Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.

Hi All,
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Both the profile option have set at responsibility level.
Reagrds,
Sandesh

2785222 wrote:
Hi All,
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Both the profile option have set at responsibility level.
Reagrds,
Sandesh
Hi Sandesh,
First note that HR:Security Is for HRMS module for restricting data for respective OUs
MO:Security is for other Modules such as Inv, PO, AR, AP etc., for restricting data
Change the inventory Org to the one you want and then query data...
Hope it helps.
Regards,
Shahzad.H.Magsi

Similar Messages

  • Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

    hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • How can I change my original security questions? After changing my AppleID and password, I am not given an opportunity to change my security questions, which I cannot remember the answers to, so I cannot purchase any music.

    How can I change my original security questions? After changing my AppleID and password, I am not given an opportunity to change my security questions, which I cannot remember the answers to, so I cannot purchase any music.

    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service

  • Webi report would NOT refresh even after setting prompts and refreshing document instance.

    I am a .NET developer and a newbie to the world of BO I have just written a simple application in C# making use of the BO.NET Enterprise SDK and the ReportEngine.NET SDK to open a WEBI document and export it to Excel.  I have got the whole thing working - starting from establishing the EnterpriseSession, obtaining the reportEngine instance and also opneing the Webi document and exporting it to Excel. 
    The problem is the even after setting a different value for the prompts I ALWAYS get the same report  - for example if I set the Country prompt to India I always get the previous one that was set in the universe (Brazil).  These are not optional prompts and I do refresh the documentInstance after calling "SetPrompts"  Did anyone elase have the same problem with caching?.  Any help would be greatly appreciated.  Please find the snipped of the code attached.

    The link is correct, however you need access to SAP Service Market Place (SMP), which you should have since you are using BOE / BI. If not, ask your BOE / BI administrator to set you up with logon to SMP.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • Even after setting system preferences to Never accept cookies and having deleted all cookies, Safari continues to add cookies.  I've tried to reset safari but the problem persists.  How can make safari Never accept cookies.

    I'm having a problem with cookies on Safari.
    Even after setting system preferences to Never accept cookies and having deleted all cookies, Safari continues to add cookies.  I've tried to Reseting Safari several time but the problem persists.  This is occurring under two different user logins one of whom is an administrator the other a standard user.  How can I get safari to Never accept cookies?  This is a recent problem because in the past it used to work properly. Any idea what might be going on here?

    Hi David:
    I did read (yesterday in another thread) about a similar problem.  I cannot test it myself as I accept cookies (from sites I visit) and do not want to delete all of mine for a test.
    I do not know whether it meets your requirements, but you could turn on private browsing.  I use that (or Microsoft's variant on IE) when I use public computers.
    Barry

  • Flash causes "page contains secure and non-secure..."

    Hi All,
    I have a flash menu on my web store .php pages and am getting
    a "this page contains secure and non-secure items..." in IE7 in
    Vista. I think this is because of the Flash menus, but thought I
    had taken care of this by making the codebase embedding to
    "https://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
    Any suggestions on how to deal with this?
    Thanks, Scott

    Thanks so much ShadowKnyte for the reply. Turns out it wasn't
    the Flash menu, after all, as it did have the embedding links set
    to https. In fact, it was my Google analytics call at the end of
    the page. It needed to be changed to:
    <script src="https://ssl.google-analytics.com/urchin.js"
    type="text/javascript"></script>
    In case that helps anyone else out.
    Cheers, Scott

  • I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Hello,
    Can you tell us what versions of CUCM and CUxAC you are using?  Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application.  You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
    Thanks,
    Tony

  • The Outlook links do not connect to Firefox even after setting the customize option in Default Programs. Please help.

    The''' Outlook links do not connect to Firefox '''even after setting the customize option in Default Programs. Please help.

    Message to Toad-Hall
    Thank you, for that. To be sure, I tried your suggestion, and selected "System Proxy" as the choice, for Thunderbird and Firefox. Rebooted, and looked at the outcome.. NO Joy.. :-(
    I believe that I shall send the output of the Error Log in my next post. Perhaps someone can point me in the right direction after looking at the Error.log.
    Thank you...Toad Hall. If you think of something else to try, I am ALL ears.. I shall keep trying..

  • Still sleeping even after setting Energy Saver to Never

    I'm trying to use my 2.53 GHz (Late 2009) MM as a server but even after setting the 'Computer sleep' preference to 'Never' in the Energy Saver System Preferences panel, the MM still goes to sleep. This isn't a big issue for me since I can and have used Wake On Lan apps/scripts, but it's a major pain in the you-know-what for other people who need to access this server over the internet.
    Could there be some persistent overriding preference somewhere that is allowing this MM to go to sleep when in fact it should not be because of my setting? I've searched but can find anything.
    TIA for any help with this.

    Interesting... I had an EyeTV that I did install on an older G5 PowerMac that I stopped using before I migrated to this MM back in March. I'll check to see if the EyeTV app was also migrated over and uninstall it if necessary.
    I would have thought that the EyeTV software would default to a "Never Sleep" state considering it's purpose. I'll check this possibility out when I get home after the long weekend.

  • HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

    I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

    Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
    *To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
    *The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
    *I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
    Much Respect
    Lammo

  • Default vacation message sent even after setting new vacation message

    Even after setting a new vacation message, the default vacation message still
    gets sent out.
    <P>
    (See attachment)

    Hi huddie71,
    Thank you for your question.
    I've raised the limits on their mailbox, and the aforementioned connector settings, etc.,
    except the Organization Configuration / Hub Transport / Global Settings / Transport Settings / Maximum Receive and Send Sizes.      
    By my understand, we could modify the global settings by the following path:
    Organization Configuration / Hub Transport / Global Settings / Transport Settings / Maximum Receive and Send Sizes.      
    Because it will work on existed user and new user without explicit message size limits sets.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Hi Jim-Xu.  That would result in everyone getting an increased limit.  I only want one person to have an increased limit.  See the 2nd paragraph in my original post.
    -- huddie71 ~~If you~re not seeking help or offering it, you probably shouldn~t be here.~~

  • I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open.  Any suggestions.

    I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open.  Any suggestions.

    Resetting Printing System helps OS X recognize new printers.
    http://support.apple.com/kb/HT1341
    When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

  • I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I have the same  problem. Have paid. Messages say I have downloaded it but the file is inaccessible apparently download is somewhere on my hard disk. How do I find it?? Is there not help at an Adobe phone service. If so what is the number to call??
    Roger Broughton

  • How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

    How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
    == This happened ==
    Not sure how often
    == ALWAYS! ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

    Open Containing Folders is never active.

Maybe you are looking for