Even after restarting my browser and activating my smart print add on, smart print still won't work.

I installed the smart web printing which didn't work.  Then months later I found the updated Smart Print that requires installing the Bing bar, which I did.  Both add ons are installed, activated, and my IE9 has been restarted.  However, all I get when I click on the smart print button is a new tab opens up that is an exact copy of the tab I have open.  My Smart print experience looks nothing like the video where HP shows the tool in action.  What gives.

Thanks for replying.
With it connected via WiFi, the printer component of the MP600R uses a Canon proprietary protocol called canonijnetwork to advertise itself on the network. The scanner component uses an Apple protocol called Bonjour. Since you were able to add the scanner then it shows that Bonjour is working and your issue is with the Canon protocol.
One thing to note about the canonijnetwork protocol. It can take several seconds longer than Bonjour to make the printer appear. So when you click add, you will see the scanner first. And if you wait another 10 seconds, you should see the printer.
If the printer still fails to appear, it can be due to a driver issue, as it includes this canonijnetwork module. So I would suggest that you connect the MP600R to the Mac via USB. If a driver is needed, it should be automatically downloaded v10.72.1.0 from Apple. With this USB connected printer now in Printers & Scanners, check that you can print. If you can, then disconnect the USB cable and see if you can now add the wifi connected printer.
One final note. If the above all works for you, remember to remove the printer that was created for the USB connection. If you try to print to this, it will always give you an error as it is no longer connected to the Mac.

Similar Messages

  • Downloaded firefox and after all the drivers and all are loaded ..... it still won't open to get on-line..... any reason why

    i get this box that says your firefox profile cannot be loaded......it may be missing or inaccessible...... i just uninstalled it and re installed and this is what i get

    Hello grudgeboy
    press Windows key + R to open the Run box then type '''%APPDATA%\Mozilla\Firefox''' (or copied/paste from here) and click "OK" to quickly open the appropriate folder,
    then find [http://kb.mozillazine.org/Profiles.ini_file profiles.ini] fileand rename it (right-click on mouse and select rename) to '''profiles.iniOLD''' , then when you start firefox again, a new default profile folder will be created and only a single profile, the new "default", will be listed in the Profile Manager.
    This new "default" profile doesn't contain any of the profile data or settings stored in your old "default" profile folder, which still exists but is no longer accessible from the Profile Manager.
    Your existing Firefox user profile data, which includes bookmarks, passwords, cookies, preference settings and added extensions, will no longer appear in the new profile but you [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox can transfer the data from the old profile folder to the new default profile folder].
    see also : [https://support.mozilla.org/el/kb/Recovering%20important%20data%20from%20an%20old%20profile#os=winxp&browser=fx21 Recovering important data from an old profile]
    thank you

  • HT1349 My Apple MacBook Pro won't start up.  It is stuck on grey screen and I reset all of the stuff.  It still won't work also half the screen goes dark then you have to shake it till it goes back on.  Please help.

    MacBook Pro     Older version with grey keyboard

    You might have better luck posting on the Mabook Pro discussion forum, as this is the OS X Xserve server forum.
    Have you tried booting it from a DVD? If so and you find the same result, then its probably a hardware issue.

  • When ever I customize the toolbar the open new tab sign that is the + sign near the lastly opened tab in the tab bar disappears and it remains so even after restarting Firefox.

    When ever I customize the toolbar, the open new tab sign that is the + sign near the lastly opened tab in the tab bar disappears and it remains so even after restarting Firefox. This happens only after updating to the new version 4.0.1 it never happened in the older versions 3.x.xx- checked it thrice. Thought it could be a bug and i didn't know where to report also don't have time and patience to search for the appropriate page so i'm reporting here for improving my favorite browser.

    You can find the New Tab button showing as a '+' on the Tab bar.<br />
    You can open the Customize window and drag the New Tab button from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
    If you want the New Tab button at the far right end of the Tab bar then place a flexible to the left of it.<br />
    *New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

  • FireFox remembering last website state, even after restarting, clearing history, cookies,cache etc. No other does this (IE,Chrome,Opera...)

    On the website, after 3-4 login attempts and an error message appears. You cannot retry unless you exit out of the browser(s) completely.
    I closed all FireFox browsers, opened a new browser and cleared Recent History will all checked. Closed the browser and restarted the browser again. Going to the website, the error message page is displayed and not the login page.
    With IE (also Chrome and Opera), after closing all the browser window(s) and restart browser and then go the website, I get to the login page, not the error message page.
    It sounds like FireFox is keeping something around (even after clearing everything out) and the website is remembering you in some way.

    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to Help Menu -> select '''Restart with Add-ons Disabled'''
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on ALL Options -> click '''Clear Now'''
    -> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' and click '''Reset to Default''' button
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries
    -> go to Tools Menu -> Options -> Advanced -> General -> Remove Checkmark from '''Warn me when websites try to redirect or reload the page'''
    -> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
    -> Click OK on Options window
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
    -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

  • Unresponsive system but mouse still moves; even after restart

    I was transferring a few files over my LAN wirelessly via file sharing to another macbook (B) when that macbook was closed and caused a disconnect. My macbook (A) has experienced issues since this disconnect. Even after restarts and resetting the pram, my system is unresponsive. The mouse will move but I cannot open applications, folders, files, or even the menu. It is as if my mouse is moving over top a picture of the desktop. I did manage to click and highlight my HD icon once but as soon as I did, the color wheel showed up and never stopped. My hard drive has over 10GB of space free. I was able to do a target disk boot and test the drive and its ok according to disk utility. Any ideas about what I could do would be greatly appreciated...preferably without wiping the hard drive.

