this , 
all help and explination is appreciated
thanks

Similar Messages

  • EVDRE error on certain member from Dimension

    Hi,
    One of the template will have EVDRE error when selection this entity. Upon check, by creating simple EVDRE report, some new members from this entity cause the EVDRE error. The new members was just added to the dimension and no issue when running process dimension. We have open the dimension, save and re run the process dimension without any error but still have the evdre error when open the template with the entity. No issue with other entity For info we are running BPC MS 7.5 upgraded recently from BPC MS 7.0. Any help is very much appreciated.

    Hi Kheirudin,
    sorry from your description I didn't understand it was the same issue. If it is the same normally you're able to process the dim the day after.
    You don't need to raise to SAP, SAP has released one years ago, see please 1633966 - BPC MS: EVDRE encountered an error retrieving data from the Web Server, "Errors found retrieving data" .
    For my experience it's sufficient as workaround to update the date of the .dep files, without stop and restart of services as described in the thread of your last answer.
    Let me know if the workaround is clear or not.
    Regards
         Roberto

  • EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

    Hi guys.
    We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
    Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
    Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
    We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
    However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
    This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
    This is not the first time that we have seen this behaviour.
    I have experienced it in one other environment, which I keep meaning to rebuild.
    These installations are in completely different environments.  The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
    The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
    It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
    However, this is now far too coincidental to be the case.
    Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
    I could really do with a quick win on this one.
    Thanks

    Hi,
    i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
    My system is different:
    Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
    and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
    The issue appears in the last months.
    It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
    I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
    I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
    Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
    Could you verify if on some machine the evdre works fine and and that when you delete the  added member evdre starts to work?
    Kind regards
    Roberto
    Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM

  • BPC 7.5 NW - EVDRE error retrieving data

    Hello all.
    I have a problem with my BPC 7.5 NW system.
    I am working with BPC 7.5 NW SP07, and I did all the installation and configuration steps with both .NET and ABAP components.
    But when I try to execute an EVDRE, the system shows the next error message:
         "EVDRE encountered an error retrieving data from Web Server"
    I checked ST22 transaction and I saw that /BI0/02xxx tables are not created or activated. I checked these tables in SE11 transaction, and they don´t exist.
    I saw several posts and a couple of notes with this problem. They say that these temporary tables are needed to be created or activated, but I couldn´t see anywhere the way to solve the problem in case the tables are not created.
    Does anyone have any idea? What is the cause of this problem? Why these are not being created?
    Thanks in advanced.
    Best regards,
    Fernando

    1. Login into BPC for Admin
    2. Once logged into your Appset , open the Dimension library
    3. Process each dimension by selecting the "Process members from membersheet" and by unchecking the "Take system offline" option
    4. Process all the dimensions one by one not together.
    5. Once processing the dimensions is done then open the Applications and Modify each Application by adding or changing the Application Description.
    6. Once done modifying Applications then logout of the BPC Admin and BPC Excel.
    7. Login back again into BPC for Excel by going through the connection wizard.
    Ideally this should solve your problem and If all the dimensions are processed successfully then logoff and login to see if you stilll see the EVDRE error.
    Hope this helps.
    Regards,
    Sanjeev

  • Changes in hierarchy dimension members causes EVDRE Errors retrieving data

    Hi everybody,
    I am facing the problem while retrieving the data in Evdre  this is the following situacion:
    1. BPC 7.5 NW SP 08 is used.
    2. Suppose that you have a template where you defined SELF,DEP for an account dimension, you expand and refresh normally, and retrieved data OK.
    3. Your business case makes that you have to move one of the dependant member of the hierarchy  to another parent
       then you go to mantain dimension member and change the parent of  the member in question, finally you process dimension,  and put available set status.
    4. Yo re-open Template or refresh dimension members from the server in order to see update hierarchy in account dimension
    5. After expanding and refreshing the evdre, shows and error "...while retrieving the data.. "
    6. I suppose the way to fix it is to reverse the change in dimension member, so I change for initial parenth but error continue.
    What do you recommend  for fix it? is there any note which solve it?

    Hi Sabine,
    Hi Sabine,
    Thanks for your answer, we followed all the steps you suggested, but the problem continue,
    Could you confirm us what is the the path of that XML file of dimension thought BW - UJFS?
    The only thing that correct problem is doing the following but not should be the best way:
    1. Supress Account dimension in application
    2. Delete dimension
    3. Recreate Dimension and process it
    4. insert dimension into application
    5. Refresh Evdre and then works fine!
    Is there any Sap note about it or something else to check?
    Thanks For your help

  • EVDRE error Validatememberset:error 1004-Method'~' of object '~' failed

    Hi
    Gurus
    when i have memberset expansion col time to have NOEXPAND i have this error
    i donot want my time col to expand after the first time so i am using NOEXPAND
    if i donot have NOEXPAND and just say BAS EVDRE = OK
    any ideas to clear this issue
    thanks

