Even after I did all of the steps listed on various forums, the SSL 3.o or TLS 1.0 erroe will not disappear. Please Help!

Ever since last sunday, whenever I try to purchase an app from itunes, I always get this error explaining that I cannot establish a secure connection. I made sure TLS 1.0 and SSL 3.0 were enabled in options and I made sure the firewall was notblocking itunes, and I made sure that the host file was not blocking itunes.
I've done everything, please help?

I have become ridiculously desperate. Itunes works for everyone else on my connection excepr e. I'VE TRIED EVERYTHING. I UNINSTALLED ALL SECURITY SOFTWARE AND CHECKED MY HOST FILE. NOTHING IS WRONG AND STILL ITUNES DOWN RIGHT REFUSES TO WORK. SOMEBODY PLEASE HELP ME!!!

Similar Messages

My itunes wont sync with my iphone at all, even after i did all of the steps given to me by apple. what should I do?

my itunes wont sync with my iphone at all, even after i did all of the steps given to me by apple. what should I do?

A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.
Troubleshoot the spinning beach ball

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without.

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

The iphoto and itunes will not open please help

on my Mac G5 the iphoto and itunes will not open can anyone help

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Then, hold the Option key down when trying to open iPhoto, does it ask where it's Library is? Or what exactly happens?

Youtube freezes even after going through all the solutions

After, deleting cookies, resting firefox, re installing firefox, factoring defaulting firefox literally exhausting every solution on your website when i launch youtube it crashes my firefox browser, even the borders of the window for firefox goes crazy. At this point im so frustrated im ready to permanently uninstall firefox

Have you tried disabling HWA?
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

My itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

my itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Kernel panic keeps happening even after I did the factory reset. any suggestions ?

kernel panic keeps happening even after I did the factory reset. any suggestions ?

Hi Hallry,
Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Firefox cannot load websites, but IE can, even after I tried all the ideas in the current articles on this topic as of March 10, 2011!

Firefox cannot load ANY websites, but IE can, even after I tried all the ideas in the current articles on this topic as of March 10, 2011!
One day it was fine, and the next day it stopped working! I have tried everything suggested under the topic "Firefox cannot load websites but other programs can."

You should e able to install FlashPlayer separately on IE and Firefox. So you may use Flash 11.3 on IE and 11.2 or 10.3 on Firefox.
Work from the administrator account. First of all sort out Firefox, use the Adobe uninstaller to uninstall Flash before reinstalling 11.2 Afterwards check that IE is ok, the Uninstaller may have changed that so you may need to reinstall Flash on IE.
* see instructions in [[flash 11.3 crashes]]
You are apparently using an outdated Firefox 8. That is not secure you should update to the latest Release Firefox 13 (or within a day or so Firefox 14)
You may also encounter problems relating to use of RealPlayer software and that software may affect use of FlashPlayer 11.3
* see also [[Fix problems with RealPlayer add-ons]]
* a user ''blacksabath710'' recently posted a workaround in [/questions/931055] suggesting use of free software from http://www.dvdvideosoft.com/
P.S.
When you finish set Firefox's FlashPlayer not to upgrade, and until this issue is resolved do not follow suggestions from Adobe, or Plugincheck etc. to upgrade Flash.
Use this test page form Adobe in each browser and account to check Flash is working ok
* http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
The test page will display version information and error messages or a Flash animation to prove flash is working.

Iphone says messages is taking up 6GB of storage, even after I deleted all my messages. What is wrong?

iphone says messages is taking up 6GB of storage, even after I deleted all my messages. What is wrong? This is preventing me from downloading the most recent iOS, not to mention numerous other things. Thanks for any help! I am at a loss of what to do.

For that much storage being taken up the only thing that can be done as of now is back the device up in iTunes and restore the iphone. The restore will also update the phone.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

Hi QuisB123,
If you are having an issue with reclaiming free space after deleting photos from your iPhone, use the steps in this article to assist -
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
Specifically -
Orphaned files might remain on your iOS device if it's physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, you might see a large amount of "Other" disk usage for the iOS device in the Capacity indicator in iTunes. Try these steps:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes. If you see the "Not enough free space" alert, continue to step 5.
Turn off the automatic syncing functions for the iOS device:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes. If you see the "Not enough free space" alert, continue to step 6.
Restore using iTunes.
Thanks for using Apple Support Communities.
Best,
Brett L

I keep getting a Warning that I'm running out of disk space. Even after I deleted all of my photos and e-mail I still show 0 available. Please help!

I keep getting a Warning that I'm running out of disk space. Even after I deleted all of my photos and e-mail I still show 0 available space. Please help!

Correct KiltedTim the iPhone does not have a disk drive, and it does give an error message about running out of disk space. I'm here searching for how to clear it and/or what causes it. A friends 8gb iphone 3G has started giving her that message. It is not jailbroken, has no videos, 400 songs, 20 apps. The system information says there is 0 bytes free. There is 4.6 Gb of "other" data taking up the remaining free space. None of the few apps on the phone I expect would take up that much space with data. Even her emails and saved text messages shouldn't fill 4GB. New iPhone coming in the next couple of days. Easiest to just reset the old one after the upgrade and redownload the apps to make sure not to mess things up.

Even after I did all of the steps listed on various forums, the SSL 3.o or TLS 1.0 erroe will not disappear. Please Help!

Similar Messages

Maybe you are looking for