    The first issue occurred while I was transferring large files from one computer to another via afp file sharing over my wireless network. In the middle of this transfer, someone closed the receiving macbook. The macbook sending the files didn't respond well after this. It would intermittently freeze without a linked resource draining process. I believe the first occurrence was when I tried to right click a file that had been interrupted during transfer. I forced a restart, used the killall Finder command in terminal thinking that it might still be trying to transfer the file to a ghost in some way...even though that didn't make sense. I was able to verify and repair the external drive the file was on. After doing this and resetting the PRAM, it was back to normal for a little while. After a bit of normal activity (nothing strenuous), it began to freeze again. I tried the same steps and also booted in target disk mode so I could use the other macbook to run diagnostics. The drive got repaired. I attempted to restart the affected macbook but I couldn't do anymore than one thing and the never-ending colorwheel would appear. That one thing could be a single click on a file or an attempt of opening an application. After that I turned to this discussion forum after already impatiently attempting to safe mode boot and repair disk permissions. I tried this again with patience after your suggestion. It worked for a few hours and I was able to surf the web once more and go about the usual. I pulled up dashboard and pressed command+ to bring up the list of widgets and it froze on me again. I attempted previous steps again after restarting but there has been no difference in response. Throughout the entirety of this experience, there have been no error messages. Also, there's no difference in behavior if I disconnect everything but the power cable.
    Sorry for the lengthy post but hopefully it will be helpful.
    Message was edited by: AG_Jazz

  • How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

    How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
    == This happened ==
    Not sure how often
    == ALWAYS! ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

    Open Containing Folders is never active.

  • I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button

    I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
    I tried connecting the device to my computer and itunes said that it could not identify my device.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Indesign CS6 quits during document recovery, even after restart. How do I get out of this cycle?

    Indesign CS6 quits during document recovery, even after restart. How do I get out of this cycle?
    I was saving a document when it originally quit. so "locked" file appeared in directory as well as reg file.
    Upon restart of InDesign, recovery failed and software quit again.
    Restarted computer, then indesign, file opens but as soon as I select "recover" it sends a message that indesign needs to close.
    I cannot seem to get out of this cycle. Help.

    Use your operating system’s Search utility to find a folder called (InDesign Recovery) and delete it.

  • When the Mavericks download was complete (about 45 minutes), nothing happened, even after restarting. Still running 10.8.5

    When the Mavericks download was complete (about 45 minutes), nothing happened, even after restarting. Still running 10.8.5

    Look in your Applications folder. Is there a Mac OS X Mavericks installer in the folder? If there is then select it. Press COMMAND-I to open the Get Info window. See if the size of the file is around 5.3 GBs. If it is then try double-clicking on it to run it. If you cannot run it, then you have an incomplete download. Try it again. It's a very large file, and unless you have a really fast pipe it can take longer than 45 minutes to download.

  • I purhased an apple usb cd/dvd and I have a cd disk that won't eject even after going into controls and selecting disk eject any ideas how I can take of the issue?

    I have a cd disk stuck in my USB super drive, it won't eject even after going to control and selecting eject disk

    Hi BCservant,
    Welcome to the Apple Support Communities!
    I know that it can be concerning when you cannot eject a disk from your external drive. There are a few troubleshooting steps that I would recommend to help you get this situation resolved. Please use the attached article for troubleshooting information.
    Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
    Doesn't eject discs or discs eject slowly
    If the drive ejects discs slowly or appears to be struggling, insert and eject a single disc several times. Check the disc to see if it has a label or other material stuck to the disc that increases the thickness. Remove the label if possible.
    If the disc will not eject, try pressing the eject key on the keyboard. Some older keyboards may use the F12 key to eject discs.
    If the disc will not eject, try dragging the disc icon to the trash.
    If the disc will still not eject, try holding down the trackpad or mouse button after restarting the computer. The Superdrive should attempt to eject the disc.
    If the disc continues not to eject, reset the System Management Controller (SMC) and try steps 1-4 again.
    If the disc still does not eject, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional assistance.
    Best regards,
    Joe

  • Acrobat Pro for Mac won't start, even after restarting the machine.  Any suggestions?

    Acrobat Pro for Mac won't start, even after restarting the machine.  Any suggestions?

    Hi Patrick,
    Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
    Have you tried uninstalling and reinstalling the product after you started facing this issue.
    -Shashi

  • I have customized my Firefox toolbar. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it. How do I get my customization of the toolbar to become permanent?

    I have customized my Firefox toolbar several times. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it each time. How do I get my customization of the toolbar to become permanent?
    It has occurred with Firefox 4.0.1 and 5.0

    see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Take a picture of your toolbars so you can easily reconstruct them from the default after solving the the problem.
    If it happens to you it will probably happen again in the future so you might want to keep some copies of your modified localstore.rdf file so you can delete the bad one and rename one of the replacements in waiting. Saving, copying and renaming must be done with Firefox down, of course.

  • I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I have the same  problem. Have paid. Messages say I have downloaded it but the file is inaccessible apparently download is somewhere on my hard disk. How do I find it?? Is there not help at an Adobe phone service. If so what is the number to call??
    Roger Broughton

  • After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

    After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

    Have you run it in a debugger? That will show you exactly what is happening and why.

Maybe you are looking for