    Hi beee take a look to this note this might help you,
    [here|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1573106]
    [here|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1546179]
    [HERE TOO|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1448836]
    hope it helps,

  • Evdre error using "dynamic hierarchy expansion" option

    Dear all,
    I'm trying to expand the evdre using the option "dynamic hierarchy expansion", but I get an error in function EVDRE(). This is the error:
    #ERR: Consolidation Mode ON - Only keyword ""Blank"" is applicable for dimension ENTITY when with dimension GROUPS.
    I have not put any value on the memberset of of the entity expansion according with the error message. Here you have the example:
    PARAMETER      EXPANSION 1           EXPANSION 2
    ExpandIn            COL                 COL
    Dimension          GROUPS                 ENTITY
    MemberSet         DEP,PARENTAFTER     
    BeforeRange          
    AfterRange          
    Suppress            Y     
    Insert          
    The following link helps to understand how it works: http://help.sap.com/saphelp_bpc75/helpdata/en/5A/69200C88AA40C9B18844A25259F147/frameset.htm
    Thanks,
    Ru

    Hi Teko,
    Thanks for the information.
    In that case, I think Active X has not been enabled in IE.
    Kindly follow the below step.
    In IE, Tools-> Internet Optios -> Security -> Security level -> Change it to medium or go to custom level -> and enable Active X
    Hope this helps.

  • EVDRE error "encountered problem when retrieving data from webserver"

    Hi,
    in a EVDRE we always get the error "encountered problem when retrieving data from webserver"
    When analysing this further we noticed this is always generated when a base member is selected in the CV and the expansion on the row for this dimension is has one of the following expansion settings:
    DEP
    ALL
    NOEXPAND
    if we select SELF, the error disappears again and the EVDRE works fine again ... is this normal behavior?
    there is no problem with application nor dimension.
    D
    solved it

    Note that the keyword "ALL" does not include the member itself. This may cause some confusion, but as Harish implies, when you select a base member it finds no matches if your memberset is "ALL".
    If you want to design a report to handle the user moving back and forth between base and non-base members in their CV, you either need to include SELF,ALL or SELF,DEP, or something similar....
    OR you need to get a little fancier, and use EVPRO to look and see if the CV member is base -- evpro(app,member,"CALC") -- and then use some conditional logic in Excel to choose the correct expansion options. If Calc=N, use Self, otherwise use SELF,DEP or whatever you choose. This can be a bit tricky if you then want the user to be able to drill down in the report (especially if you want the workbook option to insert add'l rows on the expansion, rather than replace), but it's all possible.

  • EvDRE Error Message

    Hi,
    When I am sending data through Input Schedule prepared through EvDRE Function, the system is sending data
    successfully but I am getting an Error Message saying -
    Execute BaseLogic : Invalid Dimension ACCOUNT in lookup.
    What is the implication/meaning of this Error? 
    If anybody is aware of this pls let me know as soon as possible.
    Thanks,
    Viral

    The issue is related to your application's use of the SYSTEMCONSTANTS file, called by the Default logic.  Th esystem constants file is in the AdminApp, APPNAME, file directory.  Inside this file, the application assigns variables to each core dimension TYPE, and builds relationships for the FX translations.
    Look at the *FUNCTION ACCOUNTDIM=ACCOUNT statement and make sure that your named account dimension is in place of "ACCOUNT".  This is tru for all the dimension names.
    Hope this helps.

  • EVDRE-Error: #ERR: -2147024894

    Hi,
    I am using
    BOPC 7.5 NW Client, SP3
    OS: Windows 7 (32-bit), Patchlvel B
    When I am opening an existing EVDRE-report, I am getting the error:
    #ERR: -2147024894-Ungültige Wurzel in Registrierungsschlüssel "HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell FoldersPersonal".
    This folder doesn't exist in my registry.
    When I try to create a new report using EVDRE, no dimensions are displayed in the list, so I can't add them to rows or columns.
    I tried already to delete all client-side files, uninstall and Install Client again, inactivate and activate the "Planning and Consolidation" Add-In for Excel... didn't help.

    Go to eTools-> Client Options----> Clear Local Application Information

  • BPC - EVDRE error - values on YEAR level do not appear

    Hi everyone.
    I have a Time dimension with YEAR, QUARTER and MONTH level.
    When I do an EVDRE report and I select an especific YEAR (ex. 2011) and I set the MemberSet Expansion to SELF, it didn´t bring any value.
    On the other hand, when I set SELF, DEP or even SELF,DEP,BAS, the values on the QUARTER and MONTH cells appear just fine!
    PS: The Option SumParent is blank.
    I've done a test with EVGET, selecting TIME:2011, and it brings the value with no problem. So this proves that the Time Hierarchy is working fine, and the problem is on EVDRE.
    Any sugestions?
    Thanks in advance.

