Evdre using EVCOM function

Hi Friends,
I am working on an EVDRE on BPC 7.5 , I would like to know how can i use the EVCOM function.i am running a report in Finance application to see the record i have added using Finance Input schedule. For reference i have given my comments and below are the parameters of my EVDRE.
PARAMETER     EXPANSION 1     EXPANSION 2     EXPANSION 3
ExpandIn          COL          ROW          ROW
MemberSet     BAS(2011.TOTAL)     60100          SELF
EVDRE looks as below. and i wanted to see the comments i have put in Input template for 60100 and 1002 cost center.I tried using EVCOM and data range i have selected a cell and app as finance and members as cost center and GL account.
App                        Finance
COSTCENTER     1002
DATASRC                         TOT_DATASRC
GEOGRAPHY     G_TOT_GEO
GLACCOUNT     60100
MANDA          TOT_MANDA
MEASURES     PERIODIC
RPTCURRENCY     PC
TIME          2012.TOTAL
VERSION          WORKING_FORECAST
Regards,
Sanjeev

Probably you should double check if you have your intersections correct...

Similar Messages

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

Problem while Sending data concurrently using Evsnd function.

Hi All,
i am trying to send data from input schudule using evsnd function.
As per a test scenerio.
User 1: one user( cantains all bas members) , opens the input schudule , waits for and hour and do planning for few basmemebers and then submit the data.
User 2:another user ( subset of all base members) ,opens input schudule ,do planning and submits the data.
Now when user 1 Sumits the data , it overwrites the value of user 2.
is there is any way by which we can restrict user 1 of sending those value only that he/she changed.
Edited by: Tapeshwar Singh Bagal on Mar 11, 2009 11:02 AM

First, I'd strongly encourage you to use EVDRE instead of EVSND, as it gives a lot better control over many aspects of the input schedule.
As to your point, EVDRE definitely will only send back to the server the cells which have changed. It's been a few releases since I used EVSND (and its behavior may have changed some in the meantime), but if I recall correctly, it also does some of this same checking.
Another option to consider is to make the input schedule smaller (fewer accounts or entities or products or whatever your dimensions), and split it into two pieces, one for each of the business processes that the 2 users are performing.
If the 2 users are maintaining the same intersection of data, and performing the same business process (acting as a team, for example) then BPC has limited ability to support "checking out for edit" or locking the data for one user, in a way that prevents another user from changing it. The "park n go" feature does this in a way, but it's something that the user needs to do intentionally. That doesn't sound like your User 1 scenario of waiting for an hour before submitting -- probably when they opened it up, they thought it would only take 2 minutes, but then the phone rang, and then an email.... and then finally they finish it an hour or 8 later.

EVCOM Function!!

Hi Experts,
I have a query regarding EVCOM function, In following EVCOM function syntax can we use only Base level members while posting comments or comments can be posted for parent level members also?
Syntax: EVCOM(CommentRange,AppName,Member1,Member2, and so on)
Thanks & Regards,
Rohit

Hi Jorg,
Thanks for you reply.
I have tried storing comment for parent members, the issue I am facing that each time I click on submit button (calling MNU_ESUBMIT_REFRESH) without any changes it creates another row of comment for same set of members in database.
Please Advice!!
Thanks & Regards,
Rohit

Can not use TOUCH function on Nokia 6600 slide

Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of order

As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

Can we use replace function in bursting control file?

Hi All,
Greetings!!!!!!!!!!
Have a doubt can we use sql functions like replace,nvl,decode.. in xml bursting control file.
Please let me know if there is a option.
awaiting reply...
Thanks
Rajesh

In Expression operator or in Filter, etc. you can type function name by hand.
Oleg

Can we use Evaluate function in Prompt

Hi all
Can we use Evaluate Function in Dashboard Prompt?
I need some exposure on how to use it.
I am working on a HRMS-OLTP Source where I need to work with Oracle Functions from OBIEE.
IF somebody can tell me that, It will be a favour for me....
ThanQ
Anand V

Hi All,
Here's an example of how to use evaluate. This use calls the Oracle TO_DATE function: EVALUATE('TO_DATE(%1,%2)' as DATE, '03/03/2009', 'MM/DD/YYYY')
Here's how it works: EVALUATE( '<FUNC>' AS <DATATYPE>, VALUE1,VALUE2,etc)
FUNC) Is the syntax for the function you are calling. Any parameters have to be replaced by %<number>, where number refers to the order in which you specify your parameters.
DATATYPE) The datatype that the function will evaluate to. In this case, DATE.
VALUE1) The latter part of the formula is a comma separated list of all the parameters used in the function. In this case, it's the date I want to cast
VALUE2) This is the second parameter. You need as many as you referenced in your function. In this case, it's the date format.
Good luck and if you found this post useful, please award points!
Best regards,
-Joe

Can we use Evaluate Function in Dashboard Prompt

Hi
Can anybody tell me
Can we use Evaluate Function in Dashboard Prompt.
If yes...How
Thanks in Adv

Yes ! You Can!
while creating the dashboard prompt, under "Show" pick SQL results and you write the SQL statement and include the EVALUATE function.
I have several such examples. Most of of dashboard pages are parameter driven.
1. 1st paratmeter - users specify the dates
2. 2nd parameter - constrains the results for the period specified in 1st paramter and my SQL for 2nd paramter looks like this -
SELECT table1.column1
FROM table, datedim1, table1,table2
WHERE datedim1.date BETWEEN EVALUATE( 'TO_DATE(%1,%2)','@{presentation variable1}','dd/mm/yyyy') AND EVALUATE('TO_DATE(%1,%2)', '@{presentation variable 2}','dd/mm/yyyy')
HTH
Mahesh

Can we use SOUNDEX function in OWB?

Hi
Can we use SOUNDEX function in OWB. If yes then how?
Regards
Vibhuti

In Expression operator or in Filter, etc. you can type function name by hand.
Oleg

Convert smartform output in to PDF using CONVERT_OTF function how to do it

Hi Anil , and Hi All
         I am trying to display smartforms output in java webdynpro
         for that i have got the following code in sdn.
           can anybody please clarify these doubts in the below code
           1) What are the mandatory input and output parameters
               I have to pass here in this code to my application
           2) please check my previous post also in this regards please
   . Please reply at the very earliest. Check the below code
Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
It is copied from my prg. I hope you understand it.
public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetQuote(ServerEvent)
wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
if (pdfOutput != null)
try
String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
PrintStream ps = new PrintStream(fileOutputStream);
ps.print(pdfOutput);
ps.close();
//Display the PDF to the browser
String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
window.removeWindowFeature(WDWindowFeature.MENU_BAR);
window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
window.open();
// To collect all the file created in the server by user
quoteFiles.add(quoteFiles.size(), pdfResoucePath);
} catch (Exception e)
throw new WDRuntimeException(e);
//@@end

Hi
    ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest. Every answer will be rewarded.
regards
jalandhar

FR Studio 11.1.1.3 : You're not authorized to use this function...

Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle     Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle     Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle     java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
     ... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory     Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory     5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
     at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
     at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
     at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
•     02. installer - V17382-01.zip
•     03. foundation 1 of 4 - V17397-01.zip
•     03. foundation 2 of 4 - V17369-01.zip
•     04. architect - V17398-01.zip
•     08. financial reporting - V17378-01.zip
•     11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJK

Denis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

How to avoid use of function module in case of background jobs?

Hi ,
I am working a file tranfer interface .Functionality is to extract file either apllication or presentation server , and process the file through bapi , send the result in their respective server. This program should run through batch jobs in background mode.
I am using following function module :
SUBST_GET_FILE_LIS : Get the file list from application server
TMP_GUI_DIRECTORY_LIST_FILES : Get the file list from presentation server
GUI_UPLOad : to extract file data from presentation server
GUI_downLOAD : to download data to presentation server
in case of background job these function modules will not work.... so how to resolve this issue...
what are the methods we can apply?
Thanks & Regards
Sandeep

Hi,
This FM is used to get list of files from Application server (will work in Background). This cannot be used to list files from presentation server. There is no way , by which you can process presentation server files in background mode.
Regards
Vinod

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

Evdre using EVCOM function

Similar Messages

Maybe you are looking for