    Hi,
    what is your BPC verion & patch ?
    I also facing similar issue(bpc7.5nw sp10) i'm getting only at base level,  not at parent level(quarter/year).
    In your case quarter is working.

  • EVDRE Refresh error in BPC 7M

    Getting a evdre error when trying to refresh data. When tried to process the application or optimize the application, getting the error
    Error message:: CreateOLAPCubeForApplication:CreateCube:Internal error: The operation terminated unsuccessfully.
    Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactBVP, Column: TIMEID, Value: 10000003.
    Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
    Errors in the OLAP storage engine: An error occurred while processing the 'BVP' partition of the 'BVP' measure group for the 'BVP' cube from the SOPM database.
    Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
    I have already run the select statetmeent that matches the above table with member table, and there are not anomolies
    Any quick clues to resolve would be much appreciated
    Thanks
    Muthu Ranganathan

    This question is answered. The issue is that there was a mismatch between the facttable and the member table
    By running this query, for each dimension was able to figure out if there was differences. There were some members created in keyfigure that were not accurate, probably created due to some script logic.
    Select * from tblfactBVP where KEYFIGURE not in (select ID from mbrKEYFIGURE)
    Posted for the benefit of anyone else coming across the same issue
    Regards
    Muthu

  • EvDRE Log error 7:

    Can anyone provide any insight into this error noted in the evDRE log file:
    Error: 7-Out of memory
    What exactly is out of memory-server or client? OLAP or SQL? I am running a large report that does not finish-gets the white evDRE error/message box.

    At what point do you receive the error? Expand? Query? Refresh? ...
    Have you tried to minimize the report?
    This error should be referring to the serveru2019s memory, (I'm not sure of your exact error).
    Try running the same report and monitor your serveru2019s memory usage.
    Also monitor you clientu2019s memory usage while running the report. It might be your clients if you are doing a huge amount of excel calcs/functions.
    If you are using Citrix, it might be the Citrix servers memory, (doubt it).

  • BPC 7.5 NW: Inserting an excel formula the data col. in an EVDRE input sch.

    Hello,
    I am trying to design an input schedule for uploading trial balances from SAP. In one sheet, I have an extract of a trial balance from SAP. In another sheet, I have an EVDRE report which has an expansion in rows based upon the entities selected (so that the entities selected for data upload could match the entities in the trial balance. It is flexible for different users/regions).
    The problem is that I would like to use a VLOOKUP or SUMIF formula to populate the data column in the EVDRE report (pull the data from the trial balance sheet). But as soon as the data is submitted, the formula will disappear and I will just have data.
    Does anybody have any ideas as how this could be avoided.
    Many thanks.

    1. Login into BPC for Admin
    2. Once logged into your Appset , open the Dimension library
    3. Process each dimension by selecting the "Process members from membersheet" and by unchecking the "Take system offline" option
    4. Process all the dimensions one by one not together.
    5. Once processing the dimensions is done then open the Applications and Modify each Application by adding or changing the Application Description.
    6. Once done modifying Applications then logout of the BPC Admin and BPC Excel.
    7. Login back again into BPC for Excel by going through the connection wizard.
    Ideally this should solve your problem and If all the dimensions are processed successfully then logoff and login to see if you stilll see the EVDRE error.
    Hope this helps.
    Regards,
    Sanjeev

  • BPC 7.0 MS upgrade - EVDRE:OK not displaying in templates and reports

    Hello again,
    A strange behaviour in EVDRE templates and reports is noticed:
    Version - BPC 7.0 MS
    EVDRE templates and reports (built in 5.1, working fine) are migrated along with the appset in BPC 7.0.
    Found that the EXPANDALL doesn't work neither shows error or hangs. But the reports are refreshed for CV selection.
    While checking the control panel, noticed that the 'EVDRE:OK' is missing, cell is blank/ orange shaded, No EVDRE errors.
    This applies for the sample EVDRE templates as well as complex reports with multiple EVDREs.
    If we logout and re-launch the BPC Excel / Reports again, it is working as usual.
    The occurance of this behaviour is quite frequent or we missing any setting.
    Does anybody encountered this and throw some light to troubleshoot.
    Thanks.
    Warm Regards
    Uma

    Hi Wellington,
    Have tried those options.. its unstable behaviour.
    Noticed that this issue happen only when we switch over to multiple BPC enviroments. Working on DEV - Excel templates and switch over the QA or PRD environment with the same template open...
    The issue happens.. EVDRE:OK doesn't show, in the cell A1, click F2 , we can see this formula =EVDRE($B$57,A6:B13,A19:B25) and hitting ENTER , responds nothing. A1 cell is blank.
    WorkAround :: I shut down EXCEL, relaunch again.
    I have experienced this only in BPC 7.0.112, earlier 5.X no issues.
    Experts,
    Please confirm whether this is a product bug.
    Rgds
    Uma

Maybe you are